MCC 1N5926B THRU 1N5956B omponents 21201 Itasca Street Chatsworth !"# $ % !"# Features • • • • 1.5 Watt Zener Diode 11 to 200 Volts Glass Passivated Junction Low Profile Package Low Inductance Built-in Strain Relief DO-41G Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Parameter Symbol Value Unit Forward Voltage at IF=200mA VF 1.5 V D Ptot 1.5 W A Power Dissipation at (1) Cathode Mark TL = 75°C B Pwak forward Surge Current 8.3ms single half D I FSM 10 Amps sine/square wave Junction Temperature C Tj -55 ~ +150 o -55 ~ +150 o C Storage Temperature Range DIMENSIONS TSTG C INCHES MM DIM NOTE MIN MAX MIN MAX A 0.166 0.205 4.10 7.60 B 0.080 0.107 2.00 3.60 Diameter C 0.026 0.034 0.70 0.90 Diameter D 1.000 ----- 25.40 ----- www.mccsemi.com MCC 1N5926B THRU 1N5956B ELECTRICAL CHARACTERISTICS @30°C MCC PART NUMBER 1N5926B 1N5927B 1N5928B 1N5929B 1N5930B 1N5931B 1N5932B 1N5933B 1N5934B 1N5935B 1N5936B 1N5937B 1N5938B 1N5939B 1N5940B 1N5941B 1N5942B 1N5943B 1N5944B 1N5945B 1N5946B 1N5947B 1N5948B 1N5949B 1N5950B 1N5951B 1N5952B 1N5953B 1N5954B 1N5955B 1N5956B ZENER VOLTAGE VZ TEST CURRENT IZT VOLTS mA MAXIMUM DYNAMIC IMPEDANCE ZZT @ IZT OHMS 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 34.1 31.2 28.8 25 23.4 20.8 18.7 17 15.6 13.9 12.5 11.4 10.4 9.6 8.7 8.0 7.3 6.7 6.0 5.5 5.0 4.6 4.1 3.7 3.4 3.1 2.9 2.5 2.3 2.1 1.9 5.5 6.5 7.0 9.0 10 12 14 17.5 19 23 28 33 38 45 53 67 70 86 100 120 140 160 200 250 300 380 450 600 700 900 1200 KNEE CURRENT IZK KNEE IMPEDANCE ZZK REVERSE VOLTAGE VR OHMS MAXIMUM REVERSE CURRENT IR µA mA 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 VOLTS mA 550 550 550 600 600 650 650 650 700 700 750 800 850 900 950 1000 1100 1300 1500 1700 2000 2500 3000 3100 4000 4500 5000 6000 6500 7000 8000 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 8.4 9.1 9.9 11.4 12.2 13.7 15.2 16.7 18.2 20.6 22.8 25.1 27.4 29.7 32.7 35.8 38.8 42.6 47.1 51.2 56 62.2 69.2 76 83.6 91.2 98.8 114 121.6 136.8 152 136 125 115 100 93 83 75 68 62 55 50 45 41 38 34 31 29 26 24 22 20 18 16 15 13 12 11 10 9.0 8.0 7.0 * TOLERANCE AND VOLTAGE DESIGNATION Tolerance designation - The type numbers listed indicate a tolerance of ¡Ó 5% www.mccsemi.com MAXIMUM DC CURRENT IZM MCC 1N5926B THRU 1N5956B £c VZ, TEMPERATURE COEFFICIENT(mV/¢J ) PD, MAXIMUM POWER DISSIPATION (WATTS) 8 2.5 2 1.5 1 0.5 VZ@IZT 6 4 2 0 -2 -4 0 20 40 60 80 100 120 140 150 180 3 4 TL, LEAD TEMPERATURE (¢J) ZZ, DYNAMIC IMPEDANCE (OHMS) £c VZ, TEMPERATURE COEFFICIENT(mV/¢J ) VZ@IZT 100 70 50 30 20 30 50 70 10 12 Fig. 2-ZENER VOLTAGE-TO 12 VOLTS 200 20 8 VZ, ZENER VOLTAGE (VOLTS) Fig. 1-STEADY STATE POWER DERATING 10 10 6 100 200 1K TJ - 25 ¢J IZ(ms) = 0.1 IZ(dc) 500 VZ = 150V 200 100 91V 50 62V 20 10 22V 5 12V 2 1 0.5 6.8V 1 2 5 10 20 50 100 200 500 IZ, ZENER TEST CURRENT (mA) VZ, ZENER VOLTAGE (VOLTS) Fig. 3-ZENER VOLTAGE-10 TO 200 VOLTS Fig. 4-EFFECT OF ZENER CURRENT PPK, PEAK SURGE POWER (WATTS) ZZ, DYNAMIC IMPEDANCE (OHMS) 1K 200 IZ (dc) = 1mA 100 70 50 30 20 10mA 10 7 5 3 2 5 20mA 7 10 IZ (ms) = 0.1 IZ (dc) 20 30 50 70 VZ, ZENER VOLTAGE (VOLTS) Fig. 5 Effect of Zener Voltage 500 RECTANGULAR NONREPETITIVE WAVEFORM TJ = 25¢J PRIOR TO INITIAL PULSE 300 200 100 50 30 20 10 .1 .2 .3 5 1 2 3 5 10 20 50 100 100 PW, PULSE WIDTH(ms) Fig. 6 Maximum Surge Power www.mccsemi.com MCC 100 100 50 30 20 10 50 30 20 10 5 3 2 5 3 2 1 0.5 0.3 0.2 0.1 0 1 2 3 4 5 6 7 8 9 10 VZ, ZENER VOLTAGE (VOLTS) IZ, ZENER CURRENT (mA) IZ, ZENER CURRENT (mA) 1N5926B THRU 1N5956B Fig. 7-VZ = 6.8 THRU 10 VOLTS 1 0.5 0.3 0.2 0.1 0 10 20 30 40 50 60 70 80 90 100 VZ, ZENER VOLTAGE (VOLTS) Fig. 8-VZ = 12 THRU 82 VOLTS NOTES: 2 1. Mounted on 5.0mm (.013mm thick) land areas. 2. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. 3. ZENER VOLTAGE (Vz) MEASUREMENT Nominal zener voltage is measured with the device function in thermal equilibrium with ambient temperature at 25 ¢J . 4.ZENER IMPEDANCE (Zz) DERIVATION ZZT are measured by dividing the ac voltage drop across the device by the accurrent applied. The specified limits are for IZ(ac) = 0.1 IZ, (dc) with the ac freqency = 60Hz. www.mccsemi.com