1 3 TO -24 7 2 1 - Anode 1 2 - Common Cathode Back of Case - Cathode 3 - Anode 2 APT30D60BCT 1 2 600V 2x30A 3 ULTRAFAST SOFT RECOVERY RECTIFIER DIODES PRODUCT APPLICATIONS PRODUCT FEATURES PRODUCT BENEFITS • Parallel Diode • Ultrafast Recovery Times • Low Losses • Soft Recovery Characteristics • Low Noise Switching • Popular TO-247 Package • Cooler Operation • Low Forward Voltage • Higher Reliability Systems • High Blocking Voltage • Increased System Power • • • • • -Switchmode Power Supply -Inverters Free Wheeling Diode -Motor Controllers -Converters Snubber Diode Uninterruptible Power Supply (UPS) Induction Heating High Speed Rectifiers MAXIMUM RATINGS Symbol VR Density • Low Leakage Current All Ratings Are Per Leg: TC = 25°C unless otherwise specified. Characteristic / Test Conditions APT30D60BCT UNIT 600 Volts Maximum D.C. Reverse Voltage VRRM Maximum Peak Repetitive Reverse Voltage VRWM Maximum Working Peak Reverse Voltage IF(AV) Maximum Average Forward Current (TC = 100°C, Duty Cycle = 0.5) 30 RMS Forward Current 70 IF(RMS) IFSM TJ,TSTG TL Amps 320 Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) -55 to 150 Operating and StorageTemperature Range °C 300 Lead Temperature: 0.063" from Case for 10 Sec. STATIC ELECTRICAL CHARACTERISTICS Characteristic / Test Conditions MIN TYP IRM 1.5 IF = 60A Maximum Forward Voltage Maximum Reverse Leakage Current UNIT 1.8 IF = 30A VF MAX Volts IF = 30A, TJ = 150°C 1.6 VR = VR Rated 250 VR = VR Rated, TJ = 125°C 500 µA CT Junction Capacitance, VR = 200V 40 pF LS Series Inductance (Lead to Lead 5mm from Base) 10 nH USA APT Website - http://www.advancedpower.com 405 S.W. Columbia Street Bend, Oregon 97702-1035 Phone: (541) 382-8028 FAX: (541) 388-0364 F-33700 Merignac - France Phone: (33) 5 57 92 15 15 FAX: (33) 5 56 47 97 61 EUROPE Avenue J.F. Kennedy Bât B4 Parc Cadéra Nord 053-6016 Rev - Symbol APT30D60BCT DYNAMIC CHARACTERISTICS Symbol Characteristic MIN TYP MAX 65 trr1 Reverse Recovery Time, IF = 1.0A, diF /dt = -15A/µs, VR = 30V, TJ = 25°C 50 trr2 Reverse Recovery Time TJ = 25°C 50 trr3 IF = 30A, diF /dt = -240A/µs, VR = 350V TJ = 100°C 80 tfr1 Forward Recovery Time TJ = 25°C 155 tfr2 IF = 30A, diF /dt = 240A/µs, VR = 350V TJ = 100°C 155 IRRM1 Reverse Recovery Current TJ = 25°C 4 10 IRRM2 IF = 30A, diF /dt = -240A/µs, VR = 350V TJ = 100°C 7.5 15 Qrr1 Recovery Charge TJ = 25°C 100 Qrr2 IF = 30A, diF /dt = -240A/µs, VR = 350V TJ = 100°C 300 Vfr1 Forward Recovery Voltage TJ = 25°C 5 Vfr2 IF = 30A, diF /dt = 240A/µs, VR = 350V TJ = 100°C 5 Rate of Fall of Recovery Current TJ = 25°C 400 IF = 30A, diF /dt = -240A/µs, VR = 350V (See Figure 10) TJ = 100°C 200 diM/dt UNIT ns Amps nC Volts A/µs THERMAL AND MECHANICAL CHARACTERISTICS Symbol Characteristic / Test Conditions RθJC Junction-to-Case Thermal Resistance RθJA Junction-to-Ambient Thermal Resistance WT Torque MIN TYP UNIT MAX 0.90 °C/W 40 0.22 oz 6.1 gm Package Weight 10 lb•in 1.1 N•m Maximum Mounting Torque (Screw Type = 6-32 or 3mm Machine) 1.0 D=0.5 0.2 0.1 0.1 0.05 0.05 0.02 0.01 0.01 NOTE: SINGLE PULSE PDM Z JC, THERMAL IMPEDANCE (°C/W) θ 0.5 t1 0.005 t2 053-6016 Rev - DUTY FACTOR D = t1 / t2 PEAK TJ =PDM x Z JC + TC 0.001 10-5 10-4 10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (SECONDS) FIGURE 1, MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs PULSE DURATION 10 APT30D60BCT 1600 Qrr, REVERSE RECOVERY CHARGE (nano-COULOMBS) 80 60 TJ = 150°C TJ = 100°C 40 TJ = 25°C TJ = -55°C 20 0 0 0.5 1.0 1.5 2.0 2.5 VF, ANODE-TO-CATHODE VOLTAGE (VOLTS) Figure 2, Forward Voltage Drop vs Forward Current 1200 60A 800 30A 400 15A 0 10 50 100 500 1000 diF /dt, CURRENT SLEW RATE (AMPERES/µSEC) Figure 3, Reverse Recovery Charge vs Current Slew Rate 40 2.0 TJ = 100°C VR = 350V 60A Kf, DYNAMIC PARAMETERS (NORMALIZED) IRRM, REVERSE RECOVERY CURRENT (AMPERES) TJ = 100°C VR = 350V 30 20 30A 15A 10 0 0 200 400 600 800 1000 diF /dt, CURRENT SLEW RATE (AMPERES/µSEC) Figure 4, Reverse Recovery Current vs Current Slew Rate 1.6 Qrr trr 1.2 trr IRRM 0.8 Qrr 0.4 0.0 -50 -25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 5, Dynamic Parameters vs Junction Temperature tfr, FORWARD RECOVERY TIME (nano-SECONDS) trr, REVERSE RECOVERY TIME (nano-SECONDS) TJ = 100°C VR = 350V 160 60A 120 15.0 1200 200 30A 15A 80 40 0 0 200 400 600 800 1000 diF /dt, CURRENT SLEW RATE (AMPERES/µSEC) Figure 6, Reverse Recovery Time vs Current Slew Rate 1000 TJ = 100°C VR = 350V IF = 30A 800 12.5 10.0 Vfr 600 7.5 400 5.0 200 2.5 tfr Vfr, FORWARD RECOVERY VOLTAGE (VOLTS) IF, FORWARD CURRENT (AMPERES) 100 0 0 0 200 400 600 800 1000 diF /dt, CURRENT SLEW RATE (AMPERES/µSEC) Figure 7, Forward Recovery Voltage/Time vs Current Slew Rate 800 100 50 30 0.01 0.05 0.1 Figure 8, Junction Capacitance vs Reverse Voltage 0.5 1 5 VR, REVERSE VOLTAGE (VOLTS) 10 50 100 200 053-6016 Rev - CJ, JUNCTION CAPACITANCE (pico-FARADS) 500 APT30D60BCT Vr D.U.T. trr/Qrr Waveform 30µH PEARSON 411 CURRENT TRANSFORMER +15v diF /dt Adjust 0v -15v Figure 9, Diode Reverse Recovery Test Circuit and Waveforms 1 IF - Forward Conduction Current 2 diF /dt - Current Slew Rate, Rate of Forward Current Change Through Zero Crossing. 3 IRRM - Peak Reverse Recovery Current. 4 trr - Reverse Recovery Time Measured from Point of IF 1 4 6 Zero 5 3 Current Falling Through Zero to a Tangent Line { 6 diM/dt} Extrapolated Through Zero Defined by 0.75 and 0.50 IRRM. 0.5 IRRM 0.75 IRRM 2 5 Qrr - Area Under the Curve Defined by IRRM and trr. 6 diM/dt - Maximum Rate of Current Change During the Trailing Portion of trr. Qrr = 1/2 (trr . IRRM) Figure 10, Diode Reverse Recovery Waveform and Definitions TO-247AD Package Outline 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 15.49 (.610) 16.26 (.640) 6.15 (.242) BSC 5.38 (.212) 6.20 (.244) Common Cathode 20.80 (.819) 21.46 (.845) 3.55 (.140) 3.81 (.150) 4.50 (.177) Max. 0.40 (.016) 0.79 (.031) 2.87 (.113) 3.12 (.123) 1.65 (.065) 2.13 (.084) 19.81 (.780) 20.32 (.800) 1.01 (.040) 1.40 (.055) Anode 1 Common Cathode Anode 2 053-6016 Rev - 2.21 (.087) 2.59 (.102) 5.45 (.215) BSC 2-Plcs. Dimensions in Millimeters and (Inches) APT Reserves the right to change, without notice, the specifications and information contained herein.