Vishay MMSZ5267 Small signal zener diode Datasheet

MMSZ5225-V to MMSZ5267-V
www.vishay.com
Vishay Semiconductors
Small Signal Zener Diodes
FEATURES
• Silicon planar power Zener diodes
• Standard Zener voltage tolerance is ± 5 % with
a “B” suffix (e.g.: MMSZ5225B-V), suffix “C” is
± 2 % tolerance
• These diodes are also available in MiniMELF
case with the designation TZM5225 to
TZM5267, DO-35 case with type designation
1N5225 to 1N5267 and SOT-23 case with the type
designation MMBZ5225-V to MMBZ5267-V
• AEC-Q101 qualified
PRIMARY CHARACTERISTICS
PARAMETER
VALUE
UNIT
VZ range nom.
3.3 to 75
V
Test current IZT
1.7 to 20
mA
VZ specification
Thermal equilibrium
Int. construction
Single
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
ORDERING INFORMATION
DEVICE NAME
ORDERING CODE
TAPED UNITS PER REEL
MINIMUM ORDER QUANTITY
MMSZ5225-V to MMSZ5267-V
MMSZ5225-V to
MMSZ5267-V-series-GS18
10 000 (8 mm tape on 13" reel)
10 000/box
MMSZ5225-V to MMSZ5267-V
MMSZ5225-V to
MMSZ5267-V-series-GS08
3000 (8 mm tape on 7" reel)
15 000/box
PACKAGE
PACKAGE NAME
WEIGHT
SOD-123
10.3 mg
MOLDING COMPOUND MOISTURE SENSITIVITY
FLAMMABILITY RATING
LEVEL
UL 94 V-0
MSL level 1
(according J-STD-020)
SOLDERING
CONDITIONS
260 °C/10 s at terminals
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
TL = 75 °C, on FR - 4 or FR - 5 board with
minimum recommended solder pad layout
Ptot
500
mW
RthJA
340
K/W
Junction temperature, maximum
Tj
150
Operating temperature range
Tj
- 55 to + 150
Tstg
- 65 to + 150
Power dissipation
Zener current
Thermal resistance junction to ambient air
Storage temperature range
Rev. 1.8, 23-Mar-12
See table “Characteristics”
On FR - 4 or FR - 5 board with minimum
recommended solder pad layout
°C
Document Number: 85774
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MMSZ5225-V to MMSZ5267-V
www.vishay.com
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
ZENER VOLTAGE
RANGE (1)
PART NUMBER
MARKING
CODE
VZ at IZT1
V
NOM.
TEST
CURRENT
IZT1
IZT2
mA
REVERSE
LAEKAGE
CURRENT
IR at VR
μA
MAX.
DYNAMIC
RESISTANCE (2)
ZZ at IZT1
ZZK at IZT2

V
MAX.
TEMPERATURE
COEFFICIENT
VZ
%/°C
MAX.
TYP.
MMSZ5225
C5
3
20
0.25
50
1
30
1600
- 0.075
MMSZ5226
D1
3.3
20
0.25
25
1
28
1600
- 0.07
MMSZ5227
D2
3.6
20
0.25
15
1
24
1700
- 0.065
MMSZ5228
D3
3.9
20
0.25
10
1
23
1900
- 0.06
MMSZ5229
D4
4.3
20
0.25
5
1
22
2000
- 0.055
MMSZ5230
D5
4.7
20
0.25
5
2
19
1900
± 0.030
MMSZ5231
E1
5.1
20
0.25
5
2
17
1600
± 0.030
MMSZ5232
E2
5.6
20
0.25
5
3
11
1600
0.038
MMSZ5233
E3
6
20
0.25
5
3.5
7
1600
0.038
MMSZ5234
E4
6.2
20
0.25
5
4
7
1000
0.045
MMSZ5235
E5
6.8
20
0.25
3
5
5
750
0.05
MMSZ5236
F1
7.5
20
0.25
3
6
6
500
0.058
MMSZ5237
F2
8.2
20
0.25
3
6.5
8
500
0.062
MMSZ5238
F3
8.7
20
0.25
3
6.5
8
600
0.065
MMSZ5239
F4
9.1
20
0.25
3
7
10
600
0.068
MMSZ5240
F5
10
20
0.25
3
8
17
600
0.075
MMSZ5241
H1
11
20
0.25
2
8.4
22
600
0.076
MMSZ5242
H2
12
20
0.25
1
9.1
30
600
0.077
MMSZ5243
H3
13
9.5
0.25
0.5
9.9
13
600
0.079
MMSZ5244
H4
14
9
0.25
0.1
10
15
600
0.082
MMSZ5245
H5
15
8.5
0.25
0.1
11
16
600
0.082
MMSZ5246
J1
16
7.8
0.25
0.1
12
17
600
0.083
MMSZ5247
J2
17
7.4
0.25
0.1
13
19
600
0.084
MMSZ5248
J3
18
7
0.25
0.1
14
21
600
0.085
MMSZ5249
J4
19
6.6
0.25
0.1
14
23
600
0.086
MMSZ5250
J5
20
6.2
0.25
0.1
15
25
600
0.086
MMSZ5251
K1
22
5.6
0.25
0.1
17
29
600
0.087
MMSZ5252
K2
24
5.2
0.25
0.1
18
33
600
0.087
MMSZ5253
K3
25
5
0.25
0.1
19
35
600
0.089
MMSZ5254
K4
27
4.6
0.25
0.1
21
41
600
0.09
MMSZ5255
K5
28
4.5
0.25
0.1
21
44
600
0.091
MMSZ5256
M1
30
4.2
0.25
0.1
23
49
600
0.091
MMSZ5257
M2
33
3.8
0.25
0.1
25
58
700
0.092
MMSZ5258
M3
36
3.4
0.25
0.1
27
70
700
0.093
MMSZ5259
M4
39
3.2
0.25
0.1
30
80
800
0.094
MMSZ5260
M5
43
3
0.25
0.1
33
93
900
0.095
MMSZ5261
N1
47
2.7
0.25
0.1
36
105
1000
0.095
MMSZ5262
N2
51
2.5
0.25
0.1
39
125
1100
0.096
MMSZ5263
N3
56
2.2
0.25
0.1
43
150
1300
0.096
MMSZ5264
N4
60
2.1
0.25
0.1
46
170
1400
0.097
MMSZ5265
N5
62
2
0.25
0.1
47
185
1400
0.097
MMSZ5266
P1
68
1.8
0.25
0.1
52
230
1600
0.097
MMSZ5267
P2
75
1.7
0.25
0.1
56
270
1700
0.098
Notes
• Maximum VF = 0.9 V, at IF = 10 mA
(1) Measured with device junction in thermal equilibrium
(2) The Zener Impedance is derived from the 1 kHz AC voltage which results when an AC current having an RMS value equal to 10 % of the
Zener current (IZT1 or IZT2) is superimposed on IZT1 or IZT2. Zener Impedance is measured at two points to insure a sharp knee on the
breakdown curve and to eliminate unstable units
Rev. 1.8, 23-Mar-12
Document Number: 85774
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MMSZ5225-V to MMSZ5267-V
www.vishay.com
Vishay Semiconductors
0.10 (0.004)
0.15 (0.006)
8°
0.45 (0.018)
0.25 (0.010)
0° to
0.2 (0.008)
1 (0.039)
1.35 (0.053)
0.1 (0.004) max.
PACKAGE DIMENSIONS in millimeters (inches): SOD-123
0.5 (0.020) ref.
Cathode bar
Mounting Pad Layout
2.85 (0.112)
2.55 (0.100)
0.85 (0.033)
2.5 (0.098)
0.85 (0.033)
3.55 (0.140)
1.7 (0.067)
3.85 (0.152)
1.40 (0.055)
0.45 (0.018)
0.65 (0.026)
0.85 (0.033)
Rev. 4 - Date: 24. Sep. 2009
Document no.: S8-V-3910.01-001 (4)
17432
Rev. 1.8, 23-Mar-12
Document Number: 85774
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
1
Document Number: 91000
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
MMSZ5246C-V-GS08 MMSZ5230B-GS08 MMSZ5246B-GS08 MMSZ5247B-GS08 MMSZ5241B-GS08
MMSZ5253B-GS08 MMSZ5259B-GS08 MMSZ5238C-V-GS08 MMSZ5229C-V-GS08 MMSZ5254C-V-GS08
MMSZ5267B-V-GS08 MMSZ5256B-GS08 MMSZ5233C-V-GS08 MMSZ5266C-V-GS08 MMSZ5258B-GS08
MMSZ5254B-V-GS08 MMSZ5250B-GS08 MMSZ5245B-GS08 MMSZ5267C-V-GS08 MMSZ5262C-V-GS08
MMSZ5227B-V-GS08 MMSZ5239B-GS08 MMSZ5246B-V-GS08 MMSZ5253C-V-GS08 MMSZ5255B-GS08
MMSZ5257B-GS08 MMSZ5236B-GS08 MMSZ5231B-GS08 MMSZ5257C-V-GS08 MMSZ5226C-V-GS08
MMSZ5260B-V-GS08 MMSZ5253B-V-GS08 MMSZ5266B-V-GS08 MMSZ5227C-V-GS08 MMSZ5249B-GS08
MMSZ5229B-GS08 MMSZ5244B-GS08 MMSZ5264C-V-GS08 MMSZ5225C-V-GS08 MMSZ5261C-V-GS08
MMSZ5249C-V-GS08 MMSZ5251B-GS08 MMSZ5242C-V-GS08 MMSZ5226B-V-GS08 MMSZ5248B-GS08
MMSZ5247C-V-GS08 MMSZ5233B-GS08 MMSZ5235B-V-GS08 MMSZ5240B-GS08 MMSZ5232B-GS08
MMSZ5236C-V-GS08 MMSZ5234B-GS08 MMSZ5225B-V-GS08 MMSZ5258C-V-GS08 MMSZ5238B-V-GS08
MMSZ5245B-V-GS08 MMSZ5236B-V-GS08 MMSZ5242B-V-GS08 MMSZ5242B-GS08 MMSZ5252B-GS08
MMSZ5243B-GS08 MMSZ5228B-GS08 MMSZ5238B-GS08 MMSZ5237B-GS08 MMSZ5248C-V-GS08
MMSZ5245C-V-GS08 MMSZ5228C-V-GS08 MMSZ5240C-V-GS08 MMSZ5255B-V-GS08 MMSZ5259B-V-GS08
MMSZ5254B-GS08 MMSZ5260C-V-GS08 MMSZ5235B-GS08 MMSZ5225B-V-GS18 MMSZ5226B-V-GS18
MMSZ5226C-V-GS18 MMSZ5227C-V-GS18 MMSZ5228B-V-GS18 MMSZ5228C-V-GS18 MMSZ5229B-V-GS18
MMSZ5229C-V-GS18 MMSZ5230C-V-GS18 MMSZ5231B-V-GS18 MMSZ5231C-V-GS18 MMSZ5232C-V-GS18
MMSZ5233B-V-GS18 MMSZ5233C-V-GS18 MMSZ5234B-V-GS18 MMSZ5234C-V-GS18 MMSZ5235B-V-GS18
MMSZ5235C-V-GS18 MMSZ5236B-V-GS18 MMSZ5236C-V-GS18 MMSZ5237B-V-GS18 MMSZ5238C-V-GS18
MMSZ5239C-V-GS18 MMSZ5240B-V-GS18 MMSZ5240C-V-GS18 MMSZ5241B-V-GS18 MMSZ5241C-V-GS18
Similar pages