HD74LS132 Quadruple 2-Input Positive NAND Schmitt-triggers REJ03D0432–0300 Rev.3.00 Jul.13.2005 Features • Ordering Information Part Name Package Type Package Code (Previous Code) Package Abbreviation Taping Abbreviation (Quantity) HD74LS132P DILP-14 pin PRDP0014AB-B (DP-14AV) P — HD74LS132FPEL SOP-14 pin (JEITA) PRSP0014DF-B (FP-14DAV) FP EL (2,000 pcs/reel) PRSP0014DE-A RP (FP-14DNV) Note: Please consult the sales office for the above package availability. HD74LS132RPEL SOP-14 pin (JEDEC) EL (2,500 pcs/reel) Pin Arrangement 1A 1 14 VCC 1B 2 13 4B 1Y 3 12 4A 2A 4 11 4Y 2B 5 10 3B 2Y 6 9 3A GND 7 8 3Y (Top view) Rev.3.00, Jul.13.2005, page 1 of 6 HD74LS132 Circuit Schematic (1/4) VCC 75Ω 20k Input A Output Y B GND Absolute Maximum Ratings Item Symbol Ratings Unit VCC VIN PT Tstg 7 7 400 –65 to +150 V V mW °C Supply voltage Input voltage Power dissipation Storage temperature Recommended Operating Conditions Item Supply voltage Output current Operating temperature Rev.3.00, Jul.13.2005, page 2 of 6 Symbol Min Typ Max Unit VCC 4.75 5.00 5.25 V IOH — — –400 µA IOL — — 8 mA Topr –20 25 75 °C HD74LS132 Electrical Characteristics (Ta = –20 to +75 °C) Item II min. 1.4 0.5 0.4 2.7 — — — — — — — Short-circuit output current IOS –20 — –100 mA VCC = 5.25 V Supply current ICCH ICCL — — — 5.9 8.2 — 11 14 –1.5 mA mA V VCC = 5.25 V VCC = 5.25 V VCC = 4.75 V, IIN = –18 mA Input threshold voltage Symbol VT+ – VT VT – VT– VOH + Hysteresis Output voltage Input threshold current Input current VOL IT + – IT IIH IIL Input clamp voltage VIK Note: * VCC = 5 V, Ta = 25°C typ.* 1.6 0.7 0.9 — — — –0.14 –0.18 — — — max. 1.9 1.0 — — 0.5 0.4 — — 20 –0.4 0.1 Unit V V V V mA mA µA mA mA Condition VCC = 5 V VCC = 5 V VCC = 5 V VCC = 4.75 V, VI = 0.5 V, IOH = –400 µA IOL = 8 mA VCC = 4.75 V, VI = 1.9 V IOL = 4 mA VCC = 5 V, VI = VT+ VCC = 5 V, VI = VT– VCC = 5.25 V, VI = 2.7 V VCC = 5.25 V, VI = 0.4 V VCC = 5.25 V, VI = 7 V V Switching Characteristics (VCC = 5 V, Ta = 25°C) Item Propagation delay time Symbol tPLH tPHL min. — — typ. 15 15 max. 22 22 Unit ns ns Testing Method Test Circuit VCC Output Input 4.5V RL P.G. Zout=50Ω CL Notes: 1. CL includes probe and jig capacitance. 2. All diodes are 1S2074(H). Rev.3.00, Jul.13.2005, page 3 of 6 Condition CL = 15 pF, RL = 2 kΩ HD74LS132 Waveform tTLH Input 10% tTHL 90% 1.6 V 3V 90% 0.7 V tPHL 10% 0V tPLH VOH Output 1.3 V 1.3 V VOL Note: Input pulse; tTLH ≤ 15 ns, tTHL ≤ 6 ns, PRR = 1 MHz, duty cycle 50% Rev.3.00, Jul.13.2005, page 4 of 6 HD74LS132 Package Dimensions JEITA Package Code P-DIP14-6.3x19.2-2.54 RENESAS Code PRDP0014AB-B MASS[Typ.] 0.97g Previous Code DP-14AV D 8 E 14 1 7 b3 Z A1 A Reference Symbol Nom e1 7.62 D 19.2 E 6.3 L A θ bp e Dimension in Millimeters Min e1 A1 0.51 bp 0.40 JEITA Package Code P-SOP14-5.5x10.06-1.27 RENESAS Code PRSP0014DF-B *1 Previous Code FP-14DAV D 0.48 0.56 c 0.19 θ 0° e 2.29 0.25 0.31 2.54 2.79 15° 2.39 L 2.54 MASS[Typ.] 0.23g NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. F 14 7.4 1.30 Z ( Ni/Pd/Au plating ) 20.32 5.06 b3 c Max 8 c HE *2 E bp Index mark Reference Symbol Terminal cross section ( Ni/Pd/Au plating ) 1 Z *3 Nom Max D 10.06 10.5 E 5.50 A2 7 e A1 bp Dimension in Millimeters Min x M 0.00 0.10 0.20 0.34 0.40 0.46 0.15 0.20 0.25 7.80 8.00 A L1 2.20 bp b1 c A c A1 θ y L Detail F 1 θ 0° HE 7.50 e 1.27 x 0.12 y 0.15 1.42 Z L L Rev.3.00, Jul.13.2005, page 5 of 6 8° 0.50 1 0.70 1.15 0.90 HD74LS132 JEITA Package Code P-SOP14-3.95x8.65-1.27 RENESAS Code PRSP0014DE-A *1 MASS[Typ.] 0.13g Previous Code FP-14DNV NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. F D 14 8 c *2 Index mark HE E bp Reference Symbol Terminal cross section ( Ni/Pd/Au plating ) Dimension in Millimeters Min Nom Max D 8.65 9.05 E 3.95 A2 A1 7 1 Z e *3 bp x M 0.14 A c A1 θ L Detail F 0.34 0.40 0.46 0.15 0.20 0.25 6.10 6.20 b1 c y 0.25 1.75 bp L1 1 θ 0° HE 5.80 e 8° 1.27 0.25 x y 0.15 Z 0.635 L L Rev.3.00, Jul.13.2005, page 6 of 6 0.10 A 0.40 1 0.60 1.08 1.27 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> 2-796-3115, Fax: <82> 2-796-2145 Renesas Technology Malaysia Sdn. Bhd. Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 © 2005. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .3.0