FE5B SINTERED GLASS JUNCTION SUPERFAST AVALANCHE RECTIFIER VOLTAGE： ：100V CURRENT: 5.0A FEATURE G-4 High temperature metallurgically bonded construction Glass passivated cavity-free Super fast recovery time for high efficiency Low forward voltage, high current capability Low leakage current High surge current capability MECHANICAL DATA Case: G-4 sintered glass case Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Polarity: color band denotes cathode end Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL FE5B units Maximum Recurrent Peak Reverse Voltage VRRM 100 V Maximum RMS Voltage VRMS 70 V Maximum DC blocking Voltage VDC 100 V Maximum Average Forward Rectified Current 3/8”lead length at Tl=55℃ Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load Maximum Forward Voltage at rated Forward Current and 25℃ Maximum DC Reverse Current at Ta= 25℃ rated DC blocking voltage Ta= 100℃ IFAV 5.0 A IFSM 135 A VF 0.95 V IR 5.0 50.0 µA Maximum Reverse Recovery Time (Note 1) Trr 35 nS Typical Junction Capacitance (Note 2) Cj 100.0 pF Typical Thermal Resistance (Note 3) (Note4) Rth(ja) Rth(jl) 55.0 20.0 ℃ /W Tstg, Tj -65 to +175 ℃ Storage and Operating Junction Temperature Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient at 0.375”(9.5mm) lead length and mounted on P.C. B. 4. Thermal Resistance from Junction to Leadt at 0.375”(9.5mm) lead length with both leads attached to heatsinks Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES FE5B Rev.A1 www.gulfsemi.com