AZ169 MINIATURE POWER RELAY FEATURES • • • • • • 10 A switching DPDT or 3PDT arrangement High switching capacity AC and DC coils Push To Test lever UL, CUR file E44211 CONTACTS GENERAL DATA Arrangement DPDT (2 Form C) 3PDT (3 Form C) Ratings Resistive load: Max. switched power: 300 W or 2500 VA Max. switched current: 10 A Max. switched voltage: 30 VDC* or 250 VAC Life Expectancy Mechanical Electrical Minimum operations 1 x 107 operations 1 x 105 operations Operate Time 25 ms max. at nominal coil voltage Release Time 25 ms max. at nominal coil voltage (without suppression) * Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. UL, CUR 10A at 250 VAC 30VDC 1/3 HP at 240 VAC 1/3 HP at 120 VAC 1/2 HP at 277 VAC Material Silver tin oxide or silver cadmium oxide, gold plated versions are available Resistance < 100 milliohms initially COIL Dielectric Strength 2500 Vrms coil to contact (at sea level for 1 min.) 2000 Vrms between contact sets Insulation Resistance 500 megohms min. at 500 VDC, 20°C, 50% RH Insulation (according to DIN VDE 0110, IEC 60664-1) C250 Overvoltage category: III Pollution degree: 3 Nominal voltage: 250 VAC Dropout DC coils AC coils Greater than 10% of nominal coil voltage Greater than 30% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage -40°C (-40°F) to 70°C (158°F) - DC coils -40°C (-40°F) to 55°C (131°F) - AC coils -40°C (-40°F) to 105°C (221°F) Storage Power At Pickup Voltage (typical) DC: 1.0 W AC: 2.0 VA Max. Continuous Dissipation DC: 2.2 W at 20°C (68°F) AC: 3.5 VA at 20°C (68°F) 105°C (221°F) Temperature NOTES Vibration 0.062" (1.5 mm) DA at 10–55 Hz Shock 10 g Enclosure Polycarbonate Terminals Octal or Undecal Type Plug Weight 85 grams Packing unit in pcs 10 per small carton / 100 per carton box 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2006-02-03 AZ169 RELAY ORDERING DATA COIL SPECIFICATIONS: Nominal Coil VDC 6 DC Coil Coil Resistance Ohm ± 10% 23.5 ORDER NUMBER* Must Operate VDC 4.8 Max. Continuous VDC 7.2 Nominal Current mA ± 10% 255.3 12 9.6 14.4 126.3 95 AZ169–2C–12D 24 19.2 28.8 55.8 430 AZ169–2C–24D 48 38.4 57.6 36.9 1,630 AZ169–2C–48D 60 48.0 72.0 31.3 1,920 AZ169–2C–60D 100 80.0 120.0 14.7 6,800 AZ169–2C–100D 110 88.0 132.0 15.1 7,300 AZ169–2C–110D AZ169–2C–6D COIL SPECIFICATIONS AC Coil (50/60 Hz) Nominal Coil VAC 6 Must Operate VAC 4.8 Max. Continuous VAC 7.2 Nominal Current mA ± 10% 450.0 12 9.6 14.4 225.0 24 19.2 28.8 48 38.4 57.6 120 88.0 230 176.0 Coil Resistance Ohm ± 10% 3.9 ORDER NUMBER* AZ169–2C–6A 16.3 AZ169–2C–12A 112.5 70 AZ169–2C–24A 56.3 315 132.0 22.5 1,600 AZ169–2C–120A 264.0 11.7 6,800 AZ169–2C–230A AZ169–2C–48A * For 3PDT substitute “-3C” for “-2C”. Add suffix “E” to “-2C” or “-3C” to indicate silver tin oxide contacts. Add suffix “1” for LED at the end of part number. Add suffix “P” for “Push to Test” lever at the end of part number. Add sufffix “A” for gold plated contacts at the end of part number. MECHANICAL DATA WIRING DIAGRAMS 2 Form C 3 Form C 2 Form C 2 Form C (with LED) 3 Form C 3 Form C (with LED) Dimensions in mm. ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2006-02-03