CHENMKO ENTERPRISE CO.,LTD SURFACE MOUNT N-Channel Enhancement Mode Field Effect Transistor VOLTAGE 60 Volts CHM50N06NPT CURRENT 50 Ampere APPLICATION * Servo motor control. * Power MOSFET gate drivers. * Other switching applications. D2PAK FEATURE * Small package. (D2PAK) * Super high dense cell design for extremely low RDS(ON). * High power and current handing capability. 0.420(10.67) 0.190(4.83) 0.380(9.69) 0.160(4.06) 0.245(6.22) 0.055(1.40) MIN. 0.045(1.14) * N-Channel Enhancement 0.320(8.13) 0.625(15.88) CONSTRUCTION 0.575(14.60) 0.360(9.14) K 0.055(1.40) 0.047(1.19) 1 3 2 0.110(2.79) 0.090(2.29) 0.100(2.54) 0.095(2.41) D (3) CIRCUIT 0.025(0.64) 0.037(0.940) 0.018(0.46) 0.027(0.686) 0.110(2.79) 0.080(2.03) 1 Gate 2 Source 3 Drain ( Heat Sink ) (1) G Dimensions in inches and (millimeters) S (2) Absolute Maximum Ratings Symbol D2PAK TA = 25°C unless otherwise noted Parameter CHM50N06NPT Units VDSS Drain-Source Voltage 60 V VGSS Gate-Source Voltage ±20 V Maximum Drain Current - Continuous 50 ID A - Pulsed (Note 3) PD Maximum Power Dissipation at Tc = 25 °C TJ TSTG 150 131 W Operating Temperature Range -55 to 150 °C Storage Temperature Range -55 to 150 °C 62.5 °C/W Note : 1. Surface Mounted on FR4 Board , t <=10sec 2. Pulse Test , Pulse width <= 300us , Duty Cycle <= 2% 3. Repetitive Rating , Pulse width linited by maximum junction temperature 4. Guaranteed by design , not subject to production trsting Thermal characteristics RθJA Thermal Resistance, Junction-to-Ambient (Note 1) 2008-01 RATING CHARACTERISTIC CURVES ( CHM50N06NPT ) Electrical Characteristics T Symbol A = 25°C unless otherwise noted Parameter Conditions Min 60 Typ Max Units OFF CHARACTERISTICS BVDSS Drain-Source Breakdown Voltage VGS = 0 V, ID = 250 µA IDSS Zero Gate Voltage Drain Current VDS = 54 V, VGS = 0 V I GSSF Gate-Body Leakage I GSSR Gate-Body Leakage ON CHARACTERISTICS V 1 µA VGS = 20V,VDS = 0 V +100 nA VGS = -20V, VDS = 0 V -100 nA 4 V 22 mΩ (Note 2) VGS(th) Gate Threshold Voltage VDS = VGS, ID = 250 µA RDS(ON) Static Drain-Source On-Resistance VGS=10V, ID=50A 14 g FS Forward Transconductance VDS =10V, ID = 25A 19 2 S Dynamic Characteristics Ciss 1420 Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance VDS = 25V, VGS = 0V, f = 1.0 MHz 400 pF 50 SWITCHING CHARACTERISTICS (Note 4) Qg Total Gate Charge Q gs Gate-Source Charge Q gd Gate-Drain Charge 28.2 VDS=48V, ID=48A 37.5 nC 8.5 VGS=10V 7 t on Turn-On Time tr Rise Time I D = 48A , VGS = 10 V t off Turn-Off Time RGEN= 7.5 Ω tf Fall Time V DD= 30V 17.2 34.4 5 10 32.5 65 10 20 nS DRAIN-SOURCE DIODE CHARACTERISTICS AND MAXIMUM RATINGS IS Drain-Source Diode Forward Current V SD Drain-Source Diode Forward Voltage I S = 50A , VGS = 0 V (Note 1) (Note 2) 50 A 1.5 V