UniFET-IITM FDD5N50NZ N-Channel MOSFET 500V, 4A, 1.5 Features Description • RDS(on) = 1.38 ( Typ.)@ VGS = 10V, ID = 2A These N-Channel enhancement mode power field effect transistors are produced using Fairchild’s proprietary, planar stripe, DMOS technology. • Low Gate Charge ( Typ. 9nC) • Low Crss ( Typ. 4pF) This advance technology has been especially tailored to minimize on-state resistance, provide superior switching performance, and withstand high energy pulse in the avalanche and commutation mode. These devices are well suited for high efficient switching mode power supplies and active power factor correction. • Fast Switching • 100% Avalanche Tested • Improved dv/dt Capability • ESD Imoroved Capability • RoHS Compliant D G S D-PAK MOSFET Maximum Ratings TC = 25oC unless otherwise noted* Symbol VDSS VGSS Drain to Source Voltage Gate to Source Voltage ID Drain Current IDM EAS IAR EAR dv/dt Drain Current Single Pulsed Avalanche Energy Avalanche Current Repetitive Avalanche Energy Peak Diode Recovery dv/dt PD Power Dissipation TJ, TSTG TL Parameter -Continuous (TC = 25oC) -Continuous (TC = 100oC) - Pulsed (TC = 25oC) - Derate above 25oC Operating and Storage Temperature Range Maximum Lead Temperature for Soldering Purpose, 1/8” from Case for 5 Seconds (Note 1) (Note 2) (Note 1) (Note 1) (Note 3) FDD5N50NZ 500 ±25 4 2.4 16 304 4 6.2 10 62 0.5 -55 to +150 Units V V 300 oC FDD5N50NZ Units A A mJ A mJ V/ns W W/oC oC *Drain current limited by maximum junction temperature Thermal Characteristics Symbol Parameter RJC Thermal Resistance, Junction to Case 2.0 RJA Thermal Resistance, Junction to Ambient 90 ©2011 Fairchild Semiconductor Corporation FDD5N50NZ Rev. C0 1 oC/W www.fairchildsemi.com FDD5N50NZ N-Channel MOSFET November 2011 Device Marking FDD5N50NZ Device FDD5N50NZTM Package D-PAK Reel Size 380mm Tape Width 16mm Quantity 2500 Electrical Characteristics TC = 25oC unless otherwise noted Symbol Parameter Test Conditions Min. Typ. Max. Units 500 - - V - 0.5 - V/oC VDS = 500V, VGS = 0V VDS = 400V, TC = 125oC VGS = ±25V, VDS = 0V - - 1 10 ±10 VGS = VDS, ID = 250A VGS = 10V, ID = 2A VDS = 20V, ID = 2A 3.0 - 1.38 5.0 1.5 V - 3.54 - S - 330 50 4 9 2 440 70 6 12 - pF pF pF nC nC (Note 4, 5) - 4 - nC (Note 4, 5) - 12 22 28 21 35 55 65 50 ns ns ns ns - 210 4 16 1.4 - A A V ns - 1.1 - C Off Characteristics BVDSS BVDSS TJ Drain to Source Breakdown Voltage Breakdown Voltage Temperature Coefficient IDSS Zero Gate Voltage Drain Current IGSS Gate to Body Leakage Current ID = 250A, VGS = 0V, TJ = 25oC ID = 250A, Referenced to 25oC A A On Characteristics VGS(th) RDS(on) Gate Threshold Voltage Static Drain to Source On Resistance gFS Forward Transconductance (Note 4) Dynamic Characteristics Ciss Coss Crss Qg(tot) Qgs Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge at 10V Gate to Source Gate Charge Qgd Gate to Drain “Miller” Charge VDS = 25V, VGS = 0V f = 1MHz VDS = 400V ID = 4A VGS = 10V Switching Characteristics td(on) tr td(off) tf Turn-On Delay Time Turn-On Rise Time Turn-Off Delay Time Turn-Off Fall Time VDD = 250V, ID = 4A VGS = 10V, RG = 25 Drain-Source Diode Characteristics IS ISM VSD trr Qrr Maximum Continuous Drain to Source Diode Forward Current Maximum Pulsed Drain to Source Diode Forward Current Drain to Source Diode Forward Voltage VGS = 0V, ISD = 4A Reverse Recovery Time VGS = 0V, ISD = 4A dIF/dt = 100A/s Reverse Recovery Charge (Note 4) Notes: 1. Repetitive Rating: Pulse width limited by maximum junction temperature 2. L = 38mH, IAS = 4A, VDD = 50V, RG = 25, Starting TJ = 25C 3. ISD 4A, di/dt 200A/s, VDD BVDSS, Starting TJ = 25C 4. Pulse Test: Pulse width 300s, Dual Cycle 2% 5. Essentially Independent of Operating Temperature Typical Characteristics FDD5N50NZ Rev. C0 2 www.fairchildsemi.com FDD5N50NZ N-Channel MOSFET Package Marking and Ordering Information Figure 1. On-Region Characteristics Figure 2. Transfer Characteristics Figure 3. On-Resistance Variation vs. Drain Current and Gate Voltage Figure 4. Body Diode Forward Voltage Variation vs. Source Current and Temperature Figure 5. Capacitance Characteristics Figure 6. Gate Charge Characteristics FDD5N50NZ Rev. C0 3 www.fairchildsemi.com FDD5N50NZ N-Channel MOSFET Typical Performance Characteristics Figure 7. Breakdown Voltage Variation vs. Temperature Figure 8. On-Resistance Variation vs. Temperature Figure 9. Maximum Safe Operating Area vs. Case Temperature Figure 10. Maximum Drain Current Figure 11. Transient Thermal Response Curve PDM t1 FDD5N50NZ Rev. C0 4 t2 www.fairchildsemi.com FDD5N50NZ N-Channel MOSFET Typical Performance Characteristics (Continued) FDD5N50NZ N-Channel MOSFET Gate Charge Test Circuit & Waveform Resistive Switching Test Circuit & Waveforms Unclamped Inductive Switching Test Circuit & Waveforms FDD5N50NZ Rev. C0 5 www.fairchildsemi.com FDD5N50NZ N-Channel MOSFET Peak Diode Recovery dv/dt Test Circuit & Waveforms FDD5N50NZ Rev. C0 6 www.fairchildsemi.com FDD5N50NZ N-Channel MOSFET Mechanical Dimensions D-PAK Dimensions in Millimeters FDD5N50NZ Rev. C0 7 www.fairchildsemi.com *Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used here in: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation’s Anti-Counterfeiting Policy. Fairchild’s Anti-Counterfeiting Policy is also stated on our external website, www.Fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufactures of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed application, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild’s quality standards for handing and storage and provide access to Fairchild’s full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address and warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I55 FDD5N50NZ Rev. C0 8 www.fairchildsemi.com FDD5N50NZ N-Channel MOSFET TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. The Power Franchise® 2Cool™ PDP SPM™ FlashWriter® * AccuPower™ FPS™ Power-SPM™ The Right Technology for Your Success™ ® Auto-SPM™ F-PFS™ PowerTrench® AX-CAP™* FRFET® PowerXS™ BitSiC® Programmable Active Droop™ Global Power ResourceSM TinyBoost™ QFET® Build it Now™ Green FPS™ TinyBuck™ CorePLUS™ Green FPS™ e-Series™ QS™ TinyCalc™ CorePOWER™ Gmax™ Quiet Series™ TinyLogic® CROSSVOLT™ RapidConfigure™ GTO™ TINYOPTO™ CTL™ IntelliMAX™ ™ TinyPower™ Current Transfer Logic™ ISOPLANAR™ TinyPWM™ Saving our world, 1mW/W/kW at a time™ DEUXPEED® MegaBuck™ TinyWire™ SignalWise™ Dual Cool™ MICROCOUPLER™ TranSiC® SmartMax™ EcoSPARK® MicroFET™ TriFault Detect™ SMART START™ EfficentMax™ MicroPak™ TRUECURRENT®* SPM® ESBC™ MicroPak2™ SerDes™ STEALTH™ MillerDrive™ SuperFET® MotionMax™ SuperSOT™-3 Motion-SPM™ Fairchild® UHC® SuperSOT™-6 mWSaver™ Fairchild Semiconductor® Ultra FRFET™ SuperSOT™-8 OptiHiT™ FACT Quiet Series™ UniFET™ SupreMOS® OPTOLOGIC® FACT® VCX™ OPTOPLANAR® SyncFET™ FAST® ® VisualMax™ Sync-Lock™ FastvCore™ XS™ ®* FETBench™