MADP-007417-10720T SMQ HIPAX PIN Diode V2 Features • • • • • • RoHS Compliant Rectangular MELF SMQ Ceramic Package Low Rs for Lower Series Loss Long τL for Low Intermodulation Distortion Low Cj for High Series Isolation High Average Incident Power Handling Capability 1072 Description and Applications Designed for Automated Assembly The MADP-007417-10720T is a surface mountable PIN diode in a Metal Electrode Leadless Faced (MELF) package. The device incorporates M/A-COM Technology Solutions time proven HIPAX technology to produce a low inductance ceramic package with no ribbons or whisker wires. Incorporated in the package is a fully passivated PIN diode chip that is full face bonded on both the cathode and anode to maximize surface area for low electrical and thermal resistance. The MADP-007417-10720T has been comprehensively characterized both electrically and mechanically to ensure repeatable and predictable performance. The diode is well suited for use in low loss, low distortion, and high power switching circuits. The low thermal resistance of this device provides excellent high average performance at RF power incident levels up to 200 watts CW. This device is designed to meet the most rigorous electrical and mechanical requirements. SMQ HIPAX PIN diodes are designed for high volume tape and reel assembly. The rectangular package design provides for a highly efficient means for automatic pick and place assembly. The parallel flat surfaces are suitable for key jaw or vacuum pickup techniques. All solderable surfaces are tin plated and compatible with reflow and vapor phase soldering methods. Absolute Maximum Ratings1 @ +25°C Parameter Absolute Maximum Operating Temperature -65°C to +125°C Storage Temperature -65°C to +150°C Diode Junction Temperature +175°C Continuous Diode Mounting Temperature +265 °C for 10 seconds RF C.W. Incident Power +53dBm C.W. Forward D.C. Current +150mA Reverse D.C. Voltage @ -10 uA -1000V 1. Exceeding these limits may cause permanent damage. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MADP-007417-10720T SMQ HIPAX PIN Diode V2 Typical Electrical Performance 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MADP-007417-10720T SMQ HIPAX PIN Diode V2 Ls (nH) Ct (pF) Typical Electrical Performance 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MADP-007417-10720T SMQ HIPAX PIN Diode V2 Electrical Specifications @ +25 °C Parameter Symbol Condition Unit Value Forward Voltage (Maximum) VF IF = +100mA 1.0VDC Voltage Rating (Minimum) VR Ir = -10uA Total Capacitance (Maximum) CT -100V @ 100MHz 0.7pF Series Resistance (Maximum) RS +100mA @ 100MHz 0.8 Ohms Parallel Resistance (Minimum) RP -10V @ 100MHz 50K Ω Carrier Lifetime (Nominal) τL +6mA / -10mA @ (50% - 90% Voltage) 6.5 µs I-Region Length (Nominal) μm - 140 μm C.W. Thermal Resistance (Maximum) θ IH = 1A, IL = 10mA, T = 1mS 13°C/W Power Dissipation in Free Air (Maximum) W IF = +100mA 4W Power Dissipation with Diode Case at Tambient (Maximum) PD IF = +100mA 12W 1072 MELF Surface Mount Package 1000 VDC Circuit Pad Layout for 1072 MELF Cathode B A Solderable Surfaces A C Dimension 4 MIN. MAX. MIN. MAX. A 0.080 0.095 2.032 2.413 B 0.115 0.135 2.921 3.429 C 0.008 0.030 0.203 0.762 INCHES Dimension inches mm A 0.093 2.36 B 0.050 1.27 C 0.060 1.52 MM A B C B ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MADP-007417-10720T SMQ HIPAX PIN Diode V2 Environmental Capability HIPAX devices are applicable for use in industrial and military applications and can be screened to meet the environmental requirements of MIL-STD-750, MIL-STD-202 as well as other military standards. The table below lists some of the MIL-STD 750 tests the device is designed to meet. MIL-STD-750 Test Method Description High Temperature Storage 1031 +150 °C, for 340 Hours Temperature Shock 1051 -65 °C to +125 °C, 20 Cycles HTRB 1038 80% of rated VB, +150 °C, for 96 Hours Moisture Resistance 1021 No Initial Conditioning, 85 % RH, +85° C Gross Leak 1071 Cond. E Dye Penetrant Visual Vibration Fatigue 2046 20,000 G’s, 60 Hz, x, y, z axis Solderability 2026 Test Temperature = +245 °C Ordering Information 5 Part Number Package Quantity MADP-007417-10720T Tape and reel 1500ps ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.