Marketing Bulletin DATE: January 1st, 2006 TO: All Sales Personnel FROM: Mark Stoner RE: Product Termination To all concerned parties, This bulletin is to notify all customers of the discontinuation of the following Ecliptek series effective January 1st, 2006: Series EB13C8 Description 3.3V 5 x 7mm SMD Oscillator Recommended Replacement EC26 In compliance with our End of Life (EOL) policy, this will serve as advanced notice of product termination. New orders will not be accepted after April 1st, 2006, with delivery to conclude by July 1st 2006. If there are any questions pertaining to this bulletin, please fell free to contact me. Thank you again for your cooperation. Best Regards, Mark W. Stoner Director of Marketing Ecliptek Corporation 3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234 EB13C8 Series EB13C8 • RoHS Compliant (Pb-Free) • Low Jitter • Ceramic SMD package • 3.3V supply voltage • LVHCMOS • Stability to 20ppm • Standby Function • Available in tube or tape and reel H 1.6 L 7.0 W 5.0 OSCILLATOR OBSOLETE ELECTRICAL SPECIFICATIONS Frequency Range 19.440MHz to 125.000MHz and 125.009MHz, 125.009375MHz, 125.010MHz, 127MHz, 128MHz, 130MHz, 132MHz, 133MHz, 133.333MHz, 137.472MHz, 142.850MHz, 150MHz, 155.520MHz and 156.250MHz Operating Temperature Range 0°C to 70°C -40°C to 85°C Not available with ±20ppm option > 106.250MHz Storage Temperature Range -55°C to 125°C Supply Voltage (VDD) 3.3VDC ±10% Input Current 10mA Maximum 19.440MHz to 35.000MHz 20mA Maximum 35.001MHz to 70.000MHz 40mA Maximum 70.001MHz to 125.000MHz 60mA Maximum 125.001MHz to 156.250MHz Frequency Tolerance / Stability Inclusive of all conditions: Calibration Tolerance at 25°C, ±100ppm, ±50ppm, ±25ppm or ±20ppm Maximum Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25°C, Shock, and Vibration Output Voltage Logic High (VOH) 90% of VDD Min. IOH= -8mA Output Voltage Logic Low (VOL) 10% of VDD Max. IOL= +8mA Rise / Fall Time 5 nSec Maximum 20% to 80% of Waveform w/15pF HCMOS Load from 19.440MHz to 35.000MHz 7 nSec Maximum 20% to 80% of Waveform w/30pF HCMOS Load from 19.440MHz to 35.000MHz 5 nSec Maximum 20% to 80% of Waveform w/HCMOS Load from 35.001MHz to 50.000MHz 4 nSec Maximum 20% to 80% of Waveform w/HCMOS Load from 50.001MHz to 80.000MHz 2 nSec Maximum 20% to 80% of Waveform w/HCMOS Load from 80.001MHz to 125.000MHz 1 nSec Maximum 20% to 80% of Waveform w/HCMOS Load from 125.009MHz to 156.250MHz Duty Cycle 50 ±10(%) at 50% of Waveform 50 ±5(%) at 50% of Waveform < 125.000MHz 50 ±5(%) at 50% of waveform, at 25°C, at 3.3Vdc > 125.000MHz Load Drive Capability 30pF HCMOS Load Maximum < 35.000MHz 15pF HCMOS Load Maximum > 35.001MHz Tri-State Input Voltage Enables Output No Connection Enables Output VIH :≥70% of VDD Disables Output: High Impedance VIL :≤30% of VDD Standby Current 10µA Maximum Disabled Output: High Impedance Start Up Time 10 mSec Maximum RMS Phase Jitter 5 pSec Maximum 19.440MHz to 40.000MHz, FJ = 12kHz to 20MHz 3 pSec Maximum 40.001MHz to 70.000MHz, FJ = 12kHz to 20MHz 1 pSec Maximum 70.001MHz to 156.250MHz, FJ = 12kHz to 20MHz MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EB13C8 CERAMIC 3.3V OS2H 04/05 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EB13C8 F 2 H - 40.000M TR PACKAGING OPTIONS Blank=Bulk, TR=Tape and Reel (Standard) FREQUENCY TOLERANCE / STABILITY C=±100ppm Maximum over 0°C to +70°C D=±50ppm Maximum over 0°C to +70°C E=±25ppm Maximum over 0°C to +70°C F=±20ppm Maximum over 0°C to +70°C G=±100ppm Maximum over -40°C to +85°C H=±50ppm Maximum over -40°C to +85°C J=±25ppm Maximum over -40°C to +85°C K=±20ppm Maximum over -40°C to +85°C FREQUENCY OUTPUT CONTROL FUNCTION H=Tri-State DUTY CYCLE 1=50 ±10(%) 2=50 ±5(%) OBSOLETE MECHANICAL DIMENSIONS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS ALL DIMENSIONS IN MILLIMETERS Pin 1: Tri-State Pin 2: Case Ground TAPE AND REEL DIMENSIONS Pin 3: Output Pin 4: Supply Voltage Tolerances = ±0.1 ALL DIMENSIONS IN MILLIMETERS TAPE A B C D E 16+.3-.1 7.5±.1 6.75±.1 4 ±.1 2±.1 F M N O P Q 1.5 MIN 50 MIN 20.2 MIN 13±.2 40 MIN QTY/REEL 1,000 REEL F G H J K L R S T U V 8±.1 B0* 1.5 +.1-0 A0* .3 ±.05 K0* 2.5 MIN 10 MIN 22.4 MAX 360 MAX 16.4+2-0 *Compliant to EIA 481A MARKING SPECIFICATIONS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Line 1: ECLIPTEK Characteristic Specification Fine Leak Test Gross Leak Test Mechanical Shock Vibration Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-202, Method 210 MIL-STD-202, Method 215 Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 3: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EB13C8 CERAMIC 3.3V OS2H 04/05 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.