MACOM DMVF400PK2.5 Tyco electronics content Datasheet

C
O
N
WIRE AND HARNESS ID PRODUCTS
T
E
N
T
S
3
Heat Shrink/Cable Markers
Performance Labels
Self-Laminating Labels
Pre-Printed Wire and Cable Markers
LABEL ID PRODUCTS
86
Product Code Cross Reference
Thermal Transfer Labels
Dot Matrix Labels
Laser Labels
HARDWARE/SOFTWARE
134
Printers
Scanners and Imagers
Laser Marking Systems
Ribbons
Software
Application Systems
SPECIALTY PRODUCTS
164
RFID
Pre-Print Services
Permark®
Rail — Signal Products
Tube and Pipe ID Labels
REFERENCE
Printer/Material/Ribbon Cross Reference
180
Master Material Specification Chart
182
Industry Icon Key
186
Part Number Index
187
1
Engineering Notes
2
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
TMS-SCE Military Grade Sleeves . . . . . . . .4
HT-SCE High Temperature Sleeves . . . . . .6
HX-SCE Low Fire Hazard Sleeves . . . . . . .8
D-SCE Fluid Resistant Sleeves . . . . . . . . .12
NBC-SCE Nuclear, Biological and Chemical
Resistant Sleeves . . . . . . . . . . . . . . . . . . . . .14
RPS Commercial Grade Sleeves . . . . . . .16
TMS-CCUV UV Resistant Oversleeves . .18
CM-SCE Polyolefin Tags . . . . . . . . . . . . . . .20
HTCM-SCE High Temp Tie-on Tags . . . .22
HLX Low Fire Hazard Tie-on Tags . . . . . .24
HLX-NEL Low Fire Hazard Tie-On Tags .26
HL Tie-On Tags . . . . . . . . . . . . . . . . . . . . . . .28
NMX Flame Retardant
Polyaramid Tags . . . . . . . . . . . . . . . . . . . . . .30
MultiMark . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
iMC Snap-on Cable Clip . . . . . . . . . . . . . . .34
iKC/iKB Tie-On Cable Clip . . . . . . . . . . . . .36
PERFORMANCE LABELS
VF/NPVF/VF-130 Polyvinyl Fluoride . .38
RMK-6 Epoxy Coated Polyester . . . . . . .40
RMK Epoxy Coated Polyester . . . . . . . . .42
TTP Polyester . . . . . . . . . . . . . . . . . . . . . . . . .44
HPK Polypropylene . . . . . . . . . . . . . . . . . . .46
Wire and Harness ID Products
HEAT SHRINK/CABLE MARKERS
SELF-LAMINATING LABELS
SB Thermal Transfer Vinyl . . . . . . . . . . . . .48
SP Self Laminating Polyester . . . . . . . . . .50
PVF Thermal Transfer Polyvinyl
Fluoride . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
TW Dot Matrix Vinyl . . . . . . . . . . . . . . . . . .54
PV Dot Matrix Polyvinyl Fluoride . . . . . . .56
LSR Polyester Laser Printable . . . . . . . . .58
CSL Polyester Laser Printable . . . . . . . . .60
TKM Self-writable, Self-laminating
Label Booklet . . . . . . . . . . . . . . . . . . . . . . . . .62
Label Dimensions . . . . . . . . . . . . . . . . . . . . .64
TEK Vinyl Fabric Labels . . . . . . . . . . . . . . .66
CMD Label Dispenser . . . . . . . . . . . . . . . . .68
WCD Label Dispenser . . . . . . . . . . . . . . . . .70
PRE-PRINTED WIRE AND CABLE MARKERS
K-Type Cable Markers . . . . . . . . . . . . . . . . .72
G-Type Cable Markers . . . . . . . . . . . . . . . . .74
Z-Type Push On Wire Markers . . . . . . . . .76
V-Type Cable Markers . . . . . . . . . . . . . . . . .78
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
O-Type Cable Markers . . . . . . . . . . . . . . . . .80
Snap On Markers . . . . . . . . . . . . . . . . . . . . .82
CWM Wire Marker Cards . . . . . . . . . . . . .84
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
3
Wire and Harness ID Products
Heat-Shrink/Cable Markers
TMS-SCE Military grade heat shrinkable wire identification sleeves
TMS-SCE marker sleeves are designed to meet the wire and cable
marking needs of manufacturers with high performance
requirements. Made from durable, flame retardant, radiationcrosslinked heat-shrinkable polyolefin, TMS-SCE marker sleeves
can be used in a wide variety of applications. All TMS-SCE meet the
performance requirements of SAE-ASM-DTL-23053/5 class 1.
TMS-SCE-2X meets all of the requirements of SAE-AMS-DTL23053/5 classes 1 and 3. The marks are permanent immediately
after printing and remain legible even when exposed to abrasion,
aggressive cleaning solvents, and military fuels and oils. The
sleeves meet the mark permanence requirements of SAE
AS81531 4.6.2 and MIL-STD-202 both before and after
shrinking.
Both 2:1 and 3:1 shrink ratios are available. The 2:1 products
provide a thick, rugged sleeve wall and are particularly easy to
handle. The lightweight 3:1 products provide extremely fast
shrinking and cover a wider range of wire diameters, thus
simplifying inventory.
The marker sleeves are designed to be printed by computer-driven
dot matrix or thermal transfer printers, providing several
advantages in terms of reduced errors, cycle time and cost.
Supplied in a thin, flat “ladder” format, the sleeves are held
horizontally between two hole-punched polyester strips. This
configuration feeds directly from the storage box into a Tyco
Electronics recommended printer. Tyco Electronics recommended
ribbons should always be used. The ladder format provides
automatic kitting of the marker sleeves in the desired sequence. A
standard heat gun with reflector is used to shrink the sleeves onto
the wire or cable.
Temperature rating
Operating temperature range
–55°C to +135°C
–67°F to +275°F
Minimum recovery temperature
+85°C
+185°F
Maximum storage temperature
+40°C
+104°F
Specifications/approvals
Tyco Electronics
RW 2511
TTDS-023
Military
SAE-AMS-DTL-23053/5 class1 and 3 (TMS-SCE-2X)
SAE-AMS-DTL-23053/5 class 1 (TMS-SCE)
SAE AS81531 4.6.2, MIL-STD-202 Method 215J
Industry
UL Recognized – Standard 224, file E35586
(TMS-SCE-2X is UL224-VW1 rated. TMS-SCE is UL224all tube flame test rated)
CSA Certified – File 31929
Heat Shrink/Cable Markers
Features and benefits
4
Printer information
Permanent identification sleeves
Computer-printable
T200 Series (thermal transfer, low volume)
Lightweight for aerospace applications
T312M (thermal transfer)
Military specification material and print performance
Tyco Electronics printer
Tyco Electronics ribbon
AM6310 (dot matrix)
1892BK04-RIBBON (dot matrix)
TMS-101-RIBBON-4RPSCE (thermal transfer for T208M)
TMS-RJS-RIBBON-4RPSCE (thermal transfer for T312M))
2:1 and 3:1 shrink ratio
CSA Certified
UL Recognized, VW all flame tubing test rated
Part numbering system
Quick recovery for heat sensitive areas
TMS-SCE - 2X -1K- 1/ 8 - 2.0-S1-9
Color (white or yellow)
Scoring (optional)
Sleeve length
(2.0" nominal) (omit for 2X)
Inside diameter, as
supplied ( inches)
Standard Pack
(1,000 pieces)
2X is optional (2:1 shrink
ratio: if left out, product
will be 3:1)
Product family
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Ordering information
50mm
(nom )
SOG-ER33-3 BT-M
D
SOG-ER32-3 BT-M
d
SOG-ER13-3 BT-M
Available sizes and formats
Inside diameter
Expanded
Recovered
D (minimum)
d (maximum)
Ordering
description
Recommended
use range
Recovered wall
thickness
mm inches
mm
inches
Weight
mm
inches
mm
inches
TMS-SCE-1K- 3/32-2.0 - <color>
2.36
0.093
0.79
0.031
0.81 - 1.90
0.032 - 0.075
0.53 ± 0.08
0.021 ± 0.003
TMS-SCE-2X-1K- 3/32 - <color>
2.36
0.093
1.17
0.046
1.27 - 1.90
0.050 - 0.075
0.64 ± 0.08
0.025 ± 0.003
2.04
TMS-SCE-1K- 1/8-2.0 - <color>
3.18
0.125
1.07
0.042
1.11 - 2.66
0.044 - 0.105
0.58 ± 0.08
0.023 ± 0.003
2.03
TMS-SCE-2X-1K- 1/8- <color>
3.18
0.125
1.58
0.062
1.75 - 2.66
0.069 - 0.105
0.64 ± 0.08
0.025 ± 0.003
2.75
TMS-SCE-1K- 3/16-2.0 - <color>
4.75
0.187
1.57
0.062
1.75 - 4.06
0.069 - 0.160
0.58 ± 0.08
0.023 ± 0.003
2.68
TMS-SCE-2X-1K- 3/16- <color>
4.75
0.187
2.36
0.093
2.54 - 4.06
0.100 - 0.160
0.64 ± 0.08
0.025 ± 0.003
3.62
(g/10 pcs.)
1.50
TMS-SCE-1K- 1/4-2.0 - <color>
6.35
0.250
2.11
0.083
2.31 - 5.46
0.091 - 0.215
0.58 ± 0.08
0.023 ± 0.003
3.51
TMS-SCE-2X-1K- 1/4- <color>
6.35
0.250
3.18
0.125
3.81 - 5.46
0.150 - 0.215
0.64 ± 0.08
0.025 ± 0.003
5.94
TMS-SCE-1K- 3/8-2.0 - <color>
9.53
0.375
3.18
0.125
3.47 - 8.12
0.137 - 0.320
0.61 ± 0.08
0.024 ± 0.003
5.04
TMS-SCE-2X-1K- 3/8- <color>
9.53
0.375
4.75
0.187
5.59 - 8.12
0.220 - 0.320
0.64 ± 0.08
0.025 ± 0.003
8.50
TMS-SCE-1K- 1/2-2.0 - <color>
12.70
0.500
4.22
0.166
4.64 - 10.79
0.183 - 0.425
0.61 ± 0.08
0.024 ± 0.003
6.81
TMS-SCE-2X-1K- 1/2- <color>
12.70
0.500
6.35
0.250
6.99 - 10.79
0.275 - 0.425
0.64 ± 0.08
0.025 ± 0.003
11.45
TMS-SCE-1K-- 3/4-2.0 - <color>
19.05
0.750
6.35
0.250
6.99 - 16.25
0.275 - 0.640
0.61 ± 0.08
0.024 ± 0.003
12.03
TMS-SCE-2X-1K- 3/4- <color>
19.05
0.750
9.53
0.375
10.16 - 16.25
0.400 - 0.640
0.76 ± 0.08
0.030 ± 0.003
20.63
TMS-SCE-1K-1-2.0 - <color>
25.40
1.000
8.46
0.333
9.29 - 21.59
0.366 - 0.850
0.64 ± 0.08
0.025 ± 0.003
15.35
TMS-SCE-1K-11/2-2.0 - <color>
38.10
1.500
19.05
0.750
20.95 - 33.02
0.825 - 1.300
0.51 ± 0.08
0.020 ± 0.003
27.51
TMS-SCE-1K-2-2.0 - <color>
50.80
2.000
25.40
1.000
27.94 - 44.95
1.100 - 1.750
0.64 ± 0.08
0.025 ± 0.003
47.27
19.05 0.750
22.32 - 50.80
TMS-SCE-1K-21/4-2.0 - <color> 57.15 2.250
Total width as supplied 90.18 mm (3.550 inches) including tape and carrier width.
0.880 - 2.000
0.76 ± 0.08
0.030 ± 0.003
42.06
Options
Prescoring
Package sizes
Colors
Perforated score to produce multiple markers from each sleeve.
Number of prescores
1 prescore
2 prescores
3 prescores
Code
S1
S2
S3
Standard
1K - 1000-piece packs
Nonstandard
Smaller and larger pack sizes are available. Please contact Tyco Electronics.
Standard
Yellow
Code
4
White
9
Nonstandard
Red
Pink
Orange
Green
Blue
Violet
Gray
Black
Code
2
2L
3
5
6
7
8
0
Note: 3:1 products yellow and white meet the color requirements of MIL-STD-104 class 1. Otherwise colors are pastel for print contrast.
Ordering information:
Specify product name, pack size, sleeve size, prescore format, and color.
Ordering example:
TMS-SCE-1K-1/8-2.0-S1-9 (scored once)
TMS-SCE-2X only available in white
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Wire and Harness ID Products
TMS-SCE Military grade heat shrinkable wire identification sleeves
Heat Shrink/Cable Markers
Heat-Shrink/Cable Markers
5
Wire and Harness ID Products
Heat-Shrink/Cable Markers
HT-SCE High temperature, low outgassing heat-shrinkable wire identification sleeves
HT-SCE wire markers are designed for use in high temperature
applications or where extreme resistance to fuels, lubricants and
cleaning solvents is required. They are also ideal for applications in
which low-vacuum outgassing is of high importance. The marker
sleeves are made of highly flame retardant, heat-shrinkable fluoropolymer tubing.
HT-SCE markers are supplied as a thin, flat “ladder” of sleeves held
horizontally between two polyester strips. This configuration feeds
directly from the storage box into standard Tyco Electronics
recommended printers, with no modifications necessary. A strip of
adhesive tape on each side of the sleeves holds them securely in
place for printing and kitting, yet the sleeves pull easily from the
carrier strips. A standard heat gun with reflector is used to shrink
the sleeves onto the wire or cable to achieve a permanent mark.
After shrinking, HT-SCE markers meet the print performance
requirements of SAE AS81531 4.6.2 and MIL-STD-202. HT-SCE
markers are supplied in boxes of 1000 sleeves and are available
in nine diameter sizes. These cover substrates from 0.8mm to
34.0mm. Because of this versatility, customers need not carry a
large inventory of markers.
Features and benefits
Permanent identification sleeves
High continuous operating temperature
Extreme fluid resistance
Low-vacuum outgassing
Wide range of sleeve sizes for several wire
and bundle diameters
Heat Shrink/Cable Markers
6
Temperature rating
Operating temperature range
–55°C to +225°C
–67°F to +437°F
Minimum recovery temperature
+200°C
+392°F
Maximum storage temperature
+40°C
+104°F
Specifications/approvals
Tyco Electronics
Military
RW 2512
TTDS-020
SAE AS 81531 4.6.2
MIL-STD-202 Method 215J
Printer information
Tyco Electronics printer
T312M (thermal transfer)
Tyco Electronics ribbon
TMS-RJS-RIBBON-4HT (thermal transfer)
Part numbering system
HT-SCE - 1K-1/4 - 2.0 - S1 - 0
Color
Scoring (optional)
Sleeve length (inches)
Expanded inside diameter (inches)
Pack size
Product family
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
HT-SCE High temperature, low outgassing heat-shrinkable wire identification sleeves
Ordering information
50mm
(nom )
SOG-ER33-3 BT-M
D
SOG-ER32-3 BT-M
d
SOG-ER13-3 BT-M
Available sizes and formats
Inside diameter
Ordering
description
D (min)
As supplied
d (max)
After recovery
Recommended
use range
mm
inches
mm
inches
HT-SCE-1K- 3/32 -2.0- <color>
2.36
0.093
0.79
0.031
0.81 - 1.90
HT-SCE-1K - 1/8 -2.0- <color>
3.18
0.125
1.58
0.062
1.75 - 2.66
0.069 - 0.105
HT-SCE-1K- 3/16 -2.0- <color>
4.75
0.187
2.36
0.093
2.54 - 4.06
0.100 - 0.160
mm
inches
0.032 - 0.075
HT-SCE-1K- 1/4 -2.0- <color>
6.35
0.250
3.18
0.125
3.40 - 6.00
0.134 - 0.236
HT-SCE-1K- 3/8 -2.0- <color>
9.53
0.375
4.75
0.187
5.30 - 8.10
0.209 - 0.319
HT-SCE-1K- 1/2 -2.0- <color>
12.70
0.500
6.35
0.250
6.60 - 11.40
0.260 - 0.449
HT-SCE-1K- 3/4 -2.0- <color>
18.00
0.709
9.00
0.354
9.90 - 15.30
0.390 - 0.602
HT-SCE-1K-1-2.0- <color>
25.40
1.000
12.70
0.500
13.30 - 23.00
0.524 - 0.906
HT-SCE-1K-11/2 -2.0- <color>
38.10 1.500
19.05 0.750
Total width as supplied 90.18 mm (3.550 inches) including tape and carrier width.
20.95 - 34.00
0.825 -1.339
Wire and Harness ID Products
Heat-Shrink/Cable Markers
Options
Perforated score to produce multiple marker sleeves from each HT-SCE sleeve
Number of prescores
1 prescore
2 prescores
3 prescores
Code
S1
S2
S3
Package size
Standard
1K - 1000 piece packs
Nonstandard
Larger pack sizes are available. Please contact Tyco Electronics.
Colors
Standard
White
Code
9
0
Nonstandard
Pink
Blue
Yellow
Code
2L
6
4
Heat Shrink/Cable Markers
Prescoring
Black
Ordering information: Specify product name, pack size, sleeve size, prescore, format and color.
Ordering example: HT-SCE-1K-1/4-2.0-S1-9
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
7
Wire and Harness ID Products
Heat-Shrink/Cable Markers
HX-SCE Low fire hazard heat-shrinkable wire identification sleeves
Thin wall, zero-halogen, low smoke, low toxicity, radiation crosslinked, UV stabilised polyolefin heat-shrinkable tubing, assembled
as cut sleeves organized in a ladder format.
Identification of wires and cables by computer-based printing onto
sleeves. Ideal for applications where limited fire hazard
characteristics are necessary. The zero halogen material coupled
with low smoke and low toxic fume emissions make this product
best used in enclosed spaces such as mass transit, marine and
industrial installations.
This product is not recommended where strain relief properties are
required.
Features and benefits
Low fire hazard properties, low smoke, low toxicity, low
flammability. Meets industry standard BS 6853 (1999)
Vehicle Category 1a
Superb print quality to give crisp clear identification
marker sleeve
Operating temperature range
–30°C to +105°C
–22°F to +221°F
Minimum recovery temperature
+120°C
+248°F
Excellent print permanence when tested in demanding
industry related fluids
Maximum storage temperature
+40°C
+104°F
Choice of printer options
Sleeve diameters from 2.4mm to 38.1mm
Sleeve length from 12.7mm to 50.8mm
Sleeves are printable on both sides for ease of
identification or inclusion of additional information
to the marker sleeve
Temperature rating
Specifications/approvals
Tyco Electronics
Heat Shrink/Cable Markers
8
Shrink ratio of 2:1 - recovers to half of the original
diameter
Military
RW 2072
TTDS-108
SAE AS81531 4.6.2
MIL-STD-202 Method 215J
Industry
BS 6853 [1999] – Vehicle Category 1a
LUL toxic fume (LUL E1042:A6 [2002})
- No halogen, O, N or S sources
Printer information
Tyco Electronics printers
T312M and T212M (thermal transfer)
Tyco Electronics ribbons
1966 - RIBBON (T312M)
T200 - RIBBON-1966 (T212M)
Part numbering system
HX-SCE- 1K-4.8 - 50 - S1 - 4
Color
Scoring (optional)
Sleeve length (mm)
Expanded inside diameter (inches)
Pack size
Product family
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
HX-SCE Low fire hazard heat-shrinkable wire identification sleeves
Ordering information
Available sizes and formats
Inside diameter
Ordering
description
D (min)
as supplied
d (max)
after recovery
Recommended
use range
mm
inches
mm
inches
2.40
0.094
1.19
0.047
1.27 - 1.90
0.050 - 0.075
HX-SCE-1K- 3.2 - 50- <color>
3.20
0.126
1.58
0.060
1.765 - 2.66
0.069 - 0.105
HX-SCE-1K- 4.8 - 50- <color>>
4.80
0.189
2.36
0.090
2.54 - 4.06
0.100 - 0.160
HX-SCE-1K- 6.4 - 50- <color>
6.40
0.250
3.18
0.125
3.81 - 5.46
0.150 - 0.215
HX-SCE-1K- 2.4 - 50- <color>
mm
inches
HX-SCE-1K- 9.5 - 50- <color>
9.50
0.375
4.75
0.187
5.59 - 8.12
0.220 - 0.320
HX-SCE-1K- 12.7 - 50- <color>
12.70
0.500
6.35
0.250
6.99 - 10.79
0.275 - 0.425
HX-SCE-1K- 19.0 - 50- <color>
19.00
0.730
9.53
0.375
10.16 - 16.25
0.400 - 0.640
HX-SCE-1K- 25.4 - 50- <color>
25.40
1.000
12.70
0.500
14.29 - 21.59
0.563 - 0.850
HX-SCE-1K- 38.1 - 50- <color>
38.10
1.500
19.05
0.750
20.95 - 33.02
0.825 - 1.300
Wire and Harness ID Products
Heat-Shrink/Cable Markers
Options
Package sizes
Perforated score to produce multiple marker sleeves from each HX-SCE sleeve.
Nonstandard
Side scored
Number of prescores
1 prescore
2 prescores
3 prescores
Code
S1
S2
S3
Standard
1K - 1000 piece packages available for all HX-SCE sizes up to 25.4
Nonstandard
2.5K - 2500 pieces available for 4.8 and 6.4 HX-SCE sizes
Heat Shrink/Cable Markers
Prescoring
5K - 5000 pieces available for 2.4 and 3.2 HX-SCE sizes
250 piece package available for all HX-SCE sizes
Colors
Standard
Yellow
White
Code
4
9
Nonstandard
Red
Green
Blue
Orange
Code
2
5
6
3
Ordering information: Specify product name, pack size, sleeve size, prescore, format and color.
Ordering example: HX-SCE-1K--50-S1-4
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
9
Wire and Harness ID Products
Heat-Shrink/Cable Markers
HX-SCE Low fire hazard heat-shrinkable wire identification sleeves
Industry Standards
Standard
Title
BS6853
Code of practice for fire precautions in the design
Interior minor use materials of mass 100g to 500g.
and construction of passenger carrying trains.
Vehicle category Ia.
Fire Safety Performance of Materials
Limited, dispered usage (abbreciation RS/EQ/I)
Railway Rolling Stock Fire behavior choice of materials
Rolling Stock Classification A1
Preventive fire protection in railway vehicles - Part 2: Fire
Dripping Classification ST2
1
London Underground Limited
Application
Standard 2-01001-002
NF F 16-101
DIN 5510-2
behavior and fire side effects of materials and parts;
Classification, Requirements and Test Methods.
2
EN50343
Railway Applications - Rolling Stock -
Tests on marking when using heat-shrinkable sleeves
Rules for installation of cabling.
1
This replaces LUL Engineering Standard E1042
2
Not including resistance to liquid fuel - not recommended for use in areas where the sleeves may be subject to extended contact from diesel fuel - Tyco Electronics D-SCE
Heat Shrink/Cable Markers
product range is designed for use in these areas.
10
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
HX-SCE Low fire hazard heat-shrinkable wire identification sleeves
Technical Information
Print Method/Ribbon:
T312M-PRINTER with 1966-RIBBON or
T212M-PRINTER with T200-1966-RIBBON
Service Temperature
-30˚C to +105˚C (-22˚F to +221˚F)
Minimum Shrink Temperature
136˚C (275˚F)
Colors:
White or yellow.
Other colors available on request.
Flammability:
Self-extinguishing (ASTM D2671 Procedure B).
Oxygen Index (BS6853: Pass 34% Min.) (BS EN ISO 4589-2 [1999]).
(AFNOR NF F 16-101 Class 12).
Dripping Classification ST2 (DIN 5510-2)
Smoke:
A0-0.017 Max. (BS 6853 [1999]
Annex D [D.8.3] Small scale test
Smoke Index Determination (IF)
Maximum 0, Smoke Class F1 (AFRNOR NF F 16-101-1988 Smoke Index)
Toxicity:
R < 1 - (BS 6853 [1999] Annex B -
Wire and Harness ID Products
Heat-Shrink/Cable Markers
AFNOR NF X 70-100 Determination of
weighted summation of toxic fume, mass
based method)
LUL Toxid Fume: No. Halogens, No. P, S or
N sources above trace level (LUL E1042: A6 [2002]) London Underground Standard 2-01001-002,
section 5.2.3 Chemical composition/toxicity)
Toxicity Index = 0.34 -
toxicity index of gasses from combustion of
organic material
Dielectric Strength:
15V/mm minimum.
Water Absorption
11% maximum after 24 hours at 23C (73˚F)
Copper Mirror Corrosion:
8% maximum after 16 hours of 150˚C (302˚F)
Longitudinal Change:
+5% to -10%.
Tensile Strength:
7MPa minimum.
Ultimate Elongation:
80% minimum.
Secant Modulus:
200MPa mimum at 2% elongation.
UL Resistance:
Tensile strength >90% & ultimate elongation
>40% or original value after 1000 hours
(ASTM G53: UVA [100% dry cycle]; UVB
[8 hours dry/4 hours wet cycle]).
Print Permanence:
ADHERENCE - Meets the requirements of
SE AS81531 4.6.2 (50 rubs).
FLUID RESISTANCE - Meets the
requirements of MIL-STD-202 method 215J.
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Heat Shrink/Cable Markers
(CEI 20-37-7-09-1997 Determination of
11
Wire and Harness ID Products
Heat-Shrink/Cable Markers
D-SCE Fluid resistant heat-shrinkable wire identification sleeves
D-SCE markers are used to identify wires and cables where
exposure to organic fluids, especially oils, is required. D-SCE
markers are designed to operate in these conditions at elevated
temperatures for extended periods of time, making them ideal in
aerospace, rail and construction industries. The D-SCE markers are
suitable for use in environments with temperatures of – 55°C to
+135°C (– 67°F to +275°F), and will provide strain relief,
insulation and protection from mechanical abuse. The 3:1 shrink
ratio markers* are assembled in a ladder format enabling sleeves to
be printed on both sides for maximum data content and
readability.
*See ordering description.
Features and benefits
Resistance to organic fluids, common fuels, lubricants
and solvents
3:1 shrink ratio
Operating temperature range
–55°C to +135°C
–67°F to +275°F
Wide range of sizes for several wire and bundle diameters
Minimum recovery temperature
+135°C
+275°F
Maximum storage temperature
+40°C
+104°F
Temperature rating
Formulated for use in aerospace, rail and construction
equipment
Dot matrix and thermal transfer printable — both print
technologies meet all specifications and approvals listed
Specifications/approvals
Tyco Electronics
RW 2519
TTDS-017
Military
SAE-AMS-DTL-23053/6, Class 1
(material and performance requirements)
SAE AS81531 4.6.2
MIL-STD-202 Method 215J
Industry
NF F 00 608 Category A and H
Heat Shrink/Cable Markers
Printer information
12
Tyco Electronics printer
AM6310 (dot matrix)
Tyco Electronics ribbon
1892BK04-RIBBON (dot matrix)
T312M (thermal transfer)
1966-RIBBON
Part numbering system
D-SCE - 5K - 3.2 - 50 - S1- 4
Color
Scoring (optional)
Sleeve length (mm)
Expanded inside diameter (mm)
Large packaging (optional)
Product family
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
D-SCE Fluid resistant heat-shrinkable wire identification sleeves
Ordering information
50mm
(nom )
SOG-ER33-3 BT-M
D
SOG-ER32-3 BT-M
d
SOG-ER13-3 BT-M
Available sizes and formats
Inside diameter
Ordering
description
D (min)
As supplied
mm inches
d (max)
After recovery
mm inches
Recommended
use range
mm inches
D-SCE-1K- 2.4-50-<color>
2.39
0.094
0.79
0.031
0.81 - 1.90
D-SCE-1K- 3.2-50-<color>
3.18
0.125
1.07
0.043
1.11 - 2.66
0.044 - 0.105
D-SCE-1K- 4.8-50-<color>
4.75
0.187
1.57
0.063
1.75 - 4.06
0.069 - 0.160
0.032 - 0.075
D-SCE-1K- 6.4-50-<color>
6.35
0.250
2.11
0.084
2.31 - 5.46
0.091 - 0.215
D-SCE-1K- 9.5-50-<color>
9.53
0.375
3.18
0.125
3.47 - 8.12
0.137 - 0.320
D-SCE-1K-12-50-<color>
12.70
0.500
4.22
0.167
4.64 - 10.79
0.183 - 0.425
D-SCE-1K-18-50-<color>
19.05
0.750
6.35
0.250
6.99 - 16.25
0.275 - 0.640
D-SCE-1K-25-50-<color>
25.40
1.000
8.46
0.333
9.29 - 21.59
0.366 - 0.850
D-SCE-1K-38-50-<color>*
38.10
1.500
19.05
0.750
20.95 - 33.02
0.825 - 1.300
Wire and Harness ID Products
Heat-Shrink/Cable Markers
* 2:1 shrink ratio
Total width as supplied 90.18 mm (3.550 inches) including tape and carrier width.
Options
Perforated score to produce multiple marker sleeves from each D-SCE sleeve.
Standard
Side scored
Number of prescores
1 prescore
2 prescores
3 prescores
Code
S1
S2
S3
Package sizes
Standard
1K - 1000 piece packages available for all D-SCE sizes
Nonstandard
Larger pack sizes are available. Please contact Tyco Electronics.
Colors
Standard
White
Code
9
4
Nonstandard
Pink
Blue
Code
2L
6
Heat Shrink/Cable Markers
Prescoring
Yellow
Ordering information: Specify product name, pack size, sleeve size, prescore, format and color.
Ordering example: D-SCE-1K-6.4-50-S2-4
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
13
Wire and Harness ID Products
Heat-Shrink/Cable Markers
NBC-SCE Nuclear, biological, chemical resistant heat-shrinkable
wire identification sleeves
Tyco Electronics NBC-SCE is used to identify wire and cables
where extreme resistance to cleaning solvents is needed. The
markers are suitable for use in wire harness systems requiring high
fluid resistance and resistance to the effects of nuclear, biological
and chemical agent exposure and decontamination. The markers
should be used with an appropriate transparent oversleeve whose
ends are sealed with an appropriate epoxy adhesive.
NBC-SCE marker sleeves are suitable for use in environments with
temperatures from –55°C to +225°C (–67°F to +437°F).
Features and benefits
Permanent identification sleeves
Computer-printable
2:1 shrink ratio
NBC application with the appropriate adhesive and oversleeve
Temperature rating
Operating temperature range
–55°C to +225°C
–67°F to +437°F
Minimum recovery temperature
+200°C
+392°F
Maximum storage temperature
+40°C
+104°F
Specifications/approvals
Tyco Electronics
RW 2514
Military
SAE AS81531 4.6.2
MIL-STD-202 Method 215J
Heat Shrink/Cable Markers
Printer information
14
Tyco Electronics printer
T312M (thermal transfer)
Tyco Electronics ribbon
TMS-RJS-RIBBON-4HT (thermal
transfer)
Part numbering system
NBC-SCE - 1K-1/4 - 2.0 - S1 - 9
Color
Scoring (optional)
Sleeve length (inches)
Expanded inside diameter (inches)
Large packaging (optional)
Product family
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
NBC-SCE Nuclear, biological, chemical resistant heat-shrinkable
wire identification sleeves
Ordering information
50mm
(nom )
SOG-ER33-3 BT-M
D
SOG-ER32-3 BT-M
d
SOG-ER13-3 BT-M
Available sizes and formats
Inside diameter
Expanded
Recovered
D (minimum)
d (maximum)
Ordering
description
Recommended
use range
mm
inches
mm
inches
NBC-SCE-1K-1/8- 2.0<color>
3.43
0.135
1.59
0.062
1.75-2.66
0.069 -0.105
0.38 ± 0.08
0.015 ± 0.003
NBC-SCE-1K-1/4- 2.0<color>
6.35
0.250
3.18
0.125
3.81-5.46
0.150-0.215
0.38 ± 0.08
0.015 ± 0.003
NBC-SCE-1K-1/2- 2.0<color>
12.70
0.500
6.35
0.250
6.99-10.79
0.275-0.425
0.38 ± 0.08
0.015 ± 0.003
NBC-SCE-1K-3/4- 2.0<color>
19.05
0.750
9.53
0.375
10.16-16.25
0.400-0.640
0.38 ± 0.08
0.015 ± 0.003
NBC-SCE-1K-1- 2.0<color>
25.40
1.000
12.70
0.500
mm
NBC-SCE-1K-1-1/2- 2.0<color> 38.10 1.500
19.05 0.750
Total width as supplied 90.18 mm (3.550 inches) including tape and carrier width.
inches
Recovered wall
thickness
mm
inches
14.70-21.50
0.578-0.846
0.43 ± 0.10
0.017 ± 0.004
20.95-33.02
0.825-1.300
0.43 ± 0.10
0.017 ± 0.004
Wire and Harness ID Products
Heat-Shrink/Cable Markers
Options
Prescoring
Perforated score to produce multiple marker sleeves from each NBC-SCE sleeve.
Number of prescores
1 prescore
2 prescores
3 prescores
Code
S1
S2
S3
Package sizes
Standard
1000 piece packages available for all NBC-SCE sizes
Colors
Standard
White
Code
9
Heat Shrink/Cable Markers
Ordering information: Please specify product name, pack size, sleeve size, prescore, format and color.
Ordering example: NBC-SCE-1K-1/8-2.0-9
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
15
Wire and Harness ID Products
Heat-Shrink/Cable Markers
RPS Commercial grade heat-shrinkable wire identification sleeves
RPS markers are heat shrinkable marking sleeves for wire and
cable identification. When RPS is printed with Tyco Electronics
recommended printers and ink ribbons, the marks remain legible,
without any post printing process, even when exposed to
abrasion, aggressive cleaning solvents, and industrial fluids.
RPS markers are designed to meet the wire identification needs of
commercial and industrial customers.
Features and benefits
Permanent identification sleeves
Computer printable
Excellent print performance
Configured for ease of kitting
Good chemical and solvent resistance
3:1 shrink ratio
CSA Certified, UL Recognized
Temperature rating
Operating temperature range
–30°C to +105°C
–22°F to +221°F
Minimum recovery temperature
+85°C
+185°F
Maximum storage temperature
+40°C
+104°F
Specifications/approvals
Tyco Electronics
Military
RW 2510
TTDS-019
SAE AS81531 4.6.2
MIL-STD-202 Method 215J
Industry
UL Recognized – standard 224,
file E35586
Heat Shrink/Cable Markers
CSA Certified – file 31929
16
Printer information
Tyco Electronics printer
AM6310 (dot matrix)
T208M (thermal transfer – low volume)
T312M (thermal transfer)
Tyco Electronics ribbon
1892BK04-RIBBON (dot matrix)
TMS-101-RIBBON-4RPSCE (thermal transfer
for T208M)
TMS-RJS-RIBBON-4RPSCE (thermal transfer
for T312M)
Part numbering system
RPS-1K-22-18/2.0-S1-9
Color
Scoring (optional)
Sleeve length (inches)
US wire gauge size
Pack size
Product family
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
RPS Commercial grade heat-shrinkable wire identification sleeves
Ordering information
50mm
(nom )
SOG-ER33-3 BT-M
D
SOG-ER32-3 BT-M
d
SOG-ER13-3 BT-M
Available sizes and formats
Inside diameter
Ordering
description
D (min)
as supplied
d (max)
after recovery
Recommended
use range
mm
inches
mm
inches
RPS-1K-22-18/2.0- <color>
3.18
0.125
1.07
0.042
1.17 - 2.66
0.046 - 0.105
RPS-1K-18-12/2.0- <color>
4.75
0.187
1.57
0.062
1.75 - 4.06
0.069 - 0.160
RPS-1K-16-10/2.0- <color>
6.35
0.250
2.11
0.083
2.31 - 5.46
0.091 - 0.215
RPS-1K-8-4/2.0- <color>
9.53
0.375
3.18
0.125
3.47 - 8.12
0.137 - 0.320
mm
inches
RPS-1K-10-2/2.0- <color>
12.70
0.500
4.22
0.166
4.64 - 10.79
0.183 - 0.425
RPS-1K-6-250/2.0- <color>
19.05
0.750
6.35
0.250
6.99 - 16.25
0.275 - 0.640
RPS-1K-1-400/2.0- <color>
25.40
1.000
8.46
0.333
9.29 - 21.59
0.366 - 0.850
RPS-1K-400-1000/2.0- <color>
38.10 1.500
19.05 0.750
Total width as supplied 90.18 mm (3.550 inches) including tape and carrier width.
20.95 - 33.02
0.825 - 1.300
Wire and Harness ID Products
Heat-Shrink/Cable Markers
Options
Prescoring
Perforated score to produce multiple marker sleeves from each RPS sleeve.
1 prescore
2 prescores
3 prescores
Code
S1
S2
S3
Package sizes
Standard
1K -1000 piece packs
Nonstandard
Smaller and larger pack sizes are available. Please contact Tyco Electronics.
Colors
Standard
White
Yellow
Code
9
4
Heat Shrink/Cable Markers
Number of prescores
Ordering information: Specify product name, pack size, sleeve size, prescore, format and color.
Ordering example: RPS-1K-22-18/2.0-S2-9
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
17
Wire and Harness ID Products
Heat-Shrink/Cable Markers
TMS-CCUV Heat-shrinkable UV protection sleeves
TMS-CCUV clear heat shrinkable sleeves are designed for over
protection of TMS System Six identification products, to give
increased protection for permanent, long-term environmental
exposure. The clear CCUV heat-shrinkable sleeves are formulated
to combine a long-term barrier to the effects of ultra-violet, with
tough resistance to abrasion and industrial fluids. They are
available in packs which match the product sizes and pack
quantities of TMS System Six heat-shrinkable identification sleeves
and cable markers.
The TMS CCUV sleeves are inherently low profile and use the
action of heat-shrink to lock in place over the previously installed
identification sleeves; except for cable markers which use a slide
fitting CCUV sleeve which is held in place by the cable ties.
The action of heat-shrink locking of the CCUV sleeves means there
is no reliance on the long term performance of adhesives to hold
the outer protection layer in place, and also gives the ability to
accommodate cables and wire bundles which may be bent or
flexed during use.
Operating temperature range
Features and benefits
Heat Shrink/Cable Markers
Temperature rating
–55°C to +150°C
–67°F to 302°F
Minimum recovery temperature
+150°C
+302°F
Maximum storage temperature
+40°C
+104°F
Specifications/approvals
Exceptional clarity and stability
Tyco Electronics
RW 2525
Added UV-resistant sleeves
Military
UL VW-1 rated
SAE-AMS-DTL-23053/18, Class 2
Not printable
Tough resistance to abrasion and industrial fluids
Heat-shrink locking in place (no reliance on adhesives)
Low profile
Accommodates bent or flexing cable/wire bundles
Can work as an NBC (nuclear, biological, chemical) System with
NBC-SCE sleeves and appropriate adhesive
Part numbering system
TMS-CCUV- SLEEVE-1- X- 65mm
Sleeve length (mm)
Color (clear for all)
Sleeve reference
Loose sleeves
CCUV sleeve
Ordering information
Before shrinking
After shrinking over TMS cable sleeve
TMS IDENT SLEEVE
D
60mmto 65mm
Wire dia.
L
After sliding over TMS cable marker
After shrinking over TMS cable marker
TMS CABLE
MARKER
TMS CABLE MARKER
32mm
Cable dia.
18
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
60mmto 65mm
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
TMS-CCUV Heat-shrinkable UV protection sleeves
Available sizes and formats
(For use with heat shrink sleeves)
Inside
diameter
minimum
mm inches
Recovered
diameter
maximum
mm inches
TMS-CCUV-SLEEVE-1-X-65mm 65
3.20
0.125
1.60
0.063
1.80-2.80
0.071-0.110
2.40
0.094
N/A
TMS-CCUV-SLEEVE-1-X-65mm 65
3.20
0.125
1.60
0.063
1.80-2.80
0.071-0.110
3.20
0.125
22-18
Sleeve
length
mm
Wire
size
diameter
mm inches
Sleeve size
expanded diameter
TMS-SCE
RPS
mm inches US Wire gauge
TMS-CCUV-SLEEVE-2-X-65mm 65
4.80
0.187
2.40
0.094
2.60-3.70
0.102-0.146
4.80
0.188
18-12
TMS-CCUV-SLEEVE-2-X-65mm 65
4.80
0.187
2.40
0.094
2.60-3.70
0.102-0.146
6.40
0.250
16-10
TMS-CCUV-SLEEVE-3-X-65mm 65
6.40
0.250
3.20
0.126
3.50-5.10
0.138-0.201
9.50
0.375
8-4
TMS-CCUV-SLEEVE-4-X-65mm 65
9.50
0.375
4.80
0.189
5.00-7.00
0.197-0.275
12.70
0.500
10-2
TMS-CCUV-SLEEVE-5-X-65mm 65
12.70
0.500
6.40
0.252
6.90-10.60
0.272-0.417
19.00
0.750
6-250
TMS-CCUV-SLEEVE-6-X-65mm 65
19.00
0.750
9.50
0.374
10.00-14.00
0.394-0.551
25.40
1.000
1-400
TMS-CCUV-SLEEVE-7-X-65mm 65
25.40
1.000
12.70
0.500
13.30-21.00
0.524-0.827
25.40
1.000
1-400
TMS-CCUV-SLEEVE-8-X-65mm 65
38.10 1.500
19.00 0.748
21.00-33.80 0.827-1.331
Some sleeve sizes may need to be recovered partially before CCUV sleeve is applied to protect them.
38.10
1.500
400-1000
(For use with cable markers to secure / protect without cable ties)
Inside
Recovered
Ordering
Sleeve
diameter
diameter
description
length
minimum
maximum
mm inches
mm inches
TMS-CCUV-SLEEVE-4-X-65mm
65
9.50
0.375
4.80
0.189
TMS-CCUV-SLEEVE-5-X-65mm
65
12.70
0.500
6.40
0.252
TMS-CCUV-SLEEVE-6-X-65mm
65
19.00
0.750
9.50
0.374
TMS-CCUV-SLEEVE-7-X-65mm
65
25.40
1.000
12.70
0.500
(For use with cable markers to protect with cable ties)
Inside
Ordering
Sleeve
diameter
description
length
minimum
mm
mm inches
TMS-CCUV-SLEEVE-9-X-32mm
32
6.40
0.250
TMS-CCUV-SLEEVE-10-X-32mm
32
12.70
0.500
Wire
size
diameter
mm inches
5.00-8.00 0.197-0.315
7.00-11.00 0.275-0.433
12.00-17.00 0.472-0.669
15.00-23.00 0.590-0.905
Recovered
diameter
maximum
mm inches
3.20 0.126
6.40 0.252
Wire
size
diameter
mm inches
Marker
height
mm
inches
6.40
0.250
6.40
0.250
12.70
0.500
12.70
0.500
Marker
height
mm
inches
N/A
6.40
0.250
N/A
12.70
0.500
(For use with NBC-SCE sleeves and adhesives sealing*)
Inside
Recovered
Wire size
Sleeve size
diameter
diameter
diameter
expanded diameter
minimum
maximum
NBC-SCE
NBC-SCE
mm inches
mm inches
mm inches
mm inches
TMS-CCUV-SLEEVE-15
76
3.20 0.125
1.60 0.063
1.80-2.80 0.071-0.110
3.20 0.125
TMS-CCUV-SLEEVE-16
76
4.80 0.187
2.40 0.094
2.60-3.70 0.102-0.146
4.80 0.188
TMS-CCUV-SLEEVE-17
76
6.40 0.250
3.20 0.126
3.50-5.10 0.138-0.201
6.40 0.250
TMS-CCUV-SLEEVE-18
76
9.50 0.375
4.80 0.189
5.00-7.00 0.197-0.275
9.50 0.375
TMS-CCUV-SLEEVE-19
76
12.70 0.500
6.40 0.252
6.90-10.60 0.272-0.417
12.70 0.500
TMS-CCUV-SLEEVE-20
76
19.00 0.750
9.50 0.374
10.00-14.00 0.394-0.551
19.00 0.750
TMS-CCUV-SLEEVE-21
76
25.40 1.000
12.70 0.500
13.30-21.00 0.524-0.827
25.40 1.000
TMS-CCUV-SLEEVE-22
76
38.10 1.500
19.00 0.748
21.00-33.80 0.827-1.331
38.10 1.500
*For use with adhesives such as S-1255-04 and S-1264 please refer to RT1012 and RT1014 for specifications and adhesive details.
Ordering
description
Sleeve
length
mm
Options
Prescoring
Not available — supplied as cut pieces.
Package Sizes
Standard
250 piece bags only
Colors
Standard
Clear only
Ordering information:
Specify product name, loose sleeve, sleeve reference, color and sleeve length.
Ordering example:
For all Heat Shrink sleeves except NBC-SCE
TMS-CCUV-SLEEVE-1-X- 65mm
For NBC-SCE
TMS-CCUV-SLEEVE-22
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Heat Shrink/Cable Markers
Ordering
description
Wire and Harness ID Products
Heat-Shrink/Cable Markers
19
Wire and Harness ID Products
Heat-Shrink/Cable Markers
CM-SCE Military grade tie-on cable marker tags
CM-SCE markers are flat, rigid, non-adhesive labels that can be
used to identify large cables and wire bundles in environments
such as military and aerospace. Marker tags are applied to cables
or wire bundles with cable ties.
Print performance meets or exceeds the requirements of
SAE AS81531 4.6.2 and MIL-STD-202.
Features and benefits
Side entry provides access to big size and wire bundles
as well as retrofit and repair capability
Highly flame-retardant
Highly resistant to abrasion, mechanical abuses, fluids,
lubricants and solvents
Ease of use: markers can be easily removed from the carrier
Easy installation: only standard cable tie-wraps
are needed to install markers. No extra steps required
Excellent print permanence when printing on the rough
side of the marker
Temperature rating
Operating temperature range
–55°C to +135°C
–67°F to +275°F
Specifications/approvals
Tyco Electronics
RW 2513
TTDS-021
Military
Mark permanence: SAE AS81531 4.6.2
Solvent resistance: MIL-STD-202
Method 215J
Industry
UL MH26328 Group PG1S2
Heat Shrink/Cable Markers
Printer information
20
Tyco Electronics printer
AM6310 (dot matrix)
T312M (thermal transfer)
Tyco Electronics ribbon
1892BK04-RIBBON (dot matrix) (dot matrix)
1966-RIBBON (thermal transfer)
Part numbering system
CM-SCE - 2.5K - 1/ 4 - 4H-9
Color
Tie-wrap holes
Markable height of marker (inches)
Pack size
Product family
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Wire and Harness ID Products
Heat-Shrink/Cable Markers
CM-SCE Military grade tie-on cable marker tags
Ordering information
Figure 1
CM-SCE- 1/4 INCH
Available sizes and formats
Ordering
description
Size
Markable
length
Recommended
use range
mm
inches
/4
6.40
0.250
50.80
2.000
5.08 – 12.50
0.200 – 0.492
/4
6.40
0.250
50.80
2.000
5.08 – 12.50
0.200 – 0.492
/4
6.40
0.250
50.80
2.000
5.08 – 12.50
0.200 –0.492
/2
12.70
0.500
50.80
2.000
12.50 and up
0.492 and up
/2
12.70
0.500
50.80
2.000
12.50 and up
0.492 and up
/2
12.70
0.500
50.80
2.000
12.50 and up
0.492 and up
/2
12.70
0.500
50.80
2.000
12.50 and up
0.492 and up
CM-SCE- 1/4 -6H- <color>
1
CM-SCE- 1/4 -4H- <color>
1
CM-SCE -TP- 1/4 - 4H- <color>*
1
CM-SCE- 1/2 - 4H- <color>
1
CM -SCE-TP- 1/2 - 4H- <color>*
1
CM-SCE- /2 - 6H- <color>
1
CM -SCE-TP- 1/2 - 6H- <color>*
1
1
Markable
height
mm
inches
mm
inches
* for thermal transfer printing
Tie-wrap holes
1
Four holes standard
1
Four holes
Six holes
Code
4H
6H
Code
Fx (substitute package size code for “x”)
/4 - inch tags
/2 - inch tags
Fanfold
Package sizes
Standard
250 pieces
Colors
Standard
White
Code
9
Nonstandard
Yellow
Code
4
Heat Shrink/Cable Markers
Options
Ordering information: Specify product name, markable height of marker, pack size, number of tie wraps and color.
Ordering example: CM-SCE--2.5K -1/4 -4H-9
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
21
Wire and Harness ID Products
Heat-Shrink/Cable Markers
HTCM-SCE High temperature, low outgassing tie-on-cable marker tags
HTCM-SCE markers are flat, rigid, non-adhesive labels that can be
used to identify large cables and wire bundles in high temperature
environments and outer space applications where low vacuum
outgassing is required. Marker tags are applied to cables or wire
bundles using cable ties.
Print performance meets or exceeds the requirements of
SAE AS81531 4.6.2 and MIL-STD-202.
Features and benefits
Side entry provides access to big size cables and wire
bundles as well as retrofit and repair capability
High temperature use
Highly flame-retardant
Highly resistant to abrasion, mechanical abuses, fluids,
lubricants and solvents
Low vacuum outgassing for outer space applications
Ease of use: markers can be easily removed from the carrier
Easy installation: only standard cable tie-wraps are
needed to install markers. No extra steps required
Excellent print permanence when printing on the rough side
of the marker
Temperature rating
Operating temperature range
–55°C to +225°C
–67°F to +437°F
Specifications/approvals
Tyco Electronics
Military
RW 2524
TTDS-022
Mark permanence: SAE AS81531 4.6.2
Solvent resistance: MIL-STD-202
Method 215J
Heat Shrink/Cable Markers
Printer information
22
Tyco Electronics printer
T312M (thermal transfer)
Tyco Electronics ribbon
TMS-RJS-RIBBON-4HT (thermal transfer)
Part numbering system
HTCM-SCE - 2.5K -1/ 4 - 4H-9
Color
Tie-wrap holes
Markable height of marker (inches)
Pack size
Product family
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
HTCM-SCE High temperature, low outgassing tie-on-cable marker tags
Ordering information
Figure 1
HTCM-SCE- 1/4 INCH
Available sizes and formats
Ordering
description
Size
Markable
height
Markable
length
Recommended
use range
mm
inches
/4
6.40
0.250
50.80
2.000
5.08 – 12.50
0.200 – 0.492
/2
12.70
0.500
50.80
2.000
12.50 and up
0.492 and up
/2
12.70
0.500
50.80
2.000
12.50 and up
0.492 and up
HTCM-SCE -TP- 1/4 - 4H- <color>
1
HTCM -SCE-TP- 1/2 - 4H- <color>
1
HTCM -SCE-TP- 1/2 - 6H- <color>
1
mm
inches
mm
inches
Wire and Harness ID Products
Heat-Shrink/Cable Markers
Tie-wrap holes
1
Four holes standard
1
Four holes
Six holes
Code
4H
6H
Code
Fx (substitute package size code for “x”)
/4 - inch tags
/2 - inch tags
Fanfold
Package sizes
Standard
250 pieces
Colors
Standard
White
Code
9
Nonstandard
Yellow
Code
4
Heat Shrink/Cable Markers
Options
Ordering information: Specify product name, markable height of marker, pack size, number of tie wraps and color.
Ordering example: HTCM-SCE - 2.5K --1/4 --4H-9
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
23
Wire and Harness ID Products
Heat-Shrink/Cable Markers
HLX Low fire hazard tie-on cable marker tags
HLX cable markers are made from zero halogen, low smoke, low
toxicity, radiation cross-linked, UV stabilized polyolefin sheet,
formed into punched organized cable markers on a paper carrier.
They are used for identification of cables and wire bundles by
computer-based printing onto markers. Markers are attached using
cable ties. HLX markers are ideal for applications where limited fire
hazard characteristics are necessary.
Features and benefits
Recommended for use where combustion of products may
endanger personnel or place delicate electronics at risk
Several printable heights and widths available
Temperature rating
Operating temperature range
–40°C to +105°C
–40°F to +221°F
Specifications/approvals
Tyco Electronics
Military
RW 2523
TTDS-013
SAE AS81531 4.6.2
MIL-STD-202 Method 215J
Industry
BS 4G 198 Part 3
ASTM D 2671
Heat Shrink/Cable Markers
Printer information
24
Tyco Electronics printer
T312M (thermal transfer)
Tyco Electronics ribbon
1966-RIBBON
Part numbering system
HLX 150 YW 1 TS 033 B
Pack size
Printable width (mm)
Format
Scoring
Color
Marker height
Product family
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Ordering information
Available sizes and formats
Ordering
description
Marker dimensions
(W x H)
mm inches
Printable area
(W x H)
mm inches
Pack
size
TS
HLX104<color>1<format>025B
45.00 x 10.40
1.800 x 0.400
25.00 x 10.40
1.000 x 0.400
1000
HLX104<color>1<format>033B
52.00 x 10.40
2.100 x 0.400
33.00 x 10.40
1.300 x 0.400
1000
HLX104<color>1<format>038B
58.00 x 10.40
2.300 x 0.400
38.00 x 10.40
1.500 x 0.400
1000
HLX104<color>1<format>050B
70.00 x 10.40
2.750 x 0.400
50.00 x 10.40
2.000 x 0.400
1000
HLX104<color>1<format>070B
90.00 x 10.40
3.500 x 0.400
70.00 x 10.40
2.750 x 0.400
1000
HLX150<color>1<format>025B
45.00 x 15.00
1.800 x 0.600
25.00 x 15.00
1.000 x 0.600
500
HLX150<color>1<format>033B
52.00 x 15.00
2.100 x 0.600
33.00 x 15.00
1.300 x 0.600
500
HLX150<color>1<format>038B
58.00 x 15.00
2.300 x 0.600
38.00 x 15.00
1.500 x 0.600
500
HLX150<color>1<format>050B
70.00 x 15.00
2.750 x 0.600
50.00 x 15.00
2.000 x 0.600
500
HLX150<color>1<format>070B
90.00 x 15.00
3.500 x 0.600
70.00 x 15.00
2.750 x 0.600
500
HLX203<color>1<format>025B
45.00 x 20.30
1.800 x 0.800
25.00 x 20.30
1.000 x 0.800
500
HLX203<color>1<format>033B
52.00 x 20.30
2.100 x 0.800
33.00 x 20.30
1.300 x 0.800
500
HLX203<color>1<format>038B
58.00 x 20.30
2.300 x 0.800
38.00 x 20.30
1.500 x 0.800
500
HLX203<color>1<format>050B
70.00 x 20.30
2.750 x 0.800
50.00 x 20.30
2.000 x 0.800
500
HLX203<color>1<format>070B
90.00 x 20.30
3.500 x 0.800
70.00 x 20.30
2.750 x 0.800
500
HLX253<color>1<format>025B
45.00 x 25.30
1.800 x 1.000
25.00 x 25.30
1.000 x 1.000
250
HLX253<color>1<format>033B
52.00 x 25.30
2.100 x 1.000
33.00 x 25.30
1.300 x 1.000
250
HLX253<color>1<format>038B
58.00 x 25.30
2.300 x 1.000
38.00 x 25.30
1.500 x 1.000
250
HLX253<color>1<format>050B
70.00 x 25.30
2.750 x 1.000
50.00 x 25.30
2.000 x 1.000
250
HLX253<color>1<format>070B
90.00 x 25.30
3.500 x 1.000
70.00 x 25.30
2.750 x 1.000
250
Options
Prescoring
Not available on these products – this should always be 1.
Package sizes
Standard
B
Colors
Standard
White
Code
WE
YW
Nonstandard
Red
Blue
Code
RD
BE
Format
TS – Thermal transfer (reel/single sided)
Printable width on marker
025
25mm (1”)
033
33mm (1.3”)
038
38mm (1.5”)
050
50mm (2”)
070
70mm (2.75”)
Yellow
Wire and Harness ID Products
HLX Low fire hazard tie-on cable marker tags
Heat Shrink/Cable Markers
Heat-Shrink/Cable Markers
Ordering information: Specify product name, marker height, color, scoring option (always 1), format, printable width, and pack size.
Ordering example: HLX150YW1TS033B
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
25
Wire and Harness ID Products
Heat-Shrink/Cable Markers
HLX-NEL Narrow Edge Leading Low fire hazard tie-on cable marker tags
HLX cable markers assembled in a Narrow Edge Leading (NEL)
format for use in the T212M printer. Ideal for use in applications
where the volume is small or wiring complexity is simple.
These markers are manufactured from the same low fire hazard
material as the standard HLX markers making them ideal in
applications where low smoke, low toxicity and zero halogen are
critical.
These markers are attached to cables, bundles, and larger wire by
cable ties.
Features and benefits
Recommended for use where combustion of products may
endanger personnel or delicate electronics
Ideal for low volume applications with T212M printer
Two formats available
Same material and approvals as standard HLX cable markers
Ideal for pre or post termination assembly
Temperature rating
Operating temperature range
–40°C to +105°C
–40°F to +221°F
Specifications/approvals
Tyco Electronics
RW 2529
TTDS-134
Industry
UL 224 (clause 14)
BS 4G 198 Part 3
ASTM D 2671
SAE AS81531 4.6.2
Heat Shrink/Cable Markers
MIL-STD-202 Method 215K
26
Printer information
Tyco Electronics printer
T212M (thermal transfer only)
Tyco Electronics ribbon
1966-RIBBON-4T200
Part numbering system
HLX 125 YW 2 NEL 60 S
Pack size
Printable width (mm)
Format
Number of markers across width
Color
Marker height (mm)
Product family
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
HLX-NEL Narrow Edge Leading Low fire hazard tie-on cable marker tags (Cont’d)
Ordering information
Available sizes and formats
Ordering
description
HLX125<color>4NEL60S
HLX125<color>2NEL60S
Marker dimensions
(W x H)
mm inches
80.00 x 12.50
80.00 x 12.50
3.15 x 0.49
3.15 x 0.49
Printable area
(W x H)
mm inches
60.00 x 10.50
60.00 x 10.50
Number of
Markers Across
12.35 x 0.40
12.35 x 0.40
4
2
Options
Package sizes
Standard
S
Colors
Standard
White
Yellow
WE
YW
Colors
NEL - Narrow edge leading
Heat Shrink/Cable Markers
Format
Wire and Harness ID Products
Heat-Shrink/Cable Markers
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
27
Wire and Harness ID Products
Heat-Shrink/Cable Markers
HL Flame retardant tie-on cable marker tags
Used to identify large cables and bundles either pre or posttermination, these flame retardant HL cable markers are suitable
for use in environments with temperatures of –55°C to +135°C
(–67°F to +275°F). The markers are easily applied with standard
cable ties.
HL markers are presented as organized markers assembled onto
either a fanfolded or reeled paper carrier for ease of selection and
kitting and are available in an extensive range of sizes.
They are available with the surface designed for either dot matrix
or thermal transfer printers.
Features and benefits
Recommended for use where de-termination of wires is not
possible for large ID wires or wire bundles
Heat resistant to +175°C for 168 hours or +250°C for 4 hours
with no deterioration in properties
Several printable widths and heights available
Non-standard color options available
Temperature rating
Operating temperature range
–55°C to +135°C
–67°F to +275°F
Specifications/approvals
Tyco Electronics
Military
TTDS-037
SAE AS81531 4.6.2
MIL-STD-202 Method 215J
Heat Shrink/Cable Markers
Industry
28
ASTM D 2671
Printer information
Tyco Electronics printer
AM 6310 (dot matrix)
Tyco Electronics ribbon
1892BK04 (dot matrix)
T312M (thermal transfer)
1892BK03 (dot matrix —
high performance)
TMS-RJS-RIBBON-4RPSCE
Part numbering system
HL 150 YW 1 NF 033 B
Pack size
Printable width (mm)
Format
Scoring
Color
Marker height
Product family
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Ordering information
WEB WIDTH
WIDTH
HEIGHT
Available sizes and formats
Ordering
description
Marker dimensions
(W x H)
mm inches
HL104<color>1<format>025B
45.00 x 10.40
1.800 x 0.400
Printable area
(W x H)
mm inches
25.00 x 10.40
1.000 x 0.400
Pack size
NF
TS
550
1000
HL104<color>1<format>033B
52.00 x 10.40
2.100 x 0.400
33.00 x 10.40
1.300 x 0.400
550
1000
HL104<color>1<format>038B
58.00 x 10.40
2.300 x 0.400
38.00 x 10.40
1.500 x 0.400
550
1000
HL104<color>1<format>050B
70.00 x 10.40
2.750 x 0.400
50.00 x 10.40
2.000 x 0.400
550
1000
HL104<color>1<format>070B
90.00 x 10.40
3.500 x 0.400
70.00 x 10.40
2.750 x 0.400
550
1000
HL150<color>1<format>025B
45.00 x 15.00
1.800 x 0.600
25.00 x 15.00
1.000 x 0.600
550
500
HL150<color>1<format>033B
52.00 x 15.00
2.100 x 0.600
33.00 x 15.00
1.300 x 0.600
550
500
HL150<color>1<format>038B
58.00 x 15.00
2.300 x 0.600
38.00 x 15.00
1.500 x 0.600
550
500
HL150<color>1<format>050B
70.00 x 15.00
2.750 x 0.600
50.00 x 15.00
2.000 x 0.600
550
500
HL150<color>1<format>070B
90.00 x 15.00
3.500 x 0.600
70.00 x 15.00
2.750 x 0.600
550
500
HL203<color>1<format>025B
45.00 x 20.30
1.800 x 0.800
25.00 x 20.30
1.000 x 0.800
550
500
HL203<color>1<format>033B
52.00 x 20.30
2.100 x 0.800
33.00 x 20.30
1.300 x 0.800
550
500
HL203<color>1<format>038B
58.00 x 20.30
2.300 x 0.800
38.00 x 20.30
1.500 x 0.800
550
500
HL203<color>1<format>050B
70.00 x 20.30
2.750 x 0.800
50.00 x 20.30
2.000 x 0.800
550
500
HL203<color>1<format>070B
90.00 x 20.30
3.500 x 0.800
70.00 x 20.30
2.750 x 0.800
550
500
HL253<color>1<format>025B
45.00 x 25.30
1.800 x 1.000
25.00 x 25.30
1.000 x 1.000
300
250
HL253<color>1<format>033B
52.00 x 25.30
2.100 x 1.000
33.00 x 25.30
1.300 x 1.000
300
250
HL253<color>1<format>038B
58.00 x 25.30
2.300 x 1.000
38.00 x 25.30
1.500 x 1.000
300
250
HL253<color>1<format>050B
70.00 x 25.30
2.750 x 1.000
50.00 x 25.30
2.000 x 1.000
300
250
HL253<color>1<format>070B
90.00 x 25.30
3.500 x 1.000
70.00 x 25.30
2.750 x 1.000
300
250
Options
Prescoring
Not available on these products – this should always be 1.
Package sizes
Standard
B
Colors
Standard
White
Code
WE
YW
Nonstandard
Red
Blue
Code
RD
BE
Format
NF – Dot matrix printing (fanfold/single sided)
Printable Width On Marker
025
25mm (1”)
033
33mm (1.3”)
038
38mm (1.5”)
050
50mm (2”)
070
70mm (2.75”)
Yellow
TS – Thermal transfer (reel/single sided)
Wire and Harness ID Products
HL Flame retardant tie-on cable marker tags
Heat Shrink/Cable Markers
Heat-Shrink/Cable Markers
Ordering information: Specify product name, marker height, color, scoring option (always 1), format, printable width, and pack size.
Ordering example: HL150YW1NF033B
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
29
Wire and Harness ID Products
Heat-Shrink/Cable Markers
NMX Flame retardant, light weight tie-on cable marker tags
NMX cable marker tags are used for identification of cables and
wire bundles by computer-based printing onto markers. The
markers are attached using cable ties. They are ideal for aerospace
and other cases where resistance to harsh environments and light
weight are important.
Features and benefits
Extremely light weight
Ultimate tensile strength and tear resistance
Flame retardant
Resistant to several avionics fluids, solvents and cleaners
Dot matrix printable
Available in white and yellow printable areas
Temperature rating
Operating temperature range
–40°C to +135°C
–40°F to +275°F
Specifications/approvals
Tyco Electronics
TTDS-030
Military
SAE AS81531 4.6.2,
MIL-STD-202 Method 215J
Industry
DMS 2325, DMS 2409
Printer information
AM6310 (dot matrix)
Tyco Electronics ribbon
1892 BK01 (dot matrix)
Part numbering system
Heat Shrink/Cable Markers
30
Tyco Electronics printer
NMX 25625 WE 2.5
Pack size
Color
Product size
Product family
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
NMX Flame retardant, light weight tie on cable marker tags
Ordering information
3.500
2.500
0.625
Available sizes and formats
Ordering description
Label width
mm
NMX25625<color>2.5
63.50
Label height
inches
2.500
mm
15.87
inches
0.625
Printable width
mm
50.80
inches
2.000
Weight
(g/10 pcs.)
2.5
Wire and Harness ID Products
Heat-Shrink/Cable Markers
Options
Package sizes
Colors
Standard
2500 pieces per pack
Nonstandard
Larger pack sizes are available. Please contact Tyco Electronics.
White
Yellow
WE
YE
Ordering information: Specify product name, product size, color and pack size.
Heat Shrink/Cable Markers
Ordering example: NMX25625WE2.5
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
31
Wire and Harness ID Products
Heat-Shrink/Cable Markers
MultiMark Strip and Carriers insert marker for post termination identification
MultiMark is comprised of a polyolefin printed strip, which is
inserted into a protective PVC carrier. The carrier can be applied to
wires or cables pre-termination to allow post termination printed
strip insertion or the strips can be replaced post termination when
re-labeling is required.
The PVC carrier protects the markers from dust and grime. These
carriers are available in a number of sizes to cover a wide range of
cable diameters.
The printable strips are presented as organized markers
assembled onto fanfolded paper carrier for ease of selection and
kitting. The strips are available in a variety of lengths.
Available for printing by dot matrix only.
Features and benefits
Suitable for post termination labeling and re-labeling
Marker lengths 10mm to 30mm
Clear carriers to fit cable diameters 1.8mm to 8.0mm
Temperature rating
Operating temperature range
–45°C to +70°C
–49°F to 158°F
Specifications/approvals
Tyco Electronics
TTDS-003
Military
MIL-STD 202 method 215J
SAE-AS81531 4.6.2
Printer information
Heat Shrink/Cable Markers
Tyco Electronics Printer
Tyco Electronics Ribbon
32
AM6310 (dot matrix)
1892BK04 (dot matrix)
Part numbering system
082 5 99 19A
Size (pack quantity and length)
Color
Format Number (height)
Material Type
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Ordering Information
Type
Format Number
Color
Size
Pack Qty
Marker length
082 = Polyolefin Label
5 = height 4mm
99 = White
01A
880 pcs.
15.0mm
94 = Yellow
03A
880 pcs.
30.0mm
05A
792 pcs.
10.0mm
MultiMark
.
02A
1760 pcs.
15.0mm
04A
1760 pcs.
30.0mm
06A
1848 pcs.
10.0mm
17A
1320 pcs.
20.0mm
18A
2640 pcs.
20.0mm
19A
3520 pcs.
15.0mm
Legends
Order Code
Marker
Length
Marker
Quantity
Color
0.16
792
White
0.16
1848
White
4
0.16
880
White
mm
inches
08259905A
10.2
0.4
4
08259906A
10.2
0.4
4
08259901A
15.2
0.6
mm
Height
Pack
inches
08259902A
15.2
0.6
4
0.16
1760
White
08259919A
15.2
0.6
4
0.16
3520
White
08259917A
20.2
0.8
4
0.16
1320
White
08259918A
20.2
0.8
4
0.16
2640
White
08259903A
30.2
1.2
4
0.16
880
White
08259904A
30.2
1.2
4
0.16
1760
White
08259405A
10.2
0.4
4
0.16
792
Yellow
08259406A
10.2
0.4
4
0.16
1848
Yellow
08259401A
15.2
0.6
4
0.16
880
Yellow
08259402A
15.2
0.6
4
0.16
1760
Yellow
08259419A
15.2
0.6
4
0.16
3520
Yellow
08259417A
20.2
0.8
4
0.16
1320
Yellow
08259418A
20.2
0.8
4
0.16
2640
Yellow
08259403A
30.2
1.2
4
0.16
880
Yellow
08259404A
30.2
1.2
4
0.16
1760
Yellow
For Cable Size (mm2)
Carrier Size
Carriers
Order Code
For Cable Diameter (mm)
Carrier Length
Pack Quantity
0825001
1.8 - 4.0
0.5 - 1.5
0
-----
50m coil
0825016
1.8 - 4.0
0.5 - 1.5
0
16
1200 pcs
0825032
1.8 - 4.0
0.5 - 1.5
0
32
600 pcs
0825201
2.6 - 6.0
1.5 - 6.0
2
-----
30m coil
0825216
2.6 - 6.0
1.5 - 6.0
2
16
800 pcs
0825232
2.6 - 6.0
1.5 - 6.0
2
32
400 pcs
0825416
5.2 - 8.0
4.0 - 16.0
4
16
400 pcs
0825432
5.2 - 8.0
4.0 - 16.0
4
32
200 pcs
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Wire and Harness ID Products
MultiMark Strip and Carriers insert marker for post termination identification
Heat Shrink/Cable Markers
Heat-Shrink/Cable Markers
33
Wire and Harness ID Products
Heat-Shrink/Cable Markers
iMC Laser or hand writable marking clip
Tyco Electronics iMC are marking clips designed for the identification of wires and can be permanently attached to wires, post
termination.
They can be quickly and simply clipped on the wire or cable. The
polyester insert strip which can be printed using a laser printer or
written by hand is then inserted in the clip.
The marking clips are fastened without the need of cable ties.
Features and benefits
Protects against damp, dust and dirt
iMC polyester strip can be marked with a laser printer or
by hand
Quick and flexible
iMC strip is a dual color label with white on one side and
yellow on the other
Temperature rating
Operating temperature
0° to +80°C
(+32° to +176°F)
Printer Information
Standard laser printer with auto/manual sheet feed
Heat Shrink/Cable Markers
Contact Tyco Electronics Electronics Identification for more information.
34
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
iMC Laser or hand writable marking clip
Ordering Information
Marker Clips
Ordering
Description
Clips
per pack
Recommended Use
Range mm (inches)
Typical Cross
Section mm2
Dimensions
Length x Width mm (inches)
iMC02
500
0.75 - 2.00 (0.03 - 0.08)
0.20 - 0.75
15 x 7.8 (0.59 - 0.31)
iMC04
500
1.75 - 3.25 (0.07 - 0.13)
0.50 - 1.50
15 x 7.8 (0.59 - 0.31)
iMC06
500
3.00 - 4.50 (0.12 - 0.18)
1.50 - 6.00
15 x 9.5 (0.59 - 0.37)
iMC08
500
4.25 - 6.00 (0.17 - 0.24)
6.00 - 10.00
15 x 9.5 (0.59 - 0.37)
Legend Strips (A4 Sheets)
Labels
per sheet
560
Color
1 side White/1 side Yellow
Label Size
Height x Width mm (inches)
6.4 x 12.2 (0.25 x 0.48)
Heat Shrink/Cable Markers
Ordering
Description
iMCA4ES-4/9
Wire and Harness ID Products
Heat-Shrink/Cable Markers
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
35
Wire and Harness ID Products
Heat-Shrink/Cable Markers
iKC/iKB Laser or hand writable cable clip
Tyco Electronics iKC/iKB are cable clips designed for the identification of wires and cables in rough, damp and dusty environments.
The legend strip (iKB) with the printable information is embedded
in the cable clip (iKC) and therefore has all- round protection.
The cable clips are fastened on using cable ties.
.
Features and benefits
Protects against damp, dust and dirt
iKB legend strip marked with a laser printer or by hand
Universal application on various cable diameters
iKB legend strip is a dual color label with white on one side
and yellow on the other
Temperature rating
Operating temperature
-26°C to +130°C
(-15°F to +266°F)
Printer Information
Standard laser printer with auto/manual sheet feed
Heat Shrink/Cable Markers
Contact Tyco Electronics Electronics Identification for more information.
36
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Wire and Harness ID Products
Heat-Shrink/Cable Markers
iKC/iKB Laser or hand writable cable clip
Ordering Information
Cable Clips iKC
Clips
per pack
Dimensions
L x W mm (inches)
iKC01
25
44 x 21 (1.73 - 0.83)
iKC02
25
34 x10.5 (1.34 - 0.41)
iKC03
25
68 x 10.5 (2.68 x - 0.41)
Ordering
Description
Labels
per sheet
Color
Label Size
H x W mm (inches)
iKB01P-9/4
60
1 side White
16 x 40 (0.63 x 1.57)
Heat Shrink/Cable Markers
Ordering
Description
Ordering Information
Legend Strips iKB (A4 Sheets)
1 side Yellow
iKB02P-9/4
240
1 side White
6.2 x 30 (0.24 x 0.41)
1 side Yellow
iKB03P-9/4
120
1 side White
6.2 x 64 (0.24 x 0.41)
1 side Yellow
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
37
Wire and Harness ID Products
Performance Labels
VF/NPVF/VF-130 Tedlar® color coding tape and labels
This polyvinyl fluoride material is designed for use as a wire/cable
marker, label and wrap-around in the general aviation industry.
The product is ideal for a variety of harsh chemical environments
and where non-igniting/self-extinguishing properties are a
necessity. It is available in several application-defined types and
sizes and can be used with various printing technologies.
VF series
The VF series of Tedlar® products is specifically designed for
wire/cable labeling. The product is dot matrix or thermal transfer
printable and is available in several continuous and die-cut formats
to fit a wide range of cables/cable bundles. The product meets all
the requirements of the BMS 13-47, DMS 2359 and GAT100BA
specifications, the benchmarks for pressure-sensitive wrap-around
labels in the aerospace industry.
NPVF Series
The NPVF Tedlar ® is a non-printable, 12.7mm (0.5”) wide
and 30.48m (100’) long continuous tape designed for use
as a color-coded identifier for cables/cable bundles.
Besides identifying the bundle this product is wrapped
around, it also provides strength and rigidity to the bundle.
The product has all the features of the VF series of Tedlar ®
products except for printability.
VF-130 Series
The VF-130 series is a range of clear non-printable Tedlar®
tapes designed for use as an over laminate on wires/bundle
identifiers where additional UV protection is required. These
tapes can be used over various types of identifiers like wrap
around labels, heat-shrink labels, tie-on cable labels and
pressure-sensitive markers.
Temperature rating
Operating temperature range
VF and NPVF
–40°C to +130°C
–40°F to +266°F
VF-130
–40°C to +105°C
–40°F to +221°F
VF-130
-40°C to 105°C
-40°F to 221°F
Specifications/approvals
Tyco Electronics
TTDS-005 (TTVF/DMVF)
Military
MIL-M-87958
DMS 2359
Industry
BMS-13-47
BACT 19
GAT100BA
TTDS-004 (NPVF)
Printer information
Performance Labels
Features and benefits
38
Resists water, oil, conventional cleaning agents,
and oil based solvents
Filters UV light
Exhibits high degree of resistance to aging
Meets the requirements of MIL-M-87958
Available in several colors to facilitate color-coding
and clear for over laminating
Tyco Electronics printer
AM6310 (dot matrix)
T308S* (thermal transfer)
*Size dependent. Contact Tyco
Electronics.
Tyco Electronics ribbon
1892BK01 (dot matrix)
1330-3300-10* (thermal transfer)
* Alternative printers and ribbons are available
for special applications. Contact Tyco
Electronics Electronics Identification for more
information.
Part numbering system (Continuous)
TTVF 200 YW-100
Length (feet)
Color
Width (inches)
Product family
Part numbering system (Die-Cut)
TTVF 6004 GN 2.5
Pack size
Color
Label size (W x H)
Product family
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
VF/NPVF/VF-130 Tedlar® color coding tape and labels
Ordering information
Continuous
NPVF
Die-Cut
LABEL WIDTH
ROLL WIDTH
Polyvinyl Fluoride VF Tedlar ® – Continuous Labels
Ordering
Printer
Label width
description
type
mm inches
Label length
Meters Feet
Quantity
per pack
<format>VF050<color> -180
DM/TT
12.70
0.500
54.86
180
Continuous
<format>VF075<color> -100
DM/TT
19.05
0.750
30.48
100
Continuous
<format>VF100<color> -100
DM/TT
25.40
1.000
30.48
100
Continuous
<format>VF150<color> -100
DM/TT
38.10
1.500
30.48
100
Continuous
<format>VF200<color> -100
DM/TT
50.80
2.000
30.48
100
Continuous
<format>VF300<color> -100
DM/TT
76.20
3.000
30.48
100
Continuous
<format>VF400<color> -100
DM/TT
101.60
4.000
30.48
100
Continuous
Polyvinyl Fluoride VF Tedlar ® – Die-Cut Labels
Ordering
Printer
description
type
Label width
mm inches
Label height
mm inches
Wire and Harness ID Products
Performance Labels
Quantity
per pack
<format>VF1029<color>2.5
DM/TT
25.40
1.000
73.66
2.900
2500
<format>VF1079<color>1
DM/TT
25.40
1.000
200.66
7.900
1000
<format>VF1529<color>2.5
DM/TT
38.10
1.500
73.66
2.900
2500
<format>VF1679<color>1
DM/TT
40.64
1.600
200.66
7.900
1000
<format>VF3015<color>1
DM/TT
76.20
3.000
38.10
1.500
1000
<format>VF3509<color>2.5
DM/TT
88.90
3.500
22.86
0.900
2500
<format>VF6004<color>2.5
DM/TT
152.40
6.000
10.16
0.400
2500
Options
Format
(TT) Thermal transfer printable
Colors
Yellow
White
Red
Blue
Green
Violet
Pink
Code
YW
WE
RD
BE
GN
VT
PK
Polyvinyl Fluoride NPVF Tedlar ® – Color coding tape
Ordering
Printer
Roll width
description
type
mm inches
NPVF050XX-100
N/A
Label length
Meters Feet
30.48 100
0.500
12.70
Quantity
per pack
Continuous
Options
Colors
Yellow
White
Red
Blue
Green
Violet
Pink
Black
Brown
Orange
Grey
Gold
Code
YW
WE
RD
BE
GN
VT
PK
BK
BN
OE
GY
GD
Polyvinyl Fluoride VF-130 Tedlar® – Over laminate tapes
Ordering
Printer
Label width
description
type
Color
mm inches
NPVF150CL -100
N/A
Clear
38.10
1.500
NPVF200CL-100
N/A
Clear
50.80
2.000
NPVF300CL-100
N/A
Clear
76.20
3.000
NPVF400CL -100
N/A
Clear
101.60
4.000
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Label length
Meters Feet
30.48 100
30.48 100
30.48 100
30.48 100
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Quantity
per pack
Continuous
Continuous
Performance Labels
(DM) Dot matrix printable
Continuous
Continuous
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
39
Wire and Harness ID Products
Performance Labels
RMK-6 Computer printable epoxy coated labels
RMK-6 is a computer printable labelstock with outstanding fluid
and abrasion resistance, designed to be printed by impact dot
matrix printers. When heat-cured after printing, its unique heat
reactive epoxy surface “locks in” the image to combine the
versatility and convenience of on-site printing with performance to
meet the toughest conditions. A high performance acrylic
adhesive ensures simple installation while maintaining excellent
adhesion.
Typical applications are rating plate labels, component
identification, and pipe and cable wraparound markers. Outdoor
use is not recommended.
Features and benefits
Printable by dot matrix printers
Excellent fluid and abrasion resistance without an overlay
High performance acrylic adhesive
Low fire hazard properties
Indoor use only
Temperature rating
Operating temperature range
Wiring marking
Panel marking
Excursion temperature
Performance Labels
Storage conditions
40
–40°C to +85°C
–40°F to +185°F
–40°C to +105°C
–40°F to +221°F
+200°C for 2 hours
Unopened
12 months at temperatures not exceeding +35°C (+95°F).
Opened
6 months at temperatures not exceeding +25°C (+77°F)
and 80% relative humidity
Curing
4 - 6 minutes at 160°C
in an air circulating oven.
Specifications/approvals
Tyco Electronics
Industry
RW 2520
TTDS-032
UL
MH17259 Group PGGU2
Printer information
Tyco Electronics printer
AM6310 (dot matrix)
Tyco Electronics ribbon
1892BK04 (dot matrix)
Part numbering system
RMK6 8.5
Label height (mm)
Product family
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Wire and Harness ID Products
Performance Labels
RMK-6 Computer printable epoxy coated labels
Ordering information
Matrix removed
12.7
W
127–0.1
(per 10 pitches)
H
4.0 Dia. hole
9–1
59.8–1
65–1
RayMark coating
Pressure sensitive
acrylic adhesive
0.16 Nom .
White polyester film
Release paper
carrie r
Available sizes and formats
Ordering
description
Label
height
mm
Label
width
mm
Package
quantity
Labels per pack
10000
RMK6-4.2
4.20
50.80
RMK6-8.5
8.50
50.80
5000
RMK6-12.7
12.70
50.80
3000
RMK6-17.0
17.00
50.80
2500
RMK6-25.4
25.40
50.80
1500
RMK6-55.0
55.00
50.80
750
RMK6-WM*
*
50.80
*An uncut version for wraparound markers. Spool length = 40 meters.
*
Options
Standard
White
Performance Labels
Colors
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
41
Wire and Harness ID Products
Performance Labels
RMK Computer printable epoxy coated labels in a sheet form
RMK is a computer printable labelstock with outstanding fluid and
abrasion resistance, designed to be printed by sheet fed inkjet
printers. When heat-cured after printing its unique heat reactive
epoxy surface “locks in” the image to combine the versatility and
convenience of on-site printing with performance to meet the
toughest conditions. A high performance acrylic adhesive ensures
simple installation while maintaining excellent adhesion. A wide
range of label sizes are available, supplied in A4 sheets for feeding
through standard inkjet printers.
Typical applications are replacement of engraved metal or plastic
labels, signs, rating plate labels, and color coding.
Features and benefits
High performance label material
High performance acrylic adhesive
A4 format sheet
Printable by color inkjet printers with sheet feed
Outstanding fluid and abrasion resistance without an overlay
Wiring marking
–40°C to +85°C
–40°F to +185°F
Low fire hazard properties
Panel marking
–40°C to +105°C
–40°F to +221°F
Indoor use only
Temperature rating
Operating temperature range
Excursion temperature
Storage conditions
+200°C for 2 hours
Unopened
12 months at temperatures not exceeding
+35°C (+95°F)
Opened
6 months at temperatures not exceeding
+25°C (+77°F)
and 80% relative humidity
Curing
4 - 6 minutes at 160°C
in an air circulating oven.
Specifications/approvals
Tyco Electronics
Industry
RW 2518
MH17259 Group PGGU2
UL
Printer information
Performance Labels
Various color inkjet printers can be used depending on the application, mainly HP800
or HP900 series if available.
42
Tyco Electronics recommended printer
Tyco Electronics recommended inks
Epson R340/R320
Standard Epson
For further advice on possible alternative printers, contact Tyco Electronics.
Part numbering system
RMK-18x35- A4
Sheet size
Label size (mm)
Product family
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
RMK Computer printable epoxy coated labels in a sheet form
Ordering information
210 mm
W
297 mm
H
188 mm
usable
r = 1 mm to 3 mm
(size dependent)
A4 sheet dimensions
Label
height
mm
Label dimensions
Label
width
mm
Labels
per sheet
RMK-6x20-A4
6
20
224
RMK-9x25-A4
9
25
132
RMK-10x19-A4
10
19
160
RMK-11x40-A4
11
40
72
RMK-18x20-A4
18
20
96
RMK-18x25-A4
18
25
72
RMK-18x35-A4
18
35
48
RMK-18x50-A4
18
50
36
RMK-25x30-A4
25
30
45
RMK-25x35-A4
25
35
36
RMK-25x50-A4
25
50
27
RMK-25x70-A4
25
70
10
RMK-25x75-A4
25
75
18
RMK-25x100-A4
25
100
10
RMK-28x40-A4
28
40
32
RMK-30x13-A4
30
13
88
RMK-30x25-A4
30
25
48
RMK-30x70-A4
30
70
14
RMK-35x75-A4
35
75
12
RMK-50x13-A4
50
13
50
RMK-50x25-A4
50
25
30
RMK-50x100-A4
50
100
5
RMK-75x150-A4
75
150
3
RMK-87x13-A4
87
13
33
18
RMK-87x25-A4
87
25
RMK-150x150-A4
150
150
1
RMK-170x13-A4
170
13
11
RMK-170x25-A4
170
25
6
RMK-190x30-A4
190
30
5
RMK-200x13-A4
200
13
10
RMK-250x13-A4
250
13
11
RMK-250x25-A4
250
25
RMK-UNCUT-A4
Uncut
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Performance Labels
Available sizes and formats
Ordering
description
r
6
50 sheets
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
Wire and Harness ID Products
Performance Labels
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
43
Wire and Harness ID Products
Performance Labels
TTP Continuous polyester for decals
The system is designed for applications that require a highdurability label with all the features of a “silk-screened” label, only
without the cost, time and inflexibility involved in obtaining a
silk-screened product. The product utilizes high performance
polyester with permanent acrylic adhesive. It is thermal transfer
printable with all the capabilities of graphics, barcodes, logos and
several fonts. The product is available in several colors although
white, clear and metalized silver are available as standard. Typical
applications include panel labels, fascias, decalcomanias and asset
identification and rating plates. Typical industry use includes
aerospace, defense, electronics and infrastructure.
Features and benefits
Efficient solution for expensive silk-screen printing
Available in continuous format
Several widths and colors available
Interior and exterior aircraft use including flight
entertainment and deck instrumentation
Thermal transfer printable
Printable in any combination of material and ribbon colors
Temperature rating
Operating temperature range
Clear, White
-40°C to +150°C -40°F to +302°F
Metalized, and colors
Specifications/approvals
Tyco Electronics
TTDS- 031
Military
A-A-59485 (accelerated weather
resistance and salt spray)
Industry
GAT 100BB
UL 17292 Group PGJI2 (polywhite)
Printer information
T312S (thermal transfer)
Tyco Electronics ribbon
1330-0607-10 (thermal transfer)
Part numbering system
Performance Labels
44
Tyco Electronics printer
TTP 200 CL-10
Length
Color
Label width (inches)
Product name
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Wire and Harness ID Products
Performance Labels
TTP Continuous polyester for decals
Ordering information
LABEL WIDTH
Available sizes and formats
Ordering
description
Label
width
mm inches
Roll
length
meters feet
Quantity
per pack
TTP200<color>-10
50.80
2.000
30.48
100
TTP300<color>-10
76.20
3.000
30.48
100
Continuous
Continuous
TTP400<color>-10
101.60
4.000
30.48
100
Continuous
TTP600<color>-10
152.40
6.000
30.48
100
Continuous
Note: Use TTPA prefix for high tack adhesive
Options
Colors
Colors
Colors
Standard
Clear
White
Metalized silver
Code
CL
WE
MP
Non Standard
Red
Green
Blue
Orange
Code
RD
GN
BE
OE
Non Standard
Black
Yellow
Code
BK
YW
Performance Labels
Ordering example: TTP400WE-10 or TTPA400WE (for the high tack adhesive variant)
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
45
Wire and Harness ID Products
Performance Labels
HPK Thermal transfer printable panel labels
Tyco Electronics HPK is a semi-rigid, heavy gauge polypropylene
film with a permanent acrylic adhesive, designed to permanently
identify control panel components and racks, as well as general
labeling applications that require a high performance heavy gauge
material. They offer excellent abrasion resistance, and adhere to
most smooth surfaces including bare and painted metal.
For reliable print performance and durability, use with Tyco
Electronics 1330-0607 ribbon.
Features and benefits
Self-adhesive backing for quick and easy fixing
Thermal transfer printable
Recommended for indoor use
Resistant to common fluids, lubricants and solvents
Temperature rating
Operating temperature range
–29°C to +80°C
–20°F to +176°F
10°C
+50°F
Minimum recovery temperature
Specifications/approvals
Tyco Electronics
TTDS- 008
Printer information
Tyco Electronics printer
T308S (thermal transfer)
Tyco Electronics ribbon
1330-0607-10 (thermal transfer)
Part numbering system
HPK 02 WE 1 050
Performance Labels
Label width (mm)
Scoring (optional)
Color
Label height
Product family
46
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
HPK Thermal transfer printable panel labels
Ordering information
Available sizes and formats
Ordering
Labels
description
across
(A) Label
width
(B) Label
height
(C) Vertical
repeat
(D) Web
width
inches
mm
inches
mm
inches
HPK02WE1050
1
50.80
2.000
5.10
0.200
8.30
0.325
57.20
HPK04WE1050
1
50.80
2.000
10.20
0.400
13.30
0.525
57.20
2.250
HPK06WE1050
1
50.80
2.000
15.20
0.600
18.40
0.725
57.20
2.250
mm
mm
inches
2.250
HPK08WE1050
1
50.80
2.000
20.30
0.800
23.50
0.925
57.20
2.250
HPK10WE1050
1
50.80
2.000
25.40
1.000
28.60
1.125
57.20
2.250
Wire and Harness ID Products
Performance Labels
Options
Prescoring
Perforated score to produce multiple labels from each HPK label.
Number of prescores
0 prescores
1 prescore
Code
1
2
Package size
Standard
1000 piece pack
Color
Standard
White
Ordering information: Specify product name, product size and prescores.
Performance Labels
Ordering example: HPK02WE1050
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
47
Wire and Harness ID Products
Self-Laminating Labels
SB Thermal transfer printable self-laminating labels
Tyco Electronics SB is a thermal transfer printable, translucent
vinyl film with a permanent acrylic adhesive, supplied with a white
printable area, which is over-laminated upon application with the
translucent portion of the label. This ‘self-laminating’ feature
protects the printed area from exposure to oil, solvents, water and
abrasion. SB labels offer excellent conformability to round,
irregular or flexible surfaces. Ideal for wire and cable identification,
including flat ribbon cables that are subject to repeated bending,
they are UL Listed. For reliable print performance and durability,
use with Tyco Electronics TMS-RJS-RIBBON-4RPSCE series ribbon.
Features and benefits
Manufactured with a white coated area for
printing, and with a clear tail to wind around a wire
or cable over the printed surface to seal out impurities
that would cause the label to become illegible
Protects printed information from chemicals and frequent
handling
Designed to withstand exposure to oil, solvents, and water
Temperature rating
Operating temperature range
–40°C to +80°C
–40°F to +176°F
Specifications/approvals
Tyco Electronics
TTDS- 052
Industry
UL MH17001 (Group PGDQ2)
MH17292 (Group PGJI2)
Self-Laminating Labels
Printer information
48
Tyco Electronics printer
T308S*
(thermal transfer)
Tyco Electronics ribbon
TMS-RJS-RIBBON-4RPSCE*
(thermal transfer)
* Alternative printers and ribbons are available
for special applications. Contact Tyco
Electronics Identification for more
information.
Part numbering system
SB 100 225 WE 5
Pack size
Color
Label length
Label width
Product family
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Ordering information
Available sizes and formats
Ordering
Package Labels
description
quantity across
Max.Cable
OD
inches
mm
(A) Label
height
mm inches
(B) Label
mm
inches
(C) Printable
repeat
mm inches
(D) Horizontal
repeat
mm inches
(E) Vertical
width
mm inches
(F) Web
SB050100WE10
10,000
5
5.1
.20
12.70
0.500
25.40
1.000
8.50
0.330
16.80
0.600
31.00
1.222
86.00 3.384
SB050143WE10
10,000
5
7.6
.30
12.70
0.500
36.50
1.437 12.70
0.500
16.80
0.662
42.20
1.661
86.00 3.384
SB075094WE10
10,000
4
7.6
.30
19.10
0.750
23.90
0.940
9.50
0.375
20.30
0.800
28.60
1.125
85.10 3.350
SB080150WE10
10,000
4
7.6
.30
20.30
0.800
38.10
1.500 12.70
0.500
22.90
0.900
44.50
1.750
94.90 3.736
mm inches
SB100143WE5
5,000
3
7.6
.30
25.40
1.000
36.50
1.437 12.70
0.500
27.90
1.100
42.20
1.661
87.30 3.436
SB100225WE5
5,000
3
12.2
.48
25.40
1.000
57.20
2.250 19.10
0.750
27.90
1.100
66.70
2.625
87.30 3.436
SB100375WE2.5
2,500
3
22.4
.88
25.40
1.000
95.30
3.750 25.40
1.000
27.90
1.100
101.60
4.000
87.30 3.436
SBH100375WE2.5 2,500
1*
22.4
.88
25.40
1.000
95.30
3.750 25.40
1.000
N/A
28.60
1.125
100.30 3.950
N/A
SB100594WE1
1,000
3
35.6
1.4
25.40
1.000 151.00
5.940 38.10
1.500
27.90
1.100
158.80
6.250
87.30 3.436
SB100743WE1
1,000
3
35.6
1.4
25.40
1.000 188.90
7.437 38.10
1.500
27.90
1.100
195.30
7.688
87.30 3.436
SB190319WE2.5
2,500
2
12.2
.48
48.30
1.900
81.00
3.190 19.10
0.750
50.80
2.000
87.40
3.440
105.10 4.138
SB190594WE1
1,000
2
35.6
1.4
48.30
1.900 151.00
5.940 38.10
1.500
50.80
2.000
158.80
6.250
105.10 4.138
SB200143WE2.5
2,500
2
7.6
.30
50.80
2.000
36.50
1.437 12.70
0.500
50.80
2.000
42.20
1.661
107.60 4.236
SB200225WE2.5
2,500
2
12.2
.48
50.80
2.000
57.20
2.250 19.10
0.750
50.80
2.000
66.70
2.625
107.60 4.236
SB200375WE2.5
2,500
2
22.4
.88
50.80
2.000
95.30
3.750 25.40
1.000
53.30
2.100
101.60
4.000
111.40 4.386
SB200743WE1
1,000
2
*One label across rotated format.
48.3
1.9
50.80
2.000 188.90
7.437 38.10
1.500
53.30
2.100
195.30
7.688
110.10 4.336
Options
Colors
Standard
White with clear tail
Non-Standard
Red, Orange, Yellow, Green, Blue, Violet, with clear tail
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Wire and Harness ID Products
SB Thermal transfer printable self-laminating labels
Self-Laminating Labels
Self-Laminating Labels
49
Wire and Harness ID Products
Self-Laminating Labels
SP Self-laminating polyester labels
Tyco Electronics "SP" is a thermal transfer printable, low profile
translucent polyester film with a permanent acrylic adhesive.
Supplied with a white printable area, which is over-laminated upon
application with the translucent portion of the label. This
'self-laminating' feature better protects the printed area from
exposure to oil, solvents, water and abrasion. Excellent
conformability to round, irregular or flexible surfaces. Ideal for wire
& cable identification, including flat ribbon cables that are subject
to repeated bending. For reliable print performance and durability,
use with Tyco Electronics 1330-0607 ribbon.
Features and benefits
Self laminating feature for protection and mark
permanence of the printed area of the label
Designed to better withstand exposure to oil, solvents,
and water
Low profile design for conformability to wires and cables
High tack adhesive makes SP suitable for flagging and
wrapping around thin gauge wires
Adhesive
Permanent rubber-based
Service temperature
–40°C to +150°C
–40°F to +302°F
Recommended printer T308S*
Recommended ribbon 1330-0607-10*
*Alternative printers and ribbons are available for special
applications. Contact Tyco Electronics Identification for
more information.
Part numbering system
SP 100 225 WE 5
Self-Laminating Labels
Pack size
Color
Label length
Label width
Product family
50
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
SP Self-laminating polyester labels
Ordering information
Available sizes and formats
Ordering
Package
description
quantity
Labels
across
Max. Cable
(A) Label
OD
width
mm inches mm inches
(B) Label
height
mm inches
(C) Printable
height
mm inches
(D) Horizontal
repeat
mm inches
(E) Vertical
repeat
mm inches
(F) Web
width
mm inches
SP050100WE10
10,000
5
5.1
.20
12.70
0.500
25.40
1.000
8.50
0.330
16.80 0.600
31.00
1.222
86.00
3.384
SP050143WE10
10,000
5
7.6
.30
12.70
0.500
36.50
1.437
12.70
0.500
16.80 0.662
42.20
1.661
86.00
3.384
SP075094WE10
10,000
4
7.6
.30
19.10
0.750
23.90
0.940
9.50
0.375
20.30 0.800
28.60
1.125
85.10
3.350
SP080150WE10
10,000
4
7.6
.30
20.30
0.800
38.10
1.500
12.70
0.500
22.90 0.900
44.50
1.750
94.90
3.736
SP100143WE5
5,000
3
7.6
.30
25.40
1.000
36.50
1.437
12.70
0.500
27.90 1.100
42.20
1.661
87.30
3.436
SP100225WE5
5,000
3
12.2
.48
25.40
1.000
57.20
2.250
19.10
0.750
27.90 1.100
66.70
2.625
87.30
3.436
SP100375WE2.5
2,500
3
22.4
.88
25.40
1.000
95.30
3.750
25.40
1.000
27.90 1.100
101.60
4.000
87.30
3.436
SP100594WE1
1,000
3
35.6
1.4
25.40
1.000 151.00
5.940
38.10
1.500
27.90 1.100
158.80
6.250
87.30
3.436
SP200225WE2.5
2,500
2
12.2
.48
50.80
2.000
57.20
2.250
19.10
0.750
50.80 2.000
66.70
2.625
107.60
4.236
SP200375WE2.5
2,500
2
22.4
.88
50.80
2.000
95.30
3.750
25.40
1.000
53.30 2.100
101.60
4.000
111.40
4.386
Wire and Harness ID Products
Self-Laminating Labels
Options
Standard
White with clear tail
Self-Laminating Labels
Colors
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
51
Wire and Harness ID Products
Self-Laminating Labels
PVF Polyvinyl fluoride thermal transfer printable self-laminating labels
Tyco Electronics PVF is a thermal transfer printable, translucent
polyvinyl fluoride (Tedlar®) film with a permanent acrylic adhesive,
designed for wire and cable marking applications that require the
‘self-extinguishing’ properties of Tedlar®. PVF labels are supplied
with a white printable area, which is over-laminated upon
application with the translucent portion of the label. This
‘self-laminating’ feature protects the printed area from exposure to
oil, solvents, water and abrasion. The low-profile design makes PVF
suitable for wrapping onto thin wire gauges. For reliable print
performance and durability use with Tyco Electronics 1330-3300
series ribbon.
Features and benefits
Resists water, oils, and conventional cleaning agents
Filters UV light
Exhibits high degree of resistance to aging
Thermal transfer printable
Temperature rating
Operating temperature range
–53°C to +135°C
–65°F to +275°F
Specifications/approvals
Tyco Electronics
TTDS-111
Printer information
Tyco Electronics printer
T308S* (thermal transfer)
Tyco Electronics ribbon
1330-3300-10* (thermal transfer)
*Alternative printers and ribbons are available
for special applications. Contact Tyco
Electronics Identification for more information.
Part numbering system
PVF 080 150 WE 10
Self-Laminating Labels
Pack size
Color
Label height (inches)
Label width
Product family
52
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Ordering information
Available sizes and formats
Ordering
Package Labels
description
quantity across
Max. Cable
OD
mm
(A) Label
width
inches
mm
inches
(B) Label
height
mm
(C) Printable
height
inches
mm
inches
(D) Horizontal
repeat
mm
inches
(E) Vertical
repeat
(F) Web
width
mm inches
mm inches
PVF050100WE10
10,000
5
5.1
.20
12.70
0.500
25.40
1.000
8.50
0.330
16.80
0.600
31.00
1.222
86.00 3.384
PVF050143WE10
10,000
5
7.6
.30
12.70
0.500
36.50
1.437
12.70
0.500
16.80
0.662
42.20
1.661
86.00 3.384
PVF080150WE10
10,000
4
7.6
.30
20.30
0.800
38.10
1.500
12.70
0.500
22.90
0.900
44.50
1.750
94.90 3.736
PVF100143WE5
5,000
3
7.6
.30
25.40
1.000
36.50
1.437
12.70
0.500
27.90
1.100
42.20
1.661
87.30 3.436
PVF100225WE5
5,000
3
12.2
.48
25.40
1.000
57.20
2.250
19.10
0.750
27.90
1.100
66.70
2.625
87.30 3.436
PVF100375WE2.5
2,500
3
22.4
.88
25.40
1.000
95.30
3.750
25.40
1.000
27.90
1.100
101.60
4.000
87.30 3.436
PVF100594WE1
1,000
3
35.6
1.4
25.40
1.000
151.0
5.940
38.10
1.500
27.90
1.100
158.80
6.250
87.30 3.436
PVF100743WE1
1,000
3
35.6
1.4
25.40
1.000
188.9
7.437
38.10
1.500
27.90
1.100
195.30
7.688
87.30 3.436
PVF190319WE2.5
2,500
2
12.2
.48
48.30
1.900
81.00
3.190
19.10
0.750
50.80
2.000
87.40
3.440 105.10 4.138
PVF190594WE1
1,000
2
35.6
1.4
48.30
1.900 151.00
5.940
38.10
1.500
50.80
2.000
158.80
6.250 105.10 4.138
PVF200143WE2.5
2,500
2
7.6
.30
50.80
2.000
36.50
1.437
12.70
0.500
50.80
2.000
42.20
1.661 107.60 4.236
PVF200225WE2.5
2,500
2
12.2
.48
50.80
2.000
57.20
2.250
19.10
0.750
50.80
2.000
66.70
2.625 107.60 4.236
PVF200375WE2.5
2,500
2
22.4
.88
50.80
2.000
95.30
3.750
25.40
1.000
53.30
2.100
101.60
4.000 111.40 4.386
PVF200743WE1
1,000
2
48.3
1.9
50.80
2.000 188.90
7.437
38.10
1.500
53.30
2.100
195.30
7.688 110.10 4.336
Options
Colors
Standard
White with clear tail
Non-Standard
Red, Orange, Yellow, Green, Blue, Violet, with clear tail
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Wire and Harness ID Products
PVF Polyvinyl fluoride thermal transfer printable self-laminating labels
Self-Laminating Labels
Self-Laminating Labels
53
Wire and Harness ID Products
Self-Laminating Labels
TW Dot matrix printable self-laminating labels
Tyco Electronics TW is a dot matrix printable, translucent vinyl film
with a permanent acrylic adhesive, supplied with a white printable
area, which is over-laminated upon application with the translucent portion of the label. This ‘self-laminating’ feature protects the
printed area from exposure to oil, solvents, water and abrasion.
TW labels offer excellent conformability to round, irregular or
flexible surfaces, and are ideal for wire and cable identification,
including flat ribbon cables that are subject to repeated bending.
They are UL Listed, with reliable print performance and durability,
when used with Tyco Electronics 1892BK01 ribbon.
Features and benefits
Manufactured with a white coated area for printing or writing
on, and with a clear wrap to wind around a wire or cable over
the printed surface to seal out impurities that would cause the
label to become illegible
Protects printed information from chemicals and frequent
handling
Designed to withstand exposure to oil, solvents, and water
Temperature rating
Operating temperature range
–40°C to +80°C
–40°F to +176°F
Specifications/approvals
Industry
UL MH17292 Group PGJI2
Printer information
Tyco Electronics printer
AM6310 (dot matrix)
Tyco Electronics ribbon
1892BK01 (dot matrix)
Self-Laminating Labels
Part numbering system
54
J TW 10
Pack size
Product family
Label size
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Ordering information
Available sizes and formats
Ordering
Package
Labels
description
quantity
across
Max. Cable
OD
mm inches
(A) Label
width
mm inches
(B) Label
height
mm inches
(C) Printable (D) Horizontal
height
repeat
mm inches
mm inches
(E) Vertical
repeat
mm inches
(F) Web
width
mm inches
J-TW10
10,000
12
5.1
0.20
12.70
0.500
19.10
0.750
9.50
0.375
15.20
0.600
25.40
1.000 205.70
8.100
N-TW10
10,000
16
7.6
0.30
12.70
0.500
36.50
1.437
12.70
0.500
12.70
0.500
38.10
1.500 228.60
9.000
Q-TW10
10,000
9
7.6
0.30
19.10
0.750
44.50
1.750
12.70
0.500
22.90
0.900
50.80
2.000 227.30
8.950
A-TW10
10,000
6
7.6
0.30
20.30
0.800
36.50
1.437
12.70
0.500
22.90
0.900
38.10
1.500 160.00
6.300
O-TW10
10,000
8
7.6
0.30
25.40
1.000
36.50
1.437
12.70
0.500
25.40
1.000
38.10
1.500 228.60
9.000
R-TW5
5,000
8
12.2
0.48
25.40
1.000
57.20
2.250
19.10
0.750
25.40
1.000
63.50
2.500 228.60
9.000
T-TW2.5
2,500
8
22.4
0.88
25.40
1.000
95.30
3.750
25.40
1.000
25.40
1.000 101.60
4.000 228.60
9.000
W1-TW1
1,000
8
35.6
1.40
25.40
1.000 150.90
5.940
38.10
1.500
25.40
1.000 152.40
6.000 228.60
9.000
D1-TW1
1,000
7
35.6
1.40
25.40
1.000 188.90
7.437
38.10
1.500
27.90
1.100 190.50
7.500 218.40
8.600
C1-TW2.5
2,500
3
12.2
0.48
48.30
1.900
3.190
19.10
0.750
50.80
2.000
3.500 175.30
6.900
P-TW5
5,000
4
7.6
0.30
50.80
2.000
36.50
1.437
12.70
0.500
50.80
2.000
38.10
1.500 228.60
9.000
S-TW2.5
2,500
4
12.2
0.48
50.80
2.000
57.20
2.250
19.10
0.750
50.80
2.000
63.50
2.500 228.60
9.000
81.00
88.90
U-TW2.5
2,500
4
22.4
0.88
50.80
2.000
95.30
3.750
25.40
1.000
50.80
2.000 101.60
4.000 228.60
9.000
W2-TW1
1,000
3
48.3
1.90
50.80
2.000 150.90
5.940
38.10
1.500
53.30
2.100 152.40
6.000 182.90
7.200
D3-TW1
1,000
3
48.3
1.90
50.80
2.000 188.90
7.437
38.10
1.500
55.90
2.200 190.50
7.500 188.00
7.400
Options
Colors
Standard
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
White with clear tail
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Wire and Harness ID Products
TW Dot matrix printable self-laminating labels
Self-Laminating Labels
Self-Laminating Labels
55
Wire and Harness ID Products
Self-Laminating Labels
PV Polyvinyl fluoride dot matrix printable self-laminating labels
Tyco Electronics PV is a dot matrix printable, translucent polyvinyl
fluoride (Tedlar®) film with a permanent acrylic adhesive, designed
for wire and cable marking applications that require the
‘self-extinguishing’ properties of Tedlar®. PV labels are supplied
with a white printable area, which is over-laminated upon
application with the translucent portion of the label. This
‘self-laminating’ feature protects the printed area from exposure to
oil, solvents, water and abrasion. The low-profile design makes PV
suitable for wrapping onto thin wire gauges. For reliable print
performance and durability, use with Tyco Electronics
1892BK01 ribbon.
Features and benefits
Resists water, oils, and conventional cleaning agents
Filters UV light
Exhibits high degree of resistance to ageing
Self-laminating feature for protection and mark permanence of
the printed area of the label
Temperature rating
Operating temperature range
–53°C to +135°C
–65°F to +275°F
Specifications/approvals
Tyco Electronics
TTDS- 092
Printer information
Tyco Electronics printer
AM6310 (dot matrix)
Tyco Electronics ribbon
1892BK01 (dot matrix)
Part numbering system
Self-Laminating Labels
N- PV 10
56
Pack size
Product family
Product size
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
PV Polyvinyl fluoride dot matrix printable self-laminating labels
Ordering information
Max. Cable
OD
mm
inches
(A) Label
width
(B) Label
height
mm inches mm
inches
(C) Printable
height
mm
inches
(D) Horizontal
repeat
mm
inches
(E) Vertical
repeat
mm
inches
(F) Web
width
mm
inches
J-PV10
10,000
12
5.1
0.20
12.70
0.500 19.10
0.750
9.50
0.375
15.20
0.600
25.40
1.000 205.70
8.100
N-PV10
10,000
16
7.6
0.30
12.70
0.500 36.50
1.437
12.70
0.500
12.70
0.500
38.10
1.500 228.60
9.000
Q-PV10
10,000
9
7.6
0.30
19.10
0.750 44.50
1.750
12.70
0.500
22.90
0.900
50.80
2.000 227.30
8.950
A-PV10
10,000
6
7.6
0.30
20.30
0.800 36.50
1.437
12.70
0.500
22.90
0.900
38.10
1.500 160.00
6.300
O-PV10
10,000
8
7.6
0.30
25.40
1.000 36.50
1.437
12.70
0.500
25.40
1.000
38.10
1.500 228.60
9.000
R-PV5
5,000
8
12.2
0.48
25.40
1.000 57.20
2.250
19.10
0.750
25.40
1.000
63.50
2.500 228.60
9.000
T-PV2.5
2,500
8
22.4
0.88
25.40
1.000 95.30
3.750
25.40
1.000
25.40
1.000 101.60
4.000 228.60
9.000
W1-PV1
1,000
8
35.6
1.40
25.40
1.000 150.90
5.940
38.10
1.500
25.40
1.000 152.40
6.000 228.60
9.000
D1-PV1
1,000
7
35.6
1.40
25.40
1.000 188.90
7.437
38.10
1.500
27.90
1.100 190.50
7.500 218.40
8.600
C1-PV2.5
2,500
3
12.2
0.48
48.30
1.900 81.00
3.190
19.10
0.750
50.80
2.000
88.90
3.500 175.30
6.900
P-PV5
5,000
4
7.6
0.30
50.80
2.000 36.50
1.437
12.70
0.500
50.80
2.000
38.10
1.500 228.60
9.000
S-PV2.5
2,500
4
12.2
0.48
50.80
2.000 57.20
2.250
19.10
0.750
50.80
2.000
63.50
2.500 228.60
9.000
U-PV2.5
2,500
4
22.4
0.88
50.80
2.000 95.30
3.750
25.40
1.000
50.80
2.000 101.60
4.000 228.60
9.000
W2-PV1
1,000
3
48.3
1.90
50.80
2.000 150.90
5.940
38.10
1.500
53.30
2.100 152.40
6.000 182.90
7.200
D3-PV1
1,000
3
48.3
1.90
50.80
2.000 188.90
7.437
38.10
1.500
55.90
2.200 190.50
7.500 188.00
7.400
Options
Colors
Standard
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
White with clear tail
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Self-Laminating Labels
Available sizes and formats
Ordering
Package Labels
description
quantity across
Wire and Harness ID Products
Self-Laminating Labels
57
Wire and Harness ID Products
Self-Laminating Labels
LSR Laser printable self-laminating labels
Tyco Electronics LSR is a laser printable, translucent polyester film
with a permanent acrylic adhesive, supplied with a white printable
area, which is over-laminated upon application with the
translucent portion of the label. This ‘self-laminating’ feature
protects the printed area from exposure to oil, solvents, water and
abrasion with good conformability to round surfaces. LSR is ideal
for wire and cable marking including flat ribbon cable. The lowprofile design makes LSR suitable for wrapping onto thin wire
gauges.
Features and benefits
Manufactured with a white coated area for printing or writing
on, and with a clear wrap to wind around a wire or cable over
the printed surface to seal out impurities that would cause
the label to become illegible
Protects printed information from chemicals and
frequent handling
Designed to withstand exposure to oil, solvents, and water
Can also be flagged around a wire rather than wrapped
Temperature rating
Operating temperature range
–40°C to +150°C
–40°F to +302°F
Printer information
Standard laser printer with auto/manual sheet feed.
Self-Laminating Labels
Contact Tyco Electronics Identification for more information.
58
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
LSR Laser printable self-laminating labels
Ordering information
Available sizes and formats
Ordering
Package
Labels
description quantity
across
Labels
per sheet
(A) Label
width
mm inches
(B) Label
height
mm inches
(C) Printable
height
mm inches
(D) Horizontal
repeat
mm inches
(E) Vertical
repeat
mm inches
13
156
12.70
0.500
19.10
0.750
9.40
0.370
15.20
0.600
20.60
0.810
13
78
12.70
0.500
38.10
1.500
12.70
0.500
15.20
0.600
40.60
1.600
CR-105-LSR 5,040
7
84
25.40
1.000
19.10
0.750
8.60
0.340
27.90
1.100
20.60
0.810
CR-106-LSR 2,520
7
63
25.40
1.000
25.40
1.000
8.60
0.340
27.90
1.100
27.90
1.100
CR-107-LSR 2,499
7
49
25.40
1.000
33.80
1.330
12.70
0.500
27.90
1.100
36.60
1.440
CR-108-LSR 1,008
7
21
25.40
1.000
80.50
3.170
24.60
0.970
27.90
1.100
84.10
3.310
CR-110-LSR 1,008
4
12
47.80
1.880
80.50
3.170
24.60
0.970
50.80
2.000
83.30
3.280
Self-Laminating Labels
CR-100-LSR 4,992
CR-101-LSR 4,992
Wire and Harness ID Products
Self-Laminating Labels
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
59
Wire and Harness ID Products
Self-Laminating Labels
CSL A4 Laser printable self-laminating labels
Tyco Electronics CSL is a laser printable, clear polyester film with a
permanent acrylic adhesive, supplied with a white or yellow
printable area, which is over-laminated upon application with the
clear section of the label.
Using the over-lamination process protects the printed area
against exposure to oil, solvents, water and abrasion.
Features and benefits
Manufactured with a white or yellow coated area for writing on,
and with a clear wrap to wind around a wire or cable to cover
the written legend and to protect it against impurities that
would cause the label to become illegible
Protects printed information from chemicals and frequent
handling
Designed to withstand exposure to Solvents, salts, alkalis and
water
Can also be flagged around a wire rather than wrapped
Temperature rating
Operating temperature range
–30°C to +120°C
–22°F to +248°F
Part numbering system
Self-Laminating Labels
CSL- 034 23 P- 4
60
Color
Material (Polyester)
Label width
Label height
Product family
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
CSL A4 Laser printable self-laminating labels
Ordering information
B
A
C
Available sizes and formats
Ordering
Markers/
description
pack
A
height
B
height
C
width
Max. cable
diameter
inches
mm
inches
inches
mm
inches
CSL-02713P-<color>
160
26.70
1.05
6.00
0.24
12.50
0.49
3.00
0.12
CSL-03418P-<color>
88
33.90
1.33
8.50
0.33
18.18
0.72
5.00
0.20
CSL-03425P-<color>
64
33.90
1.33
12.70
0.50
25.00
0.98
5.00
0.20
CSL-05525P-<color>
40
55.00
2.17
12.70
0.50
25.00
0.98
11.00
0.43
CSL-06925P-<color>
32
69.00
2.72
17.00
0.67
25.00
0.98
14.00
0.55
mm
mm
CSL-06933P-<color>
24
69.00
2.72
22.00
0.87
33.33
1.31
13.00
0.51
CSL-09333P-<color>
18
93.00
3.66
25.40
1.00
33.33
1.31
19.00
0.75
CSL-14033P-<color>
12
140.00
5.51
25.40
1.00
33.33
1.31
34.00
1.34
Colors
Yellow
White
Code
4
Wire and Harness ID Products
Self-Laminating Labels
Options
Self-Laminating Labels
9
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
61
Wire and Harness ID Products
Self-Laminating Labels
TKM Hand writable booklet self-laminating labels
Tyco Electronics TKM is a self writable, clear vinyl film with a
permanent acrylic adhesive, supplied with a white writable area,
which is over-laminated upon application with the clear portion of
the label.
TKM labels are a quick, simple and durable form of wire, cable and
pipe identification.
.
Features and benefits
Manufactured with a white coated area for writing on, and with
a clear wrap to wind around a wire or cable to cover the written
legend and to protect it against impurities that would cause the
label to become illegible
Protects printed information from chemicals and frequent
handling
Supplied in a handy pocket size booklet
Temperature rating
Designed to withstand exposure to Solvents, salts, alkalis
and water
Specifications/Approvals
Operating temperature range
Tyco Electronics
–54°C to +82°C
–65°F to +180°F
TTDS-056
Part numbering system
Self-Laminating Labels
TKM 75 WE - N
62
Standard Packaging
Color (WE=White)
Label size
Product family
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
TKM Hand writable booklet self-laminating labels
Ordering information
B
A
C
Available sizes and formats
Ordering
Markers/
description
pack
A
height
mm
B
height
inches
mm
C
width
inches
mm
inches
Max. cable
diameter
mm
inches
TKM75WE-N
60
75.00
3.0
25.00
1.00
25.00
1.00
14.00
0.60
TKM150WE-N
30
150.00
6.0
25.00
1.00
25.00
1.00
38.00
1.50
TKM230WE-N
30
230.00
9.0
25.00
1.00
25.00
1.00
63.00
2.50
Accessories for manual marking
Ordering
Description
description
Wire and Harness ID Products
Self-Laminating Labels
Quantity per pack
Felt-tip pen, fine
1
ZUB-03
Pencil for UV-resistant labelling
1
Self-Laminating Labels
ZUB-01
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
63
Wire and Harness ID Products
Self-Laminating Label Dimensions
Self-Laminating Label Dimensions
25.4mm
19.1mm
8.5mm
Print
area
25.4mm
19.1mm
9.5mm
Print
area
J-TW10
J-PV10
38.1mm
Print
area
Q-TW10
Q-PV10
SP050100WE10
SB050100WE10
PVF050100WE10
12.7mm
25.4mm
150.9mm
36.5mm
12.7mm
Print
area
20.3mm
12.7mm
Print
area
19.1mm
Print
area
12.7mm
Print
area
38.1mm
20.3mm
57.2mm
SB050143WE10
PVF050143WE10
N-TW10
N-PV10
36.5mm
12.7mm
Print
area
12.7mm
44.5mm
12.7mm
SP100225WE5
SB100225WE5
PVF100225WE5
R-TW5
R-PV5
SP100594-WE1
SB100594WE1
PVF100594WE1
W1-TW1
W1-PV1
SP080150WE10
SB080150WE10
PVF080150WE10
50.8mm
A-TW10
A-PV10
19.1mm
Print
area
Self-Laminating Labels
36.5mm
12.7mm
Print
area
57.2mm
25.4mm
SP100143WE5
SB100143WE5
PVF100143WE5
O-TW10
O-PV10
25.4mm
SP200225WE2.5
SB200225WE2.5
PVF200225WE2.5
S-TW2.5
S-PV2.5
25.4mm
Print
area
SP100375WE2.5
SB100375WE2.5
PVF100375WE2.5
T-TW2.5
T-PV2.5
36.5mm
12.7mm
Print
area
19.1mm
Print
area
81.0mm
SB200143WE2.5
PVF200143WE2.5
P-TW5
P-PV5
19.1mm
23.9mm
48.3mm
95.3mm
50.8mm
SB190319WE2.5
PVF190319WE2.5
C1-TW2.5
C1-PV2.5
9.5mm
Print
area
SP075094WE10
Note: Drawing is not to scale
64
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Self-Laminating Label Dimensions
50.8mm
38.1mm
Print
area
25.4mm
38.1mm
Print
area
50.8mm
38.1mm
Print
area
SB200743WE1
PVF200743WE1
D3-TW1
D3-PV1
50.8mm
SB190594WE1
PVF190594WE1
25.4mm
Print
area
95.3mm
150.9mm
188.9mm
38.1mm
Print
area
SB100743WE1
PVF100743WE1
D1-TW1
D1-PV1
SP200375WE2.5
SB200375WE2.5
PVF200375WE2.5
U-TW2.5
U-PV2.5
Self-Laminating Labels
48.3mm
188.9mm
150.9mm
W2-TW1
W2-PV1
Wire and Harness ID Products
Self-Laminating Labels
Note: Drawing is not to scale
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
65
Wire and Harness ID Products
Self-Laminating Labels
TEK Hand writeable vinyl fabric labels
Tyco Electronics TEK vinyl fabric pocket packs are suitable for onthe-spot labeling. Thanks to their handy size they fit in the pocket
or the technician’s toolbox.
The packs are available in the most common label sizes. They can
be written on using the pencil (ZUB-03) or the felt-tip pen
(ZUB-01).
Features and benefits
Portability
On the spot labeling
Temperature rating
Operating temperature range
–29°C to +80°C
–20°F to +176°F
Properties
Self-Laminating Labels
Adhesive removal without residue (approx. 1 year). Very pliable film.
Age resistant. Fabric materials silicone free.
66
Resistant against
Water, sea water, alcohol, engine oils, methanol, petrol (gasoline)
Part numbering system
TEK
8 21 - N
Standard Packaging
Label width (mm)
Label height (mm)
Product family
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
TEK Hand writeable vinyl fabric labels
Ordering information
A
B
Available sizes and formats
Ordering
Markers/
description
pack
(A)
height
(B)
width
Black
Border
mm
inches
mm
inches
with
without
TEK 821-N
640
8.00
2.0
21.00
0.60
-
X
TEK 914-N
840
9.00
3.0
14.00
1.00
-
X
TEK 1119-N
440
11.00
6.0
19.00
1.00
X
-
TEK 1138-N
220
11.00
9.0
38.00
1.00
X
-
Accessories for manual marking
Ordering
Description
description
Wire and Harness ID Products
Self-Laminating Labels
Quantity per pack
Felt-tip pen, fine
1
ZUB-03
Pencil for UV-resistant labelling
1
Self-Laminating Labels
ZUB-01
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
67
Wire and Harness ID Products
Self-Laminating Labels
CMD Cable and wire marker dispenser
Tyco Electronics CMD is one of the most user friendly portable
wire marker systems available. Each dispenser contains 10 rolls of
individually numbered marker tape. Each roll of markers contains
76 individual markers which are a convenient length that accommodates most commonly identified wire sizes.
Manufactured from DuPont Tyvek® material to ensure durability
and minimize the potential of tearing.
Features and benefits
■
Supplied with a pre-determined length of 32mm and a width of
6.4mm
■
Supplied in a handy pocket size reusable dispenser
■
Aggressive acrylic adhesive impervious to oil and water
Temperature rating
Operating temperature range
–40°C to +80°C
–40°F to +176°F
Specifications/approvals
Tyco Electronics
TTDS-141
Self-Laminating Labels
Part numbering system
68
CMD - 0-9
Contents
Product family
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
CMD Cable and wire marker dispenser
Ordering information
A
B
Available sizes and formats
Ordering
Markers/
description
pack
(A)
height
(B)
width
Comments
mm
inches
mm
CMD-0-9
10 x 76
32.0
1.25
6.4
0.25
Loaded dispenser contains markers pre-marked 0 to 9
CMD-CC
10 x 76
32.0
1.25
6.4
0.25
Loaded dispenser contains colour coded markers
Wire and Harness ID Products
Self-Laminating Labels
inches
Extra Items
CMD-0-9-REFILL
10 x 76
32.0
1.25
6.4
0.25
Refill box pre-marked 0 to 9
CMD-CC-REFILL
10 x 76
32.0
1.25
6.4
0.25
Refill box colour coded
N/A
N/A
N/A
CMD-A-REFILL
10 x 76
32.0
1.25
6.4
0.25
Empty dispenser
Refill box pre-marked A
CMD-B-REFILL
10 x 76
32.0
1.25
6.4
0.25
Refill box pre-marked B
CMD-C-REFILL
10 x 76
32.0
1.25
6.4
0.25
Refill box pre-marked C
CMD-D-REFILL
10 x 76
32.0
1.25
6.4
0.25
Refill box pre-marked D
CMD-E-REFILL
10 x 76
32.0
1.25
6.4
0.25
Refill box pre-marked E
CMD-F-REFILL
10 x 76
32.0
1.25
6.4
0.25
Refill box pre-marked F
CMD-G-REFILL
10 x 76
32.0
1.25
6.4
0.25
Refill box pre-marked G
CMD-H-REFILL
10 x 76
32.0
1.25
6.4
0.25
Refill box pre-marked H
CMD-L-REFILL
10 x 76
32.0
1.25
6.4
0.25
Refill box pre-marked L
CMD-N-REFILL
10 x 76
32.0
1.25
6.4
0.25
Refill box pre-marked N
CMD-R-REFILL
10 x 76
32.0
1.25
6.4
0.25
Refill box pre-marked R
CMD-S-REFILL
10 x 76
32.0
1.25
6.4
0.25
Refill box pre-marked S
CMD-T-REFILL
10 x 76
32.0
1.25
6.4
0.25
Refill box pre-marked T
CMD-U-REFILL
10 x 76
32.0
1.25
6.4
0.25
Refill box pre-marked U
CMD-V-REFILL
10 x 76
32.0
1.25
6.4
0.25
Refill box pre-marked V
CMD-W-REFILL
10 x 76
32.0
1.25
6.4
0.25
Refill box pre-marked W
CMD-MINUS-REFILL
10 x 76
32.0
1.25
6.4
0.25
Refill box pre-marked -
CMD-PLUS-REFILL
10 x 76
32.0
1.25
6.4
0.25
Refill box pre-marked +
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
Self-Laminating Labels
CMD-EMPTY
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
69
Wire and Harness ID Products
Self-Laminating Labels
WCD Write-on self-laminating label dispensers
Tyco Electronics WCD is a pocket sized label dispenser containing
a roll of pre-cut self-laminating cable markers. Each market has a
white markable area for legend inscription using the specified
marker pen (ZUB-01).
Manufactured with a white coated area for writing on, and with a
clear wrap to wind around a wire or cable to cover the written legend and to protect it against impurities that would cause the label
to become illegible.
Features and benefits
■
Protects printed information from chemicals and frequent
handling
■
Supplied in a handy pocket size disposable dispenser
■
Aggressive acrylic adhesive impervious to oil and water
Temperature rating
Operating temperature range
–40°C to +80°C
–40°F to +176°F
Specifications/approvals
Self-Laminating Labels
Tyco Electronics
70
TTDS-140
Part numbering system
WCD - 318
Label Length (ex: 31.8 mm)
Product family
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
WCD Write-on self-laminating label dispensers
Ordering information
B
A
C
Available sizes and formats
Ordering
Markers/
description
pack
(A)
height
(B)
height
(C)
width
Max. Cable
diameter
mm
inches
mm
inches
mm
inches
WCD-318
300
31.8
1.25
7.95
0.31
19.0
0.75
7.6.2
0.30
WCD-476
150
47.6
1.87
12.7
0.50
19.0
0.75
10.16
0.40
WCD-762
90
76.2
3.0
19.0
0.75
19.0
0.75
17.78
0.70
WCD-1520
40
152.0
5.98
25.4
1.00
19.0
0.75
40.64
1.60
Accessories for manual marking
Ordering
Description
description
mm
Wire and Harness ID Products
Self-Laminating Labels
inches
Quantity per pack
Felt-tip pen, fine
1
ZUB-03
Pencil for UV-resistant labelling
1
Self-Laminating Labels
ZUB-01
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
71
Wire and Harness ID Products
Pre-Printed Wire and Cable Markers
K-Type® cable markers
K-Type® markers are used to identify wire bundles, cables, pipes
and conduits using specially designed oval shaped, individual
characters that slide on to a PVC carrier, which is then attached to
the substrate using cable ties. K-Type® markers are ideal for post
termination applications or where retrofit is anticipated.
These markers are supplied yellow with black legends and in the
standard International colour code option and are supplied on
reels. K-Type® markers come in one standard size to fit carrier
strips that can hold from 7 to 18 markers and are made from a
plasticized PVC material.
Features and benefits
Versatile marking system for cables , cable bundles and conduit
Elliptical marker profile allows easy fitting to carrier strips
Temperature rating
Operating temperature range
–40°C to +70°C
–40°F to +158°F
Specifications/approvals
Tyco Electronics
TTDS- 025
Pre-Printed Wire and Cable Markers
Part numbering system
72
1361 1 4 01
Legend code
Color code
Packaging code
Product/size code
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
K-Type® cable markers
Ordering information
Markers
Size code
Marker size
Marker Length (mm)
Cable diameter (mm)
Reel quantity
65
60
4.2 – 7.0
500
1361
Packaging Code
1 Reel
Color Code (Available for All Legends)
4 Yellow
9 White
International color code
Legend
Marker Color
Ink Color
Legend
Marker Color
Ink Color
Legend
Marker Color
0
Black
White
1
Brown
White
2
Red
Ink Color
Black
3
Orange
Black
4
Yellow
Black
5
Green
Black
6
Blue
Black
7
Violet
Black
8
Gray
Black
9
White
Black
Legend
Legend
Code
Legend
Code
0
Code
00
J
19
/
38
1
01
K
20
~
39
2
02
L
21
Earth
40
3
03
M
22
)
41
4
04
N
23
Blank
42
5
05
O
24
:
43
6
06
P
25
,
44
7
07
Q
26
<
45
8
08
R
27
>
46
9
09
S
28
=
47
A
10
T
29
.
48
B
11
U
30
C
12
V
31
D
13
W
32
E
14
X
33
F
15
Y
34
G
16
Z
35
H
17
+
36
I
18
-
37
Pre-Printed Wire and Cable Markers
Legend code
Carrier Strips
Order code
Capacity
Quantity
11320000
7 markers
500
11310000
12 markers
500
11300000
18 markers
250
11330000 *
12 markers
100
* This carrier can be used to flag
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
Wire and Harness ID Products
Pre-Printed Wire and Cble Markers
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
73
Wire and Harness ID Products
Pre-Printed Wire and Cable Markers
G-Type® push-on wire markers
G-Type® markers are individual push-on characters used to
identify wires and small cables. They are designed with an
expanding profile, enabling each marker to accommodate a wide
range of wire/cable sizes. The markers are supplied chevron cut
to ensure the legend remains aligned.
G-Type® markers are yellow with black legends and are supplied
as loose pieces packed in boxes.
G-Type® markers are particularly suitable for applications
requiring low fire hazard properties. They are made from a
self-extinguishing modified thermoplastic polymer and are
halogen, silicone and cadmium free.
Features and benefits
Low Fire Hazard
Zero halogen, self extinguishing material
Gusseted design allows marker to fit over a wide range
of cable diameters
Chevron cut ensures markers stay aligned
Specifications/approvals
Tyco Electronics
TTDS- 024
Temperature rating
Operating temperature range
–45°C to +70°C
–50°F to +158°F
Flammability
Pre-Printed Wire and Cable Markers
LOI 40%, FTI > 300°C
74
Part numbering system
0719 1 4 01
Legend code
Color code (4 = yellow only)
Packaging code (1 = box only)
Product/size code
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
G-Type® push-on wire markers
Ordering information
Size code
Marker size
Cable diameter (mm)
Box quantity
0719
G3/10
1.4 – 2.5
1000
0720
G3/20
2.0 – 3.5
1000
0721
G4/10
3.0 – 6.0
500
0722
G6/10
5.0 – 9.5
250
0723
G6/20
8.0 – 12.5
250
Packaging Code
1 Box
Color Code (Available for All Legends)
4 Yellow
Legend
Legend
Code
Legend
Code
0
Code
00
J
19
/
38
1
01
K
20
~
39
2
02
L
21
Earth
40
3
03
M
22
)
41
4
04
N
23
Blank
42
5
05
O
24
:
43
6
06
P
25
,
44
7
07
Q
26
<
45
8
08
R
27
>
46
9
09
S
28
=
47
A
10
T
29
.
48
B
11
U
30
L1
51
C
12
V
31
L2
52
D
13
W
32
L3
53
E
14
X
33
Serd
54
F
15
Y
34
PE
55
G
16
Z
35
PEN
56
H
17
+
36
(
62
I
18
-
37
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
Pre-Printed Wire and Cable Markers
Legend code
Wire and Harness ID Products
Pre-Printed Wire and Cable Markers
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
75
Wire and Harness ID Products
Pre-Printed Wire and Cable Markers
Z-Type® push-on wire markers
Z-Type® markers are individual push-on characters used to
identify wires and small cables permanently. They are designed
with an expanding profile, enabling each marker to accommodate
a wide range of wire/cable sizes.
Z-Type® markers are a simple, cost-effective solution for many
commercial wire identification applications. The markers are
supplied either straight cut or chevron cut: the chevron cut option
ensures the legends remain aligned. Standard Z-Type® markers
are yellow or white with black legends and can be supplied as
loose pieces packed in boxes or on reels. Color coded markers are
also available.
Features and benefits
Resistant to sea water, fuels and oils
9 sizes covering wire diameters from1.5mm to 12.7mm
(0.06 inches to 0.5 inches)
Applicator wands available for easy marker installation
Specifications/approvals
Tyco Electronics
TTDS- 026
Temperature rating
Pre-Printed Wire and Cable Markers
Operating temperature range
76
–45°C to +70°C
–50°F to +158°F
Part numbering system
0616 1 4 00
Legend code
Color code
Packaging code
Product/size code
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Z-Type® push-on wire markers
Ordering information
Size code
(straight cut)
Size code
(chevron cut)
Marker size
Marker Length (mm)
Pack quantity
mm
Cable diameter
inches
0580
1151
5
4.5
1000
1.5 - 2.0
0.06 - 0.08
0581
1152
7
4.5
1000
2.0 - 3.2
0.08 - 0.13
0615
1153
9
4.5
1000
2.5 - 4.0
0.10 - 0.16
0616
1154
11
4.5
1000
2.9 - 4.7
0.11 - 0.19
0617
1155
13
4.5
1000
3.4 - 5.7
0.13 - 0.22
0618
1156
15
4.5
1000
3.8 - 6.3
0.15 - 0.25
0620
1157
18
4.5
500
4.3 - 6.9
0.17 - 0.27
0622
1158
23
6.0
500
5.5 - 8.9
0.22 - 0.35
0624
1159
35
6.0
250
7.9 - 12.7
0.31 - 0.50
Packaging Code
1 Box
3 Reel
Color Code (Available for All Legends)
9 White
Packaging Options available
Straight Cut
White marker with black legend:
Yellow marker with black legend:
Color coded
Color Code
Legend
Chevron cut
White marker with black legend:
Yellow marker with black legend:
Color coded
Boxes, reels
Reels
Boxes
Marker Color
Ink Color
Marker Color
Ink Color
0
Black
White
1
Brown
White
2
Red
Black
3
Orange
Black
4
Yellow
Black
5
Green
Black
6
Blue
Black
7
Violet
Black
8
Gray
Black
9
White
Black
Order example: 06161400
Legend code
Legend
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
G
H
I
Legend
Boxes
Reels
Boxes, reels
Pre-Printed Wire and Cable Markers
4 Yellow
(Z-Type® markers, size 11, yellow marker with black legend 0, boxed)
Code
00
01
02
03
Legend
J
K
L
M
Code
19
20
21
22
Legend
/
~
Earth
)
Code
38
39
40
41
04
N
23
Blank
42
05
06
07
08
09
O
P
Q
R
S
24
25
26
27
28
:
,
<
>
=
43
44
45
46
47
10
11
T
U
29
30
.
48
12
13
14
V
W
X
31
32
33
15
16
17
Y
Z
+
34
35
36
18
-
37
Applicators
Order Code
12510000
12530000
12550000
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Marker Size
7
11
15
Pack Quantity
1
1
1
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Order Code
12520000
12540000
12560000
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Marker Size
9
13
18
Pack Quantity
1
1
1
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
Wire and Harness ID Products
Pre-Printed Wire and Cable Markers
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
77
Wire and Harness ID Products
Pre-Printed Wire and Cable Markers
V-Type™ Manual wire and cable markers
V-Type™ markers are individual push-on characters used to
identify wires and small cables permanently. They are designed
with an expanding profile, enabling each marker to accommodate
a wide range of wire/cable sizes.
V-Type™ markers are a simple, cost-effective solution for many
commercial wire identification applications. The markers are
supplied chevron cut and this ensures the legends remain aligned.
Standard V-Type™ markers are yellow or white with black legends
and can be supplied as loose pieces packed in boxes, on reels or
flat disc reels. Color coded markers are also available.
Features and benefits
Resistant to sea water, fuels and oils
4 sizes covering wire diameters from1.4mm to 16.0mm
(0.06 inches to 0.63 inches)
Specifications/approvals
Tyco Electronics
TTDS-096
Temperature rating
Pre-Printed Wire and Cable Markers
Operating temperature range
78
–45°C to +70°C
–50°F to +158°F
Part numbering system
0761 1 4 00
Mark/legend code
Color code
Packaging code
Size code
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
V-Type™ Manual wire and cable markers
Ordering information
Size code
Marker size
Cable diameter
Packed
inches
mm
0761
3
1.4 - 2.8
0.06 - 0.11
1000
0762
5
2.8 - 5.0
0.11 - 0.20
1000
0763
10
4.0 - 10.0
0.16 - 0.39
500
0764
15
8.0 - 16.0
0.31 - 0.63
250
Packaging Code
1 Box
3 Reel
Color Code (Available for All Legends)
4 Yellow
9 White
Color code (for numbers 0-9 only)
Legend
Marker Color
Ink Color
Legend
Marker Color
Ink Color
Legend
Marker Color
0
Black
White
1
Brown
White
2
Red
Ink Color
White
3
Orange
Black
4
Yellow
Black
5
Green
White
6
Blue
White
7
Violet
White
8
Gray
Black
9
White
Black
Wire and Harness ID Products
Pre-Printed Wire and Cable Markers
Legend
Legend
Code
Legend
Code
0
Code
00
J
19
/
38
1
01
K
20
~
39
2
02
L
21
Earth
40
3
03
M
22
)
41
4
04
N
23
Blank
42
5
05
O
24
:
43
6
06
P
25
,
44
7
07
Q
26
<
45
8
08
R
27
>
46
9
09
S
28
=
47
A
10
T
29
.
48
B
11
U
30
C
12
V
31
D
13
W
32
E
14
X
33
F
15
Y
34
G
16
Z
35
H
17
+
36
I
18
-
37
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
Pre-Printed Wire and Cable Markers
Mark/Legend code
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
79
O-Type™ Manual wire and cable markers
The O-Type™ markeris a thin walled plasticised PVC marker which
is particularly suited to high density wiring applications where
space saving is paramount.
They are color coded to BS3858: 1992 which includes repeated
printing of the individual digit three times around the circumference of the marker.
Letters and symbols are printed on a pink background.
Features and benefits
Conforms to BS3858: 192 Type 3
Color coding enables identification when mark is obscured
Thin wall for densely packed wiring
Nine sizes of marker cover cable sizes up to 16mm2
Temperature rating
Operating temperature range
Pre-Printed Wire and Cable Markers
Wire and Harness ID Products
Pre-Printed Wire and Cable Markers
80
–65°C to +95°C
–85°F to +203°F
Part numbering system
1106 99 10
Mark/Legend code
Color code
Size code
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
O-Type™ Manual wire and cable markers
Ordering information
Size Code
Part Cut
Cable Diameter
mm
Cable
Size
mm2
Marker
Size
Marker
Length mm
Packed
1106
0.6 - 1.0
-
0.75
3.0
1000
1107
0.9 - 1.3
-
10
4.0
1000
1108
1.1 - 1.6
-
12
3.0
1000
1109
1.4 - 2.1
-
15
3.0
1000
1110
1.9 - 2.8
-
20
5.0
1000
1111
2.4 - 3.5
1.0
25
5.0
1000
1112
2.9 - 4.8
1.5
30
5.0
1000
1113
3.9 - 5.8
2.5 & 4.0
40
5.0
1000
1114
5.3 - 8.0
6.0 & 10.0
55
5.0
1000
Color Code (Available for All Legends)
99 Pink
Color code (for numbers 0-9 only)
Legend
Marker Color
Ink Color
Legend
Marker Color
Ink Color
Legend
Marker Color
0
Black
White
1
Brown
White
2
Red
Ink Color
Black
3
Orange
Black
4
Yellow
Black
5
Green
Black
6
Blue
Black
7
Violet
Black
8
Gray
Black
9
White
Black
Wire and Harness ID Products
Pre-Printed Wire and Cable Markers
Legend
Legend
Code
Legend
Code
Legend
Code
0
Code
00
J
19
/
38
SO
57
1
01
K
20
~
39
-10
58
2
02
L
21
Earth
40
-1
59
3
03
M
22
)
41
-2
60
4
04
N
23
Blank
42
5
05
O
24
:
43
6
06
P
25
,
44
7
07
Q
26
<
45
8
08
R
27
>
46
9
09
S
28
=
47
A
10
T
29
Fullstop
48
B
11
U
30
Ä
49
C
12
V
31
Ö
50
D
13
W
32
L1
51
E
14
X
33
L2
52
F
15
Y
34
L3
53
G
16
Z
35
SERD
54
H
17
+
36
PE
55
I
18
-
37
PEN
56
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Pre-Printed Wire and Cable Markers
Legend code
81
Wire and Harness ID Products
Pre-Printed Wire and Cable Markers
82
Pre-Printed Wire and Cable Markers
Snap-On wire markers
Tyco Electronics snap-on markers are convenient and easy to use.
These markers are supplied on a ‘wand’ applicator that simplifies
and reduces installation time, and saves on the cost of marking.
Snap-on wire markers are designed to stand the test of time, preventing costly re-work before the life of the equipment ends. This is
why Tyco Electronics snap-on markers are found today in power
stations, oil refineries, offshore platforms, and other major projects
around the world.
Features and benefits
Snap-on markers are the perfect way to permanently and
rapidly mark cables, wires, leads, and cores after
termination and installation
Easy to alter identification on cables that are already marked
Secure grip for positive fixing to cable
The high elasticity of the marker enables all types of installation
and conduction material to be permanently
marked without damage
Applicator has a patented slit to prevent over-expansion of the
marker during application
Made from polyoxymethylene which guarantees strength,
dimensional stability, low moisture absorption, and
resistance to chemicals
Resistant against oils, cleaning agents, fuels, and
alkaline solutions
Zero-halogen material
Ten sizes for cable diameters 0.04" to 0.75"
(1.0mm to 19.0mm)
Color-coded option
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Specifications/approvals
Tyco Electronics
TTDS- 094
Temperature rating
Operating temperature range
–40°C to +106°C
–40°F to +223°F
Part numbering system
STD 06 W -4
Legend code
Color code (W=white)
Size
Snap-on Marker
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Snap-On wire markers
Ordering information
Size
Code
mm
Cable Diameter
Color of Applicator Wand
STD 01
1.00 - 1.40
0.040 - 0.055
Brown
STD 02
1.40 - 1.80
0.055 - 0.071
Gray
10 mounting wands with 30 identical markers
STD 03
1.90 - 2.65
0.075 - 0.104
Green
10 mounting wands with 30 identical markers
10 mounting wands with 30 identical markers
inches
Packed Box
10 mounting wands with 30 identical markers
STD 05
2.30 - 3.00
0.091 - 0.118
Natural
STD 06
2.60 - 3.50
0.102 - 0.138
Red
10 mounting wands with 30 identical markers
STD 09
3.25 - 4.50
0.128 - 0.177
Blue
10 mounting wands with 30 identical markers
STD12
4.50 - 6.00
0.177 - 0.236
Yellow
10 mounting wands with 30 identical markers
STD 15
5.80 - 8.50
0.228 - 0.335
Orange*
50 identical markers; applicator available on request
STD 17
8.50 - 11.50
0.335 - 0.452
Orange*
50 identical markers; applicator available on request
STD 21
11.00 - 15.50
0.433 - 0.610
Gray*
50 identical markers; applicator available on request
STD 24
15.00 - 19.00
0.590 - 0.750
Gray*
50 identical markers; applicator available on request
Color Code (Available for All Legends)
Y Yellow
W White
Legend
Legend
Code
Legend
Code
0
Code
0
J
J
/
Slash
1
1
K
K
Earth
Earth
2
2
L
L
Blank
Blank
3
3
M
M
:
Colon
4
4
N
N
=
Equals
5
5
O
O
.
Dot
6
6
P
P
7
7
Q
Q
8
8
R
R
9
9
S
S
A
A
T
T
B
B
U
U
C
C
V
V
D
D
W
W
E
E
X
X
F
F
Y
Y
G
G
Z
Z
H
H
+
Plus
I
I
-
Minus
Pre-Printed Wire and Cable Markers
Legend code
Applicators
Order Code
STD15 - Applicator
STD17 - Applicator
STD21 - Applicator
STD24- Applicator
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Marker Size
15
17
21
24
Color of Applicator
Orange
Orange
Gray
Gray
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Number of Applications
Per Pack
5
5
2
2
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
Wire and Harness ID Products
Pre-Printed Wire and Cable Markers
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
83
Wire and Harness ID Products
Pre-Printed Wire and Cable Markers
CWM Wire marker cards
Tyco Electronics CWM are pre-printed wire markers made with our
white vinyl coated cloth tape material, supplied on a thick, easy to
handle card stock, with a permanent, rubber based, pressure
sensitive adhesive for easy application. Ideal for basic wire marking
applications where pre-printed single or double-digit legends and
some resistance to a variety of solvents, water, oil, dirt and heat is
required.
Features and benefits
Convenient and easy to use
Pre-printed for on-site wire marking
Available in colors for color coding applications
Available in single and multiple digit legends
Specifications/approvals
Tyco Electronics
TTDS- 100
Temperature rating
–40°C to +82°C
–40°F to +180°F
Pre-Printed Wire and Cable Markers
Operating temperature range
84
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
CWM Wire marker cards
Ordering information
Product Order Code
Legend Option
Package Quantity
Label Width Label Height Card Width
mm
inches
mm
inches
6.4
0.250
38.1
1.500
Card Height
mm
inches
235.0
9.250
CWM-SL-# *
Solid Numbers 0-99
25 Cards (825 labels)
mm
50.8
inches
2.000
CWM-SL-letter *
Solid Letters A - Z
25 Cards (825 labels)
6.4
0.250
38.1
1.500
CWM-SL-color *
Solid Colors
25 Cards (825 labels)
6.4
0.250
38.1
1.500
235.0
9.250
50.8
2.000
235.0
9.250
50.8
CWM-SL-legend *
Solid 2+ Digits
25 Cards (825 labels)
6.4
0.250
38.1
2.000
1.500
235.0
9.250
50.8
CWM-SQ-1-33
Sequential 1 - 33
25 Cards (825 labels)
6.4
0.250
2.000
38.1
1.500
235.0
9.250
50.8
CWM-SQ-34-66
Sequential 34 - 66
25 Cards (825 labels)
6.4
2.000
0.250
38.1
1.500
235.0
9.250
50.8
CWM-SQ-67-99
Sequential 67 - 99
25 Cards (825 labels)
2.000
6.4
0.250
38.1
1.500
235.0
9.250
50.8
CWM-SQ-A-Z
Sequential A - Z
2.000
25 Cards (825 labels)
6.4
0.250
38.1
1.500
235.0
9.250
50.8
CWM-SQ-AA-ZZ
2.000
Sequential AA - ZZ
25 Cards (825 labels)
6.4
0.250
38.1
1.500
235.0
9.250
50.8
2.000
CWM-SQ-a-z
Sequential a - z
25 Cards (825 labels)
6.4
0.250
38.1
1.500
235.0
9.250
50.8
2.000
CWM-SQ-1-6
Sequential 1 - 6
25 Cards (825 labels)
6.4
0.250
38.1
1.500
235.0
9.250
50.8
2.000
CWM-SQ-1-18
Sequential 1 - 18
25 Cards (825 labels)
6.4
0.250
38.1
1.500
235.0
9.250
50.8
2.000
Pre-Printed Wire and Cable Markers
*Solid cards (SL) = 1 legend on each card. Select a single legend and add to the suffix of the product order code.
*Sequential cards (SQ) = a consecutive range of alpha or numeric legends on each card, as specified in the suffix of the product order code.
*Available options on product order code CWM-SL-legends are: T1, T2, T3, L1, L2, L3, GND, P1, A1, XS, PTO. Add legend suffix of order code.
Wire and Harness ID Products
Pre-Printed Wire and Cable Markers
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
85