NHD-24064WG-ATFH-VZ# Graphic Liquid Crystal Display Module NHD24064WGATFHVZ#- Newhaven Display 240 x 64 Pixels Display Type: Graphic Model White LED Backlight FSTN Positive Transflective, 6:00 Optimal View, Wide Temperature With Built-in Negative Voltage Supply RoHS Compliant Newhaven Display International, Inc. 2661 Galvin Dr. Elgin IL, 60124 Ph: 847-844-8795 Fax: 847-844-8796 www.newhavendisplay.com [email protected] [email protected] Document Revision History Revision 0 1 2 3 4 5 Date 2/28/08 4/19/10 5/13/10 11/16/10 5/4/2012 5/6/2013 6 7 10/31/16 1/17/17 Description Initial Release User guide reformat Updated Backlight Supply Voltage and Current Pin description update Optical characteristics updated Electrical and optical characteristics updated. Wiring diagram and mechanical drawing updated. Font table added. Mechanical Drawing, Electrical & Optical Char. Updated PCB Redesign Functions and Features • • • • • 240 x 64 pixels Built-in RA6963 controller +5.0V Power Supply 1/64 duty RoHS Compliant [2] Changed by BE MC AK AK JN SB SB Mechanical Drawing 2 Y R A T E I 3 4 176.0 13.3 23.5 154.6 133.0(VA) 26.42 127.16(AA) 13.0 33.88(AA) 65.0±0.5 54.0 52.6 39.0(VA) B PIN 3 K1 5D-SL001-03 182.0 ± 5.0 (B/L-Cable Length) C O R 190.0±5.0 P Notes: 1. Driver: D 2. Voltage: 3. Display Mode: 4. Optimal View: 5. Backlight: 6. Driver IC: 1 R P 4- 3.5 PTH 4- 7.5PAD 1/64 Duty, 1/9 Bias 5V VDD, 12.5V VLCD FSTN Positive / Transflective 6:00 White LED RA6963 2 A 7.7 240*64 DOTS A2 K2 Date 12.3Max A1 PIN 1 6 Description P2.54*9=22.86 13.0 15.56 13.0 A 5.5 6.2 180.0±0.5 2.0 5 Rev A3 K3 Pin Assignment 4.13 2.54 3.7(MAX) Inductor 1.6 20- 1.0 PTH 20- 1.8 PAD 0.53 0.49 RED LINE A1 A2 K2 K1 0.53 0.49 1 DOT SIZE WHITE LINE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 FG VSS B VDD V0 /WR /RD /CE C/D VEE(NC) /RESET C DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 D FS NC(VEE) Unit mm Component Side Gen. Tol. ±0.3 3 4 Date 01/17/17 5 Part Number: NHD-24064WG-ATFH-VZ# 6 The information contained herein is the exclusive property of Newhaven Display International, Inc. and shall not be copied, reproduced, and/or disclosed in any format without permission. [3] Pin Description and Wiring Diagram Pin No. 1 2 3 4 5 6 7 8 9 10 11~18 19 20 A K Symbol FGND VSS VDD V0 /WR /RD /CE C/D VEE RESET DBO~DB7 FS NC LED+ LED- External Connection Power Supply Power Supply Power Supply Adj. Power Supply MPU MPU MPU MPU Power Supply MPU MPU MPU Power Supply Power Supply Function Description Frame Ground Ground Power supply for logic (+5.0V) Power supply for contrast (approx. -7V) Active LOW Write signal Active LOW Read signal Active LOW chip enable Register Select signal C/D=0: DATA C/D=1: COMMAND Negative voltage output (-16V) Active LOW reset signal 8-bit Bi-directional data bus Font Select: 1=6x8 fonts, 0=8x8 fonts No Connect Backlight Anode (+3.5V) Backlight Cathode (Ground) Recommended LCD connector: 2.54mm pitch pins Backlight connector: JST-XHP-3 Mates with: B 3B-XH-A [4] Electrical Characteristics Item Operating Temperature Range Storage Temperature Range Supply Voltage Supply Current Supply for LCD (contrast) “H” Level input “L” Level input “H” Level output “L” Level output Backlight Supply Current Backlight Supply Voltage Backlight Lifetime Symbol TOP TST VDD IDD VLCD VIH VIL VOH VOL Condition Absolute Max Absolute Max VDD = 5.0V TOP = 25°C - Min. -20 -30 4.75 8 12.1 VDD - 2.2 VSS VDD - 0.3 VSS Typ. 5.0 16 12.5 - Max. +70 +80 5.5 33 12.9 VDD 0.8 VDD 0.3 Unit ⁰C ⁰C V mA V V V V V ILED VLED - ILED = 80mA ILED = 80mA 3.2 - 80 3.5 50,000 100 3.8 - mA V Hrs. Symbol ϕY+ ϕYθXθX+ CR TR TF Condition Min. 2 - Typ. 30 60 45 45 5 200 250 Max. 300 350 Unit ⁰ ⁰ ⁰ ⁰ ms ms *The LED of the backlight is driven by current drain; drive voltage is for reference only. Drive voltage must be selected to ensure backlight current drain is below MAX level stated. Optical Characteristics Optimal Viewing Angles Item Top Bottom Left Right Contrast Ratio Response Time Rise Fall CR ≥ 2 TOP = 25°C Controller Information Built-in RA6963 controller. Please download specification at http://www.newhavendisplay.com/app_notes/RA6963.pdf [5] Table of Commands [6] Timing Characteristics [7] Built-in Font Table [8] Example Initialization Program void command(int A) { P1 = A; ID = 1; CE = 0; WRT = 0; WRT = 1; CE = 1; } void data(int A) { P1 = A; ID = 0; CE = 0; WRT = 0; WRT = 1; CE = 1; } void init() { RST = 1; RDD = 1; F_S = 1; data(0x00); data(0x00); commnd(0x40); data(0x00); data(0x40); command(0x42); data(0x1E); data(0x00); command(0x41); data(0x1E); data(0x00); command(0x43); command(0x80); } //Command //Data //Set Text Home Address //Low Address Columns //High Address //Set Graphic Home Address //Low Address Columns //High Address //Set Text Area //Low Address Columns //High Address //Set Graphic Areaa //Mode Set to 'OR' mode [9] Quality Information Test Item Content of Test High Temperature storage Endurance test applying the high storage temperature for a long time. Endurance test applying the low storage temperature for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the low thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal with high humidity stress for a long time. Endurance test applying the electric stress (voltage & current) during a cycle of low and high thermal stress. Endurance test applying vibration to simulate transportation and use. Low Temperature storage High Temperature Operation Low Temperature Operation High Temperature / Humidity Operation Thermal Shock resistance Vibration test Static electricity test Test Condition Endurance test applying electric static discharge. Note 1: No condensation to be observed. Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH. Note 3: Test performed on product itself, not inside a container. 2 -30⁰C , 96 Hrs. 1,2 +70⁰C 96 Hrs. 2 -20⁰C , 96 Hrs. 1,2 +60⁰C , 90% RH , 96 Hrs. 1,2 -20⁰C,30min -> 25⁰C,5min -> 70⁰C,30min = 1 cycle 10 cycles 10-55Hz , 1.5mm amplitude. 60 sec in each of 3 directions X,Y,Z For 15 minutes VS=±800V, RS=330Ω, CS=150pF 10 Times Precautions for using LCDs/LCMs See Precautions at www.newhavendisplay.com/specs/precautions.pdf Warranty Information and Terms & Conditions http://www.newhavendisplay.com/index.php?main_page=terms [10] Note +80⁰C , 96 Hrs. 3