TM FQB5N50C/FQI5N50C 500V N-Channel MOSFET General Description Features These N-Channel enhancement mode power field effect transistors are produced using Fairchild’s proprietary, planar stripe, DMOS technology. This advanced technology has been especially tailored to minimize on-state resistance, provide superior switching performance, and withstand high energy pulse in the avalanche and commutation mode. These devices are well suited for high efficiency switched mode power supplies, active power factor correction, electronic lamp ballasts based on half bridge topology. • • • • • • 5A, 500V, RDS(on) = 1.4 Ω @VGS = 10 V Low gate charge ( typical 18nC) Low Crss ( typical 15pF) Fast switching 100% avalanche tested Improved dv/dt capability D ! D " G S FQB Series G D S ! " " " G! I2-PAK D2-PAK FQI Series ! S Absolute Maximum Ratings Symbol VDSS ID TC = 25°C unless otherwise noted Parameter Drain-Source Voltage - Continuous (TC = 25°C) Drain Current FQB5N50C/FQI5N50C 500 Units V 5 A - Continuous (TC = 100°C) IDM Drain Current - Pulsed (Note 1) 2.9 A 20 A ± 30 V 300 mJ VGSS Gate-Source Voltage EAS Single Pulsed Avalanche Energy (Note 2) IAR Avalanche Current (Note 1) 5 A EAR Repetitive Avalanche Energy Peak Diode Recovery dv/dt Power Dissipation (TC = 25°C) (Note 1) 7.3 4.5 73 0.58 -55 to +150 mJ V/ns W W/°C °C 300 °C dv/dt PD TJ, TSTG TL (Note 3) - Derate above 25°C Operating and Storage Temperature Range Maximum lead temperature for soldering purposes, 1/8" from case for 5 seconds Thermal Characteristics Symbol RθJC Parameter Thermal Resistance, Junction-to-Case RθJA Thermal Resistance, Junction-to-Ambient * -- 40 °C/W RθJA Thermal Resistance, Junction-to-Ambient -- 62.5 °C/W ©2003 Fairchild Semiconductor Corporation Typ -- Max 1.71 Units °C/W Rev. A, August 2003 FQB5N50C/FQI5N50C QFET Symbol TC = 25°C unless otherwise noted Parameter Test Conditions Min Typ Max Units 500 -- -- V -- 0.5 -- V/°C Off Characteristics BVDSS Drain-Source Breakdown Voltage VGS = 0 V, ID = 250 µA ∆BVDSS / ∆TJ Breakdown Voltage Temperature Coefficient ID = 250 µA, Referenced to 25°C IDSS IGSSF IGSSR VDS = 500 V, VGS = 0 V -- -- 1 µA VDS = 400 V, TC = 125°C -- -- 10 µA Gate-Body Leakage Current, Forward VGS = 30 V, VDS = 0 V -- -- 100 nA Gate-Body Leakage Current, Reverse VGS = -30 V, VDS = 0 V -- -- -100 nA 2.0 -- 4.0 V -- 1.14 1.4 Ω -- 5.2 -- S -- 480 625 pF -- 80 105 pF -- 15 20 pF -- 12 35 ns -- 46 100 ns -- 50 110 ns -- 48 105 ns -- 18 24 nC Zero Gate Voltage Drain Current On Characteristics VGS(th) Gate Threshold Voltage VDS = VGS, ID = 250 µA RDS(on) Static Drain-Source On-Resistance VGS = 10 V, ID = 2.5A gFS Forward Transconductance VDS = 40 V, ID = 2.5A (Note 4) Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance VDS = 25 V, VGS = 0 V, f = 1.0 MHz Switching Characteristics td(on) Turn-On Delay Time tr Turn-On Rise Time td(off) Turn-Off Delay Time tf Turn-Off Fall Time Qg Total Gate Charge Qgs Gate-Source Charge Qgd Gate-Drain Charge VDD = 250 V, ID = 5A, RG = 25 Ω (Note 4, 5) VDS = 400 V, ID = 5A, VGS = 10 V (Note 4, 5) -- 2.2 -- nC -- 9.7 -- nC Drain-Source Diode Characteristics and Maximum Ratings IS Maximum Continuous Drain-Source Diode Forward Current -- -- 5 A ISM -- -- 20 A VSD Maximum Pulsed Drain-Source Diode Forward Current VGS = 0 V, IS = 5 A Drain-Source Diode Forward Voltage -- -- 1.4 V trr Reverse Recovery Time -- 263 -- ns Qrr Reverse Recovery Charge -- 1.9 -- µC VGS = 0 V, IS = 5 A, dIF / dt = 100 A/µs (Note 4) Notes: 1. Repetitive Rating : Pulse width limited by maximum junction temperature 2. L = 21.5 mH, IAS = 5A, VDD = 50V, RG = 25 Ω, Starting TJ = 25°C 3. ISD ≤ 5A, di/dt ≤ 200A/µs, VDD ≤ BVDSS, Starting TJ = 25°C 4. Pulse Test : Pulse width ≤ 300µs, Duty cycle ≤ 2% 5. Essentially independent of operating temperature ©2003 Fairchild Semiconductor Corporation Rev. A, August 2003 FQB5N50C/FQI5N50C Electrical Characteristics FQB5N50C/FQI5N50C Typical Characteristics VGS 15.0 V 10.0 V 8.0 V 7.0 V 6.5 V 6.0 V 5.5 V Bottom : 5.0 V Top : ID, Drain Current [A] 10 1 10 ID, Drain Current [A] 1 0 10 o 150 C o 25 C o 0 -55 C 10 ※ Notes : 1. VDS = 40V 2. 250μ s Pulse Test ※ Notes : 1. 250μ s Pulse Test 2. TC = 25℃ -1 10 -1 10 -1 0 10 2 1 10 10 4 6 8 10 VGS, Gate-Source Voltage [V] VDS, Drain-Source Voltage [V] Figure 1. On-Region Characteristics Figure 2. Transfer Characteristics 4.5 1 10 3.5 IDR, Reverse Drain Current [A] VGS = 10V 3.0 2.5 2.0 VGS = 20V 1.5 1.0 150℃ ※ Notes : 1. VGS = 0V 2. 250μ s Pulse Test 25℃ ※ Note : TJ = 25℃ -1 0.5 0 5 10 15 10 0.2 0.4 0.6 0.8 1.0 1.2 1.4 ID, Drain Current [A] VSD, Source-Drain voltage [V] Figure 3. On-Resistance Variation vs Drain Current and Gate Voltage Figure 4. Body Diode Forward Voltage Variation with Source Current and Temperature 1200 Ciss = Cgs + Cgd (Cds = shorted) Coss = Cds + Cgd Crss = Cgd 1000 12 10 800 Capacitance [pF] 0 10 Ciss Coss 600 400 ※ Notes ; 1. VGS = 0 V 2. f = 1 MHz Crss 200 VGS, Gate-Source Voltage [V] RDS(ON) [Ω ], Drain-Source On-Resistance 4.0 VDS = 100V VDS = 250V 8 VDS = 400V 6 4 2 ※ Note : ID = 5A 0 0 -1 10 0 10 1 10 0 5 10 15 20 VDS, Drain-Source Voltage [V] QG, Total Gate Charge [nC] Figure 5. Capacitance Characteristics Figure 6. Gate Charge Characteristics ©2003 Fairchild Semiconductor Corporation Rev. A, August 2003 FQB5N50C/FQI5N50C Typical Characteristics (Continued) 1.2 3.0 BV DSS , (Normalized) Drain-Source Breakdown Voltage 2.5 RDS(ON) , (Normalized) Drain-Source On-Resistance 1.1 1.0 ※ Notes : 1. VGS = 0 V 2. ID = 250 μ A 0.9 0.8 -100 -50 0 50 100 2.0 1.5 1.0 ※ Notes : 1. VGS = 10 V 2. ID = 2.5 A 0.5 150 0.0 -100 200 -50 0 100 150 TJ, Junction Temperature [ C] TJ, Junction Temperature [ C] Figure 7. Breakdown Voltage Variation vs Temperature Figure 8. On-Resistance Variation vs Temperature 2 200 6 10 Operation in This Area is Limited by R DS(on) 10 µs 1 10 1 ms 10 ms 5 100 µs 4 ID, Drain Current [A] ID, Drain Current [A] 50 o o 100 ms 0 10 DC 3 2 -1 ※ Notes : 10 o 1. TC = 25 C 1 o 2. TJ = 150 C 3. Single Pulse -2 10 0 1 10 2 10 0 25 3 10 10 50 75 100 125 TC, Case Temperature [℃] Figure 9. Maximum Safe Operating Area Figure 10. Maximum Drain Current vs Case Temperature 10 150 0 D = 0 .5 0 .2 0 .1 10 ※ N o te s : 1 . Z θ J C (t) = 1 .7 1 ℃ /W M a x . 2 . D u ty F a c to r, D = t 1 /t 2 3 . T J M - T C = P D M * Z θ J C (t) 0 .0 5 -1 0 .0 2 0 .0 1 θ JC (t), T h e rm a l R e s p o n s e VDS, Drain-Source Voltage [V] PDM Z s in g le p u ls e t1 t2 10 -2 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 t 1 , S q u a re W a v e P u ls e D u ra tio n [s e c ] Figure 11. Transient Thermal Response Curve ©2003 Fairchild Semiconductor Corporation Rev. A, August 2003 FQB5N50C/FQI5N50C Gate Charge Test Circuit & Waveform VGS Same Type as DUT 50KΩ Qg 200nF 12V 10V 300nF VDS VGS Qgs Qgd DUT 3mA Charge Resistive Switching Test Circuit & Waveforms VDS RL VDS 90% VDD VGS RG VGS DUT 10V 10% td(on) tr td(off) t on tf t off Unclamped Inductive Switching Test Circuit & Waveforms BVDSS 1 EAS = ---- L IAS2 -------------------2 BVDSS - VDD L VDS BVDSS IAS ID RG VDD DUT 10V tp ©2003 Fairchild Semiconductor Corporation ID (t) VDS (t) VDD tp Time Rev. A, August 2003 FQB5N50C/FQI5N50C Peak Diode Recovery dv/dt Test Circuit & Waveforms DUT + VDS _ I SD L Driver RG VGS VGS ( Driver ) Same Type as DUT VDD • dv/dt controlled by RG • ISD controlled by pulse period Gate Pulse Width D = -------------------------Gate Pulse Period 10V IFM , Body Diode Forward Current I SD ( DUT ) di/dt IRM Body Diode Reverse Current VDS ( DUT ) Body Diode Recovery dv/dt VSD VDD Body Diode Forward Voltage Drop ©2003 Fairchild Semiconductor Corporation Rev. A, August 2003 FQB5N50C/FQI5N50C Package Dimensions 4.50 ±0.20 9.90 ±0.20 +0.10 2.00 ±0.10 2.54 TYP (0.75) ° ~3 0° 0.80 ±0.10 1.27 ±0.10 2.54 ±0.30 15.30 ±0.30 0.10 ±0.15 2.40 ±0.20 4.90 ±0.20 1.40 ±0.20 9.20 ±0.20 1.30 –0.05 1.20 ±0.20 (0.40) D2PAK +0.10 0.50 –0.05 2.54 TYP 9.20 ±0.20 (2XR0.45) 4.90 ±0.20 15.30 ±0.30 10.00 ±0.20 (7.20) (1.75) 10.00 ±0.20 (8.00) (4.40) 0.80 ±0.10 Dimensions in Millimeters ©2003 Fairchild Semiconductor Corporation Rev. A, August 2003 (Continued) I2PAK 4.50 ±0.20 (0.40) 9.90 ±0.20 +0.10 MAX13.40 9.20 ±0.20 (1.46) 1.20 ±0.20 1.30 –0.05 0.80 ±0.10 2.54 TYP 2.54 TYP 10.08 ±0.20 1.47 ±0.10 MAX 3.00 (0.94) 13.08 ±0.20 ) 5° (4 1.27 ±0.10 +0.10 0.50 –0.05 2.40 ±0.20 10.00 ±0.20 Dimensions in Millimeters ©2003 Fairchild Semiconductor Corporation Rev. A, August 2003 FQB5N50C/FQI5N50C Package Dimensions TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FACT Quiet Series™ ActiveArray™ FAST Bottomless™ FASTr™ CoolFET™ FRFET™ CROSSVOLT™ GlobalOptoisolator™ DOME™ GTO™ EcoSPARK™ HiSeC™ E2CMOSTM I2C™ TM EnSigna ImpliedDisconnect™ FACT™ ISOPLANAR™ Across the board. Around the world.™ The Power Franchise™ Programmable Active Droop™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerTrench QFET QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ SILENT SWITCHER SMART START™ SPM™ Stealth™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic TINYOPTO™ TruTranslation™ UHC™ UltraFET VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I5