CLV0890A-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Broadcast Equipment • Mobile Radios • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 890 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -111 Harmonic Suppression (2nd) -20 Tuning Voltage 0.5 Tuning Sensitivity (avg.) Power Output Max Units 930 MHz dBc/Hz -18 dBc 4.5 Vdc MHz/V 25 -3.5 1 dBm 150 pF Pushing .6 MHz/V Pulling (12 dB Return Loss, Any Phase) .2 MHz 85 °C Max Units Load Impedance -1.25 50 Input Capacitance Operating Temperature Range -40 Package Style Power Supply Requirements Supply Voltage (Vcc, nom.) Supply Current (Icc) MINI-14S Min Typ 5 20 Vdc 24 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module CLV0890A-LF Rev A1 Tuning Curve, typ. 970 960 FREQUENCY (MHz) 950 940 930 85 °C 25 °C -40 °C 920 910 900 890 880 870 860 850 840 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 4 SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 3 2 1 0 0.030 MIN. CUTBACK FROM LIVE PADS -1 -2 -3 -4 -5 845 862 876 889 901 914 925 936 947 958 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B