D5100 Industrial Differential Pressure Transducer SPECIFICATIONS 316L Stainless Steel Wetted Surface Voltage, Current, and mV Outputs True Wet/Wet Differential CE Certified (amplified version only) Variety of Pressure Ports and Electrical Connections The D5100 series from Measurement Specialties sets the price and performance standard for differential pressure transducers used in demanding environments. The amplified model of the D5100 series exceeds the latest heavy industrial CE requirements including surge protection and reverse polarity protection. The amplified and mV output pressure transducers both have two pressure ports for high and low pressures and all wetted parts are made of 316L stainless steel. They come in a variety of electrical configurations and ranges from 1 to 500 psi (up to 35 Bar). SENSOR SOLUTIONS ///D5100 09/2015 Page 1 D5100 Industrial Differential Pressure Transducer FEATURES Heavy Industrial CE Approval (amplified only) As Low As ±0.1% Pressure Non Linearity Rugged Construction: Can Withstand 50g Shock/20g Vibration Up to -40°C to +125°C Operating Temperature Range Excellent Stability Various Output, Pressure Ports and Electrical Connections APPLICATIONS Process Controls Tank Level Measurement Filter Performance Monitoring Corrosive Fluids and Gas Measurement Systems Flow Measurements STANDARD RANGES Range 0 to 1 0 to 5 0 to 15 0 to 30 0 to 50 0 to 100 0 to 300 0 to 500 SENSOR SOLUTIONS ///D5100 psiD Range 0 to 0.07 0 to 0.35 0 to 1 0 to 2 0 to 3.5 0 to 7 0 to 20 0 to 35 09/2015 BarD Page 2 D5100 Industrial Differential Pressure Transducer PERFORMANCE SPECIFICATIONS (AMPLIFIED OUTPUT) Typical Drive: See Output Options Table Ambient Temperature: 25°C (unless otherwise specified) 1 PSI PARAMETERS MIN TYP Accuracy Isolation, Body To Any Lead Pressure Cycles -0.3 ≥5 PSI MAX 0.3 MIN TYP MAX 5psi: -0.25 0.25 ≥15psi: -0.1 0.1 UNITS NOTES %Span 1 MΩ @25VDC 1 1 1.00E+6 1.00E+6 0-FS Cycles Proof Pressure (High Side) 10X 3X Rated 2 Proof Pressure (Low Side) 10X 3X Rated 3 Burst Pressure (High Side) 12X 4X Rated 2 Burst Pressure (Low Side) 12X 4X Rated 3 Line (common) Pressure 1000 1000 psi Line Pressure Effect on Zero Long Term Stability Total Error Band Compensated Temperature 5psi: 0.0008 TYP 0.004 ±0.25 -1.5 %Span/psi ≥15psi: 0.0005 TYP ±0.1 1.5 %Span/year -1 1 0 70 -20 +85 %Span 0 50 -40 +85 -40 +125 °C 4 Storage Temperature -40 +125 -40 +125 ºC 4 Load Resistance (RL) RL > 100k Ω Sensor Type Differential Pressure Sensor with Unidirectional Calibration Pressure Port Material 316L Stainless Steel Bandwidth DC to 1KHz (typical) Shock 50g, 11 msec Half sine shock per MIL-STD-202F, Method 213B, Condition A Vibration ±20g, MIL-STD-810C, Procedure 514.2, Fig 514.2-2, Curve L Operating Temperature °C 5 Notes 1. Combined linearity, hysteresis and repeatability using Best Fit Straight Line. 2. 1000psi, whichever is less. 3. 150psi, whichever is less. 4. Except cable 105°C Max. 5. Voltage output. CE Compliance IEC 55022 Emissions Class A & B IEC 61000-4-2 Electrostatic Discharge Immunity (6kV contact/8kV air) IEC 61000-4-3 EM Field Immunity (30V/m) IEC 61000-4-4 Electrical Fast Transient Immunity (1kV) IEC 61000-4-5 Surge (1kV) IEC 61000-4-6 Conducted Immunity (10V) IEC 61000-4-9 Pulsed Magnetic Field Immunity (100A/m) Pressure Port Options 2 = 1/4-19 BSPP Male 5 = 1/4-18 NPT Male F = 1/4-19 BSPP Female G = 1/4-18 NPT Female Dim C (inches) [mm] 3.08 [78.3] 3.18 [80.8] 2.18 [55.42] 2.18 [55.42] Electrical Connection Options 1 = 2 ft cable 4 = Packard Connector 5 = Bendix Connector 6 = Hirschmann Connector Others available upon request SENSOR SOLUTIONS ///D5100 Others available upon request 09/2015 Page 3 D5100 Industrial Differential Pressure Transducer DIMENSIONS (AMPLIFIED OUTPUT) SENSOR SOLUTIONS ///D5100 09/2015 Page 4 D5100 Industrial Differential Pressure Transducer DIMENSIONS (AMPLIFIED OUTPUT) SENSOR SOLUTIONS ///D5100 09/2015 Page 5 D5100 Industrial Differential Pressure Transducer OUTPUT OPTIONS (AMPLIFIED OUTPUT) Code 3 4 5 Output 0.5 – 4.5V (ratiometric) 1 – 5V 4 – 20mA Supply(V) TYP 5.00 15 15 MIN 4.75 8 9 MAX 5.25 30 30 PERFORMANCE SPECIFICATIONS (mV OUTPUT) Supply Voltage: 10Vdc Ambient Temperature: 25°C (unless otherwise specified PARAMETERS Supply Voltage Zero Pressure Output Span 10 14 2.0 77 80 83 Input Resistance 5.5 Pressure Cycles MAX 0 -0.3 Isolation, Body To Any Lead TYP -2.0 Accuracy Output Resistance ≥5 PSI 1 PSI MIN 0.3 9.0 4.0 MIN MAX 10 14 5psi: -2.0 0 2.0 ≥15psi: -1.0 0 1.0 5psi: 98 100 102 ≥15psi: 99 100 101 5psi: -0.25 0.25 ≥15psi: -0.1 0.1 12.5 30.0 TYP 5.5 9.0 12.5 5psi: 4.0 30.0 ≥15psi: 4.0 25.0 UNITS NOTES VDC mV mV %Span 1 KΩ KΩ MΩ @50VDC 50 50 1.00E+6 1.00E+6 0-FS Cycles Proof Pressure (High Side) 10X 3X Rated 2 Proof Pressure (Low Side) 10X 3X Rated 3 Burst Pressure (High Side) 12X 4X Rated 2 Burst Pressure (Low Side) 12X 4X Rated 3 Line (common) Pressure 1000 1000 psi Line Pressure Effect on Zero 0.004 Long Term Stability ±0.25 5psi: 0.0008 TYP ±0.1 Temperature Coefficient – Span -1.5 1.5 Temperature Coefficient – Offset -2.5 2.5 Output Load Resistance Compensated Temperature Operating Temperature Storage Temperature %Span/year 5psi: -1.5 1.5 ≥15psi: -1.0 1.0 5psi: -1.5 1.5 ≥15psi: -1.0 1.0 5 Output Noise (10Hz to 1KHz) Response Time (10% to 90%) %Span/psi ≥15psi: 0.0005 TYP 1.0 1.0 0.1 0.1 50 uV p-p ms 5psi: 0 70 ≥15psi: -20 85 °C -40 +85 -40 +125 °C -40 +125 -40 +125 ºC Voltage Breakdown 500V rms@50Hz, Leakage Current <1mA Sensor Type Differential Pressure Sensor with Unidirectional Calibration Pressure Port Material 316L Stainless Steel Shock 50g, 11 msec Half sine shock per MIL-STD-202F, Method 213B, Condition A SENSOR SOLUTIONS ///D5100 %Span MΩ 5 0 %Span 09/2015 4 Page 6 D5100 Industrial Differential Pressure Transducer Notes 1. Combined linearity, hysteresis and repeatability using Best Fit Straight Line. 2. 1000psi, whichever is less. 3. 150psi, whichever is less. 4. Except cable 105°C Max. Pressure Port Options 2 = 1/4-19 BSPP Male 5 = 1/4-18 NPT Male F = 1/4-19 BSPP Female G = 1/4-18 NPT Female Dim C (inches) [mm] 3.08 [78.3] 3.18 [80.8] 2.18 [55.42] 2.18 [55.42] Electrical Connection Options 1 = 2 ft cable Others available upon request Others available upon request DIMENSIONS (mV OUTPUT) SENSOR SOLUTIONS ///D5100 09/2015 Page 7 D5100 Industrial Differential Pressure Transducer OUTPUT OPTIONS (mV OUTPUT) Code 2 Output 80mV (1psi), 100mV (≥5psi) [ratiometric] Supply(V) TYP 10 MIN MAX 14 ORDERING INFORMATION D5131-000005-300PD Type (D = Differential) Units (P = psi, B = Bar) Pressure Range (See Pressure Range Table) Pressure Port (See Pressure Port Options Table) Specials (nnnnn = Custom Drawing) Connection (See Electrical Connections Table) Output (See Output Options Table) Model NORTH AMERICA EUROPE ASIA Measurement Specialties, Inc., a TE Connectivity Company 45738 Northport Loop West Fremont, CA 94538 Tel: 1-800-767-1888 Fax: 1-510-498-1578 Sales: [email protected] Measurement Specialties (Europe), Ltd., a TE Connectivity Company 26 Rue des Dames 78340 Les Clayes-sous-Bois, France Tel: +33 (0) 130 79 33 00 Fax: +33 (0) 134 81 03 59 Sales: [email protected] Measurement Specialties (China), Ltd., a TE Connectivity Company No. 26 Langshan Road Shenzhen High-Tech Park (North) Nanshan District, Shenzhen 518057 China Tel: +86 755 3330 5088 Fax: +86 755 3330 5099 Sales: [email protected] TE.com/sensorsolutions Measurement Specialties, Inc., a TE Connectivity company. Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2015 TE Connectivity Ltd. family of companies SENSOR SOLUTIONS ///D5100 All Rights Reserved. 09/2015 Page 8