BAT62... Silicon Schottky Diode • Low barrier diode for detectors up to GHz frequencies • Pb-free (RoHS compliant) package 1) • Qualified according AEC Q101 BAT62 " BAT62-02W BAT62-03W BAT62-07W ! , " BAT62-09S $ ! , , , , 1 " # , BAT62-02L BAT62-02LS 2 ! BAT62-07L4 4 3 D2 D1 1 2 ESD (Electrostatic discharge) sensitive device, observe handling precaution! Type BAT62 BAT62-02L BAT62-02LS* BAT62-02W BAT62-03W BAT62-07L4 BAT62-07W BAT62-09S Package SOT143 TSLP-2-1 TSSLP-2-1 SCD80 SOD323 TSLP-4-4 SOT343 SOT363 Configuration anti-parallel pair single, leadless single, leadless single single parallel pair, leadless parallel pair parallel pair, high isolation LS(nH) 2 0.4 0.2 0.6 1.8 0.4 1.8 1.6 Marking 62s L U 62 L 62 62s 69s * Preliminary Data 1Pb-containing package may be available upon special request 1 2007-04-19 BAT62... Maximum Ratings at TA = 25°C, unless otherwise specified Parameter Symbol Diode reverse voltage VR 40 V Forward current IF 20 mA Total power dissipation Ptot Value Unit mW BAT62, TS ≤ 85 °C 100 BAT62-02L, -07L4, -03W, TS ≤ 108 °C BAT62-02W, TS ≤ 109 °C 100 BAT62-07W, TS ≤ 103 °C 100 BAT62-09S, TS ≤ 105 °C 100 100 Junction temperature Tj Storage temperature Tstg 150 °C -55 ... 150 Thermal Resistance Parameter Symbol Junction - soldering point 1) RthJS Value Unit K/W BAT62 ≤ 650 BAT62-02L, -07L4, -03W ≤ 420 BAT62-02W ≤ 410 BAT62-07W ≤ 470 BAT62-09S ≤ tbd Electrical Characteristics at TA = 25°C, unless otherwise specified Symbol Parameter Values Unit min. typ. max. IR - - 10 µA VF - 0.58 1 V ∆ VF - - 20 mV DC Characteristics Reverse current VR = 40 V Forward voltage IF = 2 mA Forward voltage matching2) IF = 2 mA 1For calculation of RthJA please refer to Application Note Thermal Resistance 2∆V F is the difference between lowest and highest VF in a multiple diode component. 2 2007-04-19 BAT62... Electrical Characteristics at TA = 25°C, unless otherwise specified Symbol Parameter Values Unit min. typ. max. CT - 0.35 0.6 pF R0 - 225 - kΩ AC Characteristics Diode capacitance VR = 0 V, f = 1 MHz Differential resistance VR = 0 V, f = 10 kHz 3 2007-04-19 BAT62... Diode capacitance CT = ƒ (VR) Reverse current IR = ƒ(VR) f = 1MHz TA = Parameter BAT 62 1.0 CT 10 3 EHD07062 uA pF 0.8 125°C IR 10 2 0.6 85°C 10 1 0.4 10 0 25°C 0.2 0.0 0 10 20 30 V 10 -1 0 40 5 10 15 20 25 30 V 40 VR VR Forward current IF = ƒ (VF) Forward current IF = ƒ (T S) TA = Parameter BAT62 10 4 22 mA uA 25°C -40°C 85°C 18 125°C 16 IF IF 10 3 14 12 10 8 10 2 6 4 2 10 1 0 0.2 0.4 0.6 0.8 1 1.2 V 0 0 1.5 VF 15 30 45 60 75 90 105 120 °C 150 TS 4 2007-04-19 BAT62... Forward current IF = ƒ (T S) Forward current IF = ƒ (T S) BAT62-02L, -07L4 BAT62-02W 22 22 mA 18 18 16 16 14 14 IF IF mA 12 12 10 10 8 8 6 6 4 4 2 2 0 0 15 30 45 60 75 90 105 120 °C 0 0 150 15 30 45 60 75 90 105 120 °C TS Forward current IF = ƒ (T S) Forward current IF = ƒ (T S) BAT62-03W BAT62-07W 22 22 mA mA 18 18 16 16 14 14 IF IF 150 TS 12 12 10 10 8 8 6 6 4 4 2 2 0 0 15 30 45 60 75 90 105 120 °C 0 0 150 TS 15 30 45 60 75 90 105 120 °C 150 TS 5 2007-04-19 BAT62... Permissible Puls Load RthJS = ƒ (tp) Permissible Pulse Load BAT62 IFmax / I FDC = ƒ (t p) BAT62 10 3 10 1 RthJS I Fmax/IFDC K/W D=0.5 0.2 0.1 0.05 0.02 0.01 0.005 0 10 2 10 1 -6 10 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 -5 10 -4 10 -3 10 -2 s 10 10 0 -6 10 0 10 -5 10 -4 10 -3 10 -2 tp s 10 0 tp Permissible Puls Load RthJS = ƒ (tp) Permissible Pulse Load BAT62-02L, -07L4 IFmax / I FDC = ƒ (t p) BAT62-02L, -07L4 10 3 10 1 RthJS IFmax/IFDC K/W 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 2 10 1 -6 10 10 -5 10 -4 10 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 - -3 10 -2 s 10 10 0 -6 10 0 tp 10 -5 10 -4 10 -3 10 -2 s 10 0 tp 6 2007-04-19 BAT62... Permissible Puls Load RthJS = ƒ (tp) Permissible Pulse Load BAT62-02W IFmax / I FDC = ƒ (t p) BAT62-02W 10 3 10 1 RthJS I Fmax/IFDC K/W D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 - 10 2 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 1 -7 10 10 -6 10 -5 10 -4 10 -3 10 -2 s 10 10 0 -7 10 0 10 -6 10 -5 10 -4 10 -3 10 tp -2 s 10 0 tp Permissible Puls Load RthJS = ƒ (tp) Permissible Pulse Load BAT62-03W IFmax / I FDC = ƒ (t p) BAT62-03W 10 3 10 1 RthJS IFmax/IFDC K/W D=0.5 0.2 0.1 0.05 0.02 0.01 0.005 0 10 2 10 1 -6 10 10 -5 10 -4 10 -3 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 -2 s 10 10 0 -6 10 0 tp 10 -5 10 -4 10 -3 10 -2 s 10 0 tp 7 2007-04-19 BAT62... Permissible Puls Load RthJS = ƒ (tp) Permissible Pulse Load BAT62-07W IFmax / I FDC = ƒ (t p) BAT62-07W 10 3 10 1 RthJS I Fmax/IFDC K/W D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 - 10 2 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 1 -7 10 10 -6 10 -5 10 -4 10 -3 10 -2 s 10 10 0 -7 10 0 10 -6 10 -5 10 -4 10 -3 10 -2 tp s 10 0 tp Rectifier voltage Vout = ƒ (V in) Testcircuit f = 900MHz RL = Parameter in kΩ 10 4 mV D.U.T 10 3 V VO 10 2 I R IN C 50 Ω 1nF L R L V0 10 1 10 0 1000 500 200 100 50 20 10 10 -1 10 -2 10 -3 0 10 10 1 10 2 10 3 mV 10 4 VI 8 2007-04-19 Package SCD80 BAT62... Package Outline 0.2 M A +0.05 0.13 -0.03 0.8 ±0.1 0.2 ±0.05 10˚MAX. 1.7 ±0.1 1 0.3 ±0.05 Cathode marking 7˚ ±1.5˚ 1.3 ±0.1 A 2 0.7 ±0.1 0.35 1.45 Foot Print 0.35 Marking Layout (Example) 2005, June Date code BAR63-02W Type code Cathode marking Laser marking Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø180 mm = 8.000 Pieces/Reel (2 mm Pitch) Reel ø330 mm = 10.000 Pieces/Reel Reel with 2 mm Pitch 2 0.2 2.5 8 1.45 Standard 4 Cathode marking 0.4 0.9 Cathode marking 9 0.7 2007-04-19 BAT62... Date Code marking for discrete packages with one digit (SCD80, SC79, SC75 1) ) CES-Code Month 2 0 03 2 0 04 2005 2006 2 0 07 2008 2009 2010 2011 2012 2 0 13 2014 01 a p A P a p A P a p A P 02 b q B Q b q B Q b q B Q 03 c r C R c r C R c r C R 04 d s D S d s D S d s D S 05 e t E T e t E T e t E T 06 f u F U f u F U f u F U 07 g v G V g v G V g v G V 08 h x H X h x H X h x H X 09 j y J Y j y J Y j y J Y 10 k z K Z k z K Z k z K Z 11 l 2 L 4 l 2 L 4 l 2 L 4 12 n 3 N 5 n 3 N 5 n 3 N 5 1) New Marking Layout for SC75, implemented at October 2005. . 10 2007-04-19 Package SOD323 BAT62... Package Outline 0.9 +0.2 -0.1 +0.2 1.25 -0.1 0 ±0.05 A 1.7 +0.2 -0.1 Cathode marking 0.45 ±0.15 2.5 ±0.2 2 1 0.3 +0.1 -0.05 +0.05 0.3 -0.2 0.15 +0.1 -0.06 0.25 M A 0.8 1.7 0.8 Foot Print 0.6 Marking Layout (Example) BAR63-03W Type code Cathode marking Laser marking Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 0.2 2 2.9 8 4 Cathode marking 0.65 1.35 11 1 2007-04-19 Package SOT143 BAT62... 2 0.1 MAX. 10˚ MAX. 1 1 ±0.1 0.2 0.8 +0.1 -0.05 0.4 +0.1 -0.05 A 5 0...8˚ 0.2 M A 0.25 M B 1.7 0.08...0.1 1.3 ±0.1 3 2.4 ±0.15 4 B 10˚ MAX. 2.9 ±0.1 1.9 0.15 MIN. Package Outline Foot Print 1.2 0.8 0.9 1.1 0.9 0.8 1.2 0.8 0.8 Marking Layout (Example) RF s 56 Manufacturer Pin 1 2005, June Date code (YM) BFP181 Type code Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 0.2 2.6 8 4 Pin 1 3.15 1.15 12 2007-04-19 Package SOT343 BAT62... Package Outline 0.9 ±0.1 2 ±0.2 0.1 MAX. 1.3 0.1 A 1 2 0.1 MIN. 0.15 1.25 ±0.1 3 2.1 ±0.1 4 0.3 +0.1 -0.05 +0.1 0.15 -0.05 +0.1 0.6 -0.05 4x 0.1 0.2 M M A Foot Print 1.6 0.8 0.6 1.15 0.9 Marking Layout (Example) Manufacturer 2005, June Date code (YM) BGA420 Type code Pin 1 Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 0.2 2.3 8 4 Pin 1 2.15 1.1 13 2007-04-19 Package SOT363 BAT62... Package Outline 2 ±0.2 0.9 ±0.1 +0.1 6x 0.2 -0.05 0.1 0.1 MAX. M 0.1 Pin 1 marking 1 2 3 A 1.25 ±0.1 4 0.1 MIN. 5 2.1 ±0.1 6 0.15 +0.1 -0.05 0.65 0.65 0.2 M A Foot Print 1.6 0.9 0.7 0.3 0.65 0.65 Marking Layout (Example) Small variations in positioning of Date code, Type code and Manufacture are possible. Manufacturer 2005, June Date code (Year/Month) Pin 1 marking Laser marking BCR108S Type code Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel For symmetric types no defined Pin 1 orientation in reel. 0.2 2.3 8 4 Pin 1 marking 1.1 2.15 14 2007-04-19 Package TSLP-2-1 BAT62... Package Outline Top view Bottom view 0.4 +0.1 0.6 ±0.05 0.05 MAX. 1 1) 1) 0.5 ±0.035 Cathode marking 0.25 ±0.035 2 1 1 ±0.05 0.65±0.05 2 1) Dimension applies to plated terminal Foot Print 0.6 0.275 For board assembly information please refer to Infineon website "Packages" Copper Solder mask 0.375 0.275 0.35 1 0.3 0.925 0.35 0.45 Stencil apertures Marking Layout (Example) BAS16-02L Type code Cathode marking Laser marking Standard Packing Reel ø180 mm = 15.000 Pieces/Reel Reel ø330 mm = 50.000 Pieces/Reel (optional) 0.5 1.16 Cathode marking 8 4 0.76 15 2007-04-19 Package TSLP-4-4 BAT62... Package Outline Bottom view 0.8 ±0.05 4 x 0.25 ±0.035 1) 0.75 ±0.05 0.05 MAX. 3 2 4 1 2 3 1 1.2 ±0.05 0.4 +0.01 4 x 0.35 ±0.035 1) Top view 4 0.45 ±0.05 Pin 1 marking 1) Dimension applies to plated terminal Foot Print For board assembly information please refer to Infineon website "Packages" 0.8 0.4 0.38 0.42 1.18 0.4 1.2 0.4 0.38 0.78 0.28 0.3 0.28 0.3 0.22 0.2 Copper Stencil apertures Solder mask Marking Layout (Example) BAR90-07L4 Type code Pin 1 marking Laser marking Standard Packing Reel ø180 mm = 15.000 Pieces/Reel 0.5 1.45 8 4 Pin 1 marking 1.05 16 2007-04-19 Package TSSLP-2-1 BAT62... Pa ckage Outline Top view Bottom view 0.31 +0.01 -0.02 1 0.62 ±0.035 2 2 1 0.2 ±0.025 1) 0.355 ±0.025 0.32 ±0.035 0.26 ±0.025 1) Cathode marking 1) Dimension applies to plated terminal Foot Pr int For board assembly information please refer to Infineon website "Packages" 0.19 0.24 Solder mask 0.19 0.57 0.14 0.62 Copper 0.19 0.27 0.24 0.32 Stencil apertures Mar king Layout BAR95-02LS Type code Pin 1 marking Laser marking Standard Pa cking Reel ø180 mm = 15.000 Pieces/Reel 0.35 0.73 Cathode marking 8 4 0.43 17 2007-04-19 BAT62... Edition 2006-02-01 Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2007. All Rights Reserved. Attention please! The information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 18 2007-04-19