Power Inductors <SMD Type: CDRH Series> Type: CDRH26D11 ◆ Product Description ・3.0×2.8mm Max.(L×W),1.0mm Max. Height. ・Inductance range: 1～15μH. ・Rated current range:0.36～1.44A. ・Custom design is available. ◆ Feature ・Magnetically shielded construction. ・Ideally used in Mobilephone,PDA,MP3,DSC/DVC etc as DC-DC Converter inductors. ・RoHS Compliance. ◆ Dimensions (mm) Dimensions without tolerance are approx. ◆ Land Pattern (mm) Please refer to the sales offices on our website for a representative near you www.sumida.com 1/2 Power Inductors <SMD Type: CDRH Series> Type: CDRH26D11 ◆ Specification Part Name ※ Stamp Saturation Current （A）※1 Inductance (μH) 100kHz/1V D.C.R.(mΩ) Max.(Typ.) (at 20℃) (at 20℃) (at 105℃) Temperature Rise Current (A)※2 CDRH26D11NP-1R0P□ A 1.0±25% 63.8(51.0) 1.44 1.20 1.80 CDRH26D11NP-1R4P□ B 1.4±25% 71.1(56.9) 1.24 1.07 1.70 CDRH26D11NP-2R2P□ C 2.2±25% 111(81.1) 0.98 0.85 1.25 CDRH26D11NP-2R7P□ D 2.7±25% 122(97.7) 0.88 0.74 1.15 CDRH26D11NP-3R3P□ E 3.3±25% 135(108) 0.75 0.65 1.05 CDRH26D11NP-4R7P□ F 4.7±25% 225(180) 0.64 0.52 0.85 CDRH26D11NP-5R6P□ G 5.6±25% 261(209) 0.59 0.50 0.75 CDRH26D11NP-6R8P□ H 6.8±25% 280(224) 0.56 0.45 0.70 CDRH26D11NP-8R2P□ I 8.2±25% 386(309) 0.47 0.40 0.60 CDRH26D11NP-100P□ J 10±25% 431(345) 0.44 0.38 0.52 CDRH26D11NP-120P□ K 12±25% 601(481) 0.39 0.33 0.43 CDRH26D11NP-150P□ L 15±25% 694(555) 0.36 0.31 0.40 ※ Description of part name CDRH26D11NP-1R0P□ B Box C Carrier Tape ※1.Saturation Current: The DC current at which the inductance decreases to 70% of it's nominal value. (Ta＝20℃) ※2.Temperature Rise Current: The DC current at which the temperature rise is △t＝40℃ (Ta＝20℃) . Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2