DC-DC Converter DIP-Package DMV-5W SERIES, 5WATT, 4:1 INPUT RANGE FEATURES: 3 years warranty 1500Vdc isolation voltage Metal case with low ripple and noise Operating temperature range -40°C to +85°C Short circuit and input under voltage protection Output voltage (Vdc) Output current (mA) Efficiency Typ. DMV5W-1811 3.3 1000 82% DMV5W-1812 5 1000 82% DMV5W-1813 9 550 82% DMV5W-1814 12 410 82% DMV5W-1815 15 330 82% 24 210 82% ±3.3 500 82% DMV5W-1822 ±5 500 82% DMV5W-1823 ±9 275 82% DMV5W-1824 ±12 205 82% DMV5W-1825 ±15 165 82% DMV5W-1826 ±24 100 82% DMV5W-3611 3.3 1000 82% DMV5W-3612 5 1000 82% DMV5W-3613 9 550 82% DMV5W-3614 12 410 82% DMV5W-3615 15 330 82% 24 210 82% ±3.3 500 82% DMV5W-3622 ±5 500 82% DMV5W-3623 ±9 275 82% DMV5W-3624 ±12 205 82% DMV5W-3625 ±15 165 82% DMV5W-3626 ±24 100 82% Model DMV5W-1816 DMV5W-1821 DMV5W-3616 DMV5W-3621 Input voltage (Vdc) 18(9~36) 36(18~72) Notes: other input and output models may available on request. www.pairuigroup.com Page: 1 / 3 Date:12/17/2013 DC-DC Converter DIP-Package DMV-5W SERIES, 5WATT, 4:1 INPUT RANGE ELECTRICAL Output voltage accuracy --- Vo1, Vo2 : ±1.0%, ±3.0% Line regulation Nominal Load, full voltage Vo1, Vo2 : ±0.2%, ±1.5% Load regulation 20% ~ 100% full load Vo1, Vo2 : ±0.5%, ±4.0% 5%-50%-75% load capability ∆Vo1/∆t: ±4.0%/500μs Dynamic response (transient/recovery time) Vo≤5.0V, ≤50mVp-p Ripple and noise 20MHz BM, full load Vo≥48V, ≤180mVp-p Other, ≤100mVp-p Operating frequency Typical value 300KHz typ./330KHz max. Turn-on delay time Typical value ≤200ms Isolation voltage Input to output 1500Vdc (<0.5mA/min) Input to case Efficiency Nominal input, full load Operating temperature range --- -40°C to +85°C Storage temperature range --- -55°C to +120°C Short circuit protection --- Auto-recovery Input under voltage protection 500Vdc Vo≤5.0V, 80% typ. Vo>5.0V, 82% typ. When input voltage is lower than the Auto-recovery low terminal input voltage Relative humidity --- 10%-90% max. MTBF Bellcore TR-332, 25°C 2x105Hrs Notes: Unless otherwise specified, all the parameters of the test conditions are as follows: ambient temperature 25 , the nominal input voltage, pure resistive nominal load. ℃ MECHANICAL CONNECTION PIN # SINGLE DUAL 1 -Vin -Vin 2 +Vin +Vin 3 +Vo +Vo1 4 No Pin COM 5 GND -Vo2 Note: * Unit is mm(inch). www.pairuigroup.com Page: 2 / 3 Date:12/17/2013 DC-DC Converter DIP-Package DMV-5W SERIES, 5WATT, 4:1 INPUT RANGE TEMPERATURE PROFILE NOTES RECOMMENDED TEST AND APPLICATION CIRCUIT FUSE: depends on the actual input current; TVS: depends on the actual input voltage; Recommended capacitor: C1,C2,C5,C8, about 0.1uF; C6: 22uF-100uF; C7, C9: 10uF/10mA. www.pairuigroup.com Page: 3 / 3 Date:12/17/2013