– N EW P RODUCT I NTRODUCTION – CLC425A/BPA Rochester Electronics has re-introduced and continues to manufacture critically needed semiconductors with the full authorization of the original manufacturer and an attention to quality that meets or exceeds the original component. Original Manufacturer: Re-introduced by Rochester Electronics on July, 25, 2012 CLC425A/BPA Original Part Number: CLC425A Description: Operational Amplifier Package: 8 pin DIP Manufacturing Flow: QML Manufacturing Type: made from original National Semi wafers Related Devices [ by temperature / package type / speed / application ] CLC425A8B CLC425A8L2 CLC425AIB CLC425AJ CLC425AJ-MLS CLC425AJE-TR13 CLC425AJM5 CLC425AJM5X CLC425AJP ULTRA LOW NOISE OP AMP with a wide variety of applications The CLC425 combines a wide bandwidth (1.9GBW) with a very low input noise and low dc errors to provide a very precise, wide dynamic range op amp offering closed-loop gains of ≥10. The CLC425’s combination of ultra low noise, wide gain bandwidth, high slew rate and low dc errors will enable applica- tions in areas such as medical diagnostic ultrasound, magnetic tape & disk storage, communications and opto-electronics to achieve maximum high frequency signal-to-noise ratios. Worldwide Corporate Headquarters 16 Malcolm Hoyt Drive . Newburyport, MA 01950 phone 978.462.9332 . email [email protected] . web www.rocelec.com © Rochester Electronics, LLC - All Rights Reserved - 08012012