Kingbright AA3022YC 3.0x2.2mm single color surface mount led lamp Datasheet

3.0x2.2mm SINGLE COLOR SURFACE MOUNT
LED LAMP
Part Number: AA3022YC-4.5SF
Features
Yellow
Description
3.0mm x 2.2mm SMT LED,1.5mm THICKNESS.
The Yellow source color devices are made with Gallium
ULTRA-COMPACT TYPE ASSURES SPACE SAVING.
Arsenide Phosphide on Gallium Phosphide Yellow Light
HIGH EFFICIENCY & LOW POWER CONSUMPTION.
Emitting Diode.
PACKAGE: 1500PCS / REEL.
MOISTURE SENSITIVITY LEVEL : LEVEL 4.
RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
5. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAD1226
REV NO: V.2
DATE: MAY/08/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 1 OF 5
ERP: 1201000237
Selection Guide
Part No.
Dice
AA3022YC-4.5SF
Lens Type
Yellow (GaAsP/GaP)
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Min.
Typ.
2;1/2
4
10
90°
WATER CLEAR
Notes:
1. >1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
Dpeak
Peak Wavelength
Yellow
DD [1]
Dominant Wavelength
ID1/2
Max.
Units
Test Conditions
590
nm
IF=20mA
Yellow
588
nm
IF=20mA
Spectral Line Half-width
Yellow
35
nm
IF=20mA
C
Capacitance
Yellow
20
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Yellow
2.1
2.5
V
IF=20mA
IR
Reverse Current
Yellow
10
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Yellow
Units
Power dissipation
75
mW
DC Forward Current
30
mA
Peak Forward Current [1]
140
mA
5
V
Reverse Voltage
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAD1226
REV NO: V.2
DATE: MAY/08/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 2 OF 5
ERP: 1201000237
Yellow
AA3022YC-4.5SF
SPEC NO: DSAD1226
REV NO: V.2
DATE: MAY/08/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 3 OF 5
ERP: 1201000237
AA3022YC-4.5SF
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAD1226
REV NO: V.2
DATE: MAY/08/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 4 OF 5
ERP: 1201000237
PACKING & LABEL SPECIFICATIONS
AA3022YC-4.5SF
SPEC NO: DSAD1226
REV NO: V.2
DATE: MAY/08/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 5 OF 5
ERP: 1201000237
Similar pages