HVF Series Ohmite’s High Voltage Flip Chip Series incorporates high accuracy screen printing technology to achieve high voltage capability in a stable flip chip SMD chip resistor package. The HVF Series offers unmatched performance in comparison to standard chip resistors. Its unique design provides lower voltage and temperature coefficients, less noise, tighter tolerances, better stability, higher resistance values, and higher voltage ratings. HVF is available in convenient 1206 and 2512 footprints. High Voltage Flip Chip Film This product has been DISCONTINUED December 2017 F e at u r e s • High voltage up to 3,000 volts • Industry standard sizes • Working temperature range –55°C to 200°C • Designed for automatic insertion • Non-magnetic construction S ER I E S S P E C I F I C AT I O N S Series Resistance Range HVF1206 1K-100M >100M-10G >10G-100G HVF2512 1K-100G Tol. 1% std. 5% 10% 1% std. Power Rating (mW) 300 Voltage Rating* 1,500 1000 3,000 *Use Ohm’s Law (V= √P*R) to calculate maximum working voltage. **Maximum available quantity per reel is 3,500 for 1206 size and 2,000 for 2512 size; call 1-866-9-OHMITE for details. ch a r a c t e r is t ics Resistance Range 1KΩ to 100GΩ Resistance Tolerance ±1% std.; 5% for HVF1206 100MΩ-10GΩ more; 10% for 10GΩ+ Temperature Coefficient ±100ppm std. Coating Silicone Solder Pad Material Silver (PdAg) Note: HVF Series should not be used with tin-lead based solder compositions. Only silver-based solder compositions are recommended. Care should be taken in the selection of the solder flux contained in the solder paste. Some pastes are "corrosive" and can damage the coating and also the resistive layer during the soldering process at high temperature. PCBs must be properly cleaned to remove any layers of moisture containing halides below the resistor. We recommend Halide Free (or Halogen Free) solder pastes, containing for example ROL0 or similar. It is advisable for the PCB layout to provide a slot, or air gap, underneath the downward facing resistor element, thereby increasing insulation resistance and reducing the possibility of capacitive coupling to the PCB. Under no circumstances should any copper trace be present in the layout directly under the resistive element. Derating Voltage coefficient of Resistance Percent Rated Watts 100 70° 80 60 40 20 0 0 50 100 150 Ambient Temperature, °C 200 Series Resistance Range VCR (-ppm/V)* 1206 1K ..10MΩ >10M ..100MΩ >100M ..1GΩ >1GΩ .. 5GΩ <3.20 <15.00 <29.00 <40.00 2512 1K ..30MΩ >30M ..300MΩ >300M ..3GΩ >3GΩ .. 5GΩ 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • [email protected] *Typical values. Voltage coefficient of resistance strongly depends on the resistance value. Contact Ohmite for details. <0.80 <4.00 <7.00 <10.00 23 HVF Series High Voltage Flip Chip Film p e r fo r m a nc e d a t a Insulation Resistance >10,000 MΩ 500 Volt 25 °C 75% relative humidity Dielectric Strength >1,000 Volt 25 °C 75% relative humidity Thermal Shock ∆ R/R < 0.1% typ., 0.50% max. MIL Std. 202, method 107, Cond. C (IEC 68 -2 -14) Overload ∆ R/R < 0.1% typ., 0.50% max. 1,5 x Pnom, 5 sec (do not exceed max. voltage) Moisture Resistance ∆ R/R < 0.1% typ., 0.50% max. MIL Std. 202, method 106 (IEC 68 -2 -3) Load Life ∆ R/R < 0.1% typ., 0.50% max. 1000 hours at rated power (IEC 115 -1) d i m e nsions (in. ±0.008) Silicone Aluminum Oxide ta p e a n d r e e l Per EIA Std. RS-481 a T Tape W 0.069 ±.004 1.75 ±0.10 L Ruthenium Oxide 0.059 +.004/-0.0 1.5 +0.10/-0.0 0.157 ±.004 4.0 ±0.10 0.079 ±.002 2.0 ±0.05 Silver (PdAg) B Land pattern M L N Land pattern dimensions are for reference only O Series HVF1206 HVF2512 L W a T (max.) 0.128 0.063 0.018 0.028 0.252 0.126 0.026 0.032 M N O 0.138 ±.002 3.5 ±0.05 0.157 ±.004 4.0 ±0.10 0.032 ±.004 0.81 ±0.10 0.315 ±.012 8.0 ±0.30 A DIRECTION OF FEED L 0.150 0.040 0.080 0.070 0.288 0.062 0.140 0.164 O r d e r in g info r m a t ion Taping Code blank = bulk package T = tape & reel RoHS Compliant HVF1206T1004JET High Voltage Case Size TCR Ohms Flip Chip T = 100 ppm First 3 digits are 1206 Series V = 50 ppm* significant; last 2512 digit specifies *Not available for all resistance number of zeros to values; consult factory follow. Example: 1006 = 100MΩ Tolerance F = 1% G = 2% J = 5% K = 10% Standard part numbers Ohms HVF1206--25K ---T2502FE 50K ---T5002FE 75K ---T7502FE 100K ---T1003FE 250K ---T2503FE 500K ---T5003FE 1000K ---T1004FE 1500K ---T1504FE 2000K ---T2004FE 2500K ---T2504FE 5000K ---T5004FE 7500K ---T7504FE 1G ---T1007JE 5G 10G ---T1008JE HVF2512-----T2502FE ---T5002FE ---T7502FE ---T1003FE ---T2503FE ---T5003FE ---T1004FE ---T1504FE ---T2004FE ---T2504FE ---T5004FE ---T7504FE ---T1007FE ---T5007FE Trailer 230mm min.–560mm max. May consist of carrier and/or cover tape followed by a minimum of 160mm of carrier with sealed cover tape Components Leader Minimum of 40 empty component pockets sealed with cover tape Reel 0.56 max. 14.2 max. 0.512 ±.008 13.0 ±.20 7.00 ±.079 178.0 ±2.0 1.969 min. 50.0 min. 0.331 +.059/-0.0 8.4 +1.5/-0.0 Standard Qty/Reel is 1000; maximum available quantity per reel is 3,500 for 1206 size and 2,000 for 2512 size; call 1-866-9-OHMITE for details. rev 1/18-1 24 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • [email protected]