SAW Bandpass Filter F1G92 Features z W-CDMA applications z Usable bandwidth of 60 MHz z No impedance matching require for operation at 50 Ω z Ceramic Surface Mounted Device Package ( 3.0 mm * 3.0 mm ) z Single-ended Operation z RoHS Compliant Package Dimensions 1 2 I 1G92 3 6 6 1 5 5 2 4 4 3 Dimensions shown are nominal in millimeters Pin Configurations Body : Al2O3 Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um Ni Plating 2 Input 5 Output 1, 3, 4, 6 Case ground Maximum Ratings Parameters Unit Minimum Typical Maximum Operating Temperature Range ℃ -30 25 85 Storage Temperature Range ℃ -40 - 85 Power Handling Capability dBm - - 13 Electrostatics Sensitive Device (ESD) I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F1G92 Rev. Date 2007-01-24 Rev. NC6001-AS03 1/7 SAW Bandpass Filter F1G92 Specifications Minimum Typical Maximum Unit Center Frequency ( Fc ) - 1950.0 - MHz Insertion Loss (In Fc +/- 30.0 MHz) - 2.8 4.0 dB Amplitude Ripple (In Fc +/- 30.0 MHz) - 1.4 2.4 dBp-p VSWR (In Fc +/- 30.0 MHz) - 1.8 2.4 0.3 MHz ~ 1840.0 MHz 20.0 32.0 - 1850.0 MHz ~ 1900.0 MHz 10.0 21.0 - 2000.0 MHz ~ 2030.0 MHz 4.5 10.0 - 2030.0 MHz ~ 2060.0 MHz 20.0 47.0 - 2060.0 MHz ~ 3000.0 MHz 22.0 29.0 - -30 25 85 ℃ 13 dBm Relative Attenuation Temperature Range (Operational) Input RF Power (In Fc +/- 30.0 MHz) Input/Output Impedance dB 50 Ohms Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 3) All attenuation measurements are measured relative to insertion loss I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F1G92 Rev. Date 2007-01-24 Rev. NC6001-AS03 2/7 SAW Bandpass Filter F1G92 Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) Input 50Ω Output 50Ω Marking Configuration 1) I2) 1G923) 1) Pad Number 1 Index 2) Manufacturer name 3) Marking Number * Ink or Laser Marking available I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F1G92 Rev. Date 2007-01-24 Rev. NC6001-AS03 3/7 SAW Bandpass Filter F1G92 Typical Performance ( at 25℃ ) CH1 S21 LOG 10 dB/ 24 Jan 2007 17:29:20 3:-2 . 3230 dB 1 950. 000 000 MHz REF 0 dB CH1 Markers 1:-2 . 9426 dB 1. 92000 GHz 3 Cor 1 2:-2 . 6196 dB 1. 98000 GHz 2 CENTER1 950. 000 000 MHz CH1 S21 LOG 10 dB/ REF 0 dB SPAN 600. 000 000 MHz 24 Jan 2007 17:19:40 1:-2 . 6129 dB 1 950. 000 000 MHz CH1 Markers Cor 2:-38 . 759 dB 2. 14000 GHz 1 2 START . 010 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 STOP 3 000. 000 000 MHz Part No. F1G92 Rev. Date 2007-01-24 Rev. NC6001-AS03 4/7 SAW Bandpass Filter F1G92 Input / Output VSWR Charts CH1 S11 SWR 1 / 24 Jan 2007 17:29:30 3: 2. 1750 1 950. 000 000 MHz REF 1 CH1 S22 SWR 1 / 24 Jan 2007 17:29:37 3: 1. 9878 1 950. 000 000 MHz REF 1 CH1 Markers CH1 Markers 1: 1. 5531 1. 92000 GHz Cor 1: 1. 5307 1. 92000 GHz Cor 2: 2. 0718 1. 98000 GHz 2: 2. 1366 1. 98000 GHz 3 3 2 2 1 1 CENTER1 950. 000 000 MHz CENTER1 950. 000 000 MHz SPAN 600. 000 000 MHz SPAN 600. 000 000 MHz Input / Output Smith Charts CH1 S11 1 U FS 3: 32. 660 25. 986 24 Jan 2007 17:29:43 2. 1210 nH 1 950. 000 000 MHz CH1 S22 1 U FS 3: 31. 827 21. 229 24 Jan 2007 17:29:50 1. 7326 nH 1 950. 000 000 MHz CH1Markers 1: 43. 961 18. 527 1. 92000 GHz Cor CH1Markers 1: 69. 727 15. 898 1. 92000 GHz Cor 2: 24. 907 10. 520 1. 98000 GHz 3 2: 24. 164 -1 . 9043 1. 98000 GHz 3 2 1 1 2 CENTER1 950. 000 000 MHz SPAN 600. 000 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 CENTER1 950. 000 000 MHz SPAN 600. 000 000 MHz Part No. F1G92 Rev. Date 2007-01-24 Rev. NC6001-AS03 5/7 SAW Bandpass Filter F1G92 Packing Specification 1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel ) 2. Taping Structure : The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE REEL CARRIER TAPE Tape Specification 1. Leader part and vacant position specification Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min. END START Tape Running Direction 2. Tensile strength of carrier tape 4.4N/mm width 3. Top cover tape adhesion Direction of pull Top cover tape 0~15 degree 1) pull off angle : 0~15° 2) speed : 300mm/min 3) force : 20~70g I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Carrier tape Part No. F1G92 Rev. Date 2007-01-24 Rev. NC6001-AS03 6/7 SAW Bandpass Filter F1G92 Carrier Tape Dimensions [unit : mm] A 3.40 ± 0.1 B 3.40 ± 0.1 C 7.25 ± 0.1 D 1.70 ± 0.1 E 12.00 ± 0.1 F 8.00 ± 0.1 Part Direction Tape Running Direction Reel Dimensions [unit : mm] I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F1G92 Rev. Date 2007-01-24 Rev. NC6001-AS03 7/7