CRYSTAL CLOCK OSCILLATORS Data Sheet 0634R Rev. - CMOS AC-A1460 Series Description The AC-A1460 Series of quartz crystal oscillators provide enable/disable 3-state CMOS compatible signals for bus connected systems. Supplying Pin 1 of the AC-A1460 units with a logic “1" or open enables its Pin 3 output. In the disable mode, Pin 3 presents a high impedance to the load. Features • Wide frequency range 0.5MHz to 156.250MHz • User specified tolerance available • Space-saving alternative to discrete component oscillators • 3.3 Volt operation • High shock resistance, to 1000g • Low Jitter • High Q Crystal actively tuned oscillator circuit • No internal PLL avoids cascading PLL problems • High frequencies due to proprietary design • Metal lid electrically connects to ground to reduce EMI • Gold plated pads • RoHs Compliant, Lead Free Construction Electrical Connection Pin Connection 1 2 3 4 Enable/Disable Ground Output VDD 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: [email protected] www.nelfc.com Data Sheet 0634R CRYSTAL CLOCK OSCILLATORS Rev. - AC-A1460 Series Continued CMOS Operating Conditions and Output Characteristics Electrical Characteristics Parameter Frequency Duty Cycle Logic 0 Logic 1 Rise & Fall Time Jitter, RMS(2) Tpz Enable Voltage Disable Voltage Frequency Stability (3) Symbol Conditions ------------@ VDD/2 VOL @ 600µA @ 600µA VOH tr,tf 10-90%VO ----Overtone ------------------------dF/F Overall conditions including: voltage, calibration, temp., 10 yr aging, shock, vibration Min 0.5MHz 45/55% ----VDD-0.2V ------------2.0V -----100ppm Typical --------0.1V VDD-0.1V 1.0 ns --------------------- Max 156.250MHz 55/45% 0.2V ----2.0 ns 5 psec 100 ns ----0.8V +100ppm Min 3.00V 0.0 mA 0.0 mA 0°C -55°C ----------------- Typical 3.3V 40 mA ----------------------------- Max 3.60V 60 mA ±25.0 mA 70°C 125°C 216 mW 253°C 15pf 10 ms General Characteristics Parameter Supply Voltage (1) Supply Current Output current Operating temperature Storage temperature Power Dissipation Solder temperature Load Start-up Time Symbol VDD IDD IO TA TS PD TL ----ts Conditions ----No Load Low level Output Current -------------4 minutes --------- Environmental and Mechanical Characteristics Mechanical Shock Thermal Shock Vibration Hermetic Seal Per MIL-STD-202, Method 213, Condition E Per MIL-STD-883, Method 1011, Condition A 0.060" double amplitude 10 Hz to 55 Hz, 35g’s 55Hz to 2000 Hz Leak rate less than 1 x 10-8 atm.cc/sec of helium Footnotes: 1) External high frequency power supply decoupling required. 2) RMS jitter bandwidth of 12kHz to 20MHz. 3) Standard frequency stability (others available) Test Load: Creating a Part Number AC - A146X - FREQ Package Code AC 4 pad 5x3.2mm SMD Input Voltage Code Specification A 3.3V Tolerance/Performance 0 ±100ppm 0-70°C 1 ±50ppm 0-70°C 7 ±25ppm 0-70°C 9 Customer Specific A ±20ppm 0-70°C B ±50ppm -40 to +85°C C ±100ppm -40 to +85°C 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: [email protected] www.nelfc.com