Spec Sheet INDUCTORS (High Reliability Application) SMD Power Inductors for Automotive / Industrial Applications (NR series H type / V type / S type) NRS6028T3R0NMGJV Features Item Summary 3.0μH(±30%), 3600mA, 3400mA Lifecycle Stage Mass Production AEC-Q200 qualified Standard packaging quantity (minimum) Taping 2000pcs Products characteristics table External Dimensions -/6060 L 6mm ±0.2 Inductance 3.0μH(±30%) W 6mm ±0.2 Inductance Measuring Frequency 100kHz H 2.8mm max Rated Current -Saturation Current 3600mA Rated Current -Temperature Rise Current 3400mA DC Resistance (max) 0.0299Ω Avg. of DC.Resistance 0.023Ω Self-resonant Frequency (min) 55MHz RoHS Compliance Yes Halogen Free Yes Soldering Method Reflow CaseSize (EIA/JIS) Recommended Land Patterns 2015.03.09 The data is reference only. Electrical characteristics vary depending on environment or measurement condition. TAIYO YUDEN reserves the right to make change to the Date at any time without notice. Before making final selection, please check product specification. http://www.ty-top.com Powered by TCPDF (www.tcpdf.org) Halogen free / RoHS compliant Wire Wound Inductor 2014/11/5 -Electrical Characteristics Data- SMD Power Inductors for Industrial / Automotive Comfort and Safety Applications (NR series S type)(AEC-Q200 qualified) Dimension Length : Width : Height : NRS6028T3R0NMGJV unit : mm 6.0 + / - 0.2 6.0 + / - 0.2 2.8 max. unit : inch ( 0.236 + / - 0.008 ) ( 0.236 + / - 0.008 ) ( 0.11 max. ) Inductance : 3.0 uH ( test freq at 0.1MHz ) ohm ( typ / max ) DC Resistance : 0.023 / 0.0299 Saturation Current : 3,600 mA ( max ) Temp. rise Current : 3,400 mA ( max ) Saturation current typical : 30% reduction from initial L value. AEC-Q200 qualified Temp rise Current typical : Temperature will rise by 40 deg C DC Bias vs Inductance DC Bias vs Temperature 60 Self-temperature rise [deg] 5 Inductance [uH] 4 3 2 1 0 0 2000 4000 6000 8000 10000 DC Bias [mA] 50 40 30 20 10 0 0 1000 2000 3000 4000 5000 DC Bias [mA] Frequency vs Inductance Inductance [uH] 100 10 1 0.1 0.1 1 10 100 Frequency [MHz] The data is reference only. Electrical characteristics vary depending on environment or measurement condition. TAIYO YUDEN reserves the right to make change to the data at any time without notice. Before making final selection, please check product specification. The products are tested based on the test conditions and methods defined in AEC-Q200. Please consult with TAIYO YUDEN for the details of the product specification and AEC-Q200 test results, etc., and please review and approve TAIYO YUDEN's product specification before ordering.