2.5V HCSL Oscillator RoHS Compliant / REACH Compliant Model: F740SL SERIES Page 1 of 2 Rev. 2/11/2013 http://www.foxonline.com/need_a_sample.htm FEATURES • HCL Differential Output • Low Phase Jitter (under 1pS RMS 12kHz~20MHz) • Tape and Reel (2,000 pcs. STD) • PART NUMBER SELECTION Part Number 844-Frequency-xxxxx 844A-Frequency-xxxxx 844B-Frequency-xxxxx 844C-Frequency-xxxxx 844D-Frequency-xxxxx 844E-Frequency-xxxxx Model Number F740SL F740SLR F745SL F74SLR F746SL F746SLR Frequency Operating Stability1 Temperature (ºC) ±100PPM 0 ~ +70 ±100PPM -40 ~ +85 ±50PPM 0 ~ +70 ±50PPM -40 ~ +85 ±25PPM 0 ~ +70 ±25PPM -40 ~ +85 Frequency Range (MHz) 15.000 ~ 160.000 15.000 ~ 160.000 15.000 ~ 160.000 15.000 ~ 160.000 15.000 ~ 160.000 15.000 ~ 160.000 T OP M a rk ing 5.1 Max 7.1 Max • ELECTRICAL CHARACTERISTICS PARAMETERS Frequency Range (Fo) Storage Temperature Range (Tstg) Supply Voltage (Vdd) Input Current (Idd) Output Symmetry (Cross Point) Rise/Fall Time (0.175 ~ 0.525V) 15.000 ~ 99.999999 MHz 100.000 ~ 160.000 MHz Output Voltage (Vol) (Voh) Output Swing (Vopp) Output Load Standby Current Start-up Time (Ts) Output Disable Time 2 Output Enable Time 2 Aging (per year @ 25ºC) Phase Jitter (12kHz ~ 20MHz) Maximum Soldering Temp / Time Moisture Sensitivity Level (MSL) Termination Finish 1.40 MAX (unless otherwise noted) 15.000 ~ 160.000 MHz -55ºC ~ +125ºC 2.5V ± 5% 40mA 45% ~ 55% 1.0nS 0.7nS -0.15 ~ 0.15V 0.58 ~ 0.85V 0.6V Min 50 Ohms to GND 10µA 10mS 200nS 10mS ±3 PPM 1pS RMS 260ºC / 10 Seconds 1 Au 1.4 #1 #2 #3 #6 #5 #4 2.46 5.08 R e c om m e nde d S o ld e r P a d L a y o u t 5.08 #6 #5 #4 T O P V ie w 4.2 #1 1 Inclusive of 25ºC tolerance, operating temperature range. An internal pullup resistor from pin 1 to pin 6 allows active output if pin 1 is left open. Note: A 0.01µF capacitor should be placed between Vdd (Pin 6) and GND (Pin3) to minimize power supply noise. Drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary. All specifications subject to change without notice. 1.27 2 #2 #3 1.6 1.8 2 P i n C o n n e c t io n s #1 E/D #2 N.C. #3 GND #4 Output_1 #5 Output_2 #6 VDD All dimensions are in millimeters. • ENABLE / DISABLE FUNCTION OUTPUT (Pin 4, Pin 5) (Pin 1) ACTIVE OPEN2 ACTIVE '1' Level Vih ≥ 70% Vdd High Z '0' Level Vil ≤ 30% Vdd FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554 www.foxonline.com EMEA Tel: +44 .1283.568153 | Canada +1.888.438.2369 | Asia Hong Kong Tel: +852.2854.4285 | Japan Tel: +81.3.3374.2079 © 2013 FOX ELECTRONICS | An Integrated Device Technology, Inc. company | ISO9001:2008 Certified 2.5V HCSL Oscillator Model: F740SL SERIES RoHS Compliant / REACH Compliant Page 2 of 2 Rev. 2/11/2013 http://www.foxonline.com/need_a_sample.htm • TAPE SPECIFICATIONS (millimeters) MODEL F740SL B C A ∅1.55 4.0 8.0 D E F STD Reel QTY 7.5 16.0 2.0 2,000 • REEL SPECIFICATIONS (millimeters) MODEL G I J K L H M F740SL 2.5 ∅13.2 ∅21 ∅60.5 ∅180 17.0 1.5 FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554 www.foxonline.com EMEA Tel: +44 .1283.568153 | Canada +1.888.438.2369 | Asia Hong Kong Tel: +852.2854.4285 | Japan Tel: +81.3.3374.2079 © 2013 FOX ELECTRONICS | An Integrated Device Technology, Inc. company | ISO9001:2008 Certified 69