DEVICES SRC DIP 14 SERIES REED RELAYS MSS2 ■ MSS7 ■ PRMA ■ DSS7 ■ PRME ■ MVS2 ■ MVS7 DESCRIPTION SRC Device’s epoxy molded DIP 14 Series offers a variety of contacts and schematics to meet the needs of a wide range of applications. It features the MVS2/MVS7 models designed for high reliability. The MSS2/7 DIPs are 1-Form-A relays equipped with the MYAD® all-position mounting switch. With switching up to 50 Watts and a 4000V isolation option, the DIP 14 Series is a relay package that allows for automatic insertion directly on PCBs as well as insertion into standard 14 Pin DIP sockets. RATINGS (@ 25˚ C) FEATURES ■ ■ ■ ■ ■ ■ ■ ■ ■ All position mercury contacts on some models Stable contact resistance over life 4000 Vac input-output isolation Bounce free operation High insulation resistance Switching speed of 300Hz Long life > 1 billion operations Epoxy molded for automatic board processing FCC68 compatible (MSS2 & MSS7) APPLICATIONS ■ ■ ■ ■ ■ ■ ■ ■ Automatic test equipment Process control Industrial Telecom Datacom High-end security systems Signaling Metering Parameter Min Typ Max Unit Switching Voltage PRMA/PRME/DSS7 PRMA Form C MSS2/MSS7 MVS2/MVS7 200 100 500 1000 Volts Volts Volts Volts Switching Current PRMA/PRME/DSS7 PRMA Form C MSS2/MSS7/MVS2/MVS7 0.5 0.25 2 Amps Amps Amps Carry Current PRMA/PRME/DSS7 PRMA Form C MSS2/MSS7 MVS2/MVS7 2 0.4 3 3 Amps Amps Amps Amps Switching Frequency PRMA/PRME/DSS7 PRMA Form C MSS2/MSS7/MVS2/MVS7 500 50 200 Hz Hz Hz Contact Resistance PRMA/PRME/DSS7 PRMA Form C MSS2/MSS7/MVS2/MVS7 150 200 100 mΩ mΩ mΩ APPROVALS ■ UL approval (DSS7 & PRMA) ■ EN 60950 certified (MVS7, DSS7 & MSS7) ■ CSA approval (PRMA) (See detailed specifications for more information.) www.srcdevices.com 1 DIP 14 SERIES REED RELAYS MSS2 ■ MSS7 ■ PRMA ■ DSS7 ■ PRME ■ MVS2 ■ MVS7 DEVICES SRC SPECIFICATIONS All parameters are at 25°C unless otherwise stated. Operate voltage, release voltage, and coil resistance will change approximately 0.4%/°C as ambient temperature varies. PARAMETER CONDITIONS MSS2 MSS7 Molded 8 Pin All position Wetted contacts Molded 4 Pin All position Wetted contacts SYMBOL MIN TYP MAX MIN TYP MAX UNITS VL IL IC - - 500 2 3 - - 500 2 3 Volts Amps Amps - 200 50 - - 200 50 - Watts x106 Ops - 40 N/A Hg 16 100 - - 65 N/A Hg 16 100 - mΩ mΩ mgrams 108 1010 - 108 1010 - Ω - 2 4 1.75 2000 5600 - 1.2 3 1.2 2 4 1.75 pF pF VDC/Peak AC VDC/Peak AC ms Contact Ratings Switching Voltage Switching Current Carry Current Max DC/PeakAC Resistive Max DC/PeakAC Resistive Max DC/PeakAC Resistive Contact Rating Life Expectancy Max DC/PeakAC Resistive Signal Level 1.0 V 10mA Related Loads(1) 50mV, 10mA .5V, 50mA at 100Hz, 1.5 msec Static Contact Resistance Dynamic Contact Resistance Contact Material Hg Content CR DCR Relay Specifications Insulation Resistance Capacitance Dielectric Strength Operate Time, including bounce Release Time Between all isolated pins at 100V, 25°C, 40% RH Across Open Contacts Open Contact to Coil Between Contacts Contacts to Coil At Nominal Coil Voltage 10Hz Square Wave Zener-Diode Suppression IR I/O TOP 1400 1400 - 1.5 3 1.2 TREL - 1 1.50 - 1 1.50 ms TA TO -40 -38 - +105 +75 -40 -38 - +105 +75 °C °C G - 260 - 10 - 260 - 10 °C Gs S - - 30 - - 30 Gs - 2.3 - - 2.3 - grams Environmental Ratings Storage Temperature Operating Temperature Soldering Temperature Vibration Resistance (Survival) Shock Resistance (Survival) Weight Applied to pins, 5 sec. max. 10Hz - 500Hz 1 11±1ms, /2 Sine Wave (1) Refer to life graphs USA 1-866-SRC-8668 Europe 32-89-328850 www.srcdevices.com Far East 886-2-2698-8422 2 SRC DEVICES DIP 14 SERIES REED RELAYS MSS2 ■ MSS7 ■ PRMA ■ DSS7 ■ PRME ■ MVS2 ■ MVS7 SPECIFICATIONS PARAMETER CONDITIONS PRMA PRMA All parameters are at 25°C unless otherwise stated. Operate voltage, release voltage, and coil resistance will change approximately 0.4%/°C as ambient temperature varies. SYMBOL Molded 8 Pin Form-C Dry Reed MIN TYP MAX Molded 8 Pin Form-A&B Dry Reed MIN TYP MAX UNITS 100 0.25 0.4 - - 200 0.5 2 Volts Amps Amps Contact Ratings Switching Voltage Switching Current Carry Current Max DC/PeakAC Resistive Max DC/PeakAC Resistive Max DC/PeakAC Resistive Contact Rating Life Expectancy Max DC/PeakAC Resistive Signal Level 1.0V 10mA Related Loads(1) 50mV, 10mA .5V, 50mA at 100Hz, 1.5 msec Static Contact Resistance Dynamic Contact Resistance Contact Material VL IL IC - 20 3 - 300 500 10 - Watts x106 Ops CR DCR - N/A Rh 200 - - N/A Ru 150 - mΩ mΩ IR 109 1010 - 1010 1012 - Ω - 3 3 2 250 1400 - 0.7 1.5 .25 1 2 0.5 pF pF VDC/Peak AC VDC/Peak AC ms Relay Specifications Insulation Resistance Capacitance Dielectric Strength Operate Time, including bounce Release Time Between all isolated pins at 100V, 25°C, 40% RH Across Open Contacts Open Contact to Coil Between Contacts Contacts to Coil At Nominal Coil Voltage 10Hz Square Wave Zener-Diode Suppression I/O TOP 250 1400 - 2.5 3 1.5 TREL - 1.5 3 - .25 0.5 ms TA TO -40 -40 - +105 +80 -40 -40 - +105 +80 °C °C G - 260 - 10 - - 260 20 °C Gs S - - 50 - - 100 Gs - 1.5 - - 1.5 - grams Environmental Ratings Storage Temperature Operating Temperature Soldering Temperature Vibration Resistance(2) (Survival) Shock Resistance (Survival) Weight Applied to pins, 5 sec. max. 10 Hz - 500 Hz for PRMA Form A&B 5Hz - 500Hz for PRMA Form C 1 11±1ms, /2 Sine Wave (1) Refer to life graphs (2) Use caution not to exceed vibration resistance limits while ultrasonically cleaning relays with DYAD switches. Contact SRC Devices Engineering for more details/recommendations. USA 1-866-SRC-8668 Europe 32-89-328850 www.srcdevices.com Far East 886-2-2698-8422 3 DIP 14 SERIES REED RELAYS MSS2 ■ MSS7 ■ PRMA ■ DSS7 ■ PRME ■ MVS2 ■ MVS7 DEVICES SRC SPECIFICATIONS All parameters are at 25°C unless otherwise stated. Operate voltage, release voltage, and coil resistance will change approximately 0.4%/°C as ambient temperature varies. PARAMETER CONDITIONS DSS7 PRME Molded 4 Pin Dry Reed Molded 8 Pin Low profile Dry Reed MIN TYP MAX SYMBOL MIN TYP MAX VL IL IC - - 200 0.5 2 - 300 500 10 - 300 CR DCR - N/A Ru 150 - IR 1010 1012 - UNITS Contact Ratings Switching Voltage Switching Current Carry Current Max DC/PeakAC Resistive Max DC/PeakAC Resistive Max DC/PeakAC Resistive Contact Rating Life Expectancy Max DC/PeakAC Resistive Signal Level 1.0 V 10mA Related Loads(1) 50mV, 10mA .5V, 50mA at 100Hz, 1.5 msec Static Contact Resistance Dynamic Contact Resistance Contact Material 200 0.5 2 Volts Amps Amps 500 10 - Watts x106 Ops - N/A Ru 150 - mΩ mΩ - 1010 1012 - Ω 0.7 1.5 - 1 2 - - 0.8 1.5 - 1 2 - 0.25 1 pF pF VDC/Peak AC VDC/Peak AC ms Relay Specifications Insulation Resistance Capacitance Dielectric Strength Operate Time, including bounce Release Time Between all isolated pins at 100V, 25°C, 40% RH Across Open Contacts Open Contact to Coil Between Contacts Contacts to Coil At Nominal Coil Voltage 10Hz Square Wave Zener-Diode Suppression I/O TOP 250 5600 - 0.25 0.5 250 1000 - TREL - 0.25 0.5 - 0.25 0.5 ms TA TO -40 -40 - +105 +80 -40 -40 - +105 +80 °C °C G - - 260 20 - - 260 20 °C Gs S - - 100 - - 100 Gs - 1.5 - - 1.5 - grams Environmental Ratings Storage Temperature Operating Temperature Soldering Temperature Vibration Resistance(2) (Survival) Shock Resistance (Survival) Weight Applied to pins, 5 sec. max. 5Hz - 500Hz 1 11±1ms, /2 Sine Wave (1) Refer to life graphs (2) Use caution not to exceed vibration resistance limits while ultrasonically cleaning relays with DYAD switches. Contact SRC Devices Engineering for more details/recommendations. USA 1-866-SRC-8668 Europe 32-89-328850 www.srcdevices.com Far East 886-2-2698-8422 4 SRC DEVICES DIP 14 SERIES REED RELAYS MSS2 ■ MSS7 ■ PRMA ■ DSS7 ■ PRME ■ MVS2 ■ MVS7 SPECIFICATIONS All parameters are at 25°C unless otherwise stated. Operate voltage, release voltage, and coil resistance will change approximately 0.4%/°C as ambient temperature varies. PARAMETER CONDITIONS SYMBOL MVS2 MVS7 8 Pin DIP Wetted Contacts(3) MIN TYP MAX 4 Pin DIP Wetted Contacts(3) MIN TYP MAX UNITS Contact Ratings Switching Voltage Switching Current Carry Current Max DC/PeakAC Resistive Max DC/PeakAC Resistive Max DC/PeakAC Resistive Contact Rating Life Expectancy Max DC/PeakAC Resistive Signal Level 1.0 V 10mA 50V, 1A 500V, 100mA Related Loads(2) 50mV, 10mA Static Contact Resistance Contact Material Hg Content - - 1000(1) 2 3 - - 1000(1) 2 3 Volts Amps Amps 1000 - 2 50 50 - 1000 - 2 50 50 - Watts x106 Ops x106 Ops x106 Ops - Hg 40 100 - - Hg 40 100 - mΩ mgrams IR 1010 1012 - 1010 1012 - Ω I/O TOP 1400 1400 - 0.7 1.2 3.2 1.5 2.5 2000 5600 - 0.7 1.5 2.5 1.5 2.5 pF pF pF VDC/Peak AC VDC/Peak AC ms TREL - 1 2.5 - 1 2.5 ms TA TO -40 - +105 +260 -40 - +105 +260 °C °C G -38 - - +85 10 -38 - - +85 10 °C Gs S - - 30 - - 30 Gs - 2.1 - - 2.1 - grams VL IL IC CR Relay Specifications Insulation Resistance Capacitance Dielectric Strength Operate Time Release Time Between all isolated pins at 100V, 25°C, 40% RH Across Open Contacts Upper Contact to Coil Closed Contact to Coil Open Contacts Contacts to Coil At Nominal Coil Voltage 10Hz Square Wave Zener-Diode Suppression Environmental Ratings Storage Temperature Operating Temperature Soldering Temperature Vibration Resistance(2) (Survival) Shock Resistance (Survival) Weight Applied to pins, 5 sec. max. 10Hz - 500Hz 1 11±1ms, /2 Sine Wave (1) Current limited up to 5mA, minimum 20 million operations; for further information, consult factory (2) Refer to life graphs (3) Relay contains mercury welted contacts and must be mounted vertically. Pin 1 is up. USA 1-866-SRC-8668 Europe 32-89-328850 www.srcdevices.com Far East 886-2-2698-8422 5 DIP 14 SERIES REED RELAYS MSS2 ■ MSS7 ■ PRMA ■ DSS7 ■ PRME ■ MVS2 ■ MVS7 DEVICES SRC COIL SPECIFICATIONS Contact Form Coil Voltage Coil Resistance Operate Voltage Volts Ω Volts Units Conditions Release Voltage Nominal Input Power Volt mW +/- 10% (25°C) Must operate by (25°C)Must release by (25°C) Part # Min Typ Max Min Typ Max Min Typ Max Min Typ Max Min Typ MSS2 1A05 MSS2 1A12 MSS2 1A24 1-Form-A 1-Form-A 1-Form-A 5 12 24 11 21 44 126 140 154 450 500 550 1935 2150 2365 3.75 9 18 0.5 1 2 179 288 268 MSS7 1A05 MSS7 1A12 MSS7 1A24 1-Form-A 1-Form-A 1-Form-A 5 12 24 11 21 43 126 140 154 450 500 550 1935 2150 2365 3.75 9 18 0.5 1 2 179 288 268 PRMA 1A05 PRMA 1A12 PRMA 1A24 1-Form-A 1-Form-A 1-Form-A 5 12 24 21 30 44 450 500 550 900 1000 1100 1935 2150 2365 3.75 9 18 0.8 1 2 50 144 268 PRMA 1B05 PRMA 1B12 PRMA 1B24 1-Form-B 1-Form-B 1-Form-B 5 12 24 6 14.5 29 450 500 550 900 1000 1100 1935 2150 2365 3.75 9 18 0.8 1 2 50 144 268 PRMA 1C05 PRMA 1C12 PRMA 1C24 1-Form-C 1-Form-C 1-Form-C 5 12 24 12 18 32 180 200 220 450 500 550 1935 2150 2365 3.75 9 18 0.8 1 2 125 288 268 PRMA 2A05 PRMA 2A12 PRMA 2A24 2-Form-A 2-Form-A 2-Form-A 5 12 24 11 21 44 126 140 154 450 500 550 1935 2150 2365 3.75 9 18 0.8 1 2 179 288 268 PRMA 10037 PRMA 10038 PRMA 10039 1-Form-A 1-Form-A 1-Form-A 5 12 24 15 19 32 342 380 418 477 530 583 1800 2000 2200 3.75 9 18 0.8 1 2 66 272 288 DSS7 1A05 DSS7 1A12 DSS7 1A24 1-Form-A 1-Form-A 1-Form-A 5 12 24 21 30 44 450 500 550 900 1000 1100 1935 2150 2365 3.75 9 18 0.8 1 2 50 144 268 PRME 25005 PRME 15005 PRME 15002 PRME 15003 1-Form-A 1-Form-A 1-Form-A 1-Form-A 5 5 12 24 19 15 19 32 450 500 550 342 380 418 477 530 583 1800 2000 2200 3.8 3.5 8 16 0.8 1 1 2 50 66 272 288 MVS2 1A05(A,B) MVS2 1A12(A,B) MVS2 1A24(A,B) 1-Form-A 1-Form-A 1-Form-A 5 12 24 7 15 30 94.5 105 116 450 500 550 1935 2150 2365 3.75 9 18 0.5 1 2 238 288 268 MVS7 1A05(S) MVS7 1A12(S) MVS7 1A24(S) 1-Form-A 1-Form-A 1-Form-A 5 12 24 7 15 30 94.5 105 116 450 500 550 1935 2150 2365 3.75 9 18 0.5 1 2 238 288 268 USA 1-866-SRC-8668 Europe 32-89-328850 www.srcdevices.com Max Far East 886-2-2698-8422 6 SRC DEVICES DIP 14 SERIES REED RELAYS MSS2 ■ MSS7 ■ PRMA ■ DSS7 ■ PRME ■ MVS2 ■ MVS7 PERFORMANCE GRAPHS PRMA Life/Contact Load Characteristics (Confidence Level 99%) PRMA Allowable Operating Range 100 25 Duty Cycle (%) Life: >10x106 Operations Voltage (Vdc) 20 15 10 75 50 25 5 0 200 0 0 100 0 200 300 400 400 600 800 1000 Operating Frequency Contact Load (mA) PRMA Operate Time vs Nominal Voltage PRMA Contact Noise Envelope (Bandwidth 10KHz) 500 1A7A Contact Noise (µV) Operate Time (µs) 60 400 300 200 100 40 10K 547 20 Tektronix 0 -20 -40 0 0.5 0 1 1.5 2 2.5 -60 0 Multiple of Nominal Voltage 1 2 3 4 5 6 Time After Coil Energization (ms) MVS7/MSS7 Relay Internal Temperature Rise vs. Power 3.3 3.0 2.7 2.4 2.1 1.8 1.5 1.2 0.9 0.6 0.3 0 Temperature Rise (¡C) (Typ.) Operate Time (ms) MSS2/MSS7 Operate Time vs Nominal Voltage (with Diode Suppression) A B 50 40 30 20 10 0 0.2 0 0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 0.4 2.4 0.6 0.8 Power (W) Multiple of Nominal Voltage A = +3δ B = -3δ MSS2/MSS7 Magnetic Interference % Change Release Time (ms) MSS2/MSS7 Timing (with Diode Suppression) 3.3 3.0 2.7 2.4 2.1 1.8 1.5 1.2 0.9 0.6 0.3 0 A B 0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 Multiple of Nominal Voltage A = +3δ B = -3δ USA 1-866-SRC-8668 Europe 32-89-328850 www.srcdevices.com 25 20 15 10 5 0 -5 -10 -15 -20 0 0.2 0.4 0.6 0.8 X = Distance (in.) between centers of adjacent relays. (For distance between relay bodies, subtract .400) Far East 886-2-2698-8422 7 DIP 14 SERIES REED RELAYS MSS2 ■ MSS7 ■ PRMA ■ DSS7 DIMENSIONS mm (inches) ■ PRME ■ MVS2 ■ MVS7 MECHANICAL DIMENSIONS PRMA 1A PRMA 0.49 (0.019) 19.60 MAX. (0.772) 10.16 (0.400) 6.90 MAX. (0.272) DEVICES SRC 1 2 14 13 1 2 14 13 1 2 6 7 9 8 6 7 8 6 7 15.24 (0.600) 3.20 – 0.25 (0.125 – 0.009) 6.70 MAX. (0.264) PRMA 1B Top View Top View 14 13 1 2 8 6 7 — Top View Options: Diode - pin #2 is positive Electrostatic shield - pin 9 7.33 MAX. (0.289) + PRMA 1C 14 8 Top View Options: Diode - pin #2 is positive Electrostatic shield - pin 9 Options: Diode - pin #2 is positive Electrostatic shield - pin 9 7.62 (0.300) PRMA 10037/10038/10039 PRMA 2A 0.28 (0.011) 8.90 MAX. (0.350) 1 2 14 13 MVS2/MSS2 1 2 14 13 1 2 6 7 9 8 6 7 14 13 UP * 6 7 8 Top View Top View Options: Diode - pin #2 is positive Electrostatic shield - pin 9 8 Top View Options: Diode - pin #2 is positive Electrostatic shield - pin 9 * MVS2 only must be mounted vertically with pin #1 UP. PRME PRME 3.20 – 0.25 (0.125 – 0.009) 0.46 (0.018) 1 2 14 13 6 7 9 8 1 14 13 10.16 15.24 (0.400) (0.600) 19.60 (0.772) 5.00 MAX. (0.197) 6.40 (0.252) 6 7 Top View 8 Top View 5.30 – 0.10 (0.208 – 0.003) Options: Diode - pin #13 is positive Electrostatic shield - pin 9 7.62 (0.300) 0.28 (0.011) 8.90 MAX. (0.350) DSS7 DSS7 0.49 (0.019) 1 19.60 MAX. (0.772) 10.16 (0.400) 13 1 8 6 13 15.24 (0.600) 6 6.90 MAX. (0.272) 6.70 MAX. (0.264) 3.20 – .25 (0.125 – 0.009) 8 Top View Top View 7.33 MAX. (0.289) 7.62 (0.300) MSV must be mounted vertically. Pin #1 is up. 8.90 MAX. (0.350) 0.28 (0.011) USA 1-866-SRC-8668 Europe 32-89-328850 www.srcdevices.com Far East 886-2-2698-8422 8 SRC DEVICES DIP 14 SERIES REED RELAYS MSS2 ■ MSS7 ■ PRMA ■ DSS7 ■ PRME ■ MVS2 ■ MVS7 ORDERING INFORMATION A complete part number is represented by the digits below. For example, the PRMA1A05 is a model 2 PRMA relay with a 1-Form A contact form, a nominal voltage of 5V and no extra options. XXXX XX XX X Series Options PRMA DSS7 A = ES option B = Diode option C = Shield & diode option S = Modified pinout (Coil at 2 & 6, contact at 8 & 14, DSS7 only) Nominal Coil Voltage Contact Form 05 = 5V 12 = 12V 24 = 24V 1A = 1-Form-A 15 = 1-Form-A (PRME) 2A = 2-Form-A 1B = 1-Form-B 1C = 1-Form-C Ordering Information Special Schematics PRME 25005 PRME 15005 PRME 15002 PRME 15003 PRMA 10037 PRMA 10038 PRMA 10039 These represent full part numbers. USA 1-866-SRC-8668 Europe 32-89-328850 www.srcdevices.com Far East 886-2-2698-8422 9