MUR1610CT, MUR1615CT, MUR1620CT, MUR1640CT, MUR1660CT Power Rectifiers http://www.kersemi.com . . . designed for use in switching power supplies, inverters and as free wheeling diodes, these state–of–the–art devices have the following features: • • • • • • • • ULTRAFAST RECTIFIERS 8.0 AMPERES 100–600 VOLTS Ultrafast 35 and 60 Nanosecond Recovery Times 175°C Operating Junction Temperature Popular TO–220 Package Epoxy Meets UL94, VO @ 1/8″ High Temperature Glass Passivated Junction High Voltage Capability to 600 Volts Low Leakage Specified @ 150°C Case Temperature Current Derating @ Both Case and Ambient Temperatures 1 2, 4 3 Mechanical Characteristics: • Case: Epoxy, Molded • Weight: 1.9 grams (approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal • • • Leads are Readily Solderable Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds Shipped 50 units per plastic tube Marking: U1610, U1615, U1620, U1640, U1660 4 MARKING DIAGRAM U16xx 1 2 3 TO–220AB CASE 221A PLASTIC MAXIMUM RATINGS U16xx = Device Code xx = 10, 15, 20, 40 or 60 ORDERING INFORMATION Device Package Shipping MUR1610CT TO–220 50 Units/Rail MUR1615CT TO–220 50 Units/Rail MUR1620CT TO–220 50 Units/Rail MUR1640CT TO–220 50 Units/Rail MUR1660CT TO–220 50 Units/Rail 1 MUR1620CT/D MUR1610CT, MUR1615CT, MUR1620CT, MUR1640CT, MUR1660CT MAXIMUM RATINGS MUR16 Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current Total Device, (Rated VR), TC = 150°C Per Leg Total Device Symbol 10CT 15CT 20CT 40CT 60CT Unit VRRM VRWM VR 100 150 200 400 600 Volts IF(AV) 8.0 16 Amps Peak Rectified Forward Current Per Diode Leg (Rated VR, Square Wave, 20 kHz), TC = 150°C IFM 16 Amps Nonrepetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFSM 100 Amps Operating Junction Temperature and Storage Temperature TJ, Tstg 65 to +175 °C THERMAL CHARACTERISTICS (Per Diode Leg) Maximum Thermal Resistance, Junction to Case RθJC 3.0 °C/W 2.0 ELECTRICAL CHARACTERISTICS (Per Diode Leg) Maximum Instantaneous Forward Voltage (Note 1.) (iF = 8.0 Amps, TC = 150°C) (iF = 8.0 Amps, TC = 25°C) vF Maximum Instantaneous Reverse Current (Note 1.) (Rated dc Voltage, TC = 150°C) (Rated dc Voltage, TC = 25°C) iR Maximum Reverse Recovery Time (IF = 1.0 Amp, di/dt = 50 Amps/µs) (IF = 0.5 Amp, IR = 1.0 Amp, IREC = 0.25 Amp) trr Volts 0.895 0.975 1. Pulse Test: Pulse Width = 300 µs, Duty Cycle ≤ 2.0% http://kersemi.com 2 1.00 1.30 1.20 1.50 µA 250 5.0 500 10 35 25 60 50 ns MUR1610CT, MUR1615CT, MUR1620CT, MUR1640CT, MUR1660CT MUR1610CT, MUR1615CT, MUR1620CT 100 IR, REVERSE CURRENT ( A) 70 50 30 TJ = 175°C 100°C 10 7.0 TJ = 175°C 100°C 0.8 0.4 0.2 0.08 0.04 0.02 25°C 0 25°C 40 20 60 5.0 80 100 120 140 160 180 200 VR, REVERSE VOLTAGE (VOLTS) Figure 2. Typical Reverse Current, Per Leg* 3.0 * The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR. 2.0 IF(AV) , AVERAGE POWER DISSIPATION (WATTS) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 20 800 400 200 80 40 20 8.0 4.0 2.0 1.0 0.7 0.5 0.3 0.2 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 1.0 0.9 1.1 1.2 10 RATED VR APPLIED 9.0 8.0 7.0 6.0 5.0 dc 4.0 3.0 2.0 1.0 0 vF, INSTANTANEOUS VOLTAGE (VOLTS) SQUARE WAVE 140 150 145 155 160 165 170 175 180 TC, CASE TEMPERATURE (°C) Figure 1. Typical Forward Voltage, Per Leg 14 12 PF(AV) , AVERAGE POWER DISSIPATION (WATTS) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) Figure 3. Current Derating, Case, Per Leg RJA = 16°C/W RJA = 60°C/W (NO HEATSINK) dc 10 8.0 SQUARE WAVE 6.0 4.0 dc 2.0 SQUARE WAVE 0 0 20 40 60 80 100 120 140 160 180 200 10 TJ = 175°C 9.0 8.0 SQUARE WAVE 7.0 dc 6.0 5.0 4.0 3.0 2.0 1.0 0 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 TA, AMBIENT TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 4. Current Derating, Ambient, Per Leg Figure 5. Power Dissipation, Per Leg http://kersemi.com 3 10 MUR1610CT, MUR1615CT, MUR1620CT, MUR1640CT, MUR1660CT MUR1640CT 70 50 100°C TJ = 175°C 20 25°C 10 7.0 800 400 200 TJ = 175°C 80 40 20 8.0 4.0 2.0 150°C 100°C 0.8 0.4 0.2 0.08 0.04 0.02 25°C 0 100 50 5.0 150 200 250 300 350 400 450 500 VR, REVERSE VOLTAGE (VOLTS) Figure 7. Typical Reverse Current, Per Leg* 3.0 * The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these curves if VR is sufficiently below rated VR. 2.0 IF(AV) , AVERAGE POWER DISSIPATION (WATTS) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 30 IR, REVERSE CURRENT ( A) 100 1.0 0.7 0.5 0.3 0.2 0.1 0.4 0.6 0.8 1.2 1.0 1.4 1.6 10 RATED VR APPLIED 9.0 8.0 7.0 6.0 5.0 dc 4.0 3.0 2.0 1.0 0 vF, INSTANTANEOUS VOLTAGE (VOLTS) SQUARE WAVE 140 150 145 155 160 165 170 175 180 TC, CASE TEMPERATURE (°C) Figure 6. Typical Forward Voltage, Per Leg 14 PF(AV) , AVERAGE POWER DISSIPATION (WATTS) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) Figure 8. Current Derating, Case, Per Leg RJA = 16°C/W RJA = 60°C/W (NO HEAT SINK) 12 10 dc 8.0 6.0 SQUARE WAVE 4.0 dc 2.0 SQUARE WAVE 0 0 20 40 60 80 100 120 140 160 180 200 10 TJ = 175°C 9.0 SQUARE WAVE dc 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 TA, AMBIENT TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 9. Current Derating, Ambient, Per Leg Figure 10. Power Dissipation, Per Leg http://kersemi.com 4 10 MUR1610CT, MUR1615CT, MUR1620CT, MUR1640CT, MUR1660CT MUR1660CT 100 IR, REVERSE CURRENT ( A) 70 50 TJ = 150°C 20 100°C 10 25°C 7.0 TJ = 150°C 100°C 25°C 100 200 5.0 400 300 500 600 VR, REVERSE VOLTAGE (VOLTS) Figure 12. Typical Reverse Current, Per Leg* 3.0 * The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR. 2.0 IF(AV) , AVERAGE POWER DISSIPATION (WATTS) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 30 800 400 200 80 40 20 8.0 4.0 2.0 0.8 0.4 0.2 0.08 0.04 0.02 1.0 0.7 0.5 0.3 0.2 0.1 0.4 0.6 0.8 1.0 1.2 1.6 1.4 1.8 10 RATED VR APPLIED 9.0 8.0 7.0 6.0 5.0 dc 4.0 3.0 2.0 1.0 0 vF, INSTANTANEOUS VOLTAGE (VOLTS) SQUARE WAVE 140 150 145 155 160 165 170 175 180 TC, CASE TEMPERATURE (°C) Figure 11. Typical Forward Voltage, Per Leg 10 RJA = 16°C/W RJA = 60°C/W (NO HEAT SINK) 9.0 dc 8.0 PF(AV) , AVERAGE POWER DISSIPATION (WATTS) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) Figure 13. Current Derating, Case, Per Leg 7.0 6.0 SQUARE WAVE 5.0 4.0 dc 3.0 2.0 SQUARE WAVE 1.0 0 0 20 40 60 80 100 120 140 160 180 200 14 13 12 11 10 9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0 SQUARE WAVE TJ = 175°C dc 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 TA, AMBIENT TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 14. Current Derating, Ambient, Per Leg Figure 15. Power Dissipation, Per Leg http://kersemi.com 5 10 1.0 D = 0.5 0.5 0.2 0.1 0.1 0.05 0.05 t1 0.01 0.02 0.01 ZθJC(t) = r(t) RθJC P(pk) 0.01 0.02 0.05 D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT T1 t2 TJ(pk) - TC = P(pk) ZθJC(t) DUTY CYCLE, D = t1/t2 SINGLE PULSE 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 t, TIME (ms) Figure 16. Thermal Response 1000 C, CAPACITANCE (pF) r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) MUR1610CT, MUR1615CT, MUR1620CT, MUR1640CT, MUR1660CT MUR1620CT THRU 1660CT MUR1605CT THRU 1615CT 300 TJ = 25°C 100 30 10 1.0 10 VR, REVERSE VOLTAGE (VOLTS) Figure 17. Typical Capacitance, Per Leg http://kersemi.com 6 100 100 200 500 1000 MUR1610CT, MUR1615CT, MUR1620CT, MUR1640CT, MUR1660CT PACKAGE DIMENSIONS TO–220 THREE–LEAD TO–220AB CASE 221A–09 ISSUE AA –T– B SEATING PLANE C F T S 4 DIM A B C D F G H J K L N Q R S T U V Z A Q 1 2 3 U H K Z L R V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. J G D N http://kersemi.com 7 INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.018 0.025 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 ----0.080 MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 3.73 2.42 2.66 2.80 3.93 0.46 0.64 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 ----2.04