5.0mm x 6.0mm SURFACE MOUNT LED LAMP PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description Features zCHIPS CAN BE CONTROLLED SEPARATELY. zSUITABLE Part Number: AAAF5060BESUVGAC BLUE HYPER RED GREEN FOR ALL SMT ASSEMBLY AND SOLDER The Blue source color devices are made with InGaN on SiC Light Emitting Diode. The Hyper Red source color devices are made with DH PROCESS. ON TAPE AND REEL. InGaAlP on GaAs substrate Light Emitting Diode. zPACKAGE: 500PCS / REEL. The Green source color devices are made with InGaN on zMOISTURE SENSITIVITY LEVEL : LEVEL 4. G-SiC Light Emitting Diode. zAVAILABLE zRoHS Static electricity and surge damage the LEDS. COMPLIANT. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAG5857 REV NO: V.1 DATE: JUN/21/2006 PAGE: 1 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201002371 Selection Guide Dice Part No. Iv (mcd) [2] @30mA *50mA Lens Type BLUE (InGaN) HYPER RED (InGaAIP) AAAF5060BESUVGAC WATER CLEAR GREEN (InGaN) Min. Typ. 110 250 *380 *500 180 350 Viewing Angle [1] 2 θ 1/2 100° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. *Luminous intensity with asterisk is measured at 50mA; Luminous intensity / luminous flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue Hyper Red Green λD [1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 465 640 520 nm IF=20mA Blue Hyper Red Green 470 628 525 nm IF=20mA Spectral Line Half-width Blue Hyper Red Green 25 27 35 nm IF=20mA C Capacitance Blue Hyper Red Green 110 45 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue Hyper Red Green 3.7 1.9 3.2 4.3 2.5 4.0 V IF=20mA IR Reverse Current Blue Hyper Red Green 10 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Power dissipation [2] Hyper Red Green 350 Units mW DC Forward Current 30 50 50 mA Peak Forward Current [1] 160 185 100 mA 5 5 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Within 350mW at all chips are lightened. SPEC NO: DSAG5857 REV NO: V.1 DATE: JUN/21/2006 PAGE: 2 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201002371 AAAF5060BESUVGAC Blue SPEC NO: DSAG5857 REV NO: V.1 DATE: JUN/21/2006 PAGE: 3 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201002371 Hyper Red SPEC NO: DSAG5857 REV NO: V.1 DATE: JUN/21/2006 PAGE: 4 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201002371 Green SPEC NO: DSAG5857 REV NO: V.1 DATE: JUN/21/2006 PAGE: 5 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201002371 AAAF5060BESUVGAC Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAG5857 REV NO: V.1 DATE: JUN/21/2006 PAGE: 6 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201002371 PACKING & LABEL SPECIFICATIONS AAAF5060BESUVGAC SPEC NO: DSAG5857 REV NO: V.1 DATE: JUN/21/2006 PAGE: 7 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201002371