Elektronische Bauelemente DTC114WE/DTC114WUA/DTC114WKA DTC114WCA/TC114WSA NPN Digital Transistors (Built-in Resistors) FEATURES * Built-in bias resistors enable the configuration of an inverter circuit without connecting input resistors (see equivalent circuit). * Only the on/off confitions need to be set for operation, making device design easy. * The bias resistors consis of thin-film resistors with compete isolation to allow negative biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. PIN CONNENCTIONS AND MARKING DTC114WUA DTC114WE SOT-523 Abbreviated symbol: 84 SOT-323 Abbreviated symbol: 84 DTA114ECA DTC114WCA DTC114WKA SOT-23 SOT-23-3L Abbreviated symbol: 84 SOT-23 Abbreviated symbol: 84 DTC114WSA TO-92S http://www.SeCoSGmbH.com 01-Jun-2002 Rev. A l Any changing of specification will not be informed individua Page 1 of 2 DTC114WE/DTC114WUA/DTC114WKA DTC114WCA/TC114WSA Elektronische Bauelemente NPN Digital Transistors (Built-in Resistors) Absolute maximum ratings (Ta=25℃) Limits (DTC114W ) Parameter Symbol Supply voltage VCC 50 V Input voltage VIN -10~30 V IO 100 IC(MAX) 100 Output current E UA CA 150 KA SA Unit mA Power dissipation Pd 200 300 mW Junction temperature Tj 150 ℃ Storage temperature Tstg -55~150 ℃ Electrical characteristics (Ta=25℃) Parameter Input voltage Symbol Min. Typ VI(off) VI(on) Max. 0.8 3 V Conditions VCC=5V ,IO=100µA VO=0.3V ,IO=2 mA 0.3 V IO/II=10mA/0.5mA II 0.88 mA VI=5V Output current IO(off) 0.5 µA VCC=50V, VI=0 DC current gain GI 24 Input resistance R1 7 10 13 Resistance ratio R2/R1 0.37 0.47 0.57 Transition frequency fT Output voltage VO(on) Input current http://www.SeCoSGmbH.com 01-Jun-2002 Rev. A 0.1 Unit VO=5V, IO=10mA 250 KΩ MHz VO=10V, IO=5mA, f=100MHz Any changing of specification will not be informed individua Page 2 of 2