24V driveN, FTP-607 Series 2” high speed thermal printer FTP-627MCL401/601 n Overview The FTP-627 MCL Series are 24V driven high-speed printers with a ultra low profile auto cutter and long life. The FTP-627 MCL Series can be used for a variety of applications, such as POS terminals, ticket vending machines, label printers, banking terminals, and measurement and medical equipment. n HIGHLIGHTS • Ultra low profile Height 21.8 mm, width 81.2 mm, depth 42.2 mm FTP-627MCL401/601 • High speed printing It can print at 100/150 mm/s (800 dotlines/s) maximum by using Fujitsu's unique head drive control. • Auto Cutter Long life and high reliable guilotine with dedicated motor. • Easy paper setting Our lever platen release mechanism allows a wide paper route, so paper can be easily inserted. Conventional auto loading is also available. • Multifunctional die-cast frame Wide operating temperature range, long continuous printing, high ESD absorbtion and discharge of static electricity vibration and shock resistant. FTP-627DSL291R • RoHS compliant FTP-627DSL601R FTP-627MCL401/601 n part numbers Part Number Easy Load Model with low profile cutter FTP-627MCL401 FTP-627MCL601 LSI for driving MCL401 FTP-627CU301R MCL601 FTP-627CU601R MCL401 FTP-627DSL291R Parallel (Centronics) /Serial (RS-232C) MCL601 FTP-627DSL603R (USB) Interface board for Mech/Cutter Cutter supported Interface cables Parallel (Centronics) FTP-628Y202 Serial (RS232C) FTP-628Y302 USB FTP-629Y301 FTP-627DSL605R Serial (RS-232C) n specifications Item Specifications Part number FTP-627MCL401/601 Printing method Thermal-line dot method Dot structure 432 dots/line Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch Effective printing area 54 mm Number of columns ANK 36 columns/line (maximum 12/24 dot font) Paper width 58 mm Paper thickness 60 to 100 µ m (some paper in this range may not be used because of paper characteristics) Printing Speed Character types MCL401 MCL601 Maximum 100mm/sec. (800 dot line/sec.) Maximum 150mm/sec. (1,200 dot line/sec.) Alphanumeric, kana: International characters: JIS Kanji (Kanji CG loaded board): 159 types 195 types about 6800 types 12 × 24 dots, (1.5 × 3.0 mm), 36 columns: ANK Character, dimensions (W×H), number 24 × 24 dots, (3.0 × 3.0 mm), 18 columns: ANK of columns 8 × 16 dots, (1.0 × 2.0 mm), 54 columns: ANK 16 × 16 dots, (2.0 × 2.0 mm), 27 columns: ANK FTP-627MCL401/601 n specifications Item Specification Iterface Conforms to RS232C/Centronics / USB Power supply For print head For motor For cutter Dimensions Weight Life Detection function 24 VDC average current, 0.38A (0.88A peak) (print ratio: 12.5%, print speed 100mm/sec.) MCL601 24 VDC average current TBD A (TBD A peak) MCL401 24 VDC ±5%, 1 A maximum MCL601 24 VDC ±5%, 1.1 A maximum MCL401 24 VDC ±5%, 1 A maximum MCL601 24 VDC ±5%, 1.1 A maximum For logic 4.75 to 5.25 VDC ± 5%, 0.1 A maximum Mechanism with cutter 81.2 x 42.2 x 21.8 mm (WxDxH) Interface board 70 x 60 x 12 mm (WxDxH) Mechanism with cutter Approximately 97g Interface board Approximately 25g Head Cutter Operating environment MCL401 Pulse resistance: 50 million pulses/dot (print ratio: 25%). MCL401 Abrasion resistance: paper traveling distance 50km MCL601 Abrasion resistance: paper traveling distance 100km MCL401 500,000 cuts MCL601 1,000,000 cuts Platen 5,000 times (open/close) Operating temperature* 0ºC to +50ºC Operating humidity 20 to 85% RH (no condensation) Storage temperature -20ºC to +60ºC (paper not included) Storage humidity 5 to 95% RH (no condensation) Head temperature detection Detected by thermistor Paper out/mark detection Detected by photo-interruptor Platen release Detected by sliding switch Recommended thermal sensitive paper High sensitive paper TF50KS-E4 (Nippon paper) Standard paper TF60KS-E (Nippon paper), FTP-020PU001 (58mm) PD150R (Oji paper) FTP-020PU701 (58mm) Medium life storage paper TF60KS-F1 (Nippon paper) FTP-020P0102 (58mm) PD170R (Oji paper) P220VBB-1 (Mitsubishi paper) Long life storage paper PD160R (Oji paper) AFP-235 (Mitsubishi paper) TP50KJ-R (Nippon paper) HA220AA (Nippon paper) *+5˚C to +40˚C printing density assurance rance. FTP-627MCL401/601 n function of interface board Item Item 1. Test print function 8. Cutter trouble detect 2. Paper out detection 9. Motor power saving function 3. Paper near end detection 10. Mark detection function 4. Paten open detection 11. MCU operation abnormality detection 5. Thermal head temperature abnormality detection 12. Power ON/OFF sequence protection 6. Blow-out fuse detection 13. Motor over-current protection 7. Head voltage abnormality detection 14. Hardware timer n dimensions 1. Printer mechanism FTP-627MCL401/601 68.4 13.1 21.8 22.1 13.9 (14.4 MAX.) 25 44 27.7 (50~200) 1.6 28.3 (29.3MAX.) 5.4 Ø1.4 7.5 60 81.2 44 ° 10.7 Unit: mm Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specified). 2. Platen unit (lever, platen, etc) moves by approximately 0.7mm toward paper insertion direction when platen is open. FTP-627MCL401/601 2. Interface board FTP-627DSL291R (70.0) 63.5 3.25 3.25 50.5 1.45 1.0 4.0 25.5 24 CN4 30 29 2 3ѯ3.2 CN6 6 CN2 17.5 13.5 1.2 2.25 3.25 53.5 42.0 FG¯3.2 CN7 3.25 8 1.25 34.5 1.6 7 49.5 (60.0) CN8 2 8 CN Note: all dimensions are nominal value () means just reference The mounting height is the max. Unit: mm FTP-627MCL401/601 n INTERFACE board ftp-627dsl601 Series Connectors on Control Board Name Functions Remarks Note CN1 +24V power supply connector Connection for +24V power supply CN2 RS-232C Connection for serial interface CN3 USB I/F connector Connection for USB interface CN4 Connection for thermal head + paper feed motor 2-inch, 30 pin - CN5 Cutter connector Connection for paper cutter CN6 Operation panel connector Connection for operation panel *1 CN7 Near end sensor connector Connection for near end switch *2 CN8 - CN9 Logic power connector CN10 Head/motor connector Note: Connection for +5V power Supply Connection for thermal head & paper feed motor 2-inch, 24 pin *1: Option *2: Depends on specification FTP-627MCL401/601 FTP-627MCL401 1. Connector (FPC) specification (CN3/CN10) (1) Connector Mechanical unit side: FPC connector Remote side (housing site): 52610-2490 (made by Molex) (2) Pin assignment on the mechanical side No Signal I/ O Content s 1 PH K — 2 VSE N I Ground power supply for paper sensor 3 PH E O Photointerrupter (Emittor) 4 VH I Head drive power 5 DI I Data input 6 STB 2 I Print enable signal 2 7 STB 3 I Print enable signal 3 8 VD D I Logic Power 9 GN D — Head ground 10 GN D — Head ground 11 GN D — Head ground 12 TH O Thermistor 13 STB 1 I Print enable signal 1 14 LAT I Data Latch 15 CL K I Clock 16 VH I Head drive power 17 VH I Head drive power 18 SW — Platen open switch 19 SW — Platen open switch 20 MT/ A I Motor excite signal A 21 MT/ A I Motor excite signal A 22 MT/ B I Motor excite signal B 23 MT/ B I Motor excite signal B 24 NC — Photointerrupter (Cathode) Not connected FTP-627MCL401/601 FTP-627MCL601 1. Connector (FPC) specification (CN4) (1) Connector Mechanical unit side: FPC connector Remote side (housing site): 52610-3071 (made by Molex) (2) Pin assignment on the mechanical side No. Symbol Signal Name 1 PHK 2 VSEN 3 PHE 4 VH Head drive power 5 VH Head drive power 6 VH Head drive power 7 DI Data in 8 STB2 Strobe 2 9 STB3 Strobe 3 Cathode for photo interrupter Paper sensor power Emitter for photo interrupter 10 Vdd Logic power 11 GND Head ground 12 GND Head ground 13 GND Head ground 14 GND Head ground 15 GND Head ground 16 GND Head ground 17 TM Thermistor 18 NC NC 19 STB1 20 LAT Data latch 21 CLK Clock 22 VH Head drive power 23 VH Head drive power 24 VH Head drive power 25 SW Platen switch 26 SW Platen switch 27 MT/A Excitation signal A 28 MT/A Excitation signal A 29 MT/B Excitation signal B 30 MT/B Excitation signal B Strobe 1 FTP-627MCL401/601 Sensor (Photointerruptor) Platen unit Thermal head Motor FPC Connect terminal: surface side Connector No 24, 23, .....................2,1 (FPC pin numbers) 2. Cutter (CN4/CN5) Connector on control circuit side: 52610-0890 Molex or equivalent No. Signal I/O Contents No. Signal I/O Contents 1 VSEN I Paper sensor power 2 PHE O Photo interruptor (emittor) 3 PH K O Photo interruptor (cathode) 4 MT/A I Motor excite signal A 5 MT/A I Motor excite signal A 6 MT/B I Motor excite signal B 7 MT/B I Motor excite signal B 8 NC — Not connected Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://us.fujitsu.com/printers/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. December 21, 2007