IXYS LBA716STR Dual single-pole optomos relays normally open & normally closed Datasheet

LBA716
Dual Single-Pole OptoMOS® Relays
Normally Open & Normally Closed
INTEGRATED CIRCUITS DIVISION
Parameter
Load Voltage
Load Current
On-Resistance (max)
Rating
60
1
0.4
Units
V
Arms / ADC

Description
LBA716 is a 60V, 1A, 0.4 dual Solid State Relay
integrating independent normally open
(1-Form-A) and normally closed (1-Form-B)
relays into a single package. It features a superior
combination of low on-resistance and enhanced peak
load current (5A max.) handling capability.
Features
• 3750Vrms Input/Output Isolation
• Low Drive Power Requirements
(TTL/CMOS Compatible)
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Small 8-Pin Package
• Machine Insertable, Wave Solderable
• Surface Mount Version
• Tape & Reel available
Approvals
• UL Recognized Component: File # E76270
• CSA Certified Component: Certificate # 1175739
• EN/IEC 60950-1 Certified Component
TUV Certificate B 09 07 49410 004
Ordering Information
Part #
LBA716
LBA716S
LBA716STR
Applications
• Telecommunications
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Utility Meters (gas, oil, electric and water)
• Medical Equipment-Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
Description
8-Pin DIP (50/Tube)
8-Pin Surface Mount (50/Tube)
8-Pin Surface Mount (1000/Reel)
Switching Characteristics of
Normally Open Devices
Form-A
IF
90%
10%
ILOAD
ton
toff
Pin Configuration
+ Control - Normally Closed
– Control - Normally Closed
+ Control - Normally Open
– Control - Normally Open
1
8
2
7
3
6
4
5
Switching Characteristics of
Normally Closed Devices
Normally Closed
Form-B
Normally Open
IF
ILOAD
90%
10%
toff
Pb
DS-LBA716-R03
ton
e3
www.ixysic.com
1
INTEGRATED CIRCUITS DIVISION
LBA716
Absolute Maximum Ratings @ 25ºC
Parameter
Blocking Voltage
Reverse Input Voltage
Input Control Current
Peak (10ms)
Input Power Dissipation 1
Total Power Dissipation 2
Isolation Voltage, Input to Output
Operational Temperature
Storage Temperature
1
Derate linearly 1.33 mW / ºC
2
Derate linearly 6.67 mW / ºC
Ratings
60
5
50
1
Units
VP
V
mA
A
150
800
3750
-40 to +85
-40 to +125
mW
mW
Vrms
°C
°C
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Electrical Characteristics @ 25ºC
Parameter
Characteristics: Form-A (Normally Open)
Load Current
Conditions
Continuous
Peak
t < 10ms
On-Resistance
IL=1A
Off-State Leakage Current
VL=60V
Output Capacitance
50V, f=1MHz
Switching Speeds
Turn-On
IF=5mA, VL=10V
Turn-Off
Input Control Current to Activate
IL=1A
Input Control Current to Deactivate
Characteristics: Form-B (Normally Closed)
Load Current
Continuous
Peak
t < 10ms
On-Resistance
IL=0.5A
Off-State Leakage Current
VL=60V, IF=5mA
Output Capacitance
IF=5mA, 50V, f=1MHz
Switching Speeds
Turn-On
IF=5mA, VL=10V
Turn-Off
Input Control Current to Activate
Input Control Current to Deactivate
IL=0.5A
Common Characteristics: Form-A and Form-B
Input Voltage Drop
IF=5mA
Reverse Input Current
VR=5V
Capacitance, Input to Output
-
Symbol
Min
Typ
Max
Units
IL
-
-
1
Arms / ADC
ILPK
RON
ILEAK
COUT
-
0.21
105
±5
0.4
1
-
AP

A
pF
ton
toff
IF
IF
0.1
0.7
0.09
-
5
5
2
-
mA
mA
IL
-
-
0.5
Arms / ADC
ILPK
RON
ILEAK
COUT
-
1.63
280
±1.2
2
1
-
AP

A
pF
ton
toff
IF
IF
0.1
0.58
0.76
-
5
5
2
-
mA
mA
VF
IR
CI/O
0.9
-
1.2
3
1.4
10
-
V
A
pF
ms
ms
*NOTE: If both poles operate simultaneously, then load current must be derated so as not to exceed the package power dissipation value.
2
www.ixysic.com
R03
INTEGRATED CIRCUITS DIVISION
LBA716
Form-A RELAY PERFORMANCE DATA @25ºC (Unless Otherwise Noted)*
25
15
10
5
15
10
5
0.69
0.73
0.77
0.81
LED Forward Current (mA)
0.95
10
5
Form-A
Typical Turn-On Time
vs. LED Forward Current
(IL=100mA)
0
20
40
60
Temperature (ºC)
80
600
400
Turn-Off Time (Ps)
2.0
1.5
1.0
0.5
-40
IF=5mA
-20
0
20
40
60
Temperature (ºC)
90
100
77.4
77.3
0
50
Form-A
Typical Turn-Off Time vs. Temperature
(IL=100mA)
80
IF=5mA
75
70
IF=2mA
65
60
55
80
77.5
77.1
10
20
30
40
LED Forward Current (mA)
85
IF=2mA
77.6
77.2
0
Form-A
Typical Turn-On Time vs. Temperature
(IL=100mA)
68.0
77.7
800
100
66.0
66.5
67.0
67.5
Blocking Voltage (VP)
Form-A
Typical Turn-Off Time
vs. LED Forward Current
(IL=100mA)
77.8
0
-20
5
65.5
200
0.70
-40
10
0.211
Turn-Off Time (Ps)
Turn-On Time (Ps)
0.75
15
0
0.207 0.208 0.209 0.210
On-Resistance (:)
1000
0.80
0.102
20
15
1200
0.85
0.082 0.087 0.092 0.097
Turn-Off Time (ms)
Form-A
Typical Blocking Voltage
(N=50)
20
0.206
0.90
5
0.077
Form-A
Typical On-Resistance
(N=50, IF=5mA, IL=1A)
0.85
Form-A
Typical IF for Switch Operation
vs. Temperature
(IL=200mA)
10
0.77
0
0.65
15
0
0.61
0.65
0.69
0.73
Turn-On Time (ms)
25
Device Count (N)
Device Count (N)
5
0.57
0
LED Current (mA)
10
1.225 1.230 1.235 1.240 1.245
LED Forward Voltage Drop (V)
Form-A
Typical IF for Switch Operation
(N=50, IL=200mA)
20
Turn-On Time (ms)
15
Device Count (N)
1.220
2.5
20
0
0
Form-A
Typical Turn-Off Time
(N=50, IF=5mA, IL=100mA)
20
Device Count (N)
Device Count (N)
Device Count (N)
25
20
Form-A
Typical Turn-On Time
(N=50, IF=5mA, IL=100mA)
50
-40
-20
0
20
40
60
Temperature (ºC)
0.26
AC On-Resistance (:)
30
Form-A
Typical LED Forward Voltage Drop
(N=50, IF=5mA)
80
100
10
20
30
40
LED Forward Current (mA)
50
Form-A
Typical On-Resistance (AC)
vs. Temperature
(IL=500mA, IF=5mA)
0.24
0.22
0.20
0.18
0.16
0.14
0.12
-40
-20
0
20
40
60
Temperature (ºC)
80
100
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
R03
www.ixysic.com
3
INTEGRATED CIRCUITS DIVISION
LBA716
Form-A RELAY PERFORMANCE DATA @25ºC (Unless Otherwise Noted)*
1.0
Form-A
Maximum Load Current vs. Temperature
(IF=5mA)
Form-A
Typical Load Current vs. Load Voltage
(IF=5mA)
-0.5
Blocking Voltage (VP)
Load Current (A)
Current (A)
0.0
0.8
0.6
0.4
0.2
0.0
-1.0
-0.20 -0.15 -0.10 -0.05 0.00 0.05 0.10 0.15 0.20
Voltage (V)
-40
-20
0
20
40
60
Temperature (ºC)
Form-A
Typical Leakage vs. Temperature
Measured Across Pins 5 & 6
(VL=60V)
80
69
68
67
66
65
64
63
62
-40
100
-20
0
20
40
60
Temperature (ºC)
80
100
Form-A
Energy Rating Curve
6
5
15
Load Current (A)
Leakage Current (nA)
20
70
1.2
1.0
0.5
Form-A
Typical Blocking Voltage
vs. Temperature
10
5
4
3
2
1
0
-40
-20
0
20
40
60
Temperature (ºC)
80
100
0
10Ps 100Ps 1ms 10ms 100ms
Time
1s
10s
100s
Form-B RELAY PERFORMANCE DATA @25ºC (Unless Otherwise Noted)*
30
Form-B
Typical LED Forward Voltage Drop
(N=50, IF=5mA)
Form-B
Typical Turn-On Time
(N=50, IF=5mA, IL=100mA)
20
25
15
10
Device Count (N)
Device Count (N)
Device Count (N)
25
20
15
10
5
5
Form-B
Typical IF for Switch Operation
(N=50, IL=200mA)
20
15
10
5
0
0.16
0.17
0.18
0.19
0.20
LED Forward Current (mA)
0.21
0.530 0.553 0.576 0.599
Turn-On Time (ms)
15
10
5
0.63
0.622
Form-B
Typical On-Resistance
(N=50, IF=0mA, IL=5mA)
20
Device Count (N)
Device Count (N)
25
0.507
1.225 1.230 1.235 1.240 1.245
LED Forward Voltage Drop (V)
15
10
5
0
0.67
0.71
0.75
0.79
Turn-Off Time (ms)
0.83
Form-B
Typical Blocking Voltage
(N=50, IF=5mA)
20
Device Count (N)
1.220
20
0
0
0
Form-B
Typical Turn-Off Time
(N=50, IF=5mA, IL=100mA)
15
10
5
0
1.49
1.53
1.57
1.61
1.65
On-Resistance (:)
1.69
75
76
77
78
79
Blocking Voltage (VP)
80
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
4
www.ixysic.com
R03
INTEGRATED CIRCUITS DIVISION
LBA716
Form-B RELAY PERFORMANCE DATA @25ºC (Unless Otherwise Noted)*
Form-B
Typical IF for Switch Operation
vs. Temperature
(IL=100mA)
0.40
423
0.25
0.20
0.15
-20
800
0
20
40
60
80
420
419
Temperature (ºC)
10
20
30
40
LED Forward Current (mA)
Form-B
Typical Turn-On Time
vs. Temperature
(IL=100mA)
Form-B
Typical Turn-Off Time
vs. Temperature
(IL=100mA)
0
4.5
400
IF=2mA
300
IF=5mA
200
IF=2mA
3.0
2.5
2.0
1.5
IF=5mA
20
40
60
Temperature (ºC)
80
100
-40
Form-B
Typical Load Voltage vs. Load Current
(IF=0mA)
-20
0
20
40
60
Temperature (ºC)
80
Load Current (A)
0.0
-0.2
0.4
0.3
0.2
-0.4
0.1
-0.6
-1.0 -0.8 -0.5 -0.3 0.0 0.3
Voltage (V)
0.0
0.8
1.0
-40
-20
0
20
40
60
Temperature (ºC)
Form-B
Typical Leakage vs.Temperature
Measured Across Pins 7&8
(IF=5mA, VL=60V)
50
1.5
1.4
1.3
-20
80
100
0
20
40
60
Temperature (ºC)
80
100
Form-B
Typical Blocking Voltage
vs. Temperature
(IF=5mA)
92
90
88
86
84
82
80
-40
-20
0
20
40
60
Temperature (ºC)
80
100
1.5
300
1.3
250
200
150
100
1.1
0.9
0.7
0.5
50
0
-40
40
Form-B
Energy Rating Curve
Load Current (A)
Leakage Current (nA)
350
0.5
30
1.6
94
0.5
0.2
20
Form-B
Typical On-Resistance vs. Temperature
(IF=0mA, IL=100mA)
1.1
-40
100
Form-B
Maximum Load Current
vs. Temperature
(IF=0mA)
0.6
0.4
10
1.2
Blocking Voltage (VP)
0
0
1.7
0.5
-20
0.5
1.8
3.5
1.0
100
-40
1.0
LED Forward Current (ma)
On-Resistance (:)
Turn-Off Time (ms)
500
1.5
50
4.0
600
2.0
0
417
100
700
Turn-On Time (Ps)
421
418
0.10
-40
Current (A)
Turn-Off Time (ms)
0.30
Form-B
Typical Turn-Off Time
vs. LED Forward Current
(IL=100mA)
2.5
422
Turn-On Time (Ps)
LED Current (mA)
0.35
0.6
Form-B
Typical Turn-On Time
vs. LED Forward Current
(IL=100mA)
-20
0
20
40
60
Temperature (ºC)
80
100
0.3
10Ps 100Ps 1ms 10ms 100ms
Time
1s
10s
100s
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
R03
www.ixysic.com
5
INTEGRATED CIRCUITS DIVISION
LBA716
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device
Moisture Sensitivity Level (MSL) Rating
LBA716 / LBA716S
MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device
Maximum Temperature x Time
LBA716 / LBA716S
250ºC for 30 seconds
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as
an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary
if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used.
Cleaning methods that employ ultrasonic energy should not be used.
Pb
6
e3
www.ixysic.com
R03
INTEGRATED CIRCUITS DIVISION
LBA716
Mechanical Dimensions
LBA716
2.540 ± 0.127
(0.100 ± 0.005)
9.652 ± 0.381
(0.380 ± 0.015)
8-0.800 DIA.
(8-0.031 DIA.)
2.540 ± 0.127
(0.100 ± 0.005)
9.144 ± 0.508
(0.360 ± 0.020)
6.350 ± 0.127
(0.250 ± 0.005)
Pin 1
PCB Hole Pattern
7.620 ± 0.254
(0.300 ± 0.010)
6.350 ± 0.127
(0.250 ± 0.005)
0.457 ± 0.076
(0.018 ± 0.003)
3.302 ± 0.051
(0.130 ± 0.002)
7.620 ± 0.127
(0.300 ± 0.005)
7.239 TYP.
(0.285)
4.064 TYP
(0.160)
0.254 ± 0.0127
(0.010 ± 0.0005)
7.620 ± 0.127
(0.300 ± 0.005)
Dimensions
mm
(inches)
0.813 ± 0.102
(0.032 ± 0.004)
LBA716S
9.652 ± 0.381
(0.380 ± 0.015)
2.540 ± 0.127
(0.100 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
Pin 1
0.635 ± 0.127
(0.025 ± 0.005)
3.302 ± 0.051
(0.130 ± 0.002)
9.525 ± 0.254
(0.375 ± 0.010)
0.457 ± 0.076
(0.018 ± 0.003)
PCB Land Pattern
2.54
(0.10)
8.90
(0.3503)
1.65
(0.0649)
7.620 ± 0.254
(0.300 ± 0.010)
0.254 ± 0.0127
(0.010 ± 0.0005)
0.65
(0.0255)
4.445 ± 0.127
(0.175 ± 0.005)
Dimensions
mm
(inches)
0.813 ± 0.102
(0.032 ± 0.004)
R03
www.ixysic.com
7
INTEGRATED CIRCUITS DIVISION
LBA716
LBA716STR Tape & Reel
330.2 DIA.
(13.00 DIA.)
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
K0 =4.90
(0.193)
K1 =4.20
(0.165)
Embossed Carrier
Embossment
W=16.00
(0.63)
Bo=10.30
(0.406)
Ao=10.30
(0.406)
P=12.00
(0.472)
User Direction of Feed
Dimensions
mm
(inches)
NOTES:
1. Dimensions carry tolerances of EIA Standard 481-2
2. Tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2
For additional information please visit our website at: www.ixysic.com
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to
its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
8
Specification: DS-LBA716-R03
©Copyright 2012, IXYS Integrated Circuits Division
OptoMOS® is a registered trademark of IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
12/22/2012
Similar pages