3225H SMX‐4 (RF Clock Series) 3.2 x 2.5mm Crystal unit RoHS & REACH compliant Small outline SMD crystal Highly reliable seam seal 4 pad ceramic package Low aging crystal, specifically designed for RF application Parameters Specification Frequency range Frequency tolerance F_nom 10.00MHz ~ 64.00MHz F_tol ±10.0ppm Frequency stability over temperature range F_stb ±10.0ppm Frequency aging F_age ±1.0ppm Operable temperature range T_opr ‐40°C ~ +85°C Storage temperature T_stg ‐55°C ~ +125°C CL 8.0pF ~ 16.0pF Load capacitance 10.0 ~ 11.999MHz ESR 20.0 ~ 23.999MHz 70Ω max 24.0 ~ 64.000MHz 50Ω max Shunt capacitance C0 3.0pF max DL 200μW max MSL 1 (unlimited) IR 500MΩ min Moisture sensitivity level Insulation resistance Dimensions (mm) 100μW typical At 100V DC Reflow profile ⑨ ⑧ ⑦ ④ ⑥ 1.20 1.00 2.5±0.1 3 4 Temp.( °C) 300 0.70 0.90 3 1 Over ‐30°C ~ +85°C At 25°C, 1 Year 100Ω max Drive level 4 Fundamental 150Ω max 12.0 ~ 19.999MHz Equivalent series resistance Remarks 0.45 in 10 sec. max 1 2 30~40 sec. max 2 180 ± 10°C 200 3.2±0.1 260 ± 5°C 220 ± 10°C 250 0.80 1.40 0.75 max 0.40 1.20 150 90~120 sec. max 100 50 0 Time (sec.) Part number generation BNH ACT Series Code BNH 2700 ‐RF‐ KO Load RF capacitance series (CL ‐pF) Frequency (MHz) 8MHz = 0800 27MHz = 2700 Note: Use the first 4 characters of the frequency in Hz i.e. 27MHz =27000000Hz Part code =2700 If the frequency is 100MHz or higher than the first 5 characters are used ‐RF‐ 8 = GO 9 = JO 10 = KO 11 = MO 12 = OO 14 = PO 16 = RO M E F 1 Operable Temperature Range (°C) Frequency Tolerance (±ppm) Frequency stability over temperature ‐30°C~+85°C 1 year Aging (±ppm) at 25°C ‐40 ~ +85 = M ±10 = E ±10 = F ±1 = 1 L ‐PF Packaging (Tape & Reel) RoHS Loose = L 3000pcs = D RoHS = ‐PF Note: It is important to suffix the above part number with full frequency required to give a completed part number as illustrated below. Full Example Part Number : BNH2700‐RF‐KOMEF1L‐PF [27.000MHz] , BNH2457‐RF‐KOMEF1L‐PF [24.576MHz] Drawing control: (Internal use only),Commodity code: 854160 00 00,Issue number: 1,Date: 1/2/2017,Internal reference: H2 ACT (A wholly owned Acal BFi Company) +44 (0) 118 978 8878|[email protected]|www.act.co.uk ISO9001 Registered Specifications subject to change without notification