AM20P06-135D Analog Power P-Channel 60-V (D-S) MOSFET These miniature surface mount MOSFETs utilize a high cell density trench process to provide low rDS(on) and to ensure minimal power loss and heat dissipation. Typical applications are DC-DC converters and power management in portable and battery-powered products such as computers, printers, PCMCIA cards, cellular and cordless telephones. • • • • PRODUCT SUMMARY VDS (V) rDS(on) m(Ω) 135 @ VGS = -10V -60 190 @ VGS = -4.5V ID (A) 16 14 Low rDS(on) provides higher efficiency and extends battery life Low thermal impedance copper leadframe DPAK saves board space Fast switching speed High performance trench technology o ABSOLUTE MAXIMUM RATINGS (TA = 25 C UNLESS OTHERWISE NOTED) Symbol Maximum Units Parameter Drain-Source Voltage -60 VDS V Gate-Source Voltage ±20 VGS a o TA=25 C ID Continuous Drain Current b Pulsed Drain Current a Continuous Source Current (Diode Conduction) a IDM ±40 IS -15 o TA=25 C PD Power Dissipation THERMAL RESISTANCE RATINGS Parameter Symbol a A A W 50 o C TJ, Tstg -55 to 175 Operating Junction and Storage Temperature Range Maximum Junction-to-Ambient Maximum Junction-to-Case 16 RθJA RθJC Maximum Units 50 o 3.0 o C/W C/W Notes a. Surface Mounted on 1” x 1” FR4 Board. b. Pulse width limited by maximum junction temperature 1 PRELIMINARY Publication Order Number: DS-AM20P06-135_A AM20P06-135D Analog Power o SPECIFICATIONS (TA = 25 C UNLESS OTHERWISE NOTED) Parameter Symbol Test Conditions VGS(th) IGSS VDS = VGS, ID = -250 uA Limits Unit Min Typ Max Static Gate-Threshold Voltage Gate-Body Leakage Zero Gate Voltage Drain Current A On-State Drain Current ID(on) A Drain-Source On-Resistance A Forward Tranconductance Diode Forward Voltage IDSS rDS(on) gfs VSD -1 VDS = 0 V, VGS = ±20 V ±100 nA VDS = -48 V, VGS = 0 V -1 -10 uA VDS = -48 V, VGS = 0 V, TJ = 55oC VDS = -5 V, VGS = -10 V VGS = -10 V, ID = -28 A VGS = -4.5 V, ID = -14 A VDS = -15 V, ID = -28 A IS = -2.5 A, VGS = 0 V -20 A 135 190 8 -1.2 mΩ S V Dynamicb Total Gate Charge Gate-Source Charge Gate-Drain Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall-Time Qg Qgs Qgd td(on) tr td(off) tf VDS = -30 V, VGS = -4.5 V, ID = -28 A VDD = -30 V, RL = 30 Ω , ID= -1 A, VGEN= -10 V, RG= 6Ω 18 5 2 8 10 35 12 nC nS Notes a. Pulse test: PW <= 300us duty cycle <= 2%. b. Guaranteed by design, not subject to production testing. Analog Power (APL) reserves the right to make changes without further notice to any products herein. APL makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does APL assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in APL data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. APL does not convey any license under its patent rights nor the rights of others. APL products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the APL product could create a situation where personal injury or death may occur. Should Buyer purchase or use APL products for any such unintended or unauthorized application, Buyer shall indemnify and hold APL and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that APL was negligent regarding the design or manufacture of the part. APL is an Equal Opportunity/Affirmative Action Employer. 2 PRELIMINARY Publication Order Number: DS-AM20P06-135_A AM20P06-135D Analog Power Package Information 3 PRELIMINARY Publication Order Number: DS-AM20P06-135_A