IRC TT GUB-GM8BLF-01-2001-G Tanfilm small outline surface mount resistor network Datasheet

TaNFilm® Small Outline Surface
Mount Resistor Network
IRC Advanced Film Division
Ultra precision tantalum
nitride resistance element
on high purity alumina.
GUB Series
•
•
•
•
•
Thin film on ceramic technology
0.220” and 0.300” sizes available
RoHS compliant version available
DESC 87012 and 87013 available
Standard JEDEC packages for automatic placement equipment
Rugged, molded
construction.
Compliant leads to
compensate for
thermal expansion
and contractions.
IRC’s TaNFilm®, Small Outline Integrated Circuit resistor networks are ideally suited for surface mounting.
The 0.05 inch lead spacing provides higher lead density, increased component count, lower installed resistor
cost, and better reliability. They are ideally suited for the latest surface mount assembly techniques, and each
lead can be 100% visually inspected. The compliant leads relieve thermal expansion and contraction stressed
created by soldering and temperature excursions.
The tantalum nitride film system provides precision tolerance, exceptional TCR tracking, and low noise.
TaNFilm® provides stability, high reliability, and long life characteristics. Testing has demonstrated performance
exceeding MIL-PRF-83401 characteristics H.
Electrical Data
GM Type
Schem A: 10 to 150K
Schem B: 10 to 75K
GL Type
Schem A: 10 to 200K
Schem B: 10 to 1000K
Resistance Range (Ω)
Absolute Tolerance
Available to ±0.1%
Ratio Tolerance To R1
Available to ±0.05%
TCR (ppm/°C)
TCR Tracking To R1 (ppm°C)
±25, ±50, ±100
±5
Operating Temperature Range
-55°C to +125°C
Noise
Less than -25 dB
Substrate
High purity alumina substrate
Custom circuits and special testing available.
General Note
IRC reserves the right to make changes in product specification without notice or liability.
All information is subject to IRC’s own data and is considered accurate at time of going to print.
© IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
A subsidiary of
TT electronics plc
GUB Series Issue November 2008 Sheet 1 of 3
TaNFilm® Small Outline Surface
Mount Resistor Network
IRC Advanced Film Division
Physical Data
�
GM7x
GM8x
GL8x
GL0x
A
0.390″ ± 0.005
0.440″ ± 0.005
0.440″ ± 0.005
0.504″ ± 0.008
B
0.220″ ± 0.005
0.220″ ± 0.005
0.297″ ± 0.005
0.297″ ± 0.005
C
0.090″ max
0.090″ max
0.105″ max
0.105″ max
E
0.300″ ± 0.010
0.300″ ± 0.010
0.407″ ± 0.015
0.407″ ± 0.015
F
0.028″ ± 0.007
0.028″ ± 0.007
0.028″ ± 0.007
0.028″ ± 0.007
G
0.010″ ± 0.002
0.010″ ± 0.002
0.010″ ± 0.002
0.010″ ± 0.002
J
0.017″ ± 0.003
0.017″ ± 0.003
0.017″ ± 0.003
0.017″ ± 0.003
K
0.050″ ± 0.005
0.050″ ± 0.005
0.050″ ± 0.005
0.050″ ± 0.005
Standard Circuits
N
N
R1
R1
1
2
3
1
Schematic A
Isolated
2
3
Schematic B
Bussed
(highest number pin is common)
Note: N=number of pads
© IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
GUB Series Issue November 2008 Sheet 2 of 3
TaNFilm® Small Outline Surface
Mount Resistor Network
IRC Advanced Film Division
Power Dissipation Data (watts @ 70°C)
Schematic A
Schematic B
Per Resistor
Per Package
Per Resistor
Per Package
GM Series 14-pin
0.16W
1.0W
0.08W
1.0W
GM Series 16-pin
0.16W
1.2W
0.08W
1.2W
GL Series 16-pin
0.16W
1.2W
0.10W
1.2W
Gl Series 20-pin
0.16W
1.5W
0.10W
1.5W
Power Derating Curve
% Of Rated Power
100
60
0
25
70
125
Ambient Temperature (°C)
Ordering Data
Prefix
GUB
-
GM8A
-
03
-
2001
-
B
-
A
Model
GM7A
GM7ALF
- 14-pin 0.220” wide body, schematic A, 60/40 Sn/Pb leads
- 14-pin, 0.220” wide body, schematic A, RoHS compliant leads
GM7B
GM7BLF
- 14-pin 0.220” wide body, schematic B, 60/40 Sn/Pb leads
- 14-pin, 0.220” wide body, schematic B, RoHS compliant leads
GM8A
GM8ALF
- 16-pin 0.220” wide body, schematic A, 60/40 Sn/Pb leads
- 16-pin, 0.220” wide body, schematic A, RoHS compliant leads
GM8B
GM8BLF
- 16-pin 0.220” wide body, schematic B, 60/40 Sn/Pb leads
- 16-pin, 0.220” wide body, schematic B, RoHS compliant leads
GL8A
GL8ALF
- 16-pin 0.300” wide body, schematic A, 60/40 Sn/Pb leads
- 16-pin, 0.300” wide body, schematic A, RoHS compliant leads
GL8B
GL8BLF
- 16-pin 300” wide body, schematic B, 60/40 Sn/Pb leads
- 16-pin, 0.300” wide body, schematic B, RoHS compliant leads
GL0A
GL0ALF
- 20-pin 0.300” wide body, schematic A, 60/40 Sn/Pb leads
- 20-pin, 0.300” wide body, schematic A, RoHS compliant leads
GL0B
GL0BLF
- 20-pin 0.300” wide body, schematic B, 60/40 Sn/Pb leads
- 20-pin, 0.300” wide body, schematic B, RoHS compliant leads
TCR Code (ppm/°C)
01 = ±100; 02 = ±50; 03 = ±25
Resistance code
Standard MIL resistance code (e.g. 1002 = 10KΩ; 50R1=50.1Ω)
Absolute tolerance
J = ±5%; G = ±2%; F = ±1%; D = ±0.5%; C = ±0.25%; B = ± 0.10%
Ratio tolerance to R1 (if specified)
F = ±1%; D = ±0.5%; C = ±0.25%; B = ± 0.1%; A = ±0.05%
© IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
GUB Series Issue November 2008 Sheet 3 of 3
Similar pages