Murata BLM15AX100SN1 Emifil (inductor type) chip ferrite bead Datasheet

Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
Data Sheet
1
EMIFILr (Inductor type) Chip Ferrite Bead
BLM15AX_SN Series (0402 Size)
c Dimensions
c Equivalent Circuit
0.5±0.05
0.25±0.1
1.0±0.05
0.5±0.05
(Resistance element becomes dominant
at high frequencies.)
: Electrode
(in mm)
c Packaging
Code
Packaging
Minimum Quantity
D
180mm Paper Tape
10000
J
330mm Paper Tape
50000
B
Bulk(Bag)
1000
c Rated Value (p: packaging code)
Impedance
(at 100MHz/20°C)
Impedance
(at 1GHz/20°C)
Rated Current
DC Resistance
Operating
Temperature Range
BLM15AX100SN1p
10ohm (Typ.)
-
1740mA
0.015ohm max.
-55 to +125°C
BLM15AX300SN1p
30ohm ±25%
-
1100mA
0.06ohm max.
-55 to +125°C
BLM15AX700SN1p
70ohm ±25%
-
780mA
0.1ohm max.
-55 to +125°C
BLM15AX121SN1p
120ohm ±25%
-
700mA
0.13ohm max.
-55 to +125°C
BLM15AX221SN1p
220ohm ±25%
-
600mA
0.18ohm max.
-55 to +125°C
BLM15AX601SN1p
600ohm ±25%
-
500mA
0.34ohm max.
-55 to +125°C
BLM15AX102SN1p
1000ohm ±25%
-
350mA
0.49ohm max.
-55 to +125°C
Part Number
Number of Circuits: 1
c Impedance-Frequency Characteristics (Main Items)
1500
BLM15AX102SN1
1200
Impedance (Ω)
BLM15AX601SN1
900
BLM15AX221SN1
BLM15AX121SN1
600
BLM15AX700SN1
BLM15AX300SN1
300
BLM15AX100SN1
0
1
10
100
Frequency (MHz)
1000
3000
Continued on the following page.
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.7.8
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
Data Sheet
2
Continued from the preceding page.
c Impedance-Frequency Characteristics
c Impedance-Frequency Characteristics
BLM15AX100SN1
BLM15AX300SN1
16
60
Z
45
Impedance (Ω)
Impedance (Ω)
12
R
8
X
4
0
Z
30
R
X
15
1
10
100
Frequency (MHz)
1000
0
3000
c Impedance-Frequency Characteristics
1
160
Impedance (Ω)
Z
Impedance (Ω)
3000
200
100
80
R
60
40
X
Z
120
R
80
X
40
20
1
10
100
Frequency (MHz)
1000
0
3000
c Impedance-Frequency Characteristics
1
10
100
Frequency (MHz)
1000
3000
c Impedance-Frequency Characteristics
BLM15AX221SN1
BLM15AX601SN1
400
1000
800
Impedance (Ω)
300
Impedance (Ω)
1000
BLM15AX121SN1
120
Z
200
R
X
100
0
100
Frequency (MHz)
c Impedance-Frequency Characteristics
BLM15AX700SN1
0
10
Z
600
R
400
X
200
1
10
100
Frequency (MHz)
1000
0
3000
1
10
100
Frequency (MHz)
1000
3000
Continued on the following page.
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.7.8
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
Data Sheet
3
Continued from the preceding page.
c Impedance-Frequency Characteristics
BLM15AX102SN1
1500
Impedance (Ω)
1200
Z
R
900
600
X
300
0
1
10
100
Frequency (MHz)
1000
3000
c !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat and deteriorate
the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.7.8
http://www.murata.com/
Similar pages