FDY300NZ Single N-Channel 2.5V Specified PowerTrench MOSFET General Description Features This Single N-Channel MOSFET has been designed using Fairchild Semiconductor’s advanced Power Trench process to optimize the RDS(ON) @ VGS = 2.5v. • 600 mA, 20 V RDS(ON) = 700 mΩ @ VGS = 4.5 V RDS(ON) = 850 mΩ @ VGS = 2.5 V Applications • ESD protection diode (note 3) • Li-Ion Battery Pack • RoHS Compliant 1S G 1 G 3 S D 2 D Absolute Maximum Ratings Symbol o TA=25 C unless otherwise noted Parameter VDSS VGSS Drain-Source Voltage Gate-Source Voltage ID Drain Current – Continuous – Pulsed Power Dissipation (Steady State) PD (Note 1a) 1a) (Note 1a) 1a) (Note 1b) 1 TJ, TSTG Operating and Storage Junction Temperature Range Ratings Unit s 20 V V ± 12 600 1000 625 446 –55 to +150 mA mW °C Thermal Characteristics RθJA Thermal Resistance, Junction-to-Ambient (Note 1a) 1a) 200 RθJA Thermal Resistance, Junction-to-Ambient (Note 1b) 1 280 °C/W Package Marking and Ordering Information Device Marking Device Reel Size Tape width Quantity C FDY300NZ 7 ’’ 8 mm 3000 units 2006 Fairchild Semiconductor Corporation FDY300NZ Rev A www.fairchildsemi.com FDY300NZ Single N-Channel 2.5V Specified PowerTrench MOSFET January 2006 Symbol TA = 25°C unless otherwise noted Parameter Test Conditions Min Typ Max Units Off Characteristics BVDSS ∆BVDSS ∆TJ IDSS IGSS Drain–Source Breakdown Voltage Breakdown Voltage Temperature Coefficient Zero Gate Voltage Drain Current Gate–Body Leakage, On Characteristics VGS = 0 V, ID = 250 µA 20 V 15 ID = 250 µA, Referenced to 25°C mV/°C VDS = 16 V, VGS = 0 V VGS = ± 12 V, VDS = 0 V VGS = ± 4.5 V, VDS = 0 V 1 ± 10 ±1 µA µA µA 1.0 3 1.5 V mV/°C 0.24 0.36 0.70 0.35 1.8 0.70 0.85 1.25 1.00 Ω (Note 2) VGS(th) ∆VGS(th) ∆TJ RDS(on) Gate Threshold Voltage Gate Threshold Voltage Temperature Coefficient Static Drain–Source On–Resistance gFS Forward Transconductance VDS = VGS, ID = 250 µA ID = 250 µA, Referenced to 25°C VGS = 4.5 V, ID = 600 mA VGS = 2.5 V, ID = 500 mA VGS = 1.8 V, ID = 150 mA VGS = 4.5 V, ID=600mA, TJ = 125°C VDS = 5 V, ID = 600 mA 0.6 S Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance Switching Characteristics td(on) Turn–On Delay Time tr Turn–On Rise Time td(off) Turn–Off Delay Time tf Turn–Off Fall Time Qg Total Gate Charge Qgs Gate–Source Charge Qgd Gate–Drain Charge VDS = 10 V, f = 1.0 MHz V GS = 0 V, trr Qrr pF 20 pF 10 pF (Note 2) VDD = 10 V, VGS = 4.5 V, VDS = 10 V, VGS = 4.5 V ID = 1 A, RGEN = 6 Ω ID = 600 mA, Drain–Source Diode Characteristics and Maximum Ratings VSD 60 Drain–Source Diode Forward Voltage Diode Reverse Recovery Time Diode Reverse Recovery Charge VGS = 0 V, IS = 150 mA IF = 600 mA, dIF/dt = 100 A/µs (Note 2) 6 12 ns 8 16 ns 8 16 ns 2.4 4.8 ns 0.8 1.1 nC 0.16 nC 0.26 nC 0.7 1.2 8 1 V nS nC Notes: 1. RθJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of the drain pins. RθJC is guaranteed by design while RθCA is determined by the user' s board design. a) 200°C/W when mounted on a 1in2 pad of 2 oz copper b) 280°C/W when mounted on a minimum pad of 2 oz copper Scale 1 : 1 on letter size paper 2. Pulse Test: Pulse Width < 300µs, Duty Cycle < 2.0% 3. The diode connected between the gate and source serves only as protection againts ESD. No gate overvoltage rating is implied. FDY300NZ Rev A www.fairchildsemi.com FDY300NZ Single N-Channel 2.5V Specified PowerTrench MOSFET Electrical Characteristics VGS = 4.5V 3.5V 2.6 3.0V RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE ID, DRAIN CURRENT (A) 1 2.5V 0.8 2.0V 0.6 0.4 0.2 2.4 VGS = 2.0V 2.2 2 1.8 1.6 2.5V 1.4 3.0V 1.2 3.5V 0.8 0 0 0.25 0.5 0.75 0 1 0.2 Figure 1. On-Region Characteristics. 1 ID = 300mA 1.4 1.2 1 0.8 0.6 -25 0.8 0.9 ID = 600mA VGS = 4.5V -50 0.6 Figure 2. On-Resistance Variation with Drain Current and Gate Voltage. RDS(ON), ON-RESISTANCE (OHM) RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE 1.6 0.4 ID, DRAIN CURRENT (A) VDS, DRAIN-SOURCE VOLTAGE (V) 0 25 50 75 100 125 0.8 0.7 0.6 TA = 125oC 0.5 0.4 0.3 TA = 25oC 0.2 150 1 o 2 TJ, JUNCTION TEMPERATURE ( C) 3 4 5 VGS, GATE TO SOURCE VOLTAGE (V) Figure 3. On-Resistance Variation with Temperature. Figure 4. On-Resistance Variation with Gate-to-Source Voltage. 1 VDS = 5V 25oC o TA = -55 C 1.2 IS, REVERSE DRAIN CURRENT (A) 1.5 ID, DRAIN CURRENT (A) 4.5V 1 125oC 0.9 0.6 0.3 VGS = 0V 0.1 TA = 125oC 0.01 25oC -55oC 0.001 0.0001 0 0.5 1 1.5 2 2.5 VGS, GATE TO SOURCE VOLTAGE (V) Figure 5. Transfer Characteristics. FDY300NZ Rev A 3 0 0.2 0.4 0.6 0.8 1 1.2 VSD, BODY DIODE FORWARD VOLTAGE (V) Figure 6. Body Diode Forward Voltage Variation with Source Current and Temperature. www.fairchildsemi.com FDY300NZ Single N-Channel 2.5V Specified PowerTrench MOSFET Typical Characteristics 100 ID = 600mA f = 1MHz VGS = 0 V 90 4 80 VDS = 5V CAPACITANCE (pF) VGS, GATE-SOURCE VOLTAGE (V) 5 10V 3 15V 2 1 Ciss 70 60 50 40 Coss 30 20 10 0 Crss 0 0 0.2 0.4 0.6 0.8 1 0 4 Qg, GATE CHARGE (nC) Figure 7. Gate Charge Characteristics. 16 20 30 P(pk), PEAK TRANSIENT POWER (W) 1ms RDS(ON) LIMIT 1 1s 10ms 100ms 10s DC 0.1 VGS = 4.5V SINGLE PULSE RθJA = 280oC/W TA = 25oC 0.01 0.1 1 10 100 SINGLE PULSE RθJA = 280°C/W TA = 25°C 25 20 15 10 5 0 0.0001 0.001 0.01 0.1 1 10 100 1000 t1, TIME (sec) VDS, DRAIN-SOURCE VOLTAGE (V) Figure 9. Maximum Safe Operating Area. r(t), NORMALIZED EFFECTIVE TRANSIENT THERMAL RESISTANCE 12 Figure 8. Capacitance Characteristics. 10 ID, DRAIN CURRENT (A) 8 VDS, DRAIN TO SOURCE VOLTAGE (V) Figure 10. Single Pulse Maximum Power Dissipation. 1 D = 0.5 RθJA(t) = r(t) * RθJA RθJA =280 °C/W 0.2 0.1 P(pk) 0.1 t1 0.05 t2 TJ - TA = P * RθJA(t) Duty Cycle, D = t1 / t2 0.02 0.01 SINGLE PULSE 0.01 0.0001 0.001 0.01 0.1 1 10 100 t1, TIME (sec) Figure 11. Transient Thermal Response Curve. Thermal characterization performed using the conditions described in Note 1b. Transient thermal response will change depending on the circuit board design. FDY300NZ Rev A www.fairchildsemi.com 1000 FDY300NZ Single N-Channel 2.5V Specified PowerTrench MOSFET Typical Characteristics 1.70 1.50 0.50 0.35 0.25 0.50 3 1.70 1.50 0.98 0.78 1 1.80 1.14 2 (0.15) 0.50 0.50 0.66 LAND PATTERN RECOMMENDATION 1.00 0.78 0.58 0.43 0.28 0.20 0.04 SEE DETAIL A 0.54 0.34 0.10 0.00 DETAIL A SCALE 2 : 1 NOTES: UNLESS OTHERWISE SPECIFIED A) THIS PACKAGE CONFORMS TO EIAJ SC89 PACKAGING STANDARD. B) ALL DIMENSIONS ARE IN MILLIMETERS. C) DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH, AND TIE BAR EXTRUSIONS. FDY300NZ Rev A www.fairchildsemi.com FDY300NZ Single N-Channel 2.5V Specified PowerTrench MOSFET Dimensional Outline and Pad Layout TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FAST® ActiveArray™ FASTr™ Bottomless™ FPS™ Build it Now™ FRFET™ CoolFET™ GlobalOptoisolator™ CROSSVOLT™ GTO™ DOME™ HiSeC™ EcoSPARK™ I2C™ E2CMOS™ i-Lo™ EnSigna™ ImpliedDisconnect™ FACT™ IntelliMAX™ FACT Quiet Series™ Across the board. Around the world.™ The Power Franchise® Programmable Active Droop™ ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerEdge™ PowerSaver™ PowerTrench® QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ μSerDes™ ScalarPump™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TCM™ TinyLogic® TINYOPTO™ TruTranslation™ UHC™ UltraFET® UniFET™ VCX™ Wire™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I18