EPCOS B72214T2211K101 Siov metal oxide varistor Datasheet

SIOV metal oxide varistors
Housed (ThermoFuse) varistors, AdvanceD series
Series/Type:
ETFV14
Date:
December 2007
Data Sheet
 EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
Housed varistors
ThermoFuse varistors, ETFV14 series
Construction
■
■
■
■
Round varistor element, leaded
Coating: epoxy resin, flame-retardant to UL 94 V-0
Terminals: tinned copper wire, metal compound wire
Housing: thermoplastic, flame-retardant to UL 94 V-0
Features
■ Wide operating voltage range 130 … 420 VRMS
■ Self-protected under abnormal overvoltage conditions
■ High-energy AdvanceD series E2
Approvals
■ UL
Applications
■ Air conditioner, refrigerator, TV, etc.
■ Power meter, inverter, telecom equipment, etc.
■ Transient voltage surge suppressors (TVSS)
Delivery mode
■ Bulk (standard)
Typical applications
Line
Line fuse
ThermoFuse υ
D
To protected device
LED
R
Neutral
VAR0602-S-E
General technical data
Climatic category
Operating temperature
Storage temperature
Electric strength
Response time
to IEC 60068-1
to CECC 42 000
to CECC 42 000
Please read Cautions and warnings and
Important notes at the end of this document.
2
11/07
40/85/56
– 40 … + 85
– 40 … +125
≥2.5
<25
°C
°C
kVRMS
ns
Housed varistors
ThermoFuse varistors, ETFV14 series
Maximum ratings (TA = 85 °C)
Ordering code
B72214T2131K101
B72214T2141K101
B72214T2151K101
B72214T2171K101
B72214T2211K101
B72214T2231K101
B72214T2251K101
B72214T2271K101
B72214T2301K101
B72214T2321K101
B72214T2351K101
B72214T2381K101
B72214T2421K101
Type
(untaped)
SIOVETFV14K130E2
ETFV14K140E2
ETFV14K150E2
ETFV14K175E2
ETFV14K210E2
ETFV14K230E2
ETFV14K250E2
ETFV14K275E2
ETFV14K300E2
ETFV14K320E2
ETFV14K350E2
ETFV14K385E2
ETFV14K420E2
VRMS
VDC
V
170
180
200
225
270
300
320
350
385
420
460
505
560
imax
(8/20 µs)
A
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
6000
Wmax
(2 ms)
J
50
55
60
70
80
90
100
110
125
136
136
136
136
V
130
140
150
175
210
230
250
275
300
320
350
385
420
Vv
(1 mA)
V
205
220
240
270
330
360
390
430
470
510
560
620
680
∆Vv
(1 mA)
%
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
vc, max
(ic)
V
340
360
395
455
545
595
650
710
775
840
910
1025
1120
ic
Pmax
W
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
Characteristics (TA = 25 °C)
Ordering code
B72214T2131K101
B72214T2141K101
B72214T2151K101
B72214T2171K101
B72214T2211K101
B72214T2231K101
B72214T2251K101
B72214T2271K101
B72214T2301K101
B72214T2321K101
B72214T2351K101
B72214T2381K101
B72214T2421K101
Type
(untaped)
SIOVETFV14K130E2
ETFV14K140E2
ETFV14K150E2
ETFV14K175E2
ETFV14K210E2
ETFV14K230E2
ETFV14K250E2
ETFV14K275E2
ETFV14K300E2
ETFV14K320E2
ETFV14K350E2
ETFV14K385E2
ETFV14K420E2
Please read Cautions and warnings and
Important notes at the end of this document.
3
11/07
A
50
50
50
50
50
50
50
50
50
50
50
50
50
Ctyp
(1 kHz)
pF
650
610
570
490
410
380
350
320
300
280
260
240
220
Housed varistors
ThermoFuse varistors, ETFV14 series
2±0.5
Weight
Nominal diameter VRMS
V
mm
14
130 … 420
5±0.5
1±0.5
1.4±0.5
Dimensional drawing
11.2 max.
22 max.
19.2 max.
3
1
5±0.5
2
5±0.5
7.5±0.5
ø0.8±0.05
VAR0587-A-E
Lead configuration
3
ThermoFuse
2
υ
Monitor lead
Metal oxide varistor
1
VAR0592-X-E
Please read Cautions and warnings and
Important notes at the end of this document.
4
11/07
Weight
g
4.3 … 5.3
Housed varistors
ThermoFuse varistors, ETFV14 series
Reliability data
Test
Test methods/conditions
Varistor voltage
The voltage between two terminals with To meet the specified value.
the specified measuring current applied
is called Vv (1 mADC @ 0.2 … 2 s).
The maximum voltage between two
To meet the specified value.
terminals with the specified standard
impulse current (8/20 µs) applied.
CECC 42 000, test C 2.1
|∆V/V (1 mA)| ≤10%
Clamping voltage
Surge current derating,
8/20 µs
Surge current derating,
2 ms
Abnormal overvoltage test
Requirement
100 surge currents (8/20 µs), unipolar, (measured in direction
interval 30 s, amplitude corresponding of surge current)
to derating curve for 100 impulses
No visible damage
at 20 µs
CECC 42 000, test C 2.1
|∆V/V (1 mA)| ≤10%
100 surge currents (2 ms), unipolar,
(measured in direction
interval 120 s, amplitude corresponding of surge current)
to derating curve for 100 impulses
No visible damage
at 2 ms
UL1449, limited current abnormal overvoltage test. Apply a high AC voltage
to ThermoFuse varistor, the amplitude
of overvoltage and current limit will be
adopted from UL1449 general instruction in section 37. The specimen will be
tested on a softwood surface covered
with a double layer of white tissue
paper. The specimen is to be loosely
draped with a double layer of cheesecloth. The cheesecloth shall cover
openings where flame, molten or other
particles may be expelled as a result of
the test. The test result will be visually
inspected.
Any of these phenomena
shall not be observed, or
this specimen will be
judged as failed part.
1. Emission of flame,
molten metal, glowing
or flaming particles
through any openings
(pre-existed or created
as a result of the test)
in the product.
2. Charring, glowing, or
flaming of the supporting
surface, tissue paper,
or cheesecloth.
3. Ignition of the enclosure.
4. Creation of any openings
in the enclosure that
result in accessibility of
live parts, when judged
in accordance with
accessibility of live parts,
UL1449 section 13.
Please read Cautions and warnings and
Important notes at the end of this document.
5
11/07
Housed varistors
ThermoFuse varistors, ETFV14 series
v/i characteristics
v = f (i) – for explanation of the characteristics refer
to “General technical information”, 1.6.3
2000
1000
800
600
for worst-case
varistor tolerances
VAR0627-U
5000
V
v
A = Leakage current
B = Protection level
A
420
385
350
320
300
275
250
230
B
420
385
350
320
300
275
250
230
210
400
200
100
80
60
50 _ 5
10
175
150
140
130
210
175
150
140
130
10
_4
10
_3
10
_2
10
_1
10 0
10 1
10 2
10 3
A 10 4
i
SIOV-ETFV14 … E2
Please read Cautions and warnings and
Important notes at the end of this document.
6
11/07
Housed varistors
ThermoFuse varistors, ETFV14 series
Derating curves
Maximum surge current imax = f (tr, pulse train)
For explanation of the derating curves refer to “General technical information”, section 1.8.1
i max
VAR0435-Z
10 4
A
10 3
1x
2
5
10
i max
tr
10
10 2
10 3
10 4
10 5
10 6
2
5
10 1
5
10 0 1
10
5
10 2
5
10 3
5
µs 10 4
tr
SIOV-ETFV14 … E2
Please read Cautions and warnings and
Important notes at the end of this document.
7
11/07
Housed varistors
ThermoFuse varistors, ETFV14 series
Cautions and warnings
General
1. EPCOS metal oxide varistors (SIOVs) are designed for specific applications and should not be
used for purposes not identified in our specifications, application notes and data books unless
otherwise agreed with EPCOS during the design-in-phase.
2. Ensure suitability of SIOVs through reliability testing during the design-in phase. SIOVs should
be evaluated taking into consideration worst-case conditions.
3. For applications of SIOVs in line-to-ground circuits based on various international and local
standards there are restrictions existing or additional safety measures required.
Storage
1. Store SIOVs only in original packaging. Do not open the package before storage.
2. Storage conditions in original packaging:
Storage temperature:
Relative humidity:
Dew precipitation:
–25 °C … +45 °C
<75% annual average,
<95% on maximum 30 days a year.
Is to be avoided.
3. Avoid contamination of an SIOV’s surface during storage, handling and processing.
4. Avoid storage of SIOVs in harmful environments that can affect the function during long-term
operation (examples given under operation precautions).
5. The SIOV type series should be soldered within the time specified:
SIOV-S, -Q, -LS
ETFV and SFS types
24 months
12 months.
Handling
1. SIOVs must not be dropped.
2. Components must not be touched with bare hands. Gloves are recommended.
3. Avoid contamination of the surface of SIOV electrodes during handling, be careful of the sharp
edge of SIOV electrodes.
Soldering (where applicable)
1. Use rosin-type flux or non-activated flux.
2. Insufficient preheating may cause ceramic cracks.
3. Rapid cooling by dipping in solvent is not recommended.
4. Complete removal of flux is recommended.
Please read Cautions and warnings and
Important notes at the end of this document.
8
11/07
Housed varistors
ThermoFuse varistors, ETFV14 series
Mounting
1. Potting, sealing or adhesive compounds can produce chemical reactions in the SIOV ceramic
that will degrade the component’s electrical characteristics.
2. Overloading SIOVs may result in ruptured packages and expulsion of hot materials. For this reason SIOVs should be physically shielded from adjacent components.
Operation
1. Use SIOVs only within the specified temperature operating range.
2. Use SIOVs only within the specified voltage and current ranges.
3. Environmental conditions must not harm SIOVs. Use SIOVs only in normal atmospheric conditions. Avoid use in the presence of deoxidizing gases (chlorine gas, hydrogen sulfide gas,
ammonia gas, sulfuric acid gas, etc), corrosive agents, humid or salty conditions. Avoid contact
with any liquids and solvents.
Please read Cautions and warnings and
Important notes at the end of this document.
9
11/07
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As
a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic components
or failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in which
the malfunction or failure of a passive electronic component could endanger human life or health
(e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of
suitable design of the customer application or other action taken by the customer (e.g.
installation of protective circuitry or redundancy) that no injury or damage is sustained by third
parties in the event of malfunction or failure of a passive electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the foregoing
for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, DSSP, MiniBlue, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD,
SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered
or pending in Europe and in other countries. Further information will be found on the Internet at
www.epcos.com/trademarks.
10
11/07
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
EPCOS:
B72214T2141K101 B72214T2211K101 B72214T2231K101 B72214T2251K101 B72214T2301K101
B72214T2351K101 B72214T2381K101 ETFV14K420E2 ETFV14K275E2 ETFV14K150E2 ETFV14K130E2
ETFV14K175E2 ETFV14K320E2
Similar pages