Lumileds LHUV-0405-0500 Superior flux density, efficiency and design freedom â in the industryâ s only micro-package uv led Datasheet

General Illumination
LUXEON Z UV
Superior flux density, efficiency and
design freedom — in the industry’s
only micro-package UV LED
At 1/5th the size of other ultraviolet and violet LEDs, LUXEON Z UV LEDs,
a SMT device, can be assembled in tight arrays with spacing of only 200
microns, which enables high power density (W/cm2) system for superior
efficiency and design freedom. The product is undomed for precise
optical control, and a portfolio covering ultraviolet and violet light. The
superior quality of light, volume of lumens, and real world efficacy enable
leading performance and efficient solution development in a wide variety
of indoor and outdoor lighting segments.
Features and BENEFITS
Primary Applications
Offering ultraviolet in 380-400nm and violet (400-430nm) for a range of options
Specialty Lighting
Small 2.2mm² SMT footprint enables highest W/cm2 systems, design flexibility
1A max drive current allows more flux per LED
Up to 45%+ efficiency reduces heat output
AlN package of as low as 3.5 K/W for better thermal management
RoHS
COMPLIANT
DS114 LUXEON Z UV Product Datasheet ©2015 Lumileds Holding B.V. All rights reserved.
Table of Contents
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Radiant Flux Characteristics, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Other Characteristics, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Reflow Soldering Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Typical Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Typical Radiation Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Flux and Wavelength Bin Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Emitter Pocket Tape Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Emitter Reel Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
DS114 LUXEON Z UV Product Datasheet 20150221 ©2015 Lumileds Holding B.V. All rights reserved.
i
General Information
Test Conditions
LUXEON Z UV emitters are specified and binned at 500mA, 20ms monopulse, and junction temperature of 25°C.
Product Nomenclature
The part number designation for LUXEON Z UV is as follows:
L H UV – a B B B – c D D D
Where:
a — open slot to accommodate additional requirements per product and part number. a is 0 by default
BBB — designates beginning of 5nm wavelength bin (for example, 395 for 395-400nm)
c — open slot to accommodate additional requirements per product and part number. c is 0 by default
DDD — designates minimum radiometric power in mW (for example, 500 for 500mW)
Safety
WARNING: LUXEON Z UV products emit ultraviolet light. Do not look at operating LEDs. Eye injury may result. Use
necessary skin and eye protection. Assume IEC62471 Risk Group 3.
DS114 LUXEON Z UV Product Datasheet 20150221 ©2015 Lumileds Holding B.V. All rights reserved.
2
Radiant Flux Characteristics, TJ = 25°C
Table 1.
Wavelength Bin [1]
Part Number
Typ Radiometric Power [2], mW
380-385nm
LHUV-0380-0150
LHUV-0380-0200
LHUV-0380-0250
LHUV-0380-0300
500mA
175
225
275
325
385-390nm
LHUV-0385-0200
LHUV-0385-0250
LHUV-0385-0300
LHUV-0385-0350
225
275
325
375
470
570
675
780
15
18
22
25
390-395nm
LHUV-0390-0300
LHUV-0390-0350
LHUV-0390-0400
LHUV-0390-0450
330
375
425
470
695
790
900
1000
22
25
28
32
395-400nm
LHUV-0395-0350
LHUV-0395-0400
LHUV-0395-0450
LHUV-0395-0500
375
425
475
525
765
870
970
1075
25
28
31
35
400-405nm
LHUV-0400-0400
LHUV-0400-0450
LHUV-0400-0500
435
475
525
875
960
1055
28
31
34
405-410nm
LHUV-0405-0500
LHUV-0405-0550
LHUV-0405-0600
LHUV-0405-0650
525
575
625
675
1005
1100
1195
1295
35
38
41
45
410-415nm
LHUV-0410-0500
LHUV-0410-0550
LHUV-0410-0600
LHUV-0410-0650
525
575
625
675
985
1080
1160
1255
35
38
41
45
415-420nm
LHUV-0415-0550
LHUV-0415-0600
LHUV-0415-0650
575
625
675
1070
1160
1250
39
42
46
LHUV-0420-0550
LHUV-0420-0600
LHUV-0420-0650
LHUV-0425-0550
LHUV-0425-0600
LHUV-0425-0650
575
625
675
575
625
675
1060
1150
1245
1070
1165
1260
39
42
46
39
42
46
420-425nm
425-430nm
1000mA
370
475
580
685
Max Wall-Plug
Efficiency, %
12
15
18
21
Notes for Table 1:
1. Lumileds maintains a tolerance of ±2nm for peak wavelength measurements.
2. Lumileds maintains a tolerance of ±10% for radiometric power measurements.
DS114 LUXEON Z UV Product Datasheet 20150221 ©2015 Lumileds Holding B.V. All rights reserved.
3
Other Characteristics, TJ=25°C, Test Current = 500mA
Table 2.
Forward Voltage, V
Wavelength Bin [1]
Part Number
380-385nm
Typical
Spectral
Half-width, nm [2]
Dλ1/2
Typical
Viewing Angle,
degrees [3]
2u1/2
Thermal
Resistance Rth, [4]
°C/W
Minimum
Typical
Maximum
LHUV-0380
2.5
3.2
3.5
9
125
6
385-390nm
LHUV-0385
2.5
3.1
3.5
10
125
6
390-395nm
LHUV-0390
2.5
3.1
3.5
10
125
5
395-400nm
LHUV-0395
2.5
3.1
3.5
11
125
4.5
400-405nm
LHUV-0400
2.5
3.1
3.5
11
125
4.5
405-410nm
LHUV-0405
2.5
3.0
3.5
12
125
4.5
410-415nm
LHUV-0410
2.5
3.0
3.5
13
125
4
415-420nm
LHUV-0415
2.5
3.0
3.5
14
125
3.5
420-425nm
LHUV-0420
2.5
3.0
3.5
14
125
3.5
425-430nm
LHUV-0425
2.5
3.0
3.5
14
125
3.5
Notes for Table 2:
1. Lumileds maintains a tolerance of ± 2nm for peak wavelength measurements.
2. Spectral width at ½ of the peak intensity.
3. Viewing angle is the off axis angle from lamp centerline where the radiometric power intensity is ½ of the peak value.
4. Rth between junction and electrode pads.
Absolute Maximum Ratings
Table 3.
Condition
Absolute Maximum Rating
Forward Current (mA)
Junction Temperature
1000mA
135°C
[1]
ESD Sensitivity
Class 3B 8kV HBM JEDEC JS-001-2012
Operating Temperature
-40°C – 135°C
Storage Temperature
-40°C – 135°C
Reverse Voltage
LUXEON Z UV LEDs are not designed to be driven in reverse bias.
Notes for Table 3:
1. Proper current derating must be observed to maintain junction temperature below the maximum. Maximum junction temperature dependant on wavelegnth bin and drive
current. See AB114 for derating curve.
DS114 LUXEON Z UV Product Datasheet 20150221 ©2015 Lumileds Holding B.V. All rights reserved.
4
Mechanical Dimensions
DIE CENTER
0.68±0.15
0.65
0.40
0.25
0.62
0.95
1.50
1.70±0.15
CATHODE MARKER
DIE OUTLINE
0.95
1.30±0.15
SILICONE
OVERMOLD
0.44
CERAMIC
1.05
Figure 1. Package outline drawing.
Notes for Figure 1:
1. All dimensions are in millimeters.
2. To avoid damage, do not manually exert force to the top surface. See AB114 for handling precautions.
3. Drawings not to scale.
Solder Pad Design
Figure 2. Solder pad layout.
Notes for Figure 2:
1. All dimensions are in millimeters.
DS114 LUXEON Z UV Product Datasheet 20150221 ©2015 Lumileds Holding B.V. All rights reserved.
5
JEDEC Moisture Sensitivity
Table 4.
Level
1
Soak Requirements
Standard
Floor Life
Time
Conditions
Time
Conditions
unlimited
[ 30°C /
85% RH
168h
+5/-0
85°C / 85%
RH
Reflow Soldering Characteristics
Figure 3. Reflow soldering conditions.
Table 5.
Profile Feature
Lead Free Assembly
Average Ramp-Up Rate (Tsmax to Tp)
3°C / second max
Preheat Temperature Min (Tsmin)
150°C
Preheat Temperature Max (Tsmax)
200°C
Preheat Time (tsmin to tsmax)
60 - 180 seconds
Temperature TL (tL)
217°C
Time Maintained Above Temperature TL (tL)
60 - 150 seconds
Peak / Classification Temperature (TP)
260°C
Time Within 5°C of Actual Peak Temperature (tP)
20 - 40 seconds
Ramp-Down Rate
6°C / second max
Time 25°C to Peak Temperature
8 minutes max
Note for Table 5:
• All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body.
DS114 LUXEON Z UV Product Datasheet 20150221 ©2015 Lumileds Holding B.V. All rights reserved.
6
Typical Characteristic Curves
Figure 4. Typical relative radiant flux vs. forward current, Tj = 25°C.
Figure 5. Typical relative radiant flux vs. junction temperature, test current = 500mA.
DS114 LUXEON Z UV Product Datasheet 20150221 ©2015 Lumileds Holding B.V. All rights reserved.
7
Figure 6. Typical peak wavelength vs. forward current, Tj = 25°C.
Figure 7. Typical peak wavelength vs. junction temperature.
DS114 LUXEON Z UV Product Datasheet 20150221 ©2015 Lumileds Holding B.V. All rights reserved.
8
Figure 8. Typical forward current vs. forward voltage, Tj = 25°C.
Figure 9. Typical forward voltage vs. junction temperature.
DS114 LUXEON Z UV Product Datasheet 20150221 ©2015 Lumileds Holding B.V. All rights reserved.
9
Typical Radiation Patterns
Typical Spatial Radiation Pattern
Figure 10. Typical spatial radiation pattern.
Typical Polar Radiation Pattern
Figure 11. Typical polar radiation pattern.
DS114 LUXEON Z UV Product Datasheet 20150221 ©2015 Lumileds Holding B.V. All rights reserved.
10
Flux and Wavelength Bin Availability
Table 6 highlights standard radiometric power and wavelength bins in grey. Although several bins are outlined, product
availability in a particular bin varies by production run.
Table 6.
Minimum
Radiometric
Power
Wavelength Bin / Part Number
380-385nm
385-390nm
390-395nm
395-400nm
400-405nm
405-410nm
410-415nm
415-420nm
420-425nm
425-430nm
LHUV-0380
LHUV-0385
LHUV-0390
LHUV-0395
LHUV-0400
LHUV-0405
LHUV-0410
LHUV-0415
LHUV-0420
LHUV-0425
150mW
200mW
250mW
300mW
350mW
400mW
450mW
500mW
550mW
600mW
650mW
DS114 LUXEON Z UV Product Datasheet 20150221 ©2015 Lumileds Holding B.V. All rights reserved.
11
Emitter Pocket Tape Packaging
Figure 12. Emitter pocket tape packaging.
Figure 13. Orientation of LEDs inside carrier tape.
DS114 LUXEON Z UV Product Datasheet 20150221 ©2015 Lumileds Holding B.V. All rights reserved.
12
Emitter Reel Packaging
Figure 14. Emitter reel packaging.
DS114 LUXEON Z UV Product Datasheet 20150221 ©2015 Lumileds Holding B.V. All rights reserved.
13
About Lumileds
Lumileds is the light engine leader, delivering innovation, quality, and reliability.
For 100 years, Lumileds commitment to innovation has helped customers pioneer breakthrough products in the automotive,
consumer and illumination markets.
Lumileds is shaping the future of light with our LEDs and automotive lamps, and helping our customers illuminate how people
see the world around them.
To learn more about our portfolio of light engines visit www.lumileds.com.
©2015 Lumileds Holding B.V. All rights reserved.
LUXEON is a registered trademark of the Lumileds Holding B.V.
in the United States and other countries.
www.lumileds.com
DS114 LUXEON Z UV Product Datasheet 20150221
Lumileds Holding B.V. shall not be liable for any kind of loss of data or any other damages, direct,
indirect or consequential, resulting from the use of the provided information and data. Although
Lumileds Holding B.V. has attempted to provide the most accurate information and data, the
materials and services information and data are provided “as is” and Lumileds Holding B.V.
neither warranties, nor guarantees the contents and correctness of the provided information
and data. Lumileds Holding B.V. reserves the right to make changes without notice. You as user
agree to this disclaimer and user agreement with the download or use of the provided materials,
information and data.
Similar pages