Vishay BZX384C75 Small signal zener diode Datasheet

BZX384-Series
www.vishay.com
Vishay Semiconductors
Small Signal Zener Diodes
FEATURES
• Silicon planar Zener diodes
• The Zener voltages are graded according to the
international E24 standard
• Standard Zener voltage tolerance is ± 5 %;
replace “C” with “B” for ± 2 % tolerance
• AEC-Q101 qualified
• ESD capability according to AEC-Q101:
Human body model > 8 kV
Machine model > 800 V
PRIMARY CHARACTERISTICS
PARAMETER
VALUE
UNIT
VZ range nom.
2.4 to 75
V
Test current IZT
2; 5
mA
VZ specification
Pulse current
Int. construction
Single
• Base P/N-E3 - RoHS-compliant, commercial grade
• Base P/N-HE3 - RoHS-compliant, AEC-Q101 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
ORDERING INFORMATION
DEVICE NAME
ORDERING CODE
TAPED UNITS PER REEL
MINIMUM ORDER QUANTITY
3000 (8 mm tape on 7" reel)
15 000/box
10 000 (8 mm tape on 13" reel)
10 000/box
BZX384C2V4-E3-08 to BZX384C75-E3-08
BZX384B2V4-E3-08 to BZX384B75-E3-08
BZX384C2V4-HE3-08 to BZX384C75-HE3-08
BZX384-series
BZX384B2V4-HE3-08 to BZX384B75-HE3-08
BZX384C2V4-E3-18 to BZX384C75-E3-18
BZX384B2V4-E3-18 to BZX384B75-E3-18
BZX384C2V4-HE3-18 to BZX384C75-HE3-18
BZX384B2V4-HE3-18 to BZX384B75-HE3-18
PACKAGE
PACKAGE NAME
SOD-323
WEIGHT
MOLDING COMPOUND
FLAMMABILITY RATING
MOISTURE SENSITIVITY
LEVEL
SOLDERING CONDITIONS
4.3 mg
UL 94 V-0
MSL level 1
(according J-STD-020)
260 °C/10 s at terminals
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
Power dissipation
TEST CONDITION
Device on fiberglass substrate
Thermal resistance junction to ambient air Valid that electrodes are kept at ambient temperature
SYMBOL
VALUE
UNIT
Ptot
200
mW
RthJA
650
K/W
Tj
150
°C
Storage temperature range
Tstg
- 65 to + 150
°C
Operating temperature range
Top
- 55 to + 150
°C
Junction temperature
Rev. 1.9, 08-May-13
Document Number: 85764
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BZX384-Series
www.vishay.com
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
ZENER VOLTAGE
RANGE
PART NUMBER
MARKING
CODE
VZ at IZT1
REVERSE
LAEKAGE
CURRENT
TEST
CURRENT
IZT1
V
IZT2
mA
IR at VR
μA
MIN. NOM. MAX.
DYNAMIC
RESISTANCE
ZZ at IZT1
VZ at IZT1

V
MAX.
ZZK at IZT2
TEMPERATURE
COEFFICIENT OF
ZENER VOLTAGE
10-4/°C
TYP.
TYP.
MIN.
MAX.
BZX384C2V4
W1
2.2
2.4
2.6
5
1
50
1
70 ( 100)
275
- 9
- 4
BZX384C2V7
W2
2.5
2.7
2.9
5
1
20
1
75 ( 100)
300 ( 600)
-9
-4
BZX384C3V0
W3
2.8
3.0
3.2
5
1
10
1
80 ( 95)
325 ( 600)
-9
-3
BZX384C3V3
W4
3.1
3.3
3.5
5
1
5
1
85 ( 95)
350 ( 600)
-8
-3
BZX384C3V6
W5
3.4
3.6
3.8
5
1
5
1
85 ( 90)
375 ( 600)
-8
-3
BZX384C3V9
W6
3.7
3.9
4.1
5
1
3
1
85 ( 90)
400 ( 600)
-7
-3
BZX384C4V3
W7
4
4.3
4.6
5
1
3
1
80 ( 90)
410 ( 600)
-6
-1
BZX384C4V7
W8
4.4
4.7
5
5
1
3
2
50 ( 80)
425 ( 500)
-5
2
BZX384C5V1
W9
4.8
5.1
5.4
5
1
2
2
40 ( 60)
400 ( 480)
-3
4
BZX384C5V6
WA
5.2
5.6
6
5
1
1
2
15 ( 40)
80 ( 400)
-2
6
BZX384C6V2
WB
5.8
6.2
6.6
5
1
3
4
6 ( 10)
40 ( 150)
-1
7
BZX384C6V8
WC
6.4
6.8
7.2
5
1
2
4
6 ( 15)
30 ( 80)
2
7
BZX384C7V5
WD
7
7.5
7.9
5
1
1
5
6 ( 15)
30 ( 80)
3
7
BZX384C8V2
WE
7.7
8.2
8.7
5
1
0.7
5
6 ( 15)
40 ( 80)
4
7
BZX384C9V1
WF
8.5
9.1
9.6
5
1
0.5
6
6 ( 15)
40 ( 100)
5
8
BZX384C10
WG
9.4
10
10.6
5
1
0.2
7
8 ( 20)
50 ( 150)
5
8
BZX384C11
WH
10.4
11
11.6
5
1
0.1
8
10 ( 20)
50 ( 150)
5
9
BZX384C12
WI
11.4
12
12.7
5
1
0.1
8
10 ( 25)
50 ( 150)
6
9
BZX384C13
WK
12.4
13
14.1
5
1
0.1
8
10 ( 30)
50 ( 170)
7
9
BZX384C15
WL
13.8
15
15.6
5
1
0.05
0.7 VZnom.
10 ( 30)
50 ( 200)
7
9
BZX384C16
WM
15.3
16
17.1
5
1
0.05
0.7 VZnom.
10 ( 40)
50 ( 200)
8
9.5
BZX384C18
WN
16.8
18
19.1
5
1
0.05
0.7 VZnom.
10 ( 45)
50 ( 225)
8
9.5
BZX384C20
WO
18.8
20
21.2
5
1
0.05
0.7 VZnom.
15 ( 55)
60 ( 225)
8
10
BZX384C22
WP
20.8
22
23.3
5
1
0.05
0.7 VZnom.
20 ( 55)
60 ( 250)
8
10
BZX384C24
WR
22.8
24
25.6
5
1
0.05
0.7 VZnom.
25 ( 70)
60 ( 250)
8
10
BZX384C27
WS
25.1
27
28.9
2
0.5
0.05
0.7 VZnom.
25 ( 80)
65 ( 300)
8
10
BZX384C30
WT
28
30
32
2
0.5
0.05
0.7 VZnom.
30 ( 80)
70 ( 300)
8
10
BZX384C33
WU
31
33
35
2
0.5
0.05
0.7 VZnom.
35 ( 80)
75 ( 325)
8
10
BZX384C36
WW
34
36
38
2
0.5
0.05
0.7 VZnom.
35 ( 90)
80 ( 350)
8
10
BZX384C39
WX
37
39
41
2
0.5
0.05
0.7 VZnom.
40 ( 130)
80 ( 350)
10
12
BZX384C43
WY
40
43
46
2
0.5
0.05
0.7 VZnom.
45 ( 150)
85 ( 375)
10
12
BZX384C47
WZ
44
47
50
2
0.5
0.05
0.7 VZnom.
50 ( 170)
85 ( 375)
10
12
BZX384C51
X1
48
51
54
2
0.5
0.05
0.7 VZnom.
60 ( 180)
85 ( 400)
8
10
BZX384C56
X2
52
56
60
2
0.5
0.05
0.7 VZnom.
70 ( 200)
100 ( 425)
10
12
BZX384C62
X3
58
62
66
2
0.5
0.05
0.7 VZnom.
80 ( 215)
100 ( 450)
10
12
BZX384C68
X4
64
68
72
2
0.5
0.05
0.7 VZnom.
90 ( 240)
150 ( 475)
10
12
BZX384C75
X5
70
75
79
2
0.5
0.05
0.7 VZnom.
95 ( 255)
170 ( 500)
10
12
Rev. 1.9, 08-May-13
Document Number: 85764
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BZX384-Series
www.vishay.com
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
ZENER VOLTAGE
RANGE
PART NUMBER
MARKING
CODE
VZ at IZT1
TEST
CURRENT
IZT1
V
REVERSE
LEAKAGE
CURRENT
IZT2
mA
IR at VR
μA
DYNAMIC
RESISTANCE
ZZ at IZT1
VZ at IZT1

V
MAX.
ZZK at IZT2
TEMPERATURE
COEFFICIENT OF
ZENER VOLTAGE
10-4/°C
MIN.
NOM.
MAX.
TYP.
TYP.
MIN.
MAX.
BZX384B2V4
W1
2.35
2.4
2.45
5
1
50
1
70 ( 100)
275
-9
-4
BZX384B2V7
W2
2.65
2.7
2.75
5
1
20
1
75 ( 100)
300 ( 600)
-9
-3
BZX384B3V0
W3
2.94
3.0
3.06
5
1
10
1
80 ( 95)
325 ( 600)
-8
-3
BZX384B3V3
W4
3.23
3.3
3.37
5
1
5
1
85 ( 95)
350 ( 600)
-8
-3
BZX384B3V6
W5
3.53
3.6
3.67
5
1
5
1
85 ( 90)
375 ( 600)
-7
-3
BZX384B3V9
W6
3.82
3.9
3.98
5
1
3
1
85 ( 90)
400 ( 600)
-6
-1
BZX384B4V3
W7
4.21
4.3
4.39
5
1
3
1
80 ( 90)
410 ( 600)
-5
2
BZX384B4V7
W8
4.61
4.7
4.79
5
1
3
2
50 ( 80)
425 ( 500)
-3
4
BZX384B5V1
W9
5
5.1
5.2
5
1
2
2
40 ( 60)
400 ( 480)
-2
6
BZX384B5V6
WA
5.49
5.6
5.71
5
1
1
2
15 ( 40)
80 ( 400)
-1
7
BZX384B6V2
WB
6.08
6.2
6.32
5
1
3
4
6 ( 10)
40 ( 150)
2
7
BZX384B6V8
WC
6.66
6.8
6.94
5
1
2
4
6 ( 15)
30 ( 80)
3
7
BZX384B7V5
WD
7.35
7.5
7.65
5
1
1
5
6 ( 15)
30 ( 80)
4
7
BZX384B8V2
WE
8.04
8.2
8.36
5
1
0.7
5
6 ( 15)
40 ( 80)
5
8
BZX384B9V1
WF
8.92
9.1
9.28
5
1
0.5
6
6 ( 15)
40 ( 100)
5
8
BZX384B10
WG
9.8
10
10.2
5
1
0.2
7
8 ( 20)
50 ( 150)
5
9
BZX384B11
WH
10.8
11
11.2
5
1
0.1
8
10 ( 20)
50 ( 150)
6
9
BZX384B12
WI
11.8
12
12.2
5
1
0.1
8
10 ( 25)
50 ( 150)
7
9
BZX384B13
WK
12.7
13
13.3
5
1
0.1
8
10 ( 30)
50 ( 170)
7
9
BZX384B15
WL
14.7
15
15.3
5
1
0.05
0.7 VZnom.
10 ( 30)
50 ( 200)
8
9.5
BZX384B16
WM
15.7
16
16.3
5
1
0.05
0.7 VZnom.
10 ( 40)
50 ( 200)
8
9.5
BZX384B18
WN
17.6
18
18.4
5
1
0.05
0.7 VZnom.
10 ( 45)
50 ( 225)
8
10
BZX384B20
WO
19.6
20
20.4
5
1
0.05
0.7 VZnom.
15 ( 55)
60 ( 225)
8
10
BZX384B22
WP
21.6
22
22.4
5
1
0.05
0.7 VZnom.
20 ( 55)
60 ( 250)
8
10
BZX384B24
WR
23.5
24
24.5
5
1
0.05
0.7 VZnom.
25 ( 70)
60 ( 250)
8
10
BZX384B27
WS
26.5
27
27.5
2
0.5
0.05
0.7 VZnom.
25 ( 80)
65 ( 300)
8
10
BZX384B30
WT
29.4
30
30.6
2
0.5
0.05
0.7 VZnom.
30 ( 80)
70 ( 300)
8
10
BZX384B33
WU
32.3
33
33.7
2
0.5
0.05
0.7 VZnom.
35 ( 80)
75 ( 325)
8
10
BZX384B36
WW
35.3
36
36.7
2
0.5
0.05
0.7 VZnom.
35 ( 90)
80 ( 350)
10
12
BZX384B39
WX
38.2
39
39.8
2
0.5
0.05
0.7 VZnom.
40 ( 130)
80 ( 350)
10
12
BZX384B43
WY
42.1
43
43.9
2
0.5
0.05
0.7 VZnom.
45 ( 150)
85 ( 375)
10
12
BZX384B47
WZ
46.1
47
47.9
2
0.5
0.05
0.7 VZnom.
50 ( 170)
85 ( 375)
10
12
BZX384B51
X1
50
51
52
2
0.5
0.05
0.7 VZnom.
60 ( 180)
85 ( 400)
10
12
BZX384B56
X2
54.9
56
57.1
2
0.5
0.05
0.7 VZnom.
70 ( 200)
100 ( 425)
10
12
BZX384B62
X3
60.8
62
63.2
2
0.5
0.05
0.7 VZnom.
80 ( 215)
100 ( 450)
10
12
BZX384B68
X4
66.6
68
69.4
2
0.5
0.05
0.7 VZnom.
90 ( 240)
150 ( 475)
10
12
BZX384B75
X5
73.5
75
76.5
2
0.5
0.05
0.7 VZnom.
95 ( 255)
170 ( 500)
10
12
Rev. 1.9, 08-May-13
Document Number: 85764
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BZX384-Series
www.vishay.com
Vishay Semiconductors
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Ω
100
mA
103
TJ = 25 °C
102
IF
5
4
10
1
3
rzj
TJ = 100 °C
33
2
27
22
10
10-1
18
TJ = 25 °C
10-2
15
5
4
-3
10
12
3
10
2
10-4
6.8/8.2
6.2
1
10-5
0
0.2
0.4
0.6
0.8
1V
VF
18114
0.1
2
1
5
2
5
18119
10
IZ
2
5
100 mA
Fig. 4 - Dynamic Resistance vs. Zener Current
Fig. 1 - Forward characteristics
mW
250
Ω
103
Tj = 25 °C
7
5
4
200
Rzj
Ptot
3
2
150
47 + 51
43
39
36
102
100
7
5
4
3
50
2
0
0
100
10
0.1
200 °C
Tamb
18192
Fig. 2 - Admissible Power Dissipation vs.
Ambient Temperature
3
4 5
2
3 4 5
IZ
Ω
103
TJ = 25 °C
5
4
3
2
1
10
mA
Fig. 5 - Dynamic Resistance vs. Zener Current
Ω
1000
rzj
2
18120
Rzth
Rzth = RthA x VZ x
5
4
3
2
Δ VZ
ΔTj
102
100
5
4
3
5
4
3
2
2
10
10
5
4
3
2.7
3.6
4.7
5.1
5
4
3
5.6
1
negative
2
positive
2
1
0.1
18117
2
5
1
2
5
10
2
5
100 mA
IZ
Fig. 3 - Dynamic Resistance vs. Zener Current
Rev. 1.9, 08-May-13
1
18121
2
3
4 5
10
2
3 4 5
100 V
VZ at IZ = 5 mA
Fig. 6 - Thermal Differential Resistance vs. Zener Voltage
Document Number: 85764
4
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BZX384-Series
www.vishay.com
Vishay Semiconductors
Ω
100
V
9
7
8
5
4
Rzj
VZ at IZ = 2 mA
7
3
Δ VZ
2
51
6
5
10
43
4
7
36
3
5
4
2
3
1
2
Tj = 25 °C
IZ = 5 mA
1
1
2
3
10
4 5
2
3 4 5
18122
0
IZ = 2 mA
-1
100 V
0
VZ
20
40
60
80 100 120
18194
Fig. 7 - Dynamic Resistance vs. Zener Voltage
140 °C
Tj
Fig. 10 - Change of Zener Voltage vs. Junction Temperature
mV/°C
25
mV/°C
100
IZ = 5 mA
Δ VZ
ΔTj
20
IZ =
15
Δ VZ
ΔTj
5 mA
1 mA
20 mA
80
60
10
5
40
0
20
-5
1
2
3
10
4 5
2
3 4 5
0
100 V
0
VZ at IZ = 5 mA
V ≥ 27 V, I = 2 mA
18135
Fig. 8 - Temperature Dependence of Zener Voltage vs.
Zener Voltage
25
0.7
VZ at IZ = 5 mA
V
1.6
15
1.2
0.5
8
0.4
Δ VZ
0.8
6.2
5.9
0.6
0.2
0.1
5.6
0.2
0
5.1
-1
3.6
- 0.2
0
18124
20
40
60
80
4.7
100 120 140 C
Tj
Fig. 9 - Change of Zener Voltage vs. Junction Temperature
Rev. 1.9, 08-May-13
100 V
1
7
0.3
80
VZ at IZ = 2 mA
Δ VZ = rzth x IZ
IZ = 5 mA
VZ ≥ 27 V; IZ = 2 mA
1.4
10
0.6
Δ VZ
60
40
Fig. 11 - Temperature Dependence of Zener Voltage vs.
Zener Voltage
V
0.8
20
18195
0.4
0
- 0.2
- 0.4
1
18196
2
3
4 5
10
2
3 4 5
100 V
VZ at IZ = 5 mA
Fig. 12 - Change of Zener Voltage from Turn-on up to the Point of
Thermal Equilibrium vs. Zener Voltage
Document Number: 85764
5
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BZX384-Series
www.vishay.com
V
5
Vishay Semiconductors
mA
10
ΔVZ = rzth x IZ
Tj = 25 °C
51
39
4
8
3
47
43
lz
Δ VZ
6
IZ = 5 mA
2
4
Test Current IZ
2 mA
1
2
IZ = 2.5 mA
0
0
0
20
40
60
100 V
80
VZ at IZ = 5 mA
18160
Fig. 13 - Change of Zener Voltage from Turn-on up to the Point of
Thermal Equilibrium vs. Zener Voltage
mA
50
Tj = 25 °C
0
18191
10
20
30
40
50
60
70
80
90
100 V
VZ
Fig. 16 - Breakdown Characteristics
3.9 5.6
2.7
6.8
3.3 4.7
40
lZ
8.2
30
20
Test
current
IZ 5 mA
10
0
0
1
2
3
4
5
6
7
8
9 10 V
VZ
18111
Fig. 14 - Breakdown Characteristics
mA
30
lZ
10
12
Tj = 25 °C
15
20
18
22
27
Test
10 current
IZ 5 mA
33 36
0
0
18112
10
20
30
40 V
VZ
Fig. 15 - Breakdown Characteristics
Rev. 1.9, 08-May-13
Document Number: 85764
6
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BZX384-Series
www.vishay.com
Vishay Semiconductors
0.1 (0.004) max.
0° to 8
°
0.15 (0.006)
0.10 (0.004)
0.2 (0.008)
0.8 (0.031)
1.15 (0.045)
PACKAGE DIMENSIONS in millimeters (inches): SOD-323
0.40 (0.016)
0.25 (0.010)
1.95 (0.077)
1.60 (0.063)
2.50 (0.098)
1.1 (0.043)
2.85 (0.112)
1.5 (0.059)
0.40 (0.016)
0.20 (0.008)
Cathode bar
Foot print recommendation:
Document no.:S8-V-3910.02-001 (4)
Created - Date: 24.August.2004
Rev. 5 - Date: 23.Sept.2009
17443
Rev. 1.9, 08-May-13
1.6 (0.063)
0.6 (0.024)
0.6 (0.024)
0.6 (0.024)
Document Number: 85764
7
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000