Operational Amplifiers / Comparators Low Noise Operational Amplifiers BA4558F, BA4558R F/FV/FVM, BA4560F, BA4560R F/FV/FVM, BA4564RFV BA4580R F/FVM, BA4584FV, BA4584R F/FV, BA8522R F/FV/FVM BA15218F, BA14741F, BA15532F, BA4510F/FV, BA2115F/FVM No.11049EBT16 ●Description General-purpose BA4558 / BA4560 / BA15218 / BA14741 / BA15532 / BA4510 family and high-reliability BA4558R / BA4560R / BA4564R / BA4580R / BA4584 / BA4584R / BA8522R / BA2115 family integrate two or four independent Op-Amps on a single chip Especially, this series is suitable for any audio applications due to low noise and low distortion characteristics and are usable for other many applications by wide operating supply voltage range. BA4558R / BA4560R / BA4564R / BA4580R / BA4584R / BA8522R / BA2115 are high-reliability products with extended operating temperature range and high ESD tolerance. General purpose Dual BA4558R F/FV/FVM BA4560F Dual BA4560R F/FVM BA15218F Quad BA4564RFV BA14741F Dual BA4580R F/FV/FVM Dual BA15532F Quad BA4584FV Dual BA4510F/FV Quad BA4584R F/FV Dual BA4558F Dual Dual Quad High reliability ●Features 1) High voltage gain, low noise, low distortion 2) Wide operating supply voltage ±4.0[V]～±15.0[V]( split supply) (BA4560/BA4558/ BA4558R/BA4560R/ BA4564R family) ±2.0[V]～±16.0[V]( split supply) (BA4580R/ BA4584/BA8522R/BA15218 family) ±2.0[V]～±8.5[V]( split supply)(BA4584R family) ±2.0[V]～±18.0[V]( split supply)(BA14741 family) ±3.0[V]～±20.0[V]( split supply)(BA15532 family) ±1.0[V]～±3.5[V]( split supply)(BA4510 family) ±1.0[V]～±7.0[V]( split supply)(BA2115 family) 3) Internal phase compensation 4) 5) 6) Dual BA8522R F/FV/FVM Dual BA2115F/FVM No latch up immunity Internal ESD protection Human body mode (HBM) ±5000[V](Typ.) (BA4558R/BA4560R/BA4564R/BA4580R/BA4584/ BA4584R/BA8522R/BA2115 family) Wide temperature range -40[℃]～+85[℃] (BA4558/BA4560/BA4584/BA15218/BA14741/ BA2115 family) -40[℃]～+105[℃] (BA4558R/BA4560R/BA4564R/BA4580R/BA4584R/ BA8522R family) ●Pin Assignments 8 VCC OUT1 1 -IN1 2 +IN1 3 VEE CH2 + - BA4558RF BA4560RF BA4580RF BA8522RF BA2115F www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 6 -IN2 5 +IN2 4 SOP8 BA4558F BA4560F BA15218F BA15532F BA4510F 7 OUT2 CH1 - + 14 OUT4 OUT1 1 -IN1 2 +IN1 3 12 +IN4 VCC 4 11 VEE +IN2 5 -IN2 6 OUT2 7 CH1 - + CH4 + - 13 -IN4 10 +IN3 - + CH2 + CH3 9 -IN3 8 OUT3 SSOP-B8 MSOP8 SOP14 SSOP-B14 BA4558RFV BA4560RFV BA4510FV BA8522RFV BA4558RFVM BA4560RFVM BA4580RFVM BA8522RFVM BA2115FVM BA14741F BA4584RF BA4564RFV BA4584FV BA4584RFV 1/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Absolute maximum rating (Ta=25[℃]) ○BA4558/BA4558R family Parameter Supply Voltage Differential Input Voltage Ratings Symbol BA4558 family VCC-VEE (*1) Unit BA4558R family +36 V Vid VCC-VEE 36 V Input common-mode voltage range Vicm VEE～VCC (VEE-0.3)～VEE+36 V Operating Supply Voltage Vopr Operating Temperature Topr -40～+85 -40～+105 ℃ Storage Temperature Tstg -55～+125 -55～+150 ℃ Tjmax +125 +150 ℃ Maximum Junction Temperature 8～30 (±4～±15) V Note: Absolute maximum rating item indicates the condition which must not be exceeded. Application of voltage in excess of absolute maximum rating or use out absolute maximum rated temperature environment may cause deterioration of characteristics. (*1) The voltage difference between inverting input and non-inverting input is the differential input voltage. Then input terminal voltage is set to more than VEE. ●Electrical characteristics ○BA4558 family (Unless otherwise specified VCC=+15[V], VEE=-15[V], Ta=25[℃]) Limits Temperature BA4558F Unit Parameter Symbol Range Min. Typ. Max. Condition Input Offset Voltage (*2) Vio 25℃ - 0.5 6 mV VOUT=0[V] Input Offset Current (*2) Iio 25℃ - 5 200 nA VOUT=0[V] Input Bias Current (*3) Ib 25℃ - 60 500 nA VOUT=0[V] Supply Current ICC 25℃ - 3 6 mA RL=∞ All Op-Amps VIN+=0[V] Maximum Output Voltage VOM 25℃ ±10 ±13 - 25℃ ±12 ±14 - Large Signal Voltage Gain AV 25℃ 86 100 - dB Vicm 25℃ ±12 ±14 - V Common-mode Rejection Ratio CMRR 25℃ 70 90 - dB Ri≦10[kΩ] Power Supply Rejection Ratio PSRR 25℃ 76.3 90 - dB Ri≦10[kΩ] Slew Rate SR 25℃ - 1.0 - Channel Separation CS 25℃ - 105 - Input Common-mode Voltage Range (*2) (*3) V RL≧2[kΩ] RL≧10[kΩ] RL≧2[kΩ], VOUT=±10[V], Vicm=0[V] V/μs AV=0[dB], RL≧2[kΩ] dB f=1[kHz] Absolute value Current direction: Since first input stage is composed with PNP transistor, input bias current flows out of IC. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 2/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Electrical characteristics ○BA4558R family (Unless otherwise specified VCC=+15[V], VEE=-15[V], Ta=25[℃], Full range -40[℃]～+105[℃]) Limits Temperature BA4558R F/FV/FVM Parameter Unit Condition Symbol Range Min. Typ. Max. Input Offset Voltage (*4) Vio Input Offset Current (*4) Iio Input Bias Current (*5) Ib Supply Current ICC Maximum Output Voltage VOH Large Signal Voltage Gain Input Common-mode Voltage Range AV Vicm 25℃ - 0.5 6 Full range - - 7 25℃ - 5 200 Full range - - 200 25℃ - 60 500 Full range - - 800 25℃ - 3 6 Full range - - 6.5 25℃ ±10 ±13 - Full range ±10 - - 25℃ ±12 ±14 - 25℃ 86 100 - Full range 83 - - 25℃ ±12 ±14 - Full range ±12 - - mV VOUT=0[V] nA VOUT=0[V] nA VOUT=0[V] mA RL=∞ All Op-Amps VIN+=0[V] V RL≧2[kΩ] RL≧10[kΩ] dB RL≧2[kΩ], VOUT=±10[V], Vicm=0[V] V VOUT=±12[V] Common-mode Rejection Ratio CMRR 25℃ 70 90 - dB VOUT=±12[V] Power Supply Rejection Ratio PSRR 25℃ 76.5 90 - dB Ri≦10[kΩ] Channel Separation CS 25℃ - 105 - dB R1=100[Ω], f=1[kHz] Slew Rate SR 25℃ - 1 - V/μs AV=0[dB], RL=2[kΩ] CL=100[pF] ft 25℃ - 2 - MHz RL=2[kΩ] THD 25℃ - 0.005 - % Vn 25℃ - 12 - nV/ Hz Unity Gain Frequency Total Harmonic Distortion Input Referred Noise Voltage (*4) (*5) AV=20[dB], RL=10[kΩ] VIN=0.05[Vrms], f=1[kHz] RS=100[Ω], Vi=0[V], f=1[kHz] Absolute value Current direction: Since first input stage is composed with PNP transistor, input bias current flows out of IC. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 3/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Absolute maximum rating (Ta=25[℃]) ○BA4560/BA4560R/BA4564R family Parameter Symbol Supply Voltage Ratings BA4560 family BA4560R family VCC-VEE (*6) BA4564R family +36 Unit V Differential Input Voltage Input Common-mode voltage range Operating Supply Voltage Vid VCC-VEE 36 V Vicm VEE～VCC (VEE-0.3)～VEE+36 V Operating Temperature Topr -40～+85 -40～+105 ℃ Tstg -55～+125 -55～+150 ℃ Tjmax +125 +150 ℃ Storage Temperature Maximum junction Temperature Vopr 8～30 (±4～±15) V Note: Absolute maximum rating item indicates the condition which must not be exceeded. Application of voltage in excess of absolute maximum rating or use out absolute maximum rated temperature environment may cause deterioration of characteristics. (*6) The voltage difference between inverting input and non-inverting input is the differential input voltage. Then input terminal voltage is set to more than VEE. ●Electrical characteristics ○BA4560 family (Unless otherwise specified VCC=+15[V], VEE=-15[V], Ta=25[℃]) Limits Temperature Parameter Symbol BA4560F Unit Range Min. Typ. Max. Condition Input Offset Voltage (*7) Vio 25℃ - 0.5 6 mV VOUT=0[V] Input Offset Current (*7) Iio 25℃ - 5 200 nA VOUT=0[V] Input Bias Current (*8) Ib 25℃ - 50 500 nA VOUT=0[V] Supply Current ICC 25℃ - 4 7.5 mA RL=∞ All Op-Amps, VIN+=0[V] Maximum Output Voltage VOH 25℃ ±12 ±14 - 25℃ ±10 ±13 - Large Signal Voltage Gain AV 25℃ 86 100 - dB RL≧2[kΩ], VO=±10[V], Vicm=0[V] Vicm 25℃ ±12 ±14 - V VOUT=±12[V] Common-mode Rejection Ratio CMRR 25℃ 70 90 - dB VOUT=±12[V] Power Supply Rejection Ratio PSRR 25℃ 76.3 90 - dB Ri≦10[kΩ] SR 25℃ - 4 - V/μs AV=0[dB], RL=2[kΩ] GBW 25℃ - 10 - MHz f=10[kHz] Vn 25℃ - - 2.2 Input Common-mode Voltage Range Slew Rate Unity Gain Frequency Input Referred Noise Voltage (*7) (*8) V μVrms RL≧10[kΩ] RL≧2[kΩ] RS=2.2[Ω], RIAA BW=10[kHz]～30[kHz] Absolute value Current direction: Since first input stage is composed with PNP transistor, input bias current flows out of IC. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 4/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Electrical characteristics ○BA4560R family (Unless otherwise specified VCC=+15[V], VEE=-15[V], Full range -40[℃]～+105[℃]) Limits Temperature BA4560R F/FV/FVM Parameter Symbol Unit Condition Range Min. Typ. Max. Input Offset Voltage (*9) Vio Input Offset Current (*9) Iio Input Bias Current (*10) Ib Supply Current ICC Maximum Output Voltage VOH Large Signal Voltage Gain AV Input Common-mode Voltage Range Vicm 25℃ - 0.5 6 Full range - - 7 25℃ - 5 200 Full range - - 200 25℃ - 50 500 Full range - - 800 25℃ - 3 7 Full range - - 7.5 25℃ ±12 ±14 - Full range ±10 ±11.5 - 25℃ 86 100 - Full range 83 - - 25℃ ±12 ±14 - Full range ±12 - - mV VOUT=0[V] nA VOUT=0[V] nA VOUT=0[V] mA RL=∞ All Op-Amps VIN+=0[V] V RL≧2[kΩ] Io=25[mA] dB RL≧2[kΩ], VO=±10[V], Vicm=0[V] V VOUT=±12[V] Common-mode Rejection Ratio CMRR 25℃ 70 90 - dB VOUT=±12[V] Power Supply Rejection Ratio PSRR 25℃ 76.5 90 - dB Ri≦10[kΩ] Channel Separation CS 25℃ - 105 - dB R1=100[Ω], f=1[kHz] Slew Rate SR 25℃ - 4 - V/μs ft 25℃ - 4 - MHz RL=2[kΩ] THD 25℃ - 0.003 - % Vn 25℃ - 8 - nV/ Hz Unity Gain Frequency Total Harmonic Distortion Input Referred Noise Voltage AV=0[dB], RL=10[kΩ] CL=100[pF] AV=20[dB], RL=10[kΩ] VIN=0.05[Vrms], f=1[kHz] RS=100[Ω], Vi=0[V], f=1[kHz] (*9) Absolute value (*10) Current direction: Since first input stage is composed with PNP transistor, input bias current flows out of IC. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 5/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Electrical characteristics ○BA4564R family (Unless otherwise specified VCC=+15[V], VEE=-15[V], Full range -40[℃]～+105[℃]) Limits Temperature BA4564RFV Parameter Symbol Unit Condition Range Min. Typ. Max. Input Offset Voltage (*11) Vio Input Offset Current (*11) Iio Input Bias Current (*12) Ib Supply Current ICC Maximum Output Voltage VOH Large Signal Voltage Gain AV Input Common-mode Voltage Range Vicm 25℃ - 0.5 6 Full range - - 7 25℃ - 5 200 Full range - - 200 25℃ - 50 500 Full range - - 800 25℃ - 6 14 Full range - - 15 25℃ ±12 ±14 - Full range ±10 ±11.5 - 25℃ 86 100 - Full range 83 - - 25℃ ±12 ±14 - Full range ±12 - - mV VOUT=0[V] nA VOUT=0[V] nA VOUT=0[V] mA RL=∞ All Op-Amps VIN+=0[V] V RL≧2[kΩ] dB RL≧2[kΩ], VOUT=±10[V], Vicm=0[V] V VOUT=±12[V] Common-mode Rejection Ratio CMRR 25℃ 70 90 - dB VOUT=±12[V] Power Supply Rejection Ratio PSRR 25℃ 76.5 90 - dB Ri≦10[kΩ] Channel Separation CS 25℃ - 105 - dB R1=100[Ω], f=1[kHz] Slew Rate SR 25℃ - 4 - V/μs AV=0[dB], RL=10[kΩ] CL=100[pF] ft 25℃ - 4 - MHz RL=2[kΩ] THD 25℃ - 0.003 - % Vn 25℃ - 8 - nV/ Hz Unity Gain Frequency Total Harmonic Distortion Input Referred Noise Voltage AV=20[dB], RL=10[kΩ] VIN=0.05[Vrms], f=1[kHz] RS=100[Ω], Vi=0[V], f=1[kHz] (*11) Absolute value (*12) Current direction: Since first input stage is composed with PNP transistor, input bias current flows out of IC. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 6/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Absolute maximum rating (Ta=25[℃]) ○BA4580/BA4584/BA4584R/BA8522R family Parameter Symbol Supply Voltage (*13) Differential Input Voltage BA4584R family BA8522R family +36 Vid 36 Vicm Operating Supply Voltage Vopr Output current Iout Operating Temperature Topr Maximum Junction Temperature BA4580R family BA4584 family VCC-VEE Input Common-mode Voltage Range Storage Temperature Ratings V V VEE～VEE+36 4～32 (±2～±16) -40～+105 Unit 4～19 (±2～±8.5) ±50 -40～+85 (VEE-0.3)～ VEE+36 4～32 (±2～±16) V V mA -40～+105 ℃ Tstg -55～+150 ℃ Tjmax +150 ℃ Note Absolute maximum rating item indicates the condition which must not be exceeded. Application of voltage in excess of absolute maximum rating or use out absolute maximum rated temperature environment may cause deterioration of characteristics. (*13) The voltage difference between inverting input and non-inverting input is the differential input voltage. Then input terminal voltage is set to more than VEE. ●Electrical characteristics ○BA4580R family (Unless otherwise specified VCC=+15[V], VEE=-15[V], Ta=25[℃]) Limits Temperature Unit BA4580R F/FVM Parameter Symbol Range Min. Typ. Max. Condition Input Offset Voltage (*14) Vio 25℃ - 0.3 3 mV Input Offset Current (*14) Iio 25℃ - 5 200 nA Input Bias Current (*15) Ib 25℃ - 100 500 nA Large Signal Voltage Gain AV 25℃ 90 110 - dB RL≧10[kΩ], VOUT=±10[V] Maximum Output Voltage VOM 25℃ ±12 ±13.5 - V RL≧2[kΩ] Input Common-mode Voltage Range Vicm 25℃ ±12 ±13.5 - V Common-mode Rejection Ratio CMRR 25℃ 80 110 - dB Rs≦10[kΩ] Power Supply Rejection Ratio PSRR 25℃ 80 110 - dB Rs≦10[kΩ] Supply Current ICC 25℃ - 6 9 mA RL=∞ All Op-Amps, VIN+=0[V] Slew Rate SR 25℃ - 5 - V/μs RL≧2[kΩ] ft 25℃ - 5 - MHz RL=2[kΩ] THD 25℃ - 0.0005 - % Av=20[dB], VOUT=5[Vrms] RL=2[kΩ], f=1[kHz] 20[Hz]~20[kHz] BPF Vn 25℃ - 0.8 - μVrms RIAA, Rs=2.2 [kΩ], 30[kHz] LPF Unity Gain Frequency Total Harmonic Distortion Input Referred Noise Voltage Rs≦10[kΩ] (*14) Absolute value (*15) Current direction: Since first input stage is composed with PNP transistor, input bias current flows out of IC. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 7/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ●Electrical characteristics ○BA4584 family (Unless otherwise specified VCC=+15[V], VEE=-15[V], Ta=25[℃]) Limits Temperature BA4584FV Parameter Symbol Unit Range Min. Typ. Max. Technical Note Condition Input Offset Voltage (*16) Vio 25℃ - 0.3 3 mV Input Offset Current (*16) Iio 25℃ - 5 200 nA Input Bias Current (*17) Ib 25℃ - 100 500 nA Large Signal Voltage Gain AV 25℃ 90 110 - dB RL≧10[kΩ], VOUT=±10[V] Maximum Output Voltage VOM 25℃ ±12 ±13.5 - V RL≧2[kΩ] Input Common-mode Voltage Range Vicm 25℃ ±12 ±13.5 - V Common-mode Rejection Ratio CMRR 25℃ 80 110 - dB Rs≦10[kΩ] Power Supply Rejection Ratio PSRR 25℃ 80 110 - dB Rs≦10[kΩ] Supply Current ICC 25℃ - 12 18 mA RL=∞ All Op-Amps, VIN+=0[V] Slew Rate SR 25℃ - 5 - V/μs RL≧2[kΩ] ft 25℃ - 5 - MHz RL=2[kΩ] THD 25℃ - 0.0005 - Vn 25℃ - 0.8 - Unity Gain Frequency Total Harmonic Distortion Input Referred Noise Voltage Rs≦10[kΩ] Av=20[dB], VOUT=5[Vrms] RL=2[kΩ]f=1[kHz] 20[Hz]～20[kHz] BPF RIAA, Rs=2.2[kΩ], μVrms 30[kHz] LPF % (*16) Absolute value (*17) Current direction: Since first input stage is composed with PNP transistor, input bias current flows out of IC. ●Electrical characteristics ○BA4584R family (Unless otherwise specified VCC=+9.5[V], VEE=-9.5[V], Ta=25[℃]) Limits Temperature BA4584R F/FV Parameter Symbol Unit Range Min. Typ. Max. Condition Input Offset Voltage (*18) Vio 25℃ - 0.3 3 mV Input Offset Current (*18) Iio 25℃ - 5 200 nA Input Bias Current (*19) Ib 25℃ - 100 500 nA Large Signal Voltage Gain AV 25℃ 90 110 - dB RL≧10[kΩ], VOUT=±10[V] Maximum Output Voltage VOM 25℃ ±6.5 ±8 - V RL≧2[kΩ] Input Common-mode Voltage Range Vicm 25℃ ±6.5 ±8 - V Common-mode Rejection Ratio CMRR 25℃ 80 110 - dB Rs≦10[kΩ] Power Supply Rejection Ratio PSRR 25℃ 80 110 - dB Rs≦10[kΩ] Supply Current ICC 25℃ - 11 17 mA RL=∞ All Op-Amps, VIN+=0[V] Slew Rate SR 25℃ - 5 - V/μs RL≧2[kΩ] ft 25℃ - 5 - MHz RL=2[kΩ] THD 25℃ - 0.0005 - Vn 25℃ - 0.8 - Unity Gain Frequency Total Harmonic Distortion Input Referred Noise Voltage Rs≦10[kΩ] Av=20[dB], VOUT=5[Vrms] RL=2[kΩ], f=1[kHz] 20[Hz]～20[kHz] BPF RIAA, Rs=2.2[kΩ], μVrms 30[kHz] LPF % (*18) Absolute value (*19) Current direction: Since first input stage is composed with PNP transistor, input bias current flows out of IC. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 8/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ●Electrical characteristics ○BA8522R family (Unless otherwise specified VCC=+15[V], VEE=-15[V], Ta=25[℃]) Limits Temperature BA8522R F/FV/FVM Parameter Symbol Unit Range Min. Typ. Max. Input Offset Voltage (*20) Input Offset Voltage drift (*20) Vio 25℃ Vio/ΔT - 0.1 1.5 mV - 2 - μV/℃ Input Offset Current (*20) Iio 25℃ - 5 200 nA Input Bias Current (*21) Ib 25℃ - 50 500 nA Supply Current ICC 25℃ - 5.5 9 mA Maximum Output Voltage VOM 25℃ ±12 ±13.5 ±10.5 ±11 Large Signal Voltage Gain AV 25℃ 86 Vicm 25℃ Common-mode Rejection Ratio CMRR Power Supply Rejection Ratio Technical Note Condition RL=∞ All Op-Amps VIN+=0[V] V RL≧10[kΩ] - V RL≧2[kΩ] 110 - dB RL≧10[kΩ], VOUT=±10[V] ±12 ±14 - V 25℃ 70 90 - dB PSRR 25℃ 76.5 90 - dB Channel Separation CS 25℃ - 105 - dB Slew Rate SR 25℃ - 3 - V/μs ft 25℃ - 6 - MHz Vni 25℃ - 1.2 - μVrms THD 25℃ - 0.002 - % Input Common-mode Voltage Range Unity Gain Frequency Input Referred Noise Voltage Total Harmonic Distortion Av=20[dB], VOUT=5[Vrms] f=1[kHz] (*20) Absolute value (*21) Current direction: Since first input stage is composed with PNP transistor, input bias current flows out of IC. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 9/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Absolute maximum rating (Ta=25[℃]) ○BA15218/BA14741/BA15532 family Parameter Symbol Supply Voltage Differential Input Voltage Ratings BA15218 family VCC-VEE (*22) Vicm Operating Supply Voltage Vopr Input Current Operating Temperature Storage Temperature Output Short Current (*24) Output Short Time (*24) BA15532 family 36 Vid Input Common-mode voltage range BA14741 family Unit 42 V (*23) VCC-VEE ±0.5 V VEE～VCC 4～32 (±2～±16) V 4～36 (±2～±18) 6～40 (±3～±20) V Ii - ±10 mA Topr -40+85 -20～+75 ℃ Tstg -55～+125 Iomax ±50 Ts - ℃ - unlimited (only 1CH short) mA unlimited Sec Note: Absolute maximum rating item indicates the condition which must not be exceeded. Application of voltage in excess of absolute maximum rating or use out absolute maximum rated temperature environment may cause deterioration of characteristics. (*22) The voltage difference between inverting input and non-inverting input is the differential input voltage. Then input terminal voltage is set to more than VEE. (*23) Don’t over input current ±10mA. Built-in resistor for protection because of over current with differential input voltage above 0.5 . (*24) Limit within Pd. ●Electrical characteristics ○BA15218 family (Unless otherwise specified VCC=+15[V], VEE=-15[V], Ta=25[℃]) Limits Temperature BA15218F Parameter Symbol Unit Range Min. Typ. Max. Condition Input Offset Voltage (*25) Vio 25℃ - 0.5 5.0 mV Input Offset Current (*25) Iio 25℃ - 5 200 nA Input Bias Current (*26) Ib 25℃ - 50 500 nA Large Signal Voltage Gain Av 25℃ 86 110 - dB Vicm 25℃ ±12 ±14 - V Common-mode Rejection Ratio CMRR 25℃ 70 90 - dB Rs≦10[kΩ] Power Supply Rejection Ratio PSRR 25℃ 76 90 - dB Rs≦10[kΩ] ICC 25℃ - 5.0 8.0 mA Vin=0, RL=∞ VOH 25℃ ±12 ±14 - V RL≧10[kΩ] VOL 25℃ ±10 ±13 - V RL≧2[kΩ] SR 25℃ - 3.0 - V/μs GV=0[dB], RL=2[kΩ] GBW 25℃ - 10 - MHz f=10[KHz] Input Referred Noise Voltage Vn 25℃ - 1.0 - μVrms Channel Separation CS 25℃ - 120 - dB Input Common-mode Voltage Range Supply Current Maximum Output Voltage Slew Rate Gain Bandwidth Product Rs≦10[kΩ] RL≧2[kΩ], Vo=±10[V] RS=1[kΩ], BW=20[Hz]～30[kHz], RIAA f=1[kHz] input referred (*25) Absolute value (*26) Current direction: Since first input stage is composed with PNP transistor, input bias current flows out of IC. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 10/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ●Electrical characteristics ○BA14741 family (Unless otherwise specified VCC=+15[V], VEE=-15[V], Ta=25[℃]) Limits Temperature BA14741F Parameter Symbol Unit Range Min. Typ. Max. Input Offset Voltage (*27) Vio 25℃ - 1.0 5.0 mV Input Offset Current (*27) Iio 25℃ - 10 50 nA Input Bias Current (*28) Ib 25℃ - 60 300 nA Av 25℃ 20 100 - CMRR 25℃ 80 100 - Large Signal Voltage Gain Common-mode Rejection Ratio Vicm 25℃ ±12 ±13.5 - V PSRR 25℃ 80 100 - dB ICC 25℃ - 3.0 7.0 mA VOH 25℃ 10 12.5 - VOL 25℃ -10 -12.5 - Source IOH 25℃ 10 20 - Sink IOL 25℃ 5 10 - Slew Rate SR 25℃ - 1.0 - Input Referred Noise Voltage Vn 25℃ - 2.0 4.0 Channel Separation CS 25℃ - 100 - Maximum Output Current Rs≦10[kΩ] dB Power Supply Rejection Ratio Maximum Output Voltage Condition V/mV RL≧2[kΩ], Vo=±10[V] Input Common-mode Voltage Range Supply Current Technical Note RL=∞ All Op-Amps Vin+=1[V], Vin-=0[V], V RL=2[kΩ] Vin+=0[V], Vin-=1[V], V RL=2[kΩ] Vin+=1[V], Vin-=0[V], mA VO=0[V] Vin+=0[V], Vin-=1[V], mA VO=0[V] V/μs Av=1, RL=2[kΩ] RIAA, Rs=2.2[kΩ], μVrms 10[Hz]~30[kHz] dB f=1[kHz ] input referred (*27) Absolute value. (*28) Current direction: Since first input stage is composed with PNP transistor, input bias current flows out of IC. ●Electrical characteristics ○BA15532 family (Unless otherwise specified VCC=+15[V], VEE=-15[V], Ta=25[℃]) Limits Temperature BA15532F Parameter Symbol Unit Range Min. Typ. Max. Condition Input Offset Voltage (*29) Vio 25℃ - 0.5 4.0 mV Rs=50[Ω], RL≧10[kΩ] Input Offset Current (*29) Iio 25℃ - 10 150 nA RL≧10[kΩ] Ib 25℃ - 200 800 nA RL≧10[kΩ] Input Bias Current (*30) Large Signal Voltage Gain Common-mode Rejection Ratio Av 25℃ 80 94 - dB RL≧600[Ω], Vo=±10[V] CMRR 25℃ 70 100 - dB RL≧10[kΩ] Input Common-mode Voltage Range Vicm 25℃ ±12 ±13 - V RL≧10[kΩ] Power Supply Rejection Ratio PSRR 25℃ 80 100 - dB Rs=50[Ω], RL≧10[kΩ] Icc 25℃ - 8.0 16.0 mA RL=∞ All Op-Amps VOH 25℃ ±12 ±13 - V VOL 25℃ ±15 ±16 - V lOS 25℃ - 38 - mA SR 25℃ - 8.0 - GBW 25℃ - 20 - Input Referred Noise Voltage Vn 25℃ - 0.7 1.5 Channel Separation CS 25℃ - 110 - Supply Current Maximum Output Voltage Output Short Current (*31) Slew Rate Gain Bandwidth Product RL≧600[Ω] RL≧600[Ω] VCC=18[V], VEE=-18[V] Av=1, RL=600[Ω], CL=100[pF] f=10[kHz], RL=600[Ω], MHz CL=100[pF] RIAA, Rs=100[Ω], μVrms 20[Hz]~30[kHz] dB RIAA Input referred V/μs (*29) Absolute value (*30) Current direction: Since first input stage is composed with NPN transistor, input bias current flows out of IC. (*31) In the case of output pin shorting with VCC or VEE. But never over the maximum power dissipation www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 11/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Absolute maximum rating (Ta=25[℃]) ○BA4510/BA2115 family Parameter Ratings Symbol Supply Voltage VCC-VEE Differential Input Voltage (*32) BA4510 family BA2115 family 10 14 Unit V Vid VCC-VEE 14 V Input Common-mode Voltage Range Vicm VEE～VCC (VEE-0.3)～VEE+14 V Operating Supply Voltage Vopr 2～7(±1~±3.5) 2～14(±1~±7) V Operating Temperature Topr -20～+75 -40～+85 ℃ Storage Temperature Tstg -40～125 -55～150 ℃ Tjmax 125 150 ℃ Maximum Junction Temperature Note: Absolute maximum rating item indicates the condition which must not be exceeded. Application of voltage in excess of absolute maximum rating or use out absolute maximum rated temperature environment may cause deterioration of characteristics. (*32) The voltage difference between inverting input and non-inverting input is the differential input voltage. Then input terminal voltage is set to more than VEE. ●Electrical characteristics ○BA4510 family (Unless otherwise specified VCC=+2.5[V], VEE=-2.5[V], Ta=25[℃]) Limits Temperature BA4510F/FV Unit Parameter Symbol Range Min. Typ. Max. Input Offset Voltage (*33) Vio 25℃ - 1 6 mV Input Offset Current (*33) Iio 25℃ - 2 200 nA Input Bias Current (*34) Ib 25℃ - 80 500 nA Supply Current Maximum Output Voltage Large Signal Voltage Gain Input Common-mode Voltage Range Rs=50[Ω] ICC 25℃ 2.5 5.0 7.5 mA VOH 25℃ +2.0 +2.4 - V VOL 25℃ - -2.4 -2.0 V RL=10[kΩ] Av 25℃ 60 90 - dB RL≧10[kΩ] Vicm 25℃ -1.3 - +1.5 V Common-mode Rejection Ratio CMRR 25℃ 60 80 - dB Power Supply Rejection Ratio PSRR 25℃ 60 80 - dB SR 25℃ - 5.0 - Slew Rate Condition RL=∞ All Op-Amps RL=10[kΩ] Rs=50[Ω] V/μs Av=1 (*33) Absolute value (*34) Current direction: Since first input stage is composed with PNP transistor, input bias current flows out of IC. ●Electrical characteristics ○BA2115 family (Unless otherwise specified Parameter VCC=+2.5[V], VEE=-2.5[V], Ta=25[℃]) Limits Temperature BA2115F/FVM Symbol Unit Range Min. Typ. Max. Input Offset Voltage (*35) Vio 25℃ - (*35) Iio 25℃ Ib 25℃ Supply Current ICC Maximum Output Voltage Large Signal Voltage Gain Input Offset Current Input Bias Current (*36) Input Common-mode Voltage Range mV Condition 1 6 VOUT=0[V], Vicm=0[V] - 2 200 nA VOUT=0[V], Vicm=0[V] - 150 400 nA 25℃ - 3.5 5 mA VOM 25℃ ±2.0 ±2.2 - V AV 25℃ 60 80 - dB VOUT=0[V], Vicm=0[V] RL=∞ All Op-Amps, VIN+=0[V] RL≧2.5[kΩ] RL≧10[kΩ], VOUT=±2[V], Vicm=0[V] Vicm 25℃ ±1.5 - - V Common-mode Rejection Ratio CMRR 25℃ 60 74 - dB Vicm=-1.5[V]～+1.5[V] Power Supply Rejection Ratio dB VCC=+2[V]～+14[V] PSRR 25℃ 60 80 - Slew Rate SR 25℃ - 4 - V/μs AV=0[dB], VIN=±1[V] Gain Bandwidth Product GB 25℃ - 12 - MHz f=10[kHz] (*35) Absolute value (*36) Current direction: Since first input stage is composed with PNP transistor, input bias current flows out of IC. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 12/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Reference Data BA4558 family BA4558 family BA4558 family 5.0 BA4558 family 5.0 BA4558F 600 400 200 0 0 25 50 25℃ -40℃ 3.0 2.0 85℃ 1.0 100 2.0 BA4558 family 5 10 15 20 25 SUPPLY VOLTAGE [V] 1.0 30 35 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] 100 Fig.3 Supply Current - Ambient Temperature BA4558 family 20 25 ±7.5 V ±4 V Fig. 2 Supply Current - Supply Voltage BA4558 family 20 15 15 10 10 20 15 10 5 OUTPUT VOLTAGE [V] VOH OUTPUT VOLTAGE [V] MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] Fig. 1 Derating Curve VOH 5 0 -5 VOL -10 5 0 -5 -10 -15 0 0.1 1 -20 0.1 10 VOL -15 -20 1 LOAD RESISTANCE [kΩ] LOAD RESISTANCE [kΩ] 10 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 ±18 SUPPLY VOLTAGE [V] Fig.4 Maximum Output Voltage Swing - Load Resistance Fig.5 Maximum Output Voltage - Load Resistance Fig.6 Maximum Output Voltage - Supply Voltage (VCC/VEE=+15[V]/-15[V], Ta=25[℃]) (VCC/VEE=+15[V]/-15[V], Ta=25[℃]) (RL=2[kΩ], Ta=25[℃]) BA4558 family 20 15 15 10 10 VOH 5 0 -5 VOL -10 BA4558 family 20 OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] ±15V 3.0 0.0 0 125 AMBIENT TEMPERTURE [℃] . 30 4.0 0.0 85 75 4.0 SUPPLY CURRENT [mA] SUPPLY CURRENT [mA] 800 VOH 5 0 -5 VOL -10 -15 -15 -20 -50 0 25 50 75 0 100 5 10 15 20 OUTPUT CURRENT [mA] Fig.7 Maximum Output Voltage - Ambient Temperature Fig.8 Maximum Output Voltage - Output Current (VCC/VEE=+15[V]/-15[V], RL=2[kΩ]) (VCC/VEE=+15[V]/-15[V], Ta=25[℃]) BA4558 family -40℃ 2 0 85℃ 25℃ -2 -4 ±0 25 AMBIENT TEMPERATURE [℃] ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] Fig.9 Input Offset Voltage - Supply Voltage (Vicm=0[V], Vout=0[V]) BA4558 family 80 ±2 BA4558 family 80 70 ±4V 2 ±7.5V 0 ±15V -2 -4 85℃ 60 50 40 -40℃ 30 25℃ 20 10 0 -6 -50 -25 0 25 50 75 100 INPUT BIAS CURRENT [nA] 70 4 INPUT BIAS CURRENT [nA] INPUT OFFSET VOLTAGE [mV] . 6 4 -6 -20 -25 BA4558 family 6 INPUT OFFSET VOLTAGE [mV] POWER DISSIPATION [mW] . . 1000 ±4V 60 50 40 ±7.5V ±15V 30 20 10 0 ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] AMBIENT TEMPERATURE [℃] -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] Fig.10 Input Offset Voltage - Ambient Temperature Fig.11 Input Bias Current - Supply Voltage Fig.12 Input Bias Current - Ambient Temperature (Vicm=0[V], Vout=0[V]) (Vicm=0[V], Vout=0[V]) (Vicm=0[V], Vout=0[V]) (*)The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 13/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note 25℃ 10 BA4558 family 30 -40℃ 0 -10 85℃ -20 -30 20 10 ±4V ±7.5V 0 ±15V -10 -20 4 3 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] -40℃ 2 25℃ 1 0 -1 85℃ -2 -3 -4 -30 ±0 BA4558 family 5 INPUT OFFSET VOLTAGE [mV] 20 BA4558 family INPUT OFFSET CURRENT [nA] . 30 INPUT OFFSET CURRENT [nA] ●Reference Data BA4558 family -5 -50 -25 0 25 50 75 100 0 2 4 6 8 COMMON MODE INPUT VOLTAGE [V] AMBIENT TEMPERATURE [°C] Fig.13 Input Offset Current - Supply Voltage Fig.14 Input Offset Current Ambient Temperature (Vicm=0[V], Vout=0[V]) Fig.15 Input Offset Voltage - Common Mode Input Voltage 100 75 50 25 0 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [°C] . 125 100 75 50 -25 0 25 50 75 AMBIENT TEMPERATURE [? ] 100 Fig.17 Power Supply Rejection Ratio - Ambient Temperature (VCC/VEE=+15[V]/-15[V], Vicm=-12[V] to +12[V]) (VCC/VEE=+4[V]/-4[V] to +15[V]/-15[V]) BA4558 family TOTAL HARMONIC DISTORTION [%] . EQUIVALENT INPUT NOISE VOLTAGE [nV/√Hz] . 0 1 100 FREQUENCY [Hz] 10000 20kHz 0.01 1kHz 0.001 20Hz 0.0001 0.1 1 OUTPUT VOLTAGE [Vrms] ±4 ±6 ±8 ±10 ±12 SUPPLY VOLTAGE [V] ±14 ±16 (CL=100[pF], RL=2[kΩ], Ta=25[℃]) 1 0.1 ±2 Fig.18 Slew Rate - Supply Voltage BA4558 family 20 0.5 0.0 -50 40 1.0 0 100 60 1.5 25 Fig.16 Common Mode Rejection Ratio - Ambient Temperature 80 BA4558 family 2.0 SLEW RATE [V/μs] 125 (VCC=8[V], Vout=4[V]) BA4558 family 150 10 MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] POWER SUPPLY REJECTION RATIO [dB] . COMMON MODE REJECTION RATIO [dB] (Vicm=0[V], Vout=0[V]) BA4558 family 150 BA4558 family 30 25 20 15 10 5 0 1 10 100 FREQUENCY [kHz] 1000 Fig.19 Equivalent Input Noise Voltage - Frequency Fig.20 Total Harmonic Distortion -Output Voltage Fig.21 Maximum Output Voltage Swing - Frequency (VCC/VEE=+15[V]/-15[V],Rs=100[Ω],Ta=25[℃]) (VCC/VEE=+15[V]/-15[V], Av=20[dB], RL=2[kΩ], 80[kHz]-LPF, Ta=25[℃]) (VCC/VEE=+15[V]/-15[V], RL=2[kΩ], Ta=25[℃]) BA4558 family 60 0 50 -30 40 -60 30 -90 GAIN 20 -120 10 -150 0 1 .E+00 PHASE [deg] VOLT AGE GAIN [dB] PHASE -180 1.E+02 1.E+04 1.E+06 1.E+08 F REQUENC Y [H z] Fig. 22 Voltage Gain - Frequency (VCC/VEE=+15[V]/-15[V],Av=40[dB],RL=2[kΩ],Ta=25[℃]) (*)The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 14/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Reference Data BA4558 family BA4558R family BA4558R family 5.0 BA4558R family 5.0 BA4558RF BA4558RFV 400 BA4558RFVM 200 0 3.0 2.0 105℃ 1.0 OUTPUT VOLTAGE [V] 1.0 10 15 20 25 SUPPLY VOLTAGE [V] 30 35 -50 20 15 10 BA4558R family 5 15 10 10 VOH 0 -5 VOL -10 0 -5 -10 1 LOAD RESISTANCE [kΩ] -20 0.1 10 VOL -15 -20 0.1 VOH 5 -15 0 1 LOAD RESISTANCE [kΩ] 10 ±4 ±6 ±8 ±10 ±12 ±14 SUPPLY VOLTAGE [V] Fig. 26 Maximum Output Voltage Swing - Load Resistance Fig. 27 Maximum Output Voltage - Load Resistance Fig. 28 Maximum Output Voltage - Supply Voltage (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) (RL=2[kΩ],Ta=25[℃]) BA4558R family 10 10 OUTPUT VOLTAGE [V] 15 VOH 0 VOL -5 -10 BA4558R family 20 15 5 -15 VOH 5 0 -5 VOL -10 -15 -20 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] 125 4 -40℃ 2 25℃ 0 105℃ -2 -4 -6 0 5 10 15 20 25 ±2 ±4 ±6 OUTPUT CURRENT [mA] Fig. 30 Maximum Output Voltage - Output Current (VCC/VEE=+15[V]/-15[V],RL=2[kΩ]) (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) BA4558R family ±10 ±12 ±14 ±16 Fig. 31 Input Offset Voltage - Supply Voltage (Vicm=0[V], Vout=0[V]) BA4558R family BA4558R family 50 ±4V 2 ±7.5V 0 -2 ±15V -4 -6 40 30 -40℃ INPUT BIAS CURRENT [nA] 4 INPUT BIAS CURRENT [nA] INPUT OFFSET VOLTAGE [mV] . 50 ±8 SUPPLY VOLTAGE [V] Fig.29 Maximum Output Voltage - Ambient Temperature 6 ±16 BA4558R family 6 -20 -50 125 BA4558R family 20 15 5 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] Fig.25 Supply Current - Ambient Temperature INPUT OFFSET VOLTAGE [mV] MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] 5 20 25 20 OUTPUT VOLTAGE [V] ±7.5 V Fig.24 Supply Current - Supply Voltage BA4558R family 30 ±4 V 2.0 0.0 0 Fig. 23 Derating Curve ±15V 3.0 0.0 105 25 50 75 100 125 AMBIENT TEMPERTURE [℃] . 0 4.0 25℃ OUTPUT VOLTAGE [V] 600 -40℃ 4.0 SUPPLY CURRENT [mA] 800 SUPPLY CURRENT [mA] POWER DISSIPATION [mW] . . 1000 25℃ 20 10 105℃ -25 0 25 50 75 100 125 AMBIENT TEMPERATURE [℃] 30 ±4V ±7.5V 20 10 ±15V 0 0 -50 40 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] -50 -25 0 25 50 75 100 125 AMBIENT TEMPERATURE [℃] Fig. 32 Input Offset Voltage - Ambient Temperature Fig.33 Input Bias Current - Supply Voltage Fig. 34 Input Bias Current - Ambient Temperature (Vicm=0[V], Vout=0[V]) (Vicm=0[V], Vout=0[V]) (Vicm=0[V],, Vout=0[V]) (*)The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 15/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ●Reference Data BA4558 family BA4558 family 60 BA4558R family 60 BA4558R family 5 -40℃ 20 105℃ 0 -20 25℃ -40 INPUT OFFSET VOLTAGE [mV] INPUT OFFSET CURRENT [nA] INPUT OFFSET CURRENT [nA] 4 40 40 ±4V 20 ±15V 0 ±7.5V -20 -40 3 2 1 0 -1 -40℃ -2 25℃ -3 105℃ -4 -60 -60 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] -5 -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [°C] Fig. 35 (Vicm=0[V], Vout=0[V]) BA4558R family 75 50 25 0 100 75 50 0 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] 125 ±2 ±4 ±6 ±8 ±10 ±12 ±14 SUPPLY VOLTAGE [V] ±16 Fig. 40 Slew Rate - Supply Voltage (CL=100[pF],RL=2[kΩ],Ta=25[℃]) (VCC/VEE=+4[V]/-4[V] to +15[V]/-15[V]) BA4558R family BA4558R family TOTAL HARMONIC DISTORTION [%] 1 0 20kHz 0.1 1kHz 0.01 0.001 20Hz 0.0001 100 FREQUENCY [Hz] 0.0 Fig. 39 Power Supply Rejection Ratio - Ambient Temperature (VCC/VEE=+15[V]/-15[V],Vicm=-12[V] to +12[V]) 20 1.0 0.5 -50 40 1.5 25 125 60 BA4558R family . 125 Fig. 38 Common Mode Rejection Ratio - Ambient Temperature 1 (VCC=8[V], Vout=4[V]) 2.0 SLEW RATE [V/μs] POWER SUPPLY REJECTION RATIO [dB] 100 80 Fig. 37 Input Offset Voltage - Common Mode Input Voltage BA4558R family 150 125 -25 0 25 50 75 100 AMBIENT TEMPERATURE [°C] 2 4 6 8 COMMON MODE INPUT VOLTAGE [V] . Input Offset Current - Ambient Temperature (Vicm=0[V], Vout=0[V]) -50 0 Fig. 36 Input Offset Current - Supply Voltage 150 EQUIVALENT INPUT NOISE VOLTAGE [nV/√Hz] . 125 10000 0.1 1 OUTPUT VOLTAGE [Vrms] 10 MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] ±0 COMMON MODE REJECTION RATIO [dB] Technical Note 30 BA4558R family 25 20 15 10 5 0 1.E+01 1.E+02 1.E+03 1.E+04 1.E+05 1.E+06 FREQUENCY [Hz] Fig. 41 Equivalent Input Noise Voltage - Frequency Fig. 42 Total Harmonic Distortion - Output Voltage (VCC/VEE=+15[V]/-15[V],Rs=100[Ω],Ta=25[℃]) Fig. 43 Maximum Output Voltage Swing - Frequency (VCC/VEE=+15[V]/-15[V],Av=20[dB], RL=2[kΩ],80[kHz]-LPF,Ta=25[℃]) (VCC/VEE=+15[V]/-15[V],RL=2[kΩ],Ta=25[℃]) BA4558R family 60 0 -30 40 -60 30 -90 GAIN 20 -120 10 -150 0 1.E+00 1.E+02 1.E+04 1.E+06 PHASE [deg] VOLTAGE GAIN [dB] PHASE 50 -180 1.E+08 FREQUENCY [Hz] Fig. 44 Voltage Gain - Frequency (VCC/VEE=+15[V]/-15[V],Av=40[dB],RL=2[kΩ],Ta=25[℃]) (*)The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 16/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Reference Data BA4560 family BA4560 family BA4560 family 8.0 BA4560 family 8.0 BA4560F 600 400 200 0 0 25 50 75 25℃ 4.0 85℃ 2.0 100 125 0 AMBIENT TEMPERATURE TEMPERTURE [℃] AMBIENT [℃] . 5 BA4560 family 4.0 ±4 V 2.0 30 -50 35 15 10 5 15 VOH 10 VOH 10 5 0 -5 VOL -10 5 0 -5 -10 -20 0.1 10 1 LOAD RESISTANCE [kΩ] Fig. 48 Maximum Output Voltage Swing - Load Resistance -5 VOL -10 VOH 5 0 -5 VOL -10 -15 -15 -20 -50 (RL=2[kΩ],Ta=25[℃]) -20 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] ±6 ±8 ±10 ±12 ±14 ±16 ±18 SUPPLY VOLTAGE [V] BA4560 family 6 INPUT OFFSET VOLTAGE [mV] 10 OUTPUT VOLTAGE [V] 15 10 0 ±4 Fig. 50 Maximum Output Voltage - Supply Voltage BA4560 family 20 15 5 ±2 (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) BA4560 family VOH 10 Fig. 49 Maximum Output Voltage - Load Resistance (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) 20 VOL -15 -20 1 LOAD RESISTANCE [kΩ] 100 BA4560 family 20 -15 0 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] Fig. 47 Supply Current - Ambient Temperature 15 20 ±15V ±7.5 V BA4560 family 20 25 0.1 OUTPUT VOLTAGE [V] 10 15 20 25 SUPPLY VOLTAGE [V] Fig. 46 Supply Current - Supply Voltage OUTPUT VOLTAGE [V] MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] Fig. 45 Derating Curve 6.0 0.0 0.0 85 30 -40℃ 6.0 SUPPLY CURRENT [mA] SUPPLY CURRENT [mA] 800 OUTPUT VOLTAGE [V] POWER DISSIPATION [mW] . 1000 4 -40℃ 25℃ 2 0 -2 85℃ -4 -6 0 100 5 10 15 20 25 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 OUTPUT CURRENT [mA] SUPPLY VOLTAGE [V] Maximum Output Voltage - Ambient Temperature Fig. 52 Maximum Output Voltage - Output Current Fig. 53 Input Offset Voltage - Supply Voltage (VCC/VEE=+15[V]/-15[V], RL=2[kΩ]) (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) Fig. 51 BA4560 family BA4560 family 80 BA4560 family 60 70 ±4V ±7.5V 2 0 ±15V -2 -4 50 60 -40℃ 50 25℃ 40 30 20 85℃ 10 -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] Fig. 54 Input Offset Voltage - Ambient Temperature (Vicm=0[V], Vout=0[V]) ±4V 40 30 ±7.5V ±15V 20 10 0 0 -6 INPUT BIAS CURRENT [nA] 4 INPUT BIAS CURRENT [nA] INPUT OFFSET VOLTAGE [mV] . 6 (Vicm=0[V], Vout=0[V]) ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 -50 -25 0 25 50 75 100 SUPPLY VOLTAGE [V] AMBIENT TEMPERATURE [℃] Fig. 55 Input Bias Current - Supply Voltage Fig. 56 Input Bias Current - Ambient Temperature (Vicm=0[V], Vout=0[V]) (Vicm=0[V], Vout=0[V]) (*)The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 17/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note -40℃ 10 BA4560 family 30 25℃ 0 -10 85℃ -20 BA4560 family 5 4 20 10 INPUT OFFSET VOLTAGE [mV] 20 BA4560 family INPUT OFFSET CURRENT [nA] . 30 INPUT OFFSET CURRENT [nA] ●Reference Data BA4560 family ±7.5V ±4V 0 ±15V -10 -20 85℃ 3 25℃ 2 -40℃ 1 0 -1 -2 -3 -4 -30 -30 ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] -5 -50 Fig. 57 100 Input Offset Current - Ambient Temperature (Vicm=0[V], Vout=0[V]) (Vicm=0[V], Vout=0[V]) BA4560 family 5 SLEW RATE [V/µ s] 100 50 25 0 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [°C] 75 50 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] Fig. 61 Power Supply Rejection Ratio - Ambient Temperature (VCC/VEE=+15[V]/-15[V], Vicm=-12[V] to +12[V]) (VCC/VEE=+4[V]/-4[V] to +15[V]/-15[V]) BA4560 family TOTAL HARMONIC DISTORTION [%] 40 20 1 100 FREQUENCY [Hz] 20kHz 0.01 1kHz 0.001 20Hz 0.1 1 OUTPUT VOLTAGE [Vrms] ±6 ±8 ±10 ±12 SUPPLY VOLTAGE [V] ±14 ±16 RL=2[kΩ], Ta=25[℃]) 0.1 10000 ±4 Fig. 62 Slew Rate - Supply Voltage (CL=100[pF], 0.0001 0 ±2 BA4560 family 1 60 2 100 Fig. 60 Common Mode Rejection Ratio - Ambient Temperature 80 3 0 0 100 4 1 25 10 MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] 75 BA4560 family . POWER SUPPLY REJECTION RATIO [dB] . (VCC=8[V], Vout=4[V]) 6 125 100 2 4 6 8 COMMON MODE INPUT VOLTAGE [V] Fig. 59 Input Offset Voltage -Common Mode Input Voltage BA4560 family 150 125 EQUIVALENT INPUT NOISE VOLTAGE [nV/√Hz] 0 Fig. 58 Input Offset Current - Supply Voltage 150 COMMON MODE REJECTION RATIO [dB] -25 0 25 50 75 AMBIENT TEMPERATURE [°C] BA4560 family 30 25 20 15 10 5 0 1 10 100 FREQUENCY [KHz] 1000 Fig. 63 Equivalent Input Noise Voltage - Frequency Fig. 64 Total Harmonic Distortion - Output Voltage Fig. 65 Maximum Output Voltage Swing - Frequency (VCC/VEE=+15[V]/-15[V],Rs=100[Ω],Ta=25[℃]) (VCC/VEE=+15[V]/-15[V], Av=20[dB], RL=2[kΩ],80[kHz]-LPF,Ta=25[℃]) (VCC/VEE=+15[V]/-15[V],RL=2[kΩ],Ta=25[℃]) BA4560 family 50 180 PHASE 40 160 140 30 120 GAIN 100 20 80 PHASE [deg] VOLTAGE GAIN[dB] 200 60 10 40 20 0 1.E+00 0 1.E+02 1.E+04 1.E+06 1.E+08 SUPPLY VOLTAGE [V] Fig. 66 Voltage Gain - Frequency (VCC/VEE=+15[V]/-15[V], Av=40[dB], RL=2[kΩ], Ta=25[℃]) (*)The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 18/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Reference Data BA4560R family BA4560R family BA4560R family 5.0 BA4560RF BA4560RFV 600 400 BA4560RFVM 200 0 25 50 2.0 105℃ 1.0 30 15 10 5 10 VOH 5 0 -5 1 LOAD RESISTANCE [kΩ] VOL -10 1 LOAD RESISTANCE [kΩ] 10 OUTPUT VOLTAGE [V] 15 10 0 -5 VOL -10 -15 10 0 25 50 75 100 VOH 5 0 -5 VOL -10 0 5 10 15 20 Fig. 74 Maximum Output Voltage - Output Current (VCC/VEE=+15[V]/-15[V], RL=2[kΩ]) (VCC/VEE=+15[V]/-15[V], Ta=25[℃]) 0 -2 ±15V -4 50 75 100 -4 ±4 ±6 ±8 ±10 ±12 ±14 ±16 BA4560R family . 200 180 160 160 140 120 25℃ 100 -40℃ 80 60 40 105℃ 125 AMBIENT TEMPERATURE [℃] Fig.76 Input Offset Voltage - Ambient Temperature (Vicm=0[V], Vout=0[V]) 140 120 ±4V ±7.5V 100 80 60 40 ±15V 20 0 0 25 105℃ -2 180 -6 0 0 (Vicm=0[V], Vout=0[V]) 20 -25 25℃ Fig. 75 Input Offset Voltage - Supply Voltage INPUT BIAS CURRENT [nA] ±7.5V -40℃ 2 SUPPLY VOLTAGE [V] . ±4V 2 4 ±2 BA4560R family 200 INPUT BIAS CURRENT [nA] INPUT OFFSET VOLTAGE [mV] 4 ±16 BA4560R family 6 25 Fig. 73 Maximum Output Voltage - Ambient Temperature BA4560R family ±8 ±10 ±12 ±14 SUPPLY VOLTAGE [V] -6 125 OUTPUT CURRENT [mA] 6 ±6 (RL=2[kΩ],Ta=25[℃]) BA4560R family AMBIENT TEMPERATURE [℃] -50 ±4 -20 -25 VOL Fig. 72 Maximum Output Voltage - Supply Voltage -15 -20 -50 -10 (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) 20 15 VOH 0 -5 Fig. 71 Maximum Output Voltage - Load Resistance BA4560R family 5 5 -20 (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) 20 VOH 10 -15 0.1 10 125 BA4560R family 15 -20 0.1 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] 20 -15 0 1.0 Fig. 69 Supply Current - Ambient Temperature OUTPUT VOLTAGE [V] 20 ±7.5 V -50 15 25 ±4 V 2.0 35 BA4560R family Fig. 70 Maximum Output Voltage Swing - Load Resistance OUTPUT VOLTAGE [V] 10 15 20 25 SUPPLY VOLTAGE [V] 20 OUTPUT VOLTAGE [V] MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] 5 Fig. 68 Supply Current - Supply Voltage BA4560R family 3.0 0.0 0 Fig. 67 Derating Curve ±15V 4.0 3.0 75 30 25℃ 0.0 105 100 125 AMBIENT TEMPERATURE [℃] . 0 -40℃ 4.0 SUPPLY CURRENT [mA] SUPPLY CURRENT [mA] 800 BA4560R family 5.0 INPUT OFFSET VOLTAGE [mV] POWER DISSIPATION [mW] . . 1000 ±2 ±4 ±6 ±8 ±10 ±12 ±14 SUPPLY VOLTAGE [V] ±16 Fig. 77 Input Bias Current - Supply Voltage (Vicm=0[V], Vout=0[V]) ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] Fig. 78 Input Bias Current - Ambient Temperature (Vicm=0[V], Vout=0[V]) (*)The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 19/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Reference Data BA4560R family . BA4560R family BA4560R family 60 BA4560R family 5 40 -40℃ 105℃ 20 0 -20 25℃ -40 INPUT OFFSET VOLTAGE [mV] 4 INPUT OFFSET CURRENT [nA] INPUT OFFSET CURRENT [nA] 60 40 ±4V 20 ±15V 0 ±7.5V -20 -40 3 2 1 0 -1 -40℃ -2 25℃ -3 105℃ -4 -60 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] -50 (Vicm=0[V], Vout=0[V]) (Vicm=0[V], Vout=0[V]) 75 50 25 0 BA4560R family 125 4.0 100 75 50 0 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] 125 20 BA4560R family 20kHz 0.1 1kHz 0.01 0.001 20Hz 0.0001 0 0.1 10000 Fig. 85 Equivalent Input Noise Voltage - Frequency PHASE 40 10 (VCC/VEE=+15[V]/-15[V], Av=20[dB], RL=2[kΩ], 80[kHz]-LPF, Ta=25[℃]) BA4560R family 30 25 20 15 10 5 0 10 100 1000 10000 100000 100000 0 FREQUENCY [Hz] Fig. 87 Maximum Output Voltage Swing - Frequency (VCC/VEE=+15[V]/-15[V], RL=2[kΩ], Ta=25[℃]) -30 -90 GAIN 20 -120 10 -150 0 (CL=100[pF], RL=2[kΩ], Ta=25[℃]) 0 -60 30 ±16 PHASE [deg] 50 1 OUTPUT VOLTAGE [Vrms] Fig. 86 Total Harmonic Distortion - Output Voltage (VCC/VEE=+15[V]/-15[V], Rs=100[Ω], Ta=25[℃]) 60 ±6 ±8 ±10 ±12 ±14 SUPPLY VOLTAGE [V] Fig. 84 Slew Rate - Supply Voltage MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] TOTAL HARMONIC DISTORTION [%] 40 ±4 (VCC/VEE=+4[V]/-4[V] to +15[V]/-15[V]) 1 60 BA4560R family ±2 Fig. 83 Power Supply Rejection Ratio - Ambient Temperature BA4560R family 100 FREQUENCY [Hz] 2.0 0.0 -50 (VCC/VEE=+15[V]/-15[V], Vicm=-12[V] to +12[V]) 1 3.0 1.0 25 125 BA4560R family 5.0 . 150 Fig. 82 Common Mode Rejection Ratio - Ambient Temperature 80 Fig. 81 Input Offset Voltage -Common Mode Input Voltage SLEW RATE [V/μs] 100 -25 0 25 50 75 100 AMBIENT TEMPERATURE [°C] 2 4 6 8 COMMON MODE INPUT VOLTAGE [V] (VCC=8[V], Vout=4[V]) BA4560R family -50 0 125 Fig. 80 Input Offset Current - Ambient Temperature 125 EQUIVALENT INPUT NOISE VOLTAGE [nV/√Hz] . -25 0 25 50 75 100 AMBIENT TEMPERATURE [°C] Fig. 79 Input Offset Current - Supply Voltage POWER SUPPLY REJECTION RATIO [dB] . COMMON MODE REJECTION RATIO [dB] ±2 150 VOLTAGE GAIN [dB] -5 -60 ±0 -180 1.E+00 1.E+02 1.E+04 1.E+06 FREQUENCY [Hz] 1.E+08 Fig. 88 Voltage Gain - Frequency (VCC/VEE=+15[V]/-15[V], Av=40[dB], RL=2[kΩ], Ta=25[℃]) (*)The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 20/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Reference Data BA4564R family BA4564R family BA4564R family 12.0 BA4564R family 12.0 10.0 600 400 200 8.0 25℃ 6.0 4.0 0 5 10 15 20 25 SUPPLY VOLTAGE [V] 30 -50 35 15 10 5 15 15 10 10 VOH 5 0 -5 VOL -10 1 LOAD RESISTANCE [kΩ] 0 -5 -10 VOL -15 -20 0.1 10 VOH 5 -20 0.1 1 LOAD RESISTANCE [kΩ] 10 ±4 ±6 ±8 ±10 ±12 ±14 SUPPLY VOLTAGE [V] Fig. 92 Maximum Output Voltage Swing - Load Resistance Fig. 93 Maximum Output Voltage -Load Resistance Fig. 94 Maximum Output Voltage -Supply Voltage (VCC/VEE=+15[V]/-15[V], Ta=25[℃]) (VCC/VEE=+15[V]/-15[V], Ta=25[℃]) (RL=2[kΩ], Ta=25[℃]) BA4564R family 15 10 10 OUTPUT VOLTAGE [V] 15 VOH 5 0 -5 VOL -10 BA4564R family 20 -15 VOH 5 0 -5 VOL -10 -15 -20 -50 125 0 5 10 15 20 -40℃ 2 105℃ -2 -4 ±2 ±4 ±6 Fig. 96 Maximum Output Voltage - Output Current (VCC/VEE=+15[V]/-15[V], RL=2[kΩ]) (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) ±10 ±12 ±14 ±16 Fig. 97 Input Offset Voltage - Supply Voltage (Vicm=0[V], Vout=0[V]) BA4564R family BA4564R family 200 ±4V ±7.5V 2 0 ±15V -2 -4 180 180 160 160 140 -40℃ INPUT BIAS CURRENT [nA] 4 INPUT BIAS CURRENT [nA] INPUT OFFSET VOLTAGE [mV] . 200 ±8 SUPPLY VOLTAGE [V] OUTPUT CURRENT [mA] BA4564R family 25℃ 0 25 Fig. 95 Maximum Output Voltage - Ambient Temperature 6 4 -6 -20 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] ±16 BA4564R family 6 INPUT OFFSET VOLTAGE [mV] 20 125 BA4564R family 20 -15 0 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] Fig. 91 Supply Current - Ambient Temperature OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] 20 ±7.5V 2.0 BA4564R family 20 25 ±4V 4.0 Fig. 90 Supply Current - Supply Voltage BA4564R family 30 6.0 0.0 25 50 75 100 AMBIENT TEMPERATURE [℃ ] Fig. 89 Derating Curve ±15V 8.0 0.0 105 125 0 MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] 105℃ 2.0 0 OUTPUT VOLTAGE [V] 10.0 -40℃ SUPPLY CURRENT [mA] BA4564RFV 800 SUPPLY CURRENT [mA] SUPPLY CURRENT [mA] . 1000 25℃ 120 100 80 60 105℃ 40 -25 0 25 50 75 100 125 AMBIENT TEMPERATURE [℃] 100 80 60 ±15V 40 0 0 -50 ±7.5V ±4V 120 20 20 -6 140 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] -50 -25 0 25 50 75 100 125 AMBIENT TEMPERATURE [ ℃] Fig. 98 Input Offset Voltage - Ambient Temperature Fig. 99 Input Bias Current - Supply Voltage Fig. 100 Input Bias Current - Ambient Temperature (Vicm=0[V], Vout=0[V]) (Vicm=0[V], Vout=0[V]) (Vicm=0[V], Vout=0[V]) (*)The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 21/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Reference Data BA4564R family BA4564R family 60 BA4564R family 60 BA4564R family 5 INPUT OFFSET CURRENT [nA] -40℃ 20 105℃ 0 -20 25℃ -40 INPUT OFFSET VOLTAGE [mV] INPUT OFFSET CURRENT [nA] 4 40 40 ±4V 20 ±15V 0 ±7.5V -20 -40 -40℃ 3 25℃ 2 105℃ 1 0 -1 -2 -3 -4 -60 -60 ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] -5 -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [°C] 125 Fig. 101 Input Offset Current - Supply Voltage Fig. 102 Input Offset Current - Ambient Temperature (Vicm=0[V], Vout=0[V]) (Vicm=0[V], Vout=0[V]) 0 Fig. 103 Input Offset Voltage - Common Mode Input Voltage . (VCC=8[V], Vout=4[V]) 75 50 25 0 -25 0 25 50 75 100 AMBIENT TEMPERATURE [°C] . 75 50 0 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] 125 Fig. 105 Power Supply Rejection Ratio - Ambient Temperature (VCC/VEE=+15[V]/-15[V], Vicm=-12[V] to +12[V]) (VCC/VEE=+4[V]/-4[V] to +15[V]/-15[V]) BA4564R family TOTAL HARMONIC DISTORTION [%] 1 60 40 20 0.1 20kHz 1kHz 0.01 0.001 20Hz 0.0001 1 100 FREQUENCY [Hz] 0.1 10000 Fig. 107 Equivalent Input Noise Voltage - Frequency BA4564R family 60 PHASE 1 OUTPUT VOLTAGE [Vrms] 10 Fig. 108 Total Harmonic Distortion - Output Voltage (VCC/VEE=+15[V]/-15[V],Rs=100[Ω],Ta=25[℃]) (VCC/VEE=+15[V]/-15[V], Av=20[dB], RL=2[kΩ],80[kHz]-LPF,Ta=25[℃]) -200 2.0 0.0 -50 BA4564R family 3.0 1.0 25 125 0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 SUPPLY VOLTAGE [V] ±16 Fig. 106 Slew Rate - Supply Voltage (CL=100[pF],RL=2[kΩ],Ta=25[℃]) 30 BA4564R family 25 20 15 10 5 0 1.E+01 1.E+02 1.E+03 1.E+04 1.E+05 1.E+06 FREQUENCY [Hz] Fig. 109 Maximum Output Voltage Swing - Frequency (VCC/VEE=+15[V]/-15[V],RL=2[kΩ],Ta=25[℃]) -170 50 -140 40 -110 30 GAIN -80 20 PHASE [deg] VOLTAGE GAIN [dB] 4.0 100 Fig. 104 Common Mode Rejection Ratio - Ambient Temperature 80 EQUIVALENT INPUT NOISE VOLTAGE . [nV/√Hz] 125 SLEW RATE [V/μs] 100 BA4564R family 5.0 MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] 125 -50 BA4564R family 150 POWER SUPPLY REJECTION RATIO [dB] COMMON MODE REJECTION RATIO [dB] BA4564R family 150 2 4 6 8 COMMON MODE INPUT VOLTAGE [V] -50 10 -20 0 1.E+00 1.E+02 1.E+04 1.E+06 1.E+08 FREQUENCY [Hz] Fig. 110 Voltage Gain - Frequency (VCC/VEE=+15[V]/-15[V],Av=40[dB],RL=2[kΩ],Ta=25[℃]) (*)The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 22/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Reference Data BA4580R family BA4580R family BA4580R family 10.0 BA4580R family 10.0 BA4580RF 600 400 BA4580RFVM 200 0 4.0 10 15 20 25 SUPPLY VOLTAGE [V] 30 4.0 ±2 V ±7.5 V 2.0 35 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] 100 Fig. 113 Supply Current - Ambient Temperature BA4580R family 20 BA4580R family 20 15 15 20 15 10 5 10 OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] VOH VOH 5 0 -5 VOL -10 -15 1 LOAD RESISTANCE [kΩ] 5 0 -5 -10 VOL -20 0.1 10 10 -15 -20 0 1 LOAD RESISTANCE [kΩ] 10 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 ±18 SUPPLY VOLTAGE [V] Fig. 114 Maximum Output Voltage Swing - Load Resistance Fig.115 Maximum Output Voltage - Load Resistance Fig. 116 Maximum Output Voltage - Supply Voltage (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) (RL=2[kΩ],Ta=25[℃]) BA4580R family 15 10 10 VOH 0 -5 VOL -10 -15 VOH 5 0 -5 VOL -10 -15 -20 -50 -20 -25 0 25 50 75 100 125 BA4580R family 6 INPUT OFFSET VOLTAGE [mV 15 5 BA4580R family 20 OUTPUT VOLTAGE [V] MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] ±15V 6.0 0.0 5 Fig. 112 Supply Current - Supply Voltage 25 20 OUTPUT VOLTAGE [V] 105℃ 2.0 0 BA4580R family 0.1 4 -40℃ 2 25℃ 0 105℃ -2 -4 -6 0 5 10 15 20 25 ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 AMBIENT TEMPERATURE [℃] OUTPUT CURRENT [mA] SUPPLY VOLTAGE [V] Fig. 117 Maximum Output Voltage - Ambient Temperature Fig. 118 Maximum Output Voltage - Ambient Temperature Fig.119 Input Offset Voltage - Supply Voltage (VCC/VEE=+15[V]/-15[V], RL=2[kΩ]) (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) BA4580R family INPUT BIAS CURRENT [nA] 4 ±2V 2 ±7.5V 0 ±15V -2 -4 180 160 160 140 120 -40℃ 100 80 60 105℃ 40 25℃ 20 0 25 50 75 100 125 AMBIENT TEMPERATURE [℃] Fig. 120 Input Offset Voltage - Ambient Temperature (Vicm=0[V], Vout=0[V]) (*)The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 140 ±7.5V 120 100 80 60 ±15V ±2V 40 20 0 -25 BA4580R family 200 180 -6 -50 (Vicm=0[V], Vout=0[V]) BA4580R family 200 . 6 INPUT OFFSET VOLTAGE [mV] 8.0 25℃ 6.0 Fig. 111 Derating Curve 30 -40℃ 0.0 25 50 75 100105 125 AMBIENT TEMPERATURE [℃] . 0 8.0 SUPPLY CURRENT [mA] SUPPLY CURRENT [mA] 800 INPUT BIAS CURRENT [nA] POWER DISSIPATION [mW] . . 1000 0 ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] Fig. 121 Input Bias Current - Supply Voltage (Vicm=0[V], Vout=0[V]) 23/48 -50 -25 0 25 50 75 100 125 AMBIENT TEMPERATURE [℃] Fig. 122 Input Bias Current - Ambient Temperature (Vicm=0[V], Vout=0[V]) 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note . 30 INPUT OFFSET CURRENT [nA] ●Reference Data BA4580R family 20 BA4580R family BA4580R family 30 BA4580R family 5 105℃ 10 0 25℃ -10 -40℃ -20 INPUT OFFSET VOLTAGE [mV] INPUT OFFSET CURRENT [nA] 4 20 ±2V ±7.5V 10 0 -10 ±15V -20 105℃ 3 25℃ 2 -40℃ 1 0 -1 -2 -3 -4 -30 -5 -30 ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [°C] 0 125 Fig. 123 Input Offset Current - Supply Voltage Fig. 124 Input Offset Current - Ambient Temperature (Vicm=0[V], Vout=0[V]) (Vicm=0[V], Vout=0[V]) 2 4 6 8 COMMON MODE INPUT VOLTAGE [V] Fig. 125 Input Offset Voltage - Common Mode Input Voltage 100 75 50 25 0 -25 0 25 50 75 100 AMBIENT TEMPERATURE [°C] 100 75 50 0 -25 0 25 50 75 100 (VCC/VEE=+2[V]/-2[V] to +15[V]/-15[V]) BA4580R family TOTAL HARMONIC DISTORTION [%] EQUIVALENT INPUT NOISE VOLTAGE [nV/√Hz] . BA4580R family 1 60 40 20 0.1 20kHz 0.01 1kHz 0.001 20Hz 0.0001 0 0.1 10000 Fig. 129 Equivalent Input Noise Voltage - Frequency BA4580R family 1 OUTPUT VOLTAGE [Vrms] 10 Fig. 130 Total Harmonic Distortion - Output Voltage (VCC/VEE=+15[V]/-15[V],Rs=100[Ω],Ta=25[℃]) 60 ±0 AMBIENT TEMPERATURE [℃] (VCC/VEE=+15[V]/-15[V],Vicm=-12[V] to +12[V]) 100 FREQUENCY [Hz] -5 125 Fig. 127 Power Supply Rejection Ratio - Ambient Temperature 1 0 -10 -50 125 Fig. 126 Common Mode Rejection Ratio - Ambient Temperature 80 5 25 (VCC/VEE=+15[V]/-15[V],Av=20[dB], RL=2[kΩ],80[kHz]-LPF,Ta=25[℃]) ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] Fig. 128 Slew Rate - Supply Voltage (CL=100[pF],RL=2[kΩ],Ta=25[℃]) MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] -50 125 BA4580R family 10 . 125 BA4580R family 150 SLEW RATE [V/μs] POWER SUPPLY REJECTION RATIO [dB] . COMMON MODE REJECTION RATIO [dB] (VCC=8[V], Vout=4[V]) BA4580R family 150 BA4580R family 30 25 20 15 10 5 0 1 10 100 FREQUENCY [kHz] 1000 Fig. 131 Maximum Output Voltage Swing - Frequency (VCC/VEE=+15[V]/-15[V],RL=2[kΩ],Ta=25[℃]) 0 50 -30 40 -60 30 -90 GAIN 20 -120 10 -150 PHASE [deg] VOLTAGE GAIN [dB] PHASE 0 -180 1.E-01 1.E+00 1.E+01 1.E+02 1.E+03 1.E+04 FREQUENCY [kHz] Fig. 132 Voltage Gain - Frequency (VCC/VEE=+15[V]/-15[V],Av=40[dB],RL=2[kΩ],Ta=25[℃]) (*)The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 24/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Reference Data BA4584 family BA4584 family BA4584 family 24 BA4584 family 24 20 600 400 200 20 12 8 85℃ 4 0 25 50 75 85 100 AMBIENT TEMPERATURE [℃] 0 0 8 5 10 15 20 25 SUPPLY VOLTAGE [V] 30 ±7.5 V 35 -50 20 15 10 5 15 15 10 10 VOH VOH 5 0 -5 VOL -10 5 0 -5 -10 -20 0.1 10 VOL -15 -20 1 LOAD RESISTANCE [kΩ] 1 LOAD RESISTANCE [kΩ] 10 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 ±18 SUPPLY VOLTAGE [V] (VCC/VEE=+15[V]/-15[V], Ta=25[℃]) Fig. 137 Maximum Output Voltage - Load Resistance Fig. 138 Maximum Output Voltage - Supply Voltage (VCC/VEE=+15[V]/-15[V], Ta=25[℃]) (RL=2[kΩ], Ta=25[℃]) BA4584 family BA4584 family 20 15 10 10 OUTPUT VOLTAGE [V] 15 VOH 5 0 VOL -5 -10 -15 VOH 5 0 -5 VOL -10 -15 -20 -50 100 0 5 10 15 20 -40℃ 25℃ 2 0 105℃ -2 -4 ±0 25 Fig. 140 Maximum Output Voltage - Output Current (VCC/VEE=+15[V]/-15[V], RL=2[kΩ]) ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 ±18 SUPPLY VOLTAGE [V] OUTPUT CURRENT [mA] Fig. 139 Maximum Output Voltage - Ambient Temperature Fig. 141 Input Offset Voltage - Supply Voltage (Vicm=0[V], Vout=0[V]) (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) BA4584 family BA4584 family 200 BA4584 family 200 ±2V 2 ±7.5V 0 -2 ±15V -4 180 180 160 160 140 -40℃ 120 25℃ 100 80 60 105℃ 40 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] ±7.5V ±4V 120 100 80 60 ±15V 40 0 0 -50 140 20 20 -6 INPUT BIAS CURRENT [nA] 4 INPUT BIAS CURRENT [nA] INPUT OFFSET VOLTAGE [mV] . 6 4 -6 -20 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] BA4584 family 6 INPUT OFFSET VOLTAGE [mV] Fig. 136 Maximum Output Voltage Swing - Load Resistance 20 100 BA4584 family 20 -15 0 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] Fig. 135 Supply Current - Ambient Temperature BA4584 family 20 25 0.1 ±2 V 4 Fig. 134 Supply Current - Supply Voltage OUTPUT VOLTAGE [V] MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] 12 0 125 BA4584 family 30 ±15V 16 0 Fig. 133 Derating Curve OUTPUT VOLTAGE [V] 25℃ -40℃ 16 SUPPLY CURRENT [mA] BA4584FV OUTPUT VOLTAGE [V] 800 SUPPLY CURRENT [mA] SUPPLY CURRENT [mA] . 1000 ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] Fig. 142 Input Offset Voltage - Ambient Temperature Fig. 143 Input Bias Current - Supply Voltage (Vicm=0[V], Vout=0[V]) (Vicm=0[V], Vout=0[V]) -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] Fig. 144 Input Bias Current - Ambient Temperature (Vicm=0[V], Vout=0[V]) (*)The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 25/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note . 30 INPUT OFFSET CURRENT [nA] ●Reference Data BA4584 family 20 BA4584 family BA4584 family 30 BA4584 family 5 -40℃ 10 0 25℃ -10 85℃ -20 ±2V 10 INPUT OFFSET VOLTAGE [ mV] INPUT OFFSET CURRENT [nA] 4 20 ±7.5V 0 -10 ±15V -20 85℃ 3 -40℃ 2 25℃ 1 0 -1 -2 -3 -4 -30 ±2 ±4 -5 -50 ±6 ±8 ±10 ±12 ±14 ±16 ±18 SUPPLY VOLTAGE [V] -25 0 25 50 75 AMBIENT TEMPERATURE [°C] 100 Fig. 145 Input Offset Current - Supply Voltage Fig. 146 Input Offset Current - Ambient Temperature (Vicm=0[V], Vout=0[V]) (Vicm=0[V], Vout=0[V]) 150 150 100 75 50 25 0 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [°C] 100 5 100 75 50 0 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] 100 (VCC/VEE=+2[V]/-2[V] to +15[V]/-15[V]) BA4584 family TOTAL HARMONIC DISTORTION [%] EQUIVALENT INPUT NOISE VOLTAGE [nV/√Hz] . BA4584 family 1 20 0.1 20kHz 0.01 0.001 1kHz 20Hz 0.0001 0 1 100 FREQUENCY [Hz] 0.1 10000 Fig. 151 Equivalent Input Noise Voltage - Frequency (VCC/VEE=+15[V]/-15[V],Rs=100[Ω],Ta=25[℃]) BA4584 family 60 0 -5 25 (VCC/VEE=+15[V]/-15[V], Vicm=-12[V] to +12[V]) 40 BA4584 family . 125 Fig. 149 Power Supply Rejection Ratio - Ambient Temperature 60 (VCC=8[V], Vout=4[V]) 10 Fig. 148 Common Mode Rejection Ratio - Ambient Temperature 80 5 10 15 20 25 30 COMMO N MO DE INPUT VOLTAGE [V] Fig. 147 Input Offset Voltage - Common Mode Input Voltage SLEW RATE [V/μs] 125 0 BA4584 family . BA4584 family POWER SUPPLY REJECTION RATIO [dB] COMMON MODE REJECTION RATIO [dB] ±0 1 OUTPUT VOLTAGE [Vrms] 10 Fig. 152 Total Harmonic Distortion - Output Voltage (VCC/VEE=+15[V]/-15[V],Av=20[dB], RL=2[kΩ],80[kHz]-LPF,Ta=25[℃]) -10 ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] Fig. 150 Slew Rate - Supply Voltage (CL=100[pF],RL=2[kΩ],Ta=25[℃]) MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] -30 BA4584 family 30 25 20 15 10 5 0 1 10 100 FREQUENCY [kHz] 1000 Fig. 153 Maximum Output Voltage Swing - Frequency (VCC/VEE=+15[V]/-15[V],RL=2[kΩ],Ta=25[℃]) 0 50 -30 40 -60 30 -90 GAIN 20 -120 10 -150 PHASE [deg] VOLTAGE GAIN [dB] PHASE 0 -180 1.E-01 1.E+00 1.E+01 1.E+02 1.E+03 1.E+04 FREQUENCY [kHz] Fig. 154 Voltage Gain - Frequency (VCC/VEE=+15[V]/-15[V],Av=40[dB],RL=2[kΩ],Ta=25[℃]) (*)The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 26/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Reference Data BA4584R family BA4584R family BA4584R family 20 BA4584R family 24 . 1000 SUPPLY CURRENT [mA] 400 200 0 12 8 105℃ 4 5 10 15 SUPPLY VOLTAGE [V] 8 ±2 V 15 10 5 ±4.5 V 4 -50 20 VOH 0 VOL -5 125 BA4584R family 10 VOH 5 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] Fig. 157 Supply Current - Ambient Temperature BA4584R family 10 OUTPUT VOLTAGE [V] MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] 12 Fig. 156 Supply Current - Supply Voltage BA4584R family ±9.5V 0 0 Fig. 155 Derating Curve 5 0 -5 VOL -10 0 0.1 1 LOAD RESISTANCE [kΩ] -10 0.1 10 1 LOAD RESISTANCE [kΩ] 10 ±2 ±4 ±6 ±8 SUPPLY VOLTAGE [V] ±10 Fig. 158 Maximum Output Voltage Swing - Load Resistance Fig. 159 Maximum Output Voltage - Load Resistance Fig. 160 Maximum Output Voltage - Supply Voltage (VCC/VEE=+9.5[V]/-9.5[V], Ta=25[℃]) (VCC/VEE=+9.5[V]/-9.5[V], Ta=25[℃]) (RL=2[kΩ], Ta=25[℃]) BA4584R family 15 BA4584R family 15 10 OUTPUT VOLTAGE [V] 10 OUTPUT VOLTAGE [V] 16 0 105 25 50 75 100 125 AMBIENT TEMPERATURE [℃] 20 25℃ OUTPUT VOLTAGE [V] 0 -40℃ 5 VOH 0 VOL -5 -10 5 VOH 0 VOL -5 -10 -15 -50 -15 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] 125 4 -40℃ 2 0 105℃ -2 -4 5 10 15 20 ±0 25 ±2 Fig. 162 Maximum Output Voltage - Output Current (VCC/VEE=+9.5[V]/-9.5[V], RL=2[kΩ]) (VCC/VEE=+9.5[V]/-9.5[V],Ta=25[℃]) ±6 ±8 ±10 Fig. 163 Input Offset Voltage - Supply Voltage (Vicm=0[V], Vout=0[V]) BA4584R family BA4584R family 200 ±2V 2 ±4.5V 0 -2 ±9.5V -4 180 180 160 160 140 -40℃ 120 INPUT BIAS CURRENT [nA] 4 INPUT BIAS CURRENT [nA] INPUT OFFSET VOLTAGE [mV] . 200 ±4 SUPPLY VOLTAGE [V] OUTPUT CURRENT [mA] BA4584R family 25℃ -6 0 Fig. 161 Maximum Output Voltage - Ambient Temperature 6 BA4584R family 6 INPUT OFFSET VOLTAGE [mV] SUPPLY CURRENT [mA] 600 20 16 SUPPLY CURRENT [mA] BA4584RFV 800 25℃ 100 80 60 105℃ 40 20 -50 -25 0 25 50 75 100 125 AMBIENT TEMPERATURE [℃] Fig. 164 Input Offset Voltage - Ambient Temperature (Vicm=0[V], Vout=0[V]) ±2V ±4.5V 120 100 80 60 ±9.5V 40 20 0 -6 140 0 ±0 ±2 ±4 ±6 ±8 ±10 SUPPLY VOLTAGE [V] -50 -25 0 25 50 75 100 125 AMBIENT TEMPERATURE [ ℃] Fig. 165 Input Bias Current - Supply Voltage Fig. 166 Input Bias Current - Ambient Temperature (Vicm=0[V], Vout=0[V]) (Vicm=0[V], Vout=0[V]) (*)The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 27/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note . 30 INPUT OFFSET CURRENT [nA] ●Reference Data BA4584R family 20 BA4584R family BA4584R family 30 BA4584R family 5 105℃ 10 0 25℃ -10 -40℃ -20 ±2V ±4.5V 10 0 -10 ±9.5V -20 105℃ 3 25℃ 2 -40℃ 1 0 -1 -2 -3 -4 -30 -30 ±2 ±4 ±6 ±8 SUPPLY VOLTAGE [V] -5 -50 ±10 Fig. 167 -25 0 25 50 75 100 AMBIENT TEMPERATURE [°C] 125 Fig. 168 Input Offset Current - Supply Voltage Input Offset Current - Ambient Temperature (Vicm=0[V], Vout=0[V]) (Vicm=0[V], Vout=0[V]) (VCC=8[V], Vout=4[V]) 75 50 25 0 125 . 125 100 75 50 -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] (VCC/VEE=+2[V]/-2[V] to +9.5[V]/-9.5[V]) BA4584R family EQUIVALENT INPUT NOISE VOLTAGE [nV/√Hz] . TOTAL HARMONIC DISTORTION [%] 100 FREQUENCY [Hz] 0.1 20kHz 0.01 0.001 10000 Fig. 173 1kHz 20Hz 0.0001 0.1 0 1 BA4584R family 1 20 1 OUTPUT VOLTAGE [Vrms] 10 Fig. 174 Total Harmonic Distortion - Output Voltage Equivalent Input Noise Voltage - Frequency -5 (VCC/VEE=+9.5[V]/-9.5[V], Av=20[dB], RL=2[kΩ],80[kHz]-LPF,Ta=25[℃]) (VCC/VEE=+9.5[V]/-9.5[V],Rs=100[Ω],Ta=25[℃]) ±0 125 (VCC/VEE=+9.5[V]/-9.5[V], Vicm=-12[V] to +12[V]) 40 0 -10 0 Fig. 171 Power Supply Rejection Ratio - Ambient Temperature 60 5 25 Fig. 170 Common Mode Rejection Ratio - Ambient Temperature 80 BA4584R family 10 SLEW RATE [V/μs] POWER SUPPLY REJECTION RATIO [dB] 100 -25 0 25 50 75 100 AMBIENT TEMPERATURE [°C] Fig. 169 Input Offset Voltage - Common Mode Input Voltage BA4584R family 150 125 -50 2 4 6 8 COMMON MODE INPUT VOLTAGE [V] . BA4584R family 150 0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] Fig. 172 Slew Rate - Supply Voltage (CL=100[pF],RL=2[kΩ],Ta=25[℃]) MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] ±0 COMMON MODE REJECTION RATIO [dB] INPUT OFFSET VOLTAGE [mV] INPUT OFFSET CURRENT [nA] 4 20 BA4584R family 20 15 10 5 0 1 10 100 FREQUENCY [kHz] 1000 Fig. 175 Maximum Output Voltage Swing - Frequency (VCC/VEE=+9.5[V]/-9.5[V],RL=2[kΩ],Ta=25[℃]) BA4584R family 0 VOLTAGE GAIN [dB] 50 PHASE 40 30 -30 -60 GAIN -90 20 -120 10 -150 PHASE [deg] 60 0 -180 1.E-01 1.E+00 1.E+01 1.E+02 1.E+03 1.E+04 FREQUENCY [kHz] Fig. 176 Voltage Gain - Frequency (VCC/VEE=+9.5[V]/-9.5[V],Av=40[dB],RL=2[kΩ],Ta=25[℃]) (*)The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 28/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Reference Data BA8522R family BA8522R family 10 . BA8522RF BA8522RFV 600 400 8 SUPPLY CURRENT [mA] BA8522RFVM 200 8 25℃ 6 4 105℃ 2 0 4 0 5 10 15 20 25 SUPPLY VOLTAGE [V] 30 35 -50 Fig. 178 Supply Current - Supply Voltage BA8522R family 30 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] BA8522R family 10 15 15 10 5 VOH 10 VOH 5 0 -5 5 OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] 20 VOL -10 0 -5 VOL -15 -10 -20 0 0.1 1 LOAD RESISTANCE [kΩ] 0.1 10 1 LOAD RESISTANCE [kΩ] ±0 10 ±2 ±4 ±6 ±8 SUPPLY VOLTAGE [V] Fig. 180 Maximum Output Voltage Swing - Load Resistance Fig. 181 Maximum Output Voltage - Load Resistance Fig. 182 Maximum Output Voltage - Supply Voltage (VCC/VEE=+15[V]/-15[V], Ta=25[℃]) (VCC/VEE=+15[V]/-15[V], Ta=25[℃]) (RL=2[kΩ], Ta=25[℃]) BA8522R family 20 10 10 OUTPUT VOLTAGE [V] 15 VOH 0 -5 VOL -10 BA8522R family 20 15 5 VOH 5 0 -5 VOL -10 -20 -50 -20 -25 0 25 50 75 100 4 -40℃ 25℃ 2 0 105℃ -2 -4 -6 0 125 ±10 BA8522R family 6 -15 -15 125 Fig. 179 Supply Current - Ambient Temperature BA8522R family 20 25 ±7.5 V ±2 V 2 0 105 25 50 75 100 125 AMBIENT TEMPERATURE [℃] Fig. 177 Derating Curve MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] 6 0 0 OUTPUT VOLTAGE [V] ±15V INPUT OFFSET VOLTAGE [mV] SUPPLY CURRENT [mA] 800 BA8522R family 10 -40℃ SUPPLY CURRENT [mA] BA8522R family 1000 5 10 15 20 25 ±0 ±5 ±10 ±15 ±20 AMBIENT TEMPERATURE [℃] OUTPUT CURRENT [mA] SUPPLY VOLTAGE [V] Fig. 183 Maximum Output Voltage - Ambient Temperature Fig. 184 Maximum Output Voltage - Output Current Fig. 185 Input Offset Voltage - Supply Voltage (VCC/VEE=+15[V]/-15[V], RL=2[kΩ]) (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) BA8522R family BA8522R family 100 BA8522R family 100 ±2V 2 ±7.5V 0 ±15V -2 -4 25℃ -40℃ 80 60 105℃ 40 20 -50 -25 0 25 50 75 100 125 AMBIENT TEMPERATURE [℃] ±2V 80 ±7.5V 60 ±15V 40 20 0 0 -6 INPUT BIAS CURRENT [nA] 4 INPUT BIAS CURRENT [nA] INPUT OFFSET VOLTAGE [mV] . 6 (Vicm=0[V], Vout=0[V]) ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] -50 -25 0 25 50 75 100 125 AMBIENT TEMPERATURE [℃] Fig. 186 Input Offset Voltage - Ambient Temperature Fig. 187 Input Bias Current - Supply Voltage Fig. 188 Input Bias Current - Ambient Temperature (Vicm=0[V], Vout=0[V]) (Vicm=0[V], Vout=0[V]) (Vicm=0[V], Vout=0[V]) (*)The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 29/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note . 30 INPUT OFFSET CURRENT [nA] ●Reference Data BA8522R family 20 BA8522R family BA8522R family 30 BA8522R family 5 105℃ 10 0 25℃ -40℃ -10 -20 INPUT OFFSET VOLTAGE [mV] INPUT OFFSET CURRENT [nA] 4 20 ±2V ±7.5V 10 0 ±15V -10 -20 3 2 25℃ -40℃ 1 0 -1 105℃ -2 -3 -4 -30 -30 ±0 ±2 -5 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] -50 -25 0 25 50 75 100 125 -15 AMBIENT TEMPERATURE [°C] Fig. 189 Input Offset Current - Supply Voltage Fig. 190 Input Offset Current - Ambient Temperature (Vicm=0[V], Vout=0[V]) (Vicm=0[V], Vout=0[V]) -10 -5 0 5 10 15 COMMON MODE INPUT VOLTAGE [V] Fig. 191 Input Offset Voltage - Common Mode Input Voltage . 50 25 0 -25 0 25 50 75 100 AMBIENT TEMPERATURE [°C] 125 . 75 125 100 SLEW RATE [V/μs] 100 4 75 50 0 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] 125 Fig. 193 Power Supply Rejection Ratio - Ambient Temperature (VCC/VEE=+15[V]/-15[V],Vicm=-12[V] to +12[V]) (VCC/VEE=+2[V]/-2[V] to +15[V]/-15[V]) TOTAL HARMONIC DISTORTION [%] EQUIVALENT INPUT NO ISE VOLTAGE [ nV/√Hz] . 40 20 100 FREQUENCY [Hz] 20kHz 1kHz 0.01 20Hz 0.0001 0.1 0 1 0.1 0.001 10000 1 OUTPUT VOLTAGE [Vrms] ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] Fig. 194 Slew Rate - Supply Voltage BA8522R family 1 60 2 0 -50 BA8522R family 3 1 25 Fig. 192 Common Mode Rejection Ratio - Ambient Temperature 80 BA8522R family 5 10 (CL=100[pF],RL=2[kΩ],Ta=25[℃]) MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] 125 -50 BA8522R family 150 POWER SUPPLY REJECTION RATIO [dB] COMMON MODE REJECTION RATIO [dB] (VCC=8[V], Vout=4[V]) BA8522R family 150 BA8522R family 30 25 20 15 10 5 0 1 10 100 FREQUENCY [kHz] 1000 Fig. 195 Equivalent Input Noise Voltage - Frequency Fig. 196 Total Harmonic Distortion - Output Voltage Fig. 197 Maximum Output Voltage Swing - Frequency (VCC/VEE=+15[V]/-15[V],Rs=100[Ω],Ta=25[℃]) (VCC/VEE=+15[V]/-15[V],Av=20[dB], RL=2[kΩ],80[kHz]-LPF,Ta=25[℃]) (VCC/VEE=+15[V]/-15[V],RL=2[kΩ],Ta=25[℃]) BA8522R family 60 50 180 150 40 120 30 90 GAIN 20 60 10 30 0 1.E-01 PHASE [ deg] VOLTAGE GAIN [dB] PHASE 0 1.E+00 1.E+01 1. E+02 1.E+03 1.E+04 FREQUENCY [kHz] Fig. 198 Voltage Gain - Frequency (VCC/VEE=+15[V]/-15[V],Av=40[dB],RL=2[kΩ],Ta=25[℃]) (*)The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 30/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Reference Data BA15218 family BA15218 family BA15218 family 10. 0 BA15218 family 10.0 SUPPLY CURRENT [mA] 800 BA15218F 600 400 200 8.0 8. 0 SUPPLY CURRENT [mA] POWER DISSIPATION [mW] . . 1000 25℃ 6. 0 -40℃ 4. 0 2. 0 ±15V 6.0 ±7.5 V 4.0 2.0 85℃ 0 0 85 100 25 50 75 AMBIENT TEMPERATURE [℃] Fig. 199 125 0 . BA15218 family 30 -50 35 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] 100 Fig. 201 Supply Current - Ambient Temperature BA15218 family 20 BA15218 family 20 15 15 25 15 10 5 10 OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] VOH 20 VOH 5 0 -5 VOL -10 -15 0.1 1 LOAD RESISTANCE [kΩ] Fig. 202 Maximum Output Voltage Swing - Load Resistance (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) BA15218 family 20 10 10 OUTPUT VOLTAGE [V] 15 VOH 0 -5 VOL -10 1 LOAD RESISTANCE [kΩ] -15 VOL ±0 ±4 ±6 ±8 ±10 ±12 ±14 ±16 ±18 SUPPLY VOLTAGE [V] (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) (RL=2[kΩ],Ta=25[℃]) BA15218 family 0 -5 BA15218 family 6 VOH 5 VOL -10 100 ±2 Fig. 204 Maximum Output Voltage - Supply Voltage -20 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] -5 -10 10 -15 -20 -50 0 Fig. 203 Maximum Output Voltage - Load Resistance 20 15 5 5 -20 0.1 10 10 -15 -20 0 OUTPUT VOLTAGE [V] 10 15 20 25 SUPPLY VOLTAGE [V] INPUT OFFSET VOLTAGE [mV] MAXIMUM OUTPUT VOLTAGE SWING[Vp-p] 5 Fig. 200 Supply Current - Supply Voltage Derating Curve 30 ±2 V 0.0 0. 0 4 -40℃ 2 0 25℃ -2 85℃ -4 -6 0 5 10 15 20 25 ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 ±18 OUTPUT CURRENT [mA] SUPPLY VOLTAGE [V] Fig. 205 Maximum Output Voltage - Ambient Temperature Fig. 206 Maximum Output Voltage - Output Current Fig. 207 Input Offset Voltage - Supply Voltage (VCC/VEE=+15[V]/-15[V], RL=2[kΩ]) (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) BA15218 family BA15218 family 60 BA15218 family 60 ±2V 2 ±7.5V 0 ±15V -2 -4 50 50 40 -40℃ 25℃ 30 20 85℃ 10 -50 -25 0 25 50 75 100 ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] AMBIENT TEMPERATURE [℃] Fig. 208 Input Offset Voltage - Ambient Temperature 40 ±15V ±7.5V 30 20 ±2V 10 0 0 -6 INPUT BIAS CURRENT [nA] 4 INPUT BIAS CURRENT [nA] INPUT OFFSET VOLTAGE [mV . 6 (Vicm=0[V], Vout=0[V]) -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] Fig. 209 Input Bias Current - Supply Voltage Fig. 210 Input Bias Current - Ambient Temperature (Vicm=0[V], Vout=0[V]) (Vicm=0[V], Vout=0[V]) (Vicm=0[V], Vout=0[V]) (*)The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 31/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM . 30 INPUT OFFSET CURRENT [nA] ●Reference Data BA15218 family 20 BA15218 family BA15218 family 30 Technical Note BA15218 family 5 -40℃ 0 -10 85℃ -20 INPUT OFFSET VOLTAGE [mV] 25℃ 10 INPUT OFFSET CURRENT [nA] 4 20 10 ±2V ±7.5V 0 ±15V -10 -20 85℃ 3 25℃ 2 -40℃ 1 0 -1 -2 -3 -4 -30 -30 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] -5 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [°C] 100 Fig. 211 Input Offset Current - Supply Voltage Fig. 212 Input Offset Current - Ambient Temperature (Vicm=0[V], Vout=0[V]) (Vicm=0[V], Vout=0[V]) BA15218 family 150 125 BA15218 family 4 3 SLEW RATE [V/μs] 75 50 50 2 1 25 0 -50 -25 0 25 50 75 AMBIENT TEMPERATURE [°C] 0 -50 100 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] Fig. 214 Common Mode Rejection Ratio - Ambient Temperature Fig. 215 Power Supply Rejection Ratio - Ambient Temperature (VCC/VEE=+15[V]/-15[V], Vicm=-12[V] to +12[V]) (VCC/VEE=+2[V]/-2[V] to +15[V]/-15[V]) BA15218 family 60 40 20 0 1 100 FREQUENCY [Hz] 10000 Fig. 217 Equivalent Input Noise Voltage - Frequency 60 20kHz 0.01 1kHz 0.001 20Hz 0.0001 0.1 1 OUTPUT VOLTAGE [Vrms] 10 Fig. 218 Total Harmonic Distortion - Output Voltage (VCC/VEE=+15[V]/-15[V], Rs=100[Ω], Ta=25[℃]) BA15218 family 0.1 (VCC/VEE=+15[V]/-15[V],Av=20[dB], RL=2[kΩ], 80[kHz]-LPF, Ta=25[℃]) 0 ±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] Fig. 216 Slew Rate - Supply Voltage BA15218 family 1 TOTAL HARMONIC DISTORTION [%] 80 0 100 (CL=100[pF], RL=2[kΩ], Ta=25[℃]) MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] 25 EQUIVALENT INPUT NOISE VOLTAGE [nV/√Hz] . Fig. 213 Input Offset Voltage - Common Mode Input Voltage (VCC=8[V], Vout=4[V]) 100 75 BA15218 family 30 25 20 15 10 5 0 1 10 100 FREQUENCY [Hz] 1000 Fig. 219 Maximum Output Voltage Swing - Frequency (VCC/VEE=+15[V]/-15[V], RL=2[kΩ], Ta=25[℃]) PHASE 50 -30 40 -60 30 -90 GAIN 20 -120 10 -150 0 1.E+00 1.E+02 1.E+04 1.E+06 PHASE [degree] PHASE [deg] . .. 2 4 6 8 COMMON MODE INPUT VOLTAGE [V] 125 100 VOLTAGE GAIN [dB] 0 BA15218 family 150 POWER SUPPLY REJECTION RATIO [dB] . COMMON MODE REJECTION RATIO [dB] ±0 -180 1.E+08 FREQUENCY [Hz] Fig. 220 Voltage Gain - Frequency (VCC/VEE=+15[V]/-15[V], Av=40[dB], RL=2[kΩ], Ta=25[℃]) (*)The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 32/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ●Reference Data BA14741 family BA14741 family BA14741 family 8.0 BA14741 family 8.0 SUPPLY CURRENT [mA] 800 BA14741F 600 400 200 6.0 25℃ -40℃ 4.0 2.0 ±18V 6.0 SUPPLY CURRENT [mA] POWER DISSIPATION [mW] . . 1000 Technical Note ±15 V 4.0 2.0 ±2 V 85℃ 0 0 85 25 50 75 100 AMBIENT TEMPERATURE [℃] . 0.0 0.0 125 0 BA14741 family 30 35 -50 40 100 BA14741 family 20 15 15 10 10 20 15 10 5 OUTPUT VOLTAGE [V] VOH VOH 5 0 -5 VOL -10 5 0 -5 -10 0 -20 -20 1 LOAD RESISTANCE [kΩ] 10 0.1 1 LOAD RESISTANCE [kΩ] Fig. 225 Maximum Output Voltage - Load Resistance (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) 10 VOH 5 0 -5 VOL -10 -15 VOH 5 0 -5 VOL -10 -15 -20 -50 0 25 50 75 BA14741 family 4 -40℃ 2 0 25℃ -2 85℃ -4 -6 100 0 AMBIENT TEMPERATURE [℃] 5 10 15 20 ±0 ±4 Fig. 228 Maximum Output Voltage - Output Current (VCC/VEE=+15[V]/-15[V], RL=2[kΩ]) (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) BA14741 family ±12 ±16 ±20 Fig. 229 Input Offset Voltage - Supply Voltage (Vicm=0[V], Vout=0[V]) BA14741 family BA14741 family 200 . 200 ±8 SUPPLY VOLTAGE [V] OUTPUT CURRENT [mA] Fig. 227 Maximum Output Voltage - Ambient Temperature 6 ±6 ±8 ±10 ±12 ±14 ±16 ±18 SUPPLY VOLTAGE [V] 6 -20 -25 ±4 (RL=2[kΩ],Ta=25[℃]) INPUT OFFSET VOLTAGE [mV] 10 OUTPUT VOLTAGE [V] 15 ±2 Fig. 226 Maximum Output Voltage - Supply Voltage BA14741 family 20 15 ±0 10 Fig. 224 Maximum Output Voltage Swing - Load Resistance BA14741 family VOL -15 -15 20 180 ±2V 2 INPUT BIAS CURRENT [nA] 4 ±15V 0 ±18V -2 -4 INPUT BIAS CURRENT [nA] 180 INPUT OFFSET VOLTAGE [mV] -25 0 25 50 75 AMBIENT TEMPERATURE [℃] Fig. 223 Supply Current - Ambient Temperature BA14741 family 20 25 0.1 OUTPUT VOLTAGE [V] 10 15 20 25 30 SUPPLY VOLTAGE [V] Fig. 222 Supply Current - Supply Voltage OUTPUT VOLTAGE [V] MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] Fig. 221 Derating Curve 5 160 -40℃ 140 25℃ 120 100 85℃ 80 60 40 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] Fig. 230 Input Offset Voltage - Ambient Temperature (Vicm=0[V], Vout=0[V]) ±15V 120 100 80 ±18V 60 40 0 0 -50 ±2V 140 20 20 -6 160 ±0 ±4 ±8 ±12 ±16 ±20 -50 -25 0 25 50 75 100 SUPPLY VOLTAGE [V] AMBIENT TEMPERATURE [℃] Fig. 231 Input Bias Current - Supply Voltage Fig. 232 Input Bias Current - Ambient Temperature (Vicm=0[V], Vout=0[V]) (Vicm=0[V], Vout=0[V]) (*)The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 33/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM . 30 INPUT OFFSET CURRENT [nA] ●Reference Data BA14741 family BA14741 family 20 BA14741 family 30 Technical Note BA14741 family 5 -40℃ 25℃ 0 -10 85℃ -20 10 ±15V ±18V 0 -10 ±2V -20 ±8 ±12 ±16 SUPPLY VOLTAGE [V] -2 -3 -5 -50 100 75 50 25 0 -25 0 25 50 75 AMBIENT TEMPERATURE [°C] (VCC=8[V], Vout=4[V]) . 125 2.5 100 75 50 0.0 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] 100 (VCC/VEE=+15[V]/-15[V], Vicm=-12[V] to +12[V]) (VCC/VEE=+2[V]/-2[V] to +15[V]/-15[V]) BA14741 family TOTAL HARMONIC DISTORTION [%] 1 10 100 1000 20kHz 1kHz 0.01 0.0001 0.1 10000 20Hz FREQUENCY [Hz] 1 OUTPUT VOLTAGE [Vrms] ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 SUPPLY VOLTAGE [V] (CL=100[pF], RL=2[kΩ], Ta=25[℃]) 0.1 0.001 ±0 Fig. 238 Slew Rate - Supply Voltage BA14741 family 1 0 1.0 0 Fig. 237 Power Supply Rejection Ratio - Ambient Temperature 20 1.5 0.5 -50 40 2.0 25 100 60 BA14741 family 3.0 Fig. 236 Common Mode Rejection Ratio - Ambient Temperature 80 2 4 6 8 COMMON MODE INPUT VOLTAGE [V] Fig. 235 Input Offset Voltage - Common Mode Input Voltage BA14741 family 150 POWER SUPPLY REJECTION RATIO [dB] 125 -50 0 100 (Vicm=0[V], Vout=0[V]) BA14741 family 150 -25 0 25 50 75 AMBIENT TEMPERATURE [°C] Fig. 234 Input Offset Current - Ambient Temperature (Vicm=0[V], Vout=0[V]) EQUIVALENT INPUT NOISE VOLTAGE [nV/√Hz] . 0 -1 -4 ±20 Fig. 233 Input Offset Current - Supply Voltage -40℃ 1 SLEW RATE [V/μs] ±4 25℃ 2 10 MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] ±0 85℃ 3 -30 -30 COMMON MODE REJECTION RATIO [dB] INPUT OFFSET VOLTAGE [mV] 10 INPUT OFFSET CURRENT [nA] 4 20 BA14741 family 30 25 20 15 10 5 0 1 10 100 FREQUENCY [kHz] 1000 Fig. 239 Equivalent Input Noise Voltage - Frequency Fig.240 Total Harmonic Distortion - Output Voltage Fig. 241 Maximum Output Voltage Swing - Frequency (VCC/VEE=+15[V]/-15[V], Rs=100[Ω],Ta=25[℃]) (VCC/VEE=+15[V]/-15[V], Av=20[dB], RL=2[kΩ],80[kHz]-LPF,Ta=25[℃]) (VCC/VEE=+15[V]/-15[V], RL=2[kΩ],Ta=25[℃]) BA14741 family 60 0 50 -30 40 -60 30 -90 GAIN 20 -120 10 -150 0 1.E+00 1.E+02 1.E+04 1.E+06 PHASE [deg] VOLTAGE GAIN [dB] PHASE -180 1.E+08 FREQUENCY [Hz] Fig. 242 Voltage Gain - Frequency (VCC/VEE=+15[V]/-15[V], Av=40[dB],RL=2[kΩ],Ta=25[℃]) (*)The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 34/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Reference Data BA15532 family BA15532 family BA15532 family 20. 0 BA15532 family 20.0 BA15532F 600 400 200 16.0 16. 0 -20℃ 8. 0 75℃ 4. 0 25 50 75 100 AMBIENT TEMPERATURE [℃] . 125 0 Fig. 243 Derating Curve 5 10 15 20 25 30 SUPPLY VO LTAGE [V] 35 15 10 5 1 LOAD RESISTANCE [kΩ] 15 15 10 10 VOH 5 0 -5 VOL -10 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] VOH 5 0 -5 -10 VOL -20 1 LOAD RESISTANCE [kΩ] 10 ±0 ±4 ±8 ±12 ±16 ±20 SUPPLY VOLTAGE [V] Fig. 246 Maximum Output Voltage Swing - Load Resistance Fig. 247 Maximum Output Voltage - Load Resistance Fig. 248 Maximum Output Voltage - Supply Voltage (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) (RL=600[Ω],Ta=25[℃]) BA15532 family 20 10 10 OUTPUT VOLTAGE [V] 15 VOH 5 0 -5 BA15532 family 20 15 VOL -10 VOH 5 0 -5 VOL -10 -20 -50 -20 -25 0 25 50 75 5 2 -20℃ 0 -2 25℃ Fig. 249 Maximum Output Voltage - Ambient Temperature 75℃ -4 10 15 20 25 ±0 ±4 OUTPUT CURRENT [mA] AMBIENT TEMPERATURE [℃] ±8 ±12 ±16 ±20 ±24 SUPPLY VOLTAGE [V] Fig. 250 Maximum Output Voltage - Output Current Fig. 251 Input Offset Voltage - Supply Voltage (Vicm=0[V], Vout=0[V]) (VCC/VEE=+15[V]/-15[V],Ta=25[℃]) (VCC/VEE=+15[V]/-15[V], RL=2[kΩ]) BA15532 family BA15532 family 800 BA15532 family 800 700 2 ±15V ±3V 0 -2 ±20V -4 -20℃ 600 25℃ 500 400 300 75℃ 200 100 -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] Fig. 252 Input Offset Voltage - Ambient Temperature (Vicm=0[V], Vout=0[V]) 600 ±20V 500 ±15V 400 300 ±3V 200 100 0 -6 (*) 700 INPUT BIAS CURRENT [nA] 4 INPUT BIAS CURRENT [nA] INPUT OFFSET VOLTAGE [mV . 6 4 -6 0 100 ±24 BA15532 family 6 -15 -15 100 BA15532 family -15 -20 0.1 10 ±2 V 20 -15 0 0.1 4.0 Fig. 245 Supply Current - Ambient Temperature OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] 20 ±15 V -50 BA15532 family 20 25 8.0 40 Fig. 244 Supply Current - Supply Voltage BA15532 family 30 ±20V 12.0 0.0 0. 0 0 MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] 25℃ 12. 0 0 OUTPUT VOLTAGE [V] SUPPLY CURRENT [mA] SUPPLY CURRENT [ mA] 800 INPUT OFFSET VOLTAGE [mV POWER DISSIPATION [mW] . . 1000 0 ±0 ±4 ±8 ±12 ±16 ±20 ±24 SUPPLY VOLTAGE [V] -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [℃] Fig. 253 Input Bias Current - Supply Voltage Fig. 254 Input Bias Current - Ambient Temperature (Vicm=0[V], Vout=0[V]) (Vicm=0[V], Vout=0[V]) The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 35/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note -20℃ 25℃ 10 0 75℃ -10 -20 -30 20 ±3V 10 0 ±15V ±20V -10 -20 ±4 ±8 ±12 ±16 ±20 SUPPLY VOLTAGE [V] ±24 -25 0 25 50 75 3 (Vicm=0[V], Vout=0[V]) -1 -2 -3 -4 125 100 75 50 -25 0 25 50 75 AMBIENT TEMPERATURE [°C] (VCC=8[V], Vout=4[V]) BA15532 family 150 100 75 50 10 8 6 4 2 25 0 -50 100 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] 100 ±2 Fig. 259 Power Supply Rejection Ratio 60 40 20 0.1 0.01 0.001 20Hz 0.0001 0.1 10000 Fig. 261 Equivalent Input Noise Voltage - Frequency 20kHz 1kHz 1 OUTPUT VOLTAGE [Vrms] 10 Fig. 262 Equivalent Input Noise Voltage - Frequency (VCC/VEE=+15[V]/-15[V],Av=20[dB], RL=600[Ω],80[kHz]-LPF,Ta=25[℃]) (VCC/VEE=+15[V]/-15[V],Rs=100[Ω],Ta=25[℃]) 0 MAXIMUM OUTPUT VOLTAGE SWING [Vp-p] TOTAL HARMONIC DISTORTION [%] EQUIVALENT INPUT NOISE VOLTAGE [nV/√Hz] . BA15532 family 1 0 ±22 BA15532 family 30 25 20 15 10 5 0 1 10 100 FREQUENCY [Hz] 1000 Fig. 263 Maximum Output Voltage Swing - Frequency (VCC/VEE=+15[V]/-15[V],RL=600[Ω],Ta=25[℃]) PHASE 50 -30 40 -60 30 -90 GAIN 20 -120 10 -150 0 1.E+00 1.E+02 1.E+04 1.E+06 PHASE [deg] . .. ±10 ±14 ±18 SUPPLY VOLTAGE [V] (CL=100[pF],RL=2[kΩ],Ta=25[℃]) BA15532 family BA15532 family ±6 Fig. 260 Slew Rate - Supply Voltage (VCC/VEE=+15[V]/-15[V], Vicm=-12[V] to +12[V]) VOLTAGE GAIN [dB] BA15532 family 12 125 Fig. 258 Common Mode Rejection Ratio - Ambient Temperature 60 2 4 6 8 COMMON MODE INPUT VOLTAGE [V] Fig. 257 Input Offset Voltage - Common Mode Input Voltage . POWER SUPPLY REJECTION RATIO [dB] . 150 100 1000 FREQUENCY [Hz] -20℃ 0 0 SLEW RATE [V/μs] BA15532 family 10 25℃ 1 AMBIENT TEMPERATURE [°C] (Vicm=0[V], Vout=0[V]) 80 75℃ 2 100 Fig. 256 Input Offset Current - Ambient Temperature -50 4 -5 -50 Fig. 255 Input Offset Current - Supply Voltage 175 BA15532 family 5 -30 ±0 COMMON MODE REJECTION RATIO [dB] BA15532 family 30 INPUT OFFSET VOLTAGE [mV 20 BA15532 family INPUT OFFSET CURRENT [nA] . 30 INPUT OFFSET CURRENT [nA] ●Reference Data BA15532 family -180 1.E+08 FREQUENCY [Hz] Fig. 264 Voltage Gain - Frequency (VCC/VEE=+15[V]/-15[V],Av=40[dB],RL=2[kΩ],Ta=25[℃]) (*)The above data is ability value of sample, it is not guaranteed www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 36/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Reference Data BA4510 family BA4510 family BA4510F 400 BA4510FV 200 25℃ 6 75℃ 4 2 5V 6 4 3V 2 0 0 25 50 75 100 AMBIENT TEMPERATURE [℃] 125 0 Fig. 265 Derating Curve 2 4 6 SUPPLY VOLTAGE [V] -50 8 0 -1 VOL OUTPUT VOLTAGE [V] 1 VOH 1 0 -1 VOL -2 -2 1 10 100 1000 LOAD RESISTANCE [kΩ] ±1.0 10000 Fig. 268 Maximum Output Voltage Swing - Load Resistance (VCC/VEE=2.5[V]/-2.5[V], Ta=25[℃]) BA4510 family 3.0 ±1.5 ±2.0 ±2.5 ±3.0 ±3.5 SUPPLY VOLTAGE [V] 1.5 1.0 0.5 0.4 0.8 1.2 1.6 OUTPUT SOURCE CURRENT [mA] -1.0 -1.5 VOL -2.0 2 2 4 6 8 OUTPUT SINK CURRENT [mA] ±2.5V 0.5 ±3.5V 0.0 -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [°C] 2.0 0.0 75°C 25°C -2.0 -4.0 250 75°C 150 100 -20°C 50 -25 0 25 50 75 ±1.5 ±2.0 ±2.5 ±3.0 ±3.5 ±4.0 Fig. 273 Input Offset Voltage - Supply Voltage 25°C 200 0 -50 ±1.0 (Vicm=0[V], Vout=0[V]) 100 AMBIENT TEMPERATURE [°C] BA4510 family 300 INPUT BIAS CURRENT [nA] 1.0 -20°C BA4510 family 300 INPUT BIAS CURRENT [nA] ±1.5V 4.0 SUPPLY VOLTAGE [V] (VCC/VEE=2.5[V]/-2.5[V],Ta=25[℃]) 1.5 BA4510 family 6.0 10 (VCC/VEE=2.5[V]/-2.5[V],Ta=25[℃]) family 100 -6.0 0 Fig. 272 Maximum Output Voltage - Output Sink Current BA4510 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] (VCC/VEE=2.5[V]/-2.5[V], RL=10[kΩ]) BA4510 family Fig. 271 Maximum Output Voltage - Output Source Current 2.0 VOL (RL=10[kΩ],Ta=25[℃]) -3.0 0 -1 Fig. 270 Maximum Output Voltage - Ambient Temperature -2.5 0.0 0 -50 INPUT OFFSET VOLTAGE [mV] OUTPUT VOLTAGE [V] VOH VOH 1 ±4.0 -0.5 2.0 BA4510 family Fig. 269 Maximum Output Voltage - Supply Voltage 0.0 2.5 100 -3 -4 0.1 75 -2 -3 -3 50 2 2 OUTPUT VOLTAGE [V] VOH 25 3 3 2 0 Fig. 267 Supply Current - Ambient Temperature BA4510 family 4 -25 AMBIENT TEMPERATURE [℃] Fig. 266 Supply Current - Supply Voltage BA4510 family 3 OUTPUT VOLTAGE [V] 7V 8 SUPPLY CURRENT [mA] 600 0 INPUT OFFSET VOLTAGE [mV] BA4510 family 10 -20℃ 8 0 OUTPUT VOLTAGE [V] BA4510 family 10 SUPPLY CURRENT [mA] POWER DISSIPATION [mW] . 800 250 ±3.5V ±2.5V 200 150 ±1.5V 100 50 0 ±1.0 ±1.5 ±2.0 ±2.5 ±3.0 ±3.5 ±4.0 SUPPLY VOLTAGE [V] Fig. 274 Input Offset Voltage - Ambient Temperature Fig. 275 Input Bias Current - Supply Voltage Fig. 276 Input Bias Current - Ambient Temperature (Vicm=0[V], Vout=0[V]) (Vicm=0[V], Vout=0[V]) (Vicm=0[V], Vout=0[V]) (*)The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 37/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Reference Data BA4510 family BA4510 family 25°C 10 -20°C 5 0 -5 75°C -10 -15 -20 ±2.5V ±1.5 ±2.0 ±2.5 ±3.0 ±3.5 SUPPLY VOLTAGE [V] 5 0 -5 ±3.5V -10 -15 ±4.0 -25 0 25 50 75 AMBIENT TEMPERATURE [°C] 75℃ -5 25℃ -10 -20℃ -15 -3 100 Fig. 278 Input Offset Current - Ambient Temperature (Vicm=0[V], Vout=0[V]) (Vicm=0[V], Vout=0[V]) COMMON MOD E R EJEC TION R ATIO [dB] 90 60 30 0 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] 100 80 60 40 20 0 -5 0 100 Fig. 280 Large Signal Voltage Gain - Ambient Temperature ±3.5V 6 ±2.5V 4 40 20 0 -50 6 ±2.5V ±1.5V 2 0 0 -50 100 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] Fig. 284 Slew Rate H-L - Ambient Temperature BA4510 family BA4510 family 1kHz 0.1 20Hz 20kHz 0.01 0.001 0.01 100 Fig. 283 Slew Rate L-H - Ambient Temperature 100 BA4510 family 1 ±3.5V 4 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] Fig. 282 Power Supply Rejection Ratio - Ambient Temperature ±1.5V 40 60 100 8 2 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] 80 BA4510 family 10 SLEW RATE H-L [V/μs] 8 -50 100 Fig. 281 Common Mode Rejection Ratio - Ambient Temperature BA4510 family 10 -25 0 25 50 75 AMBIEN T TEMPER ATUR E [°C] BA4510 family 120 TOTAL HARMONIC DISTORTION [%] -50 (VCC/VEE=2.5[V]/-2.5[V]) BA4510 family 120 -2 -1 0 1 2 3 COMMON MODE INPUT VOLTAGE [V] Fig. 279 Input Offset Voltage - Common Mode Input Voltage POWER SUPPLY REJECTION RATIO [dB] BA4510 family 120 0.1 1 OUTPUT VOLTAGE [Vrms] 10 Fig. 285 Total Harmonic Distortion - Output Voltage (VCC/VEE=2.5[V]/-2.5[V], RL=3[kΩ]80[kHz]-LPF,Ta=25[℃]) 60 50 Phase 0 -30 40 20 -60 Gain 30 -90 20 -120 10 -150 PHASE [deg] 30 GAIN [dB] EQUIVALENT INPUT NOISE VOLTAGE [nV/√Hz] 0 -20 -50 Fig. 277 Input Offset Current - Supply Voltage 150 SLEW RATE L-H [V/us] ±1.5V -20 ±1.0 LARGE SIGNAL VOLTAGE GAIN [dB] 15 10 BA4510 family 5 INPUT OFFSET VOLTAGE [mV] 15 BA4510 family 20 INPUT OFFSET CURRENT [nA] INPUT OFFSET CURRENT [nA] 20 10 0 -180 1.E+02 1.E+03 1.E+04 1.E+05 1.E+06 1.E+07 FREQUENCY [Hz] 0 1 10 100 1000 FREQUENCY [Hz] 10000 Fig. 286 Equivalent Input Noise Voltage - Frequency (VCC/VEE=2.5[V]/-2.5[V]) Fig. 287 Voltage Gain - Frequency (VCC/VEE=2.5[V]/-2.5[V], Av=40[dB], RL=10[kΩ]) (*)The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 38/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note . ●Reference Data BA2115 family BA2115 family BA2115 family 7 BA2115 family 7 . 1000 SUPPLY CURRENT [mA] BA2115F 600 400 BA2115FVM 200 6 -40℃ SUPPLY CURRENT [mA] POWER DISSIPATION [mW] 6 800 5 25℃ 4 85℃ 3 2 1 0 25 50 75 85 100 AMBIENT TEMPERATURE [℃] Fig. 288 Derating Curve 5 10 SUPPLY VOLTAGE [V] 5.0V 3.0V 2 15 -50 Fig. 289 Supply Current - Supply Voltage BA2115 family 3 3 0 0 125 4 1 0 0 14.0V 5 100 Fig. 290 Supply Current - Ambient Temperature BA2115 family 10 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] BA2115 family 12 8 2 0 -1 VOL OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] 4 2 0 -2 -4 -6 -2 -3 0.1 10 100 1000 LOAD RESISTANCE [kΩ] 10000 ±2 (VCC/VEE=+2.5[V]/-2.5[V]) BA2115 family 3.0 ±4 ±5 ±6 ±7 SUPPLY VOLTAGE [V] 2.0 VOH 1.5 1.0 0.5 1.2 1.6 -2 2 4 6 8 ±2 ±3 ±4 ±5 ±6 ±7 ±8 SUPPLY VOLTAGE [V] Fig. 296 Input Offset Voltage - Supply Voltage (Vicm=0[V], Vout=0[V]) -2 25℃ 200 INPUT BIAS CURRENT [nA] ±1.5V BA2115 family 250 . .. ±7.0V 0 -40℃ 150 85℃ 100 -3 50 100 AMBIENT TEMPERATURE [°C] ±1.5V 200 ±2.5V 150 ±7.0V 100 50 0 0 75 -4 ±1 BA2115 family 250 INPUT BIAS CURRENT [nA] 1 50 -2 (VCC/VEE=+2.5[V]/-2.5[V]) 2 25 0 10 Fig. 295 Maximum Output Voltage - Output Sink Current BA2115 family 0 2 OUTPUT SINK CURRENT [mA] (VCC/VEE=+2.5[V]/-2.5[V]) -25 4 -6 0 Fig. 294 -1 100 BA2115 family 6 VOL Maximum Output Voltage - Output Source Current ±2.5V 75 (VCC/VEE=+7.5[V]/-7.5[V], RL=10[kΩ]) BA2115 family OUTPUT SOURCE CURRENT [mA] 3 50 (RL=10[kΩ]) -1.5 2.0 25 Fig. 293 Maximum Output Voltage - Ambient Temperature -3 0.8 0 Fig. 292 Maximum Output Voltage - Supply Voltage -2.5 0.4 -25 AMBIENT TEMPERATURE [℃] -1 0.0 INPUT OFFSET VOLTAGE [mV] -12 -50 ±8 -0.5 OUTPUT VOLTAGE [V] OUTPUT VOLTAGE [V] ±3 VOL -8 0 2.5 -50 -4 -10 1 Fig. 291 Output Voltage - Load Resistance 0.0 0 VOL -8 VOH 4 INPUT OFFSET VOLTAGE [mV] OUTPUT VOLTAGE [V] 1 8 VOH 6 VOH ±1 ±2 ±3 ±4 ±5 ±6 ±7 ±8 SUPPLY VOLTAGE [V] -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE [°C] Fig. 297 Input Offset Voltage - Ambient Temperature Fig. 298 Input Bias Current - Supply Voltage Fig. 299 Input Bias Current - Ambient Temperature (Vicm=0[V], Vout=0[V]) (Vicm=0[V], Vout=0[V]) (Vicm=0[V], Vout=0[V]) (*)The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 39/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Reference Data BA2115 family BA2115 family INPUT OFFSET CURRENT [nA] INPUT OFFSET CURRENT [nA] 30 20 -40℃ 10 25℃ 0 85℃ -10 -20 -30 BA2115 family 40 30 20 ±1.5V 10 0 -10 ±2.5V ±7.0V -20 -30 -40 -40 ±1 ±2 ±3 ±4 ±5 ±6 SUPPLY VOLTAGE [V] ±7 15 10 5 0 85℃ -5 25℃ -10 -40℃ -15 -20 -50 ±8 BA2115 family 20 INPUT OFFSET VOLTAGE [mV] . 40 -25 0 25 50 75 AMBIENT TEMPERATURE [℃] 100 -2.5 -2 -1.5 -1 -0.5 0 0.5 1 1.5 2 2.5 COMMON MODE INPUT VOLTAGE [V] Fig. 300 Input Offset Current - Supply Voltage Fig. 301 Input Offset Current - Ambient Temperature (Vicm=0[V], Vout=0[V]) (Vicm=0[V], Vout=0[V]) Fig. 302 Input Offset Voltage - Common Mode Input Voltage 100 75 50 25 0 -25 0 25 50 75 AMBIENT TEMPERATURE [°C] 100 50 25 0 100 -50 (VCC/VEE=+2.5[V]/-2.5[V]) (VCC/VEE=+2.5[V]/-2.5[V]) BA2115 family -40℃ 25℃ 4 3 85℃ 2 ±2 ±3 ±4 ±5 ±6 SUPPLY VOLTAGE[V] ±7 2.0 Fig. 306 Slew Rate L-H - Supply Voltage ±2 ±3 ±4 ±5 ±6 SUPPLY VOLTAGE [V] ±7 100 BA2115 family 0.1 20kHz 0.01 1kHz 20Hz 0.01 ±8 Fig. 307 Slew Rate H-L - Supply Voltage BA2115 family 40 -25 0 25 50 75 AMBIENT TEMPERATURE [°C] 0.001 ±1 ±8 0 (VCC/VEE=+2.5[V]/-2.5[V]) 3.0 0.0 25 1 85℃ 0 50 Fig. 305 Power Supply Rejection Ratio - Ambient Temperature 4.0 1.0 75 -50 25℃ -40℃ 5.0 1 100 BA2115 family 7.0 SLEW RATE H-L [V/μs] 5 125 100 6.0 ±1 BA2115 family 50 0.1 1 OUTPUT VOLTAGE [Vrms] 10 Fig. 308 Total Harmonic Distortion - Output Voltage (VCC/VEE=2.5[V]/-2.5[V], RL=3[kΩ] 80[kHz]-LPF,Ta=25[℃]) 0 Phase -30 40 30 GAIN [dB] . EQUIVALENT INPUT NOISE VOLTAGE [nV/√Hz] -25 0 25 50 75 AMBIENT TEMPERATURE [°C] Fig. 304 Common Mode Rejection Ratio - Ambient Temperature 6 SLEW RATE L-H [V/us] 75 Fig. 303 Large Signal Voltage Gain - Ambient Temperature 7 . 125 BA2115 family 150 TOTAL HARMONIC DISTORTION [%] -50 150 POWER SUPPLY REJECTION RATIO [dB] 125 BA2115 family 20 Gain -60 30 -90 20 -120 PHASE [deg] . LARGE SIGNAL VOLTAGE GAIN [dB] . 150 COMMON MODE REJECTION RATIO [dB] . (VCC/VEE=+2.5[V]/-2.5[V], Vout=0[V]) BA2115 family 10 10 0 1 100 10000 FREQUENCY [Hz] -150 0 -180 1.E+02 1.E+03 1.E+04 1.E+05 1.E+06 1.E+07 FREQUENCY [Hz] Fig. 309 Equivalent Input Noise Voltage - Frequency Fig. 310 Voltage Gain - Frequency (VCC/VEE=2.5[V]/-2.5[V]) (VCC/VEE=2.5[V]/-2.5[V], Av=40[dB], RL=10[kΩ]) (*)The above data is ability value of sample, it is not guaranteed. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 40/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Schematic diagram VCC VCC －IN －IN VOUT ＋IN VOUT ＋IN VEE VEE Fig. 312 Simplified schematic (BA14741) Fig. 311 Simplified schematic (BA4558/BA4558R/BA15218/BA4560/BA4564R/ BA4560R/BA4580R/BA4584/BA4584R/BA8522R) VCC VCC －IN －IN VOUT ＋IN VOUT ＋IN VEE VEE Fig. 313 Simplified schematic (BA15532) Fig. 314 Simplified schematic (BA4510/BA2115) ●Test circuit 1 NULL method VCC, VEE, EK, Vicm Unit: [V], Vicm=0[V] for all parameter Parameter VF S1 S2 BA4558/BA4558R BA4580R/BA4584 S3 BA4560/BA4560R BA4584R/BA8522R BA4564R BA15218/BA14741 (*35) Vcc VEE EK Vcc VEE BA15532 BA4510 BA2115 Calculation EK Vcc VEE EK Vcc VEE EK Vcc VEE EK Input Offset Voltage VF1 ON ON OFF 15 -15 0 15 -15 0 15 -15 0 2.5 -2.5 0 2.5 -2.5 0 1 Input Offset Current VF2 OFF OFF OFF 15 -15 0 15 -15 0 15 -15 0 2.5 -2.5 0 2.5 -2.5 0 2 VF3 OFF ON 15 -15 0 15 -15 0 15 -15 0 2.5 -2.5 0 2.5 -2.5 0 15 -15 0 15 -15 0 15 -15 0 2.5 -2.5 0 2.5 -2.5 0 15 -15 -10 15 -15 -10 15 -15 -10 2.5 -2.5 -1.0 2.5 -2.5 -1.0 15 -15 10 15 -15 10 15 -15 10 2.5 -2.5 3 -27 12 3 -27 12 3 -27 12 1.5 -3.5 -1.0 1.5 -3.5 -1.0 27 -3 -12 27 -3 -12 27 -3 -12 3.5 -1.5 4 -4 0 2 -2 0 3 -3 0 1.25 -1.25 0 0.75 -1.25 0 15 -15 0 16 -16 0 20 -20 0 3.0 0 7.0 -7.0 Input Bias Current Large Signal Voltage Gain VF4 ON OFF VF5 VF6 ON ON Common-mode Rejection VF7 Ratio (Input Common-mode ON Voltage Range) Power Supply Rejection Ratio VF10 ON ON OFF VF8 VF9 OFF ON ON OFF -3.0 1.0 3 4 2.5 -2.5 1.0 1.0 5 3.5 -1.5 1.0 6 0 (*35) S3 is always ON for BA15532. C2 0.1[μF] -Calculation1. Input Offset Voltage (Vio) | VF1 | Vio = 2. Input Offset Current (Iio) 4. Ri ×(1 + Rf / Rs) Input Bias Current (Ib) Ib = [V] | VF2－VF1 | Iio = 3. 1 + Rf / Rs | VF4－VF3 | 2×Ri× (1 + Rf / Rs) Large Signal Voltage Gain (Av) Av = 20×Log Rf 50[kΩ] RK S1 [A] [A] ΔEK×(1+Rf /Rs) |VF5-VF6| 5. Vicm PSRR = 20×Log 0.1[μF] 10[kΩ] 50[Ω] 10[kΩ] +15[V] NULL S3 Ri S2 RK 500[kΩ] DUT VEE RL C3 1000[pF] -15[V] V VF Fig. 315 Test circuit 1 (one channel only) |VF8-VF7| [dB] ΔVcc×(1+Rf /Rs) |VF10-VF9| www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. C1 [dB] ΔVicm×(1+Rf /Rs) Power Supply Rejection Ratio (PSRR) EK 500[kΩ] Ri 50[Ω] Rs Common-mode Rejection Ratio (CMRR) CMRR = 20×Log 6. Rs VCC [dB] 41/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Test circuit 2 switch condition SW SW SW SW SW SW SW SW SW SW SW SW SW SW 1 2 3 4 5 6 7 8 9 10 11 12 13 14 SW No. Supply Current OFF OFF OFF ON OFF ON OFF OFF OFF OFF OFF OFF OFF OFF Maximum Output Voltage Load Resistance OFF OFF ON OFF OFF OFF ON OFF ON OFF OFF OFF ON ON Output Current OFF OFF ON OFF OFF OFF ON OFF OFF OFF OFF ON ON OFF Slew Rate OFF OFF OFF ON OFF OFF OFF ON ON ON OFF OFF OFF OFF Gain Bandwidth Product OFF ON OFF OFF ON ON OFF OFF ON ON ON OFF OFF OFF Total Harmonic Distortion ON OFF OFF OFF ON OFF ON OFF ON ON ON OFF OFF OFF Input Noise Voltage (*36) ON OFF OFF OFF ON ON OFF OFF OFF OFF ON OFF OFF OFF (*36) This condition refers only to BA4558R/BA4560R/BA4564R Voltage 電圧 SW4 VH R2 SW5 VCC VL A － SW1 RS SW2 ＋ SW3 SW6 R1 SW7 SW8 SW9 SW10 SW11 SW12 SW13 Voltage 電圧 SW14 SR＝ΔV/Δt VH VEE ΔV A ～ VIN- VIN+ CL RL ～ time 時間 Input 入力電圧波形 Voltage Waveform V ～ V VOUT VL Δt Output Voltage Waveform 出力電圧波形 Fig. 316 Test circuit 2 (one channel only) time 時間 Fig. 317 Slew rate input output wave ●Test circuit 3 Channel separation VCC VCC R1//R2 R1//R2 OTHER CH VEE R1 VEE R2 V VIN VOUT1 =0.5[Vrms] R1 R2 V CS＝20 ×log VOUT2 100×VOUT1 VOUT2 Fig. 318 Test circuit 3 (VCC=+15[V], VEE=-15[V], R1=1[kΩ], R2=100[kΩ]) www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 42/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Derating curve Power dissipation (total loss) indicates the power that can be consumed by IC at Ta=25℃(normal temperature).IC is heated when it consumed power, and the temperature of IC ship becomes higher than ambient temperature. The temperature that can be accepted by IC chip depends on circuit configuration, manufacturing process, and consumable power is limited. Power dissipation is determined by the temperature allowed in IC chip (maximum junction temperature) and thermal resistance of package (heat dissipation capability). The maximum junction temperature is typically equal to the maximum value in the storage temperature range. Heat generated by consumed power of IC radiates from the mold resin or lead frame of the package. The parameter which indicates this heat dissipation capability (hardness of heat release) is called thermal resistance, represented by the symbol θj-a[℃/W]. The temperature of IC inside the package can be estimated by this thermal resistance. Fig.319 (a) shows the model of thermal resistance of the package. Thermal resistance θja, ambient temperature Ta, junction temperature Tj, and power dissipation Pd can be calculated by the equation below: θja = (Tj-Ta) / Pd [℃/W] ・・・・・ (Ⅰ) Derating curve in Fig.319 (b) indicates power that can be consumed by IC with reference to ambient temperature. Power that can be consumed by IC with reference to ambient temperature. Power that can be consumed by IC begins to attenuate at certain ambient temperature. This gradient is determined by thermal resistance θja. Thermal resistance θja depends on chip size, power consumption, package, ambient temperature, package condition, wind velocity, etc even when the same of package is used. Thermal reduction curve indicates a reference value measured at a specified condition. Fig.320(c), ～, (f) show a derating curve for an example of BA4558, BA4558R, BA4560, BA4560R, BA4564R, BA4580R, BA4584, BA4584R, BA8522R, BA15218, BA14741, BA15532, BA4510, BA2115. Power dissipation of LSI [W] LSIの 消 費 電 力 [W] θja = ( Tj ー Ta ) / Pd [℃/W] Pd (max) P2 Ta [℃] Ta [℃] 周囲温度 Ambient temperature θja2 < θja1 θ' ja2 P1 θ ja2 Tj ' (max) θ' ja1 Chip surface temperature Tj [℃] チップ 表面温度 Tj [℃] Power dissipation P [W] 0 消費電力 P [W] 25 50 Tj (max) θ ja1 75 100 125 150 ] [℃] Ambient 周 temperature 囲 温 度 Ta [℃Ta (a) Thermal resistance (b) Derating curve Fig. 319 Thermal resistance and derating curve 1000 1000 BA4558RFVM BA4564RFVM BA4580RFVM BA8522RFVM BA4558RFV BA4564RFV BA8522RFV BA2115FVM 400 BA2115F 200 容量損失 Pd [mW] 容量損失 Pd [mW] Power Dissipation [mW] 690mW (*38) 590mW (*39) 600 BA4564RFV BA4584RFV 800 Power Dissipation [mW] 780mW (*37) 800 870mW (*40) BA4558RF BA4564RF BA4580RF BA8522RF 610mW (*41) 600 BA4584RF 400 200 BA4584FV 0 0 0 25 50 75 100 125 0 Ambient Temperature 周囲温度 Ta [℃] Ta [℃] 100 125 800 600 550mW (*43) BA15532F 400 BA4510F 容量損失 Pd [mW] 620mW (*42) BA4558F BA4560F BA15218F BA4510F Power Dissipation [mW] 800 容量損失 Pd [mW] 75 1000 1000 600 BA14741F 490mW (*44) 400 200 200 0 0 0 25 50 75 100 Ambient temperature 周囲温度 Ta [℃]Ta [℃] 0 125 25 (*38) 5.5 (*39) 4.7 (*40) 7.0 50 75 100 125 Ambient Temperature 周囲温度 Ta [℃] Ta [℃] (f)BA14741F (e)BA4558/BA4560/BA15218/BA15532/BA4510 family (*37) 6.2 50 (d)BA4564R/BA4584/BA4584R family (c)BA4558R/BA4560R/BA4580R/BA8522R/BA2115 family Power Dissipation [mW] 25 Ambient temperature 周囲温度 Ta [℃] Ta [℃] (*41) 5.3 (*42) 6.2 (*43) 5.5 (*44) 4.9 Unit [mW/℃] When using the unit above Ta=25[℃], subtract the value above per degree[℃]. Permissible dissipation is the value. When FR4 glass epoxy board 70[mm]×70[mm]×1.6[mm] (cooper foil area below 3[%]) is mounted. Fig. 320 Derating curve www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 43/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM ●Notes for use 1) Processing of unused circuit It is recommended to apply connection (see the Fig.321) and set the non inverting input terminal at the potential within input common-mode voltage range (Vicm), for any unused circuit. 2) Input voltage Applying VEE~VEE+36[V] (BA4580R, BA4584, BA4584R family), VEE+14[V] (BA2115 family) (VEE - 0.3) ~ (VEE + 36)[V] ( BA4558R, BA4560R, 4564R, BA8522R)to the input terminal is possible without causing deterioration of the electrical characteristics or destruction, irrespective of the supply voltage. However, this does not ensure normal circuit operation. Please note that the circuit operates normally only when the input voltage is within the common mode input voltage range of the electric characteristics. 3) Maximum output voltage Because the output voltage range becomes narrow as the output current Increases, design the application with margin by considering changes in electrical characteristics and temperature characteristics. 4) Short-circuit of output terminal When output terminal and VCC or VEE terminal are shorted, excessive Output current may flow under some conditions, and heating may destroy IC. It is necessary to connect a resistor as shown in Fig.322, thereby protecting against load shorting. 5) Power supply (split supply / single supply) in used Op-amp operates when specified voltage is applied between VCC and VEE. Therefore, the single supply Op-Amp can be used for double supply Op-Amp as well. Technical Note VCC Connect to Vicm VEE Fig. 321 The example of application circuit for unused op-amp VCC protection resistor VEE Fig. 322 The example of output short protection 6) Power dissipation (Pd) Use a thermal design that allows for a sufficient margin in light of the power dissipation (Pd) in actual operating conditions. 7) Short-circuit between pins and wrong mounting Pay attention to the assembly direction of the ICs. Wrong mounting direction or shorts between terminals, GND, or other components on the circuits, can damage the IC. 8) Use in strong electromagnetic field Using the ICs in strong electromagnetic field can cause operation malfunction. 9) Radiation This IC is not designed to be radiation-resistant. 10) Handing of IC When stress is applied to IC because of deflection or bend of board, the characteristics may fluctuate due to piezoelectric (piezo) effect. 11) Inspection on set board During testing, turn on or off the power before mounting or dismounting the board from the test Jig. Do not power up the board without waiting for the output capacitors to discharge. The capacitors in the low output impedance terminal can stress the device. Pay attention to the electro static voltages during IC handling, transportation, and storage. 12) Output capacitor When VCC terminal is shorted to VEE (GND) potential and an electric charge has accumulated on the external capacitor, connected to output terminal, accumulated charge may be discharged VCC terminal via the parasitic element within the circuit or terminal protection element. The element in the circuit may be damaged (thermal destruction). When using this IC for an application circuit where there is oscillation, output capacitor load does not occur, as when using this IC as a voltage comparator. Set the capacitor connected to output terminal below 0.1[μF] in order to prevent damage to IC. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 44/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Description of electrical characteristics Described here are the terms of electric characteristics used in this technical note. Items and symbols used are also shown. Note that item name and symbol and their meaning may differ from those on another manufacture’s document or general document. 1. Absolute maximum ratings Absolute maximum rating item indicates the condition which must not be exceeded. Application of voltage in excess of absolute maximum rating or use out of absolute maximum rated temperature environment may cause deterioration of characteristics. 1.1 Power supply voltage (VCC-VEE) Indicates the maximum voltage that can be applied between the positive power supply terminal and negative power supply terminal without deterioration or destruction of characteristics of internal circuit. 1.2 Differential input voltage (Vid) Indicates the maximum voltage that can be applied between non-inverting terminal and inverting terminal without deterioration and destruction of characteristics of IC. 1.3 Input common-mode voltage range (Vicm) Indicates the maximum voltage that can be applied to non-inverting terminal and inverting terminal without deterioration or destruction of characteristics. Input common-mode voltage range of the maximum ratings not assure normal operation of IC. When normal operation of IC is desired, the input common-mode voltage of characteristics item must be followed. 1.4 Power dissipation (Pd) Indicates the power that can be consumed by specified mounted board at the ambient temperature 25℃(normal temperature). As for package product, Pd is determined by the temperature that can be permitted by IC chip in the package (maximum junction temperature)and thermal resistance of the package. 2. Electrical characteristics item 2.1 Input offset voltage (Vio) Indicates the voltage difference between non-inverting terminal and inverting terminal. It can be translated into the input voltage difference required for setting the output voltage at 0 [V] . 2.2 Input offset current (Iio) Indicates the difference of input bias current between non-inverting terminal and inverting terminal. 2.3 Input bias current (Ib) Indicates the current that flows into or out of the input terminal. It is defined by the average of input bias current at non-inverting terminal and input bias current at inverting terminal. 2.4 Input common-mode voltage range(Vicm) Indicates the input voltage range where IC operates normally. 2.5 Large signal voltage gain (AV) Indicates the amplifying rate (gain) of output voltage against the voltage difference between non-inverting terminal and Inverting terminal. It is normally the amplifying rate (gain) with reference to DC voltage. Av = (Output voltage fluctuation) / (Input offset fluctuation) 2.6 Circuit current (ICC) Indicates the IC current that flows under specified conditions and no-load steady status. 2.7 Output sink current (IOL) Denotes the maximum current that can be output under specific output conditions. 2.8 Output saturation voltage low level output voltage (VOL) Signifies the voltage range that can be output under specific output conditions. 2.9 Output leakage current, High level output current (I leak) Indicates the current that flows into IC under specified input and output conditions. 2.10 Common-mode rejection ratio (CMRR) Indicates the ratio of fluctuation of input offset voltage when in-phase input voltage is changed. It is normally the fluctuation of DC. CMRR = (Change of Input common-mode voltage) / (Input offset fluctuation) 2.11 Power supply rejection ratio (PSRR) Indicates the ratio of fluctuation of input offset voltage when supply voltage is changed. It is normally the fluctuation of DC. PSRR = (Change of power supply voltage) / (Input offset fluctuation) www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 45/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ○Voltage follower Voltage gain is 0 [dB]. This circuit controls output voltage (Vout) equal input voltage (Vin), and keeps Vout with stable because of high input impedance and low output impedance. Vout is shown next formula. Vout=Vin VDD Vout Vin VSS Fig. 323 Voltage follower circuit ○Inverting amplifier R2 For inverting amplifier, Vi(b) Derating curve voltage gain decided R1 and R2, and phase reversed voltage is outputted. Vout is shown next formula. Vout=-(R2/R1)・Vin Input impedance is R1. VDD Vin R1 Vout R1//R2 VSS Fig. 324 Inverting amplifier circuit ○Non-inverting amplifier R1 R2 VDD Vout For non-inverting amplifier, Vin is amplified by voltage gain decided R1 and R2, and phase is same with Vin. Vout is shown next formula. Vout=(1 + R2/R1)・Vin This circuit realizes high input impedance because Input impedance is operational amplifier’s input Impedance. Vin VSS Fig. 325 Non-inverting amplifier circuit www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 46/48 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note ●Ordering part number B A 4 Part No. 5 5 8 F Part No. 4558, 4558R, 4560, 4560R, 4564R, 4580R, 4584, 4584R, 8522R 15218, 14741, 15532 4510, 2115 V - Package F: SOP8 SOP14 FV: SSOP-B8 SSOP-B14 FVM: MSOP8 E 2 Packaging and forming specification E2: Embossed tape and reel (SOP8/SOP14/SSOP-B8/SSOP-B14) TR: Embossed tape and reel (MSOP8) SOP8 <Tape and Reel information> 7 6 5 +6° 4° −4° 6.2±0.3 4.4±0.2 0.3MIN 8 1 2 3 0.9±0.15 5.0±0.2 (MAX 5.35 include BURR) Tape Embossed carrier tape Quantity 2500pcs Direction of feed E2 The direction is the 1pin of product is at the upper left when you hold ( reel on the left hand and you pull out the tape on the right hand ) 4 0.595 1.5±0.1 +0.1 0.17 -0.05 S S 0.11 0.1 1.27 1pin 0.42±0.1 Reel (Unit : mm) Direction of feed ∗ Order quantity needs to be multiple of the minimum quantity. SOP14 <Tape and Reel information> 8.7 ± 0.2 (MAX 9.05 include BURR) 8 Tape Embossed carrier tape Quantity 2500pcs Direction of feed 0.3MIN 4.4±0.2 6.2±0.3 14 1 E2 The direction is the 1pin of product is at the upper left when you hold ( reel on the left hand and you pull out the tape on the right hand ) 7 1.5±0.1 0.15 ± 0.1 0.11 1.27 0.4 ± 0.1 0.1 1pin Reel (Unit : mm) Direction of feed ∗ Order quantity needs to be multiple of the minimum quantity. SSOP-B8 <Tape and Reel information> 3.0±0.2 (MAX 3.35 include BURR) 0.3MIN 4.4 ± 0.2 6.4 ± 0.3 876 5 Tape Embossed carrier tape Quantity 2500pcs Direction of feed E2 The direction is the 1pin of product is at the upper left when you hold ( reel on the left hand and you pull out the tape on the right hand ) 1.15 ± 0.1 1 23 4 0.15±0.1 0.1 S 0.1 0.22±0.10 (0.52) 0.08 M 0.65 1pin Reel (Unit : mm) www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 47/48 Direction of feed ∗ Order quantity needs to be multiple of the minimum quantity. 2011.08 - Rev.B BA4558F,BA4558R F/FV/FVM,BA4560F,BA4560RF/FV/FVM,BA4564RFVBA4580RF/FVM,BA4584FV, BA4584RF/FV,BA8522RF/FV/FVM,BA15218F,BA14741F,BA15532F,BA4510F/FV,BA2115F/FVM Technical Note SSOP-B14 <Tape and Reel information> 5.0 ± 0.2 8 1 Tape Embossed carrier tape Quantity 2500pcs Direction of feed 0.3Min. 4.4 ± 0.2 6.4 ± 0.3 14 E2 The direction is the 1pin of product is at the upper left when you hold ( reel on the left hand and you pull out the tape on the right hand ) 7 0.10 1.15 ± 0.1 0.15 ± 0.1 0.1 0.65 0.22 ± 0.1 Direction of feed 1pin Reel (Unit : mm) ∗ Order quantity needs to be multiple of the minimum quantity. MSOP8 <Tape and Reel information> 2.8±0.1 4.0±0.2 8 7 6 5 0.6±0.2 +6° 4° −4° 0.29±0.15 2.9±0.1 (MAX 3.25 include BURR) Tape Embossed carrier tape Quantity 3000pcs Direction of feed TR The direction is the 1pin of product is at the upper right when you hold ( reel on the left hand and you pull out the tape on the right hand ) 1 2 3 4 1PIN MARK 1pin +0.05 0.145 −0.03 0.475 0.08±0.05 0.75±0.05 0.9MAX S +0.05 0.22 −0.04 0.08 S Direction of feed 0.65 Reel (Unit : mm) www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 48/48 ∗ Order quantity needs to be multiple of the minimum quantity. 2011.08 - Rev.B Datasheet Notice Precaution on using ROHM Products 1. Our Products are designed and manufactured for application in ordinary electronic equipments (such as AV equipment, OA equipment, telecommunication equipment, home electronic appliances, amusement equipment, etc.). If you (Note 1) , transport intend to use our Products in devices requiring extremely high reliability (such as medical equipment equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or serious damage to property (“Specific Applications”), please consult with the ROHM sales representative in advance. Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of any ROHM’s Products for Specific Applications. (Note1) Medical Equipment Classification of the Specific Applications JAPAN USA EU CHINA CLASSⅢ CLASSⅡb CLASSⅢ CLASSⅢ CLASSⅣ CLASSⅢ 2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which a failure or malfunction of our Products may cause. The following are examples of safety measures: [a] Installation of protection circuits or other protective devices to improve system safety [b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure 3. Our Products are designed and manufactured for use under standard conditions and not under any special or extraordinary environments or conditions, as exemplified below. Accordingly, ROHM shall not be in any way responsible or liable for any damages, expenses or losses arising from the use of any ROHM’s Products under any special or extraordinary environments or conditions. If you intend to use our Products under any special or extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of product performance, reliability, etc, prior to use, must be necessary: [a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents [b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust [c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2 [d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves [e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items [f] Sealing or coating our Products with resin or other coating materials [g] Use of our Products without cleaning residue of flux (even if you use no-clean type fluxes, cleaning residue of flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning residue after soldering [h] Use of the Products in places subject to dew condensation 4. The Products are not subject to radiation-proof design. 5. Please verify and confirm characteristics of the final or mounted products in using the Products. 6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse. is applied, confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect product performance and reliability. 7. De-rate Power Dissipation (Pd) depending on Ambient temperature (Ta). When used in sealed area, confirm the actual ambient temperature. 8. Confirm that operation temperature is within the specified range described in the product specification. 9. ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in this document. Precaution for Mounting / Circuit board design 1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product performance and reliability. 2. In principle, the reflow soldering method must be used; if flow soldering method is preferred, please consult with the ROHM representative in advance. For details, please refer to ROHM Mounting specification Notice - GE © 2014 ROHM Co., Ltd. All rights reserved. Rev.002 Datasheet Precautions Regarding Application Examples and External Circuits 1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the characteristics of the Products and external components, including transient characteristics, as well as static characteristics. 2. You agree that application notes, reference designs, and associated data and information contained in this document are presented only as guidance for Products use. Therefore, in case you use such information, you are solely responsible for it and you must exercise your own independent verification and judgment in the use of such information contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of such information. Precaution for Electrostatic This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron, isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control). Precaution for Storage / Transportation 1. Product performance and soldered connections may deteriorate if the Products are stored in the places where: [a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2 [b] the temperature or humidity exceeds those recommended by ROHM [c] the Products are exposed to direct sunshine or condensation [d] the Products are exposed to high Electrostatic 2. Even under ROHM recommended storage condition, solderability of products out of recommended storage time period may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is exceeding the recommended storage time period. 3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads may occur due to excessive stress applied when dropping of a carton. 4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of which storage time is exceeding the recommended storage time period. Precaution for Product Label QR code printed on ROHM Products label is for ROHM’s internal use only. Precaution for Disposition When disposing Products please dispose them properly using an authorized industry waste company. Precaution for Foreign Exchange and Foreign Trade act Since our Products might fall under controlled goods prescribed by the applicable foreign exchange and foreign trade act, please consult with ROHM representative in case of export. Precaution Regarding Intellectual Property Rights 1. All information and data including but not limited to application example contained in this document is for reference only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any other rights of any third party regarding such information or data. ROHM shall not be in any way responsible or liable for infringement of any intellectual property rights or other damages arising from use of such information or data.: 2. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any third parties with respect to the information contained in this document. Other Precaution 1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM. 2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written consent of ROHM. 3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the Products or this document for any military purposes, including but not limited to, the development of mass-destruction weapons. 4. The proper names of companies or products described in this document are trademarks or registered trademarks of ROHM, its affiliated companies or third parties. Notice - GE © 2014 ROHM Co., Ltd. All rights reserved. Rev.002 Datasheet General Precaution 1. Before you use our Pro ducts, you are requested to care fully read this document and fully understand its contents. ROHM shall n ot be in an y way responsible or liabl e for fa ilure, malfunction or acci dent arising from the use of a ny ROHM’s Products against warning, caution or note contained in this document. 2. All information contained in this docume nt is current as of the issuing date and subj ect to change without any prior notice. Before purchasing or using ROHM’s Products, please confirm the la test information with a ROHM sale s representative. 3. The information contained in this doc ument is provi ded on an “as is” basis and ROHM does not warrant that all information contained in this document is accurate an d/or error-free. ROHM shall not be in an y way responsible or liable for an y damages, expenses or losses incurred b y you or third parties resulting from inaccur acy or errors of or concerning such information. Notice – WE © 2014 ROHM Co., Ltd. All rights reserved. Rev.001