OV7710 VGA product brief high-performance, all-digital automotive solution available in a lead-free package The OV7710 image sensor is a high performance 1/4-inch, single-chip VGA digital video camera designed specifically for automotive applications. It excels in low light conditions and can operate within a wide temperature range from -40° to 105°C. The sensor meets all automotive market requirements in terms of performance, quality and reliability. The OV7710 has a 656 x 492 image array capable of operating at up to 30 frames per second (fps). It also incorporates de-noise algorithms to cancel Fixed Pattern Noise (FPN), eliminate smearing, and reduce blooming. The OV7710 possesses all required camera functions including exposure control, gain, white balance, windowing and more, which are programmable through the Serial Camera Control Bus (SCCB) interface. Other key features of the OV7710 image sensor are its low power consumption, progressive scanning, external frame sync (Genlock) capability and support for both 10-bit raw data or 8-bit YUV/RGB outputs. It has completed all required AEC-Q100 Grade 2 qualifications. OV7710 applications airbag deployment rear view lane departure warning ordering information blind spot view night vision OV07710-F48V adaptive cruise control (color, QFP2-48) OV07211-F48V (b&w with microlens, QFP2-48) product specifications product features OmniPixel2™ technology progressive scan array size: 656 x 492 single chip 1/4" VGA sensor white balance, exposure time, gain control, etc. power supply: high sensitivity for low-light operation low power consumption master/slave compatible serial camera control bus (SCCB) control interface for register programming low fixed pattern noise, anti-blooming, zero smearing external frame sync capability (Genlock) SPI for overlay control power requirements: – active: 140 mW typical (30 fps VGA, YUV) dual static overlay control AEC-Q100 Grade 2 qualified horizontal mirroring and vertical flipping – core: 1.8VDC± 5% – analog: 3.3VDC ± 10% – I/O: 2.4 to 3.3 VDC – standby: 10 μA typical temperature range: -40°C to 105°C – VGA (640x480): 30 fps – QVGA (320x240): 60 fps functional block diagram OV7710 gain MUX A/D G BLC B SPI interface CS SCK ESO ESI row select overlay image array output formatter control registers (to all circuits) column sense amps digital video (DV) port D [9:0] 1.0μF SCCB master MSCL MSDA RESET PWDN XCLK1 HREF PCLK VS SCCB interface SIO_C SIO_D VREF timing generator OV7710_PB_001 4275 Burton Drive Santa Clara, CA, 95054 version 1.3, September 2008 tel: +1 408 567 3000 fax: +1 408 567 3001 www.ovt.com dynamic range: 60 dB electronic exposure: up to 521:1 (for selected fps) fixed pattern noise: < 0.03% of VPEAK-TO-PEAK max image transfer rate: A/D S/N ratio: 50 dB well capacity: 26 Ke optical format: 1/4" MUX minimum illumination (3000K): 0.04 Lux @ f/1.2 dark current: 10 mV/sec at 60°C – 10-bit raw data – 8-bit YUV/RGB R – color: 3.0 V/(Lux-sec) – b&w: 7.1 V/(Lux-sec) pixel size: 6.0 μm x 6.0 μm output format: analog processing sensitivity OmniVision reserves the right to make changes to their products or to discontinue any product or service without further notice. OmniVision and OmniPixel are registered trademarks of OmniVision Technologies, Inc. The OmniVision logo, CameraChip and OmniPixel2 are trademarks of OmniVision Technologies, Inc. All other trademarks are the property of their respective owners. image area: 4.080 mm x 3.102 mm package dimensions: 12.00 mm x 12.00 mm