GI250-1 THRU GI250-4 HIGH VOLTAGE GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 1000 to 4000 Volts Forward Current - 0.25 Ampere Features Plastic package has Underwriters Laboratory Flammability High temperature metallurgically bonded construction classification 94V-0 Glass passivated cavity-free junctions Capable of meeting environmental standards of MIL-S-19500 High temperature soldering guaranteed: 350 /10 seconds, 0.375 (9.5mm) lead length, 5 lbs. (2.3Kg) tension. Mechanical Data DIM ENSIONS Case: DO-41 molded plastic over glass body Terminals: Plated axial leads, solderable per MIL-STD-750, method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.012 ounce, 0.335 gram inches DIM mm Min. Max. Min. Max. A 0.165 0.205 4.2 5.2 B 0.079 0.106 2.0 2.7 C 0.028 0.034 0.71 0.86 D 1.000 - 25.40 - Maximum Ratings and Electrical Characteristics Ratings at 25 ambient temperature unless otherwise specified. Symbols GI250-1 GI250-2 GI250-3 GI250-4 Units Volts Maximum repetitive peak reverse voltage VRRM 1000 2000 3000 4000 Maximum RMS voltage VRMS 700 1400 2100 2800 Volts Maximum DC blocking voltage VDC 1000 2000 3000 4000 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=75 I(AV) 0.25 Amp Peak forward surge current 8.3mS single half sine-wave superimposed on rated load (MIL-STD-750D 4066 method) at TA=75 IFSM 15.0 Amps Maximum instantaneous forward voltage at 0.25A VF 3.5 Volts IR 5.0 50.0 A Typical reverse recovery time (Note 1) Trr 2.0 S Typical junction capacitance (Note 2) CJ 3.0 F 130.0 /W Maximum DC reverse current at rated DC blocking voltage TA=25 TA=100 Typical thermal resistance (Note 3) Operating junction and storage temperature range R JA TJ, TSTG -60 to +175 Notes: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0MHz and applied reverse voltage of 4.0 volts (3) Thermal resistance from junction to ambient at 0.375 (9.5mm) lead length, P.C.B. mounted 1 Note RATINGS AND CHARACTERISTIC CURVES 2