MACOM DS52-0008 Low cost two-way gmic smt power divider 824 - 960 mhz Datasheet

DS52-0008
Low Cost Two-Way GMIC SMT Power Divider
824 - 960 MHz
Features
•
•
•
•
•
SOT-26
Small Size and Low Profile
Industry Standard SOT-26 SMT Plastic Package
Typical Isertion Loss: 0.6dB
Typical Isolation: 15dB
1 Watt Power Handling
Description
M/A-COM’s DS52-0008 is an IC-based monolithic power divider
using M/A-COM’s GMIC technology in a low cost SOT-26
plastic package. This 2-way power divider is ideally suited for
applications where small size, low insertion loss, superior phase/
amplitude tracking and low cost are required.
Typical
applications include personal communications systems and other
communication applications where size and PCB real estate are at
a premium. Available in Tape and Reel.
The DS52-0008 is fabricated using a passive-integrated circuit
process. The process features full-chip passivation for increased
performance and reliability.
Ordering Information
Part Number
Package
DS52-0008
SOT-26 Lead Plastic Package
DS52-0008-TR
Forward Tape and Reel1
DS52-0008-RTR
Reverse Tape and Reel1
1. If specific reel size is required, consult factory for part number
assignment.
Typical Electrical Specifications1, TA = +25°C
Units
Min
Typ
Max
Insertion Loss above 3.0dB
Parameter
dB
—
0.6
0.8
Isolation
dB
13
15
—
—
—
1.3 : 1
1.4 : 1
dB
—
0.1
0.25
Degrees
—
3.0
5.0
VSWR
RF Input
Amplitude Balance
Phase Balance
1. All specifications apply with a 50-Ohm source and load impedance.
V1.01
M/A-COM n North America: Tel. (800) 366-2266, Fax (800) 618-8883 n Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 n
Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
www.macom.com
Specifications subject to change without notice.
DS52-0008
Absolute Maximum Ratings1
Parameter
Recommended PCB Configuration
Absolute Maximum
Input Power2
1 W CW
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
1. Exceeding these limits may cause permanent damage.
2. With internal load dissipation of 0.125 W Maximum.
Functional Diagram
Typical Performance @ +25°C
Insertion Loss
Isolation
Insertion Loss vs. Frequency
0
-5
0
-10
Isolation dB
Insertion Loss dB
-0.25
-0.5
-15
-20
-25
-30
-0.75
-35
-1
824
858
892
926
-40
824
960
858
892
Frequency MHz
926
960
Frequency MHz
Phase Balance
VSWR
Phase Balance vs. Frequency
(Relative to RF1)
VSWR vs. Frequency
2
0
1.8
Input
Output
1.4
Phase, degrees
VSWR
-1
1.6
-2
-3
1.2
-4
1
824
858
892
926
960
Frequency MHz
-5
824
858
892
926
960
Frequency MHz
V1.01
M/A-COM n North America: Tel. (800) 366-2266, Fax (800) 618-8883 n Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 n
Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
www.macom.com
Specifications subject to change without notice.
Similar pages