xppower.com Specification Single & Dual Output • Industry Standard Pinout • SIP or DIP Package • 3000 VDC Isolation (Optional 6000 VDC) • Short Circuit Protection • -40 °C to +85 °C Operation • MTBF >1.2 MHrs Input Voltage Input Input Voltage Range Input Current (no load) Input Reflected Ripple Input Reverse Voltage Protection • • • • • Nominal ±10% See table 20 mA pk-pk None No Load Input Current • • • • Setpoint Accuracy • Ripple & Noise • Temperature Coefficient • Short Circuit Protection • Maximum Capacitive • Load See table None(5) 1.2%/1% ∆ Vin ±10% 20-100% load change (3.3 V models ±20%) ±3% 75 mV pk-pk, 20 MHz BW 0.02%/°C 1 s max 100 µF • • • • • • See table 3000 VDC minimum 109 Ω 60pF typical Variable >1.2 MHrs Operating Temperature Storage Temperature Case Temperature Cooling • • • • -40 °C to +85 °C -40 °C to +125 °C 100 °C max Convection-cooled 5 VDC V V V V V V 300 200 112 84 66 42 mA mA mA mA mA mA 75% 78% 75% 76% 76% 72% IV0503SA IV0505SA† IV0509SA IV0512SA† IV0515SA† IV0524SA 12 VDC 20 20 20 20 20 20 mA mA mA mA mA mA 3.3 5.0 9.0 12.0 15.0 24.0 V V V V V V 300 200 112 84 66 42 mA mA mA mA mA mA 74% 74% 75% 77% 78% 75% IV1203SA IV1205SA† IV1209SA IV1212SA† IV1215SA† IV1224SA 24 VDC 10 10 10 10 10 10 mA mA mA mA mA mA 3.3 5.0 9.0 12.0 15.0 24.0 V V V V V V 300 200 112 84 66 42 mA mA mA mA mA mA 75% 77% 75% 78% 78% 78% IV2405SA IV2405SA IV2409SA IV2412SA IV2415SA IV2424SA † Available from Farnell. See pages 204-206. Mechanical Details SIP Package DIP Package 0.76 (19.50) 0.80 (20.32) 0.24 (6.00) (6) 0.40 (10.16) 0.02 (0.50) 0.27 (6.88) 0.37 (9.50) 0.12 (3.05) 0.10 (2.54) -Vin NC 0.01 (0.25) +Vin -Vin -Vout +Vout +Vin 0.01 (0.25) 0.60 (15.24) Single Output 0V +Vout 0.60 (15.24) -Vin 0.01 (0.25) +Vin -Vin NC -Vout 0V +Vout +Vin 0.60 (15.24) 0.05 (1.25) Dual Output 0.30 (7.62) Single Output Notes 1. For dual output, delete suffix ‘A’, and split current equally between rails. 2. For DIP package, replace ‘S’ in part number with ‘D’. 3. All dimensions in inches (mm). 4. For 48 V nominal input, replace the 3rd & 4th digits of the model number with 48 e.g. IV4812SA. A 4.7-47 µF capacitor is required across the input. 5. Operation at no load will not damage unit but it may not meet all specifications. 6. 48 V model dimension is 0.28 (7.20). 7. For 6000 VDC isolation, add suffix ‘H6’. Model Number(1,2) 3.3 5.0 9.0 12.0 15.0 24.0 0.12 (3.05) Environmental Efficiency mA mA mA mA mA mA General Efficiency Isolation Voltage Isolation Resistance Isolation Capacitance Switching Frequency MTBF Output Current 30 30 30 30 30 30 Output Output Voltage Minimum Load Line Regulation Load Regulation Output Voltage 0.01 (0.25) -Vout 0V +Vout 0.30 (7.62) 0.60 (15.24) Dual Output Notes: 1. Pin diameter: 0.02±0.002 (0.5±0.05) 2. Pin pitch tolerance: ±0.014 (±0.35) 3. Case tolerance: ±0.02 (±0.5) 19-Nov-08 DC-DC 1 Watts IV Series