Ordering number : EN6479A CPH5505 Bipolar Transistor http://onsemi.com –30V, –3A, Low VCE(sat), PNP Dual CPH5 Applications • Relay drivers, lamp drivers, motor drivers, flash Features • • • Composite type with two PNP transistors contained in a single package facilitating high-density mounting The CPH5505 consists of two chips which are equivalent to the CPH3109 encapsulated in a package Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm) Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Collector to Base Voltage Conditions Ratings Unit VCBO VCEO Collector to Emitter Voltage Emitter to Base Voltage Collector Current (Pulse) VEBO IC ICP Base Current IB Collector Dissipation Total Dissipation PC PT Junction Temperature Tj Storage Temperature Tstg Collector Current --30 V --30 V --5 V --3 A --5 A --600 mA When mounted on ceramic substrate (600mm2×0.8mm) 0.9 W When mounted on ceramic substrate (600mm2×0.8mm) 1.2 W 150 °C --55 to +150 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Product & Package Information unit : mm (typ) 7017A-009 • Package : CPH5 • JEITA, JEDEC : SC-74A, SOT-25 • Minimum Packing Quantity : 3,000 pcs./reel 4 Packing Type : TL 3 EE 0.05 1.6 2.8 Marking LOT No. 5 CPH5505-TL-E 0.15 2.9 0.2 0.6 Package Dimensions 0.9 0.2 0.6 TL 1 2 0.95 0.4 1 : Collector 2 : Collector 3 : Base 4 : Emitter Common 5 : Base Electrical Connection B1 EC B2 CPH5 C1 Semiconductor Components Industries, LLC, 2013 November, 2013 C2 N0613 TKIM TC-00003061/D2000TS (KOTO) TA-2845 No.6479-1/6 CPH5505 Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current ICBO IEBO hFE Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product fT Cob Output Capacitance VCE(sat)1 Collector to Emitter Saturation Voltage VCE(sat)2 Base to Emitter Saturation Voltage VBE(sat) V(BR)CBO Collector to Base Breakdown Voltage Collector to Emitter Breakdown Voltage Emitter to Base Breakdown Voltage Turn-ON Time Storage Time Turn-OFF Time Conditions Ratings min typ max VCB= --30V, IE=0A VEB= --4V, IC=0A VCE= --2V, IC= --500mA VCE= --10V, IC= --500mA 200 --0.1 μA --0.1 μA 560 380 VCB= --10V, f=1MHz IC= --1.5A, IB= --30mA MHz 25 IC= --1.5A, IB= --75mA IC= --1.5A, IB= --30mA IC= --10μA, IE=0A V(BR)CEO V(BR)EBO ton IC= --1mA, RBE=∞ IE= --10μA, IC=0A tstg tf See specified Test Circuit. Unit pF --155 --230 mV --105 --155 mV --0.83 --1.2 V --30 V --30 V --5 V 50 ns 270 ns 25 ns Switching Time Test Circuit IB1 PW=20μs D.C.≤1% IB2 INPUT RB 24Ω VR + + 100μF 470μF 50Ω 5V –12V IC=20IB1= –20IB2= –500mA Ordering Information Device CPH5505-TL-E Package Shipping memo CPH5 3,000pcs./reel Pb Free No.6479-2/6 CPH5505 IC -- VCE --3.5 --8mA --6mA --4mA --0.8 --2mA --3.0 --2.5 --2.0 --1.5 Ta=7 5 °C 25° C --25°C --50m A Collector Current, IC -- A --1.6 --1.2 VCE= --2V --10mA A 0m --2 --3 0m A --40mA IC -- VBE --4.0 Collector Current, IC -- A --2.0 --1.0 --0.4 --0.5 IB=0 0 0 --200 --400 --600 --800 Collector to Emitter Voltage, VCE -- V Ta=75°C 3 25°C --25°C 2 100 7 5 2 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 IT01745 Collector Current, IC -- A --1.2 IT01744 VCE(sat) -- IC IC / IB=20 --0.1 7 5 75 Ta= 3 2 ° --25 °C 25 C °C --1.0 7 5 3 2 5°C Ta=7 °C --25 3 2 3 5 7 --0.1 2 C 25° 3 5 7 --1.0 2 3 Gain Bandwidth Product, f T -- MHz 7 5 3 2 7 --10 2 Collector to Base Voltage, VCB -- V 3 3 5 7 --1.0 2 3 5 IT01749 5 7 --10 IT01746 IC / IB=50 3 2 --1.0 Ta= --25°C 7 75°C 5 25°C 3 2 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 IT01748 f T -- IC VCE= --10V 7 100 5 2 VBE(sat) -- IC 1000 f=1MHz 3 5 7 --0.1 Collector Current, IC -- A Cob -- VCB 2 3 5 --0.1 --0.01 5 7 --10 IT01747 Collector Current, IC -- A 2 2 7 3 2 --0.1 7 5 3 2 --10 Base to Emitter Saturation Voltage, VBE(sat) -- V Collector to Emitter Saturation Voltage, VCE(sat) -- V --1.0 Collector Current, IC -- A IC / IB=50 2 Output Capacitance, Cob -- pF --0.8 3 2 --0.01 VCE(sat) -- IC --10 7 5 10 --1.0 --0.6 --0.01 7 5 3 --0.01 --0.01 --0.4 --1.0 7 5 Collector to Emitter Saturation Voltage, VCE(sat) -- V 5 --0.2 Base to Emitter Voltage, VBE -- V VCE= --2V 7 10 --0.01 0 IT01743 hFE -- IC 1000 DC Current Gain, hFE 0 --1000 5 3 2 100 7 5 3 2 10 --10 2 3 5 7 --100 2 3 5 7 --1000 Collector Current, IC -- mA 2 3 IT01750 No.6479-3/6 CPH5505 SOA 0μ 10 ICP= --5A IC= --3A Collector Dissipation, PC -- W --1.0 7 5 DC 3 2 10 ms 10 0m s op era tio n --0.1 7 5 3 2 Ta=25°C Single pulse When mounted on ceramic substrate (600mm2×0.8mm) 1unit --0.01 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 Collector to Emitter Voltage, VCE -- V 1.0 To tal Di ss 1u ip ati nit on 0.9 0.8 0.6 0.4 0.2 When mounted on ceramic substrate (600mm2×0.8mm) 0 3 5 IT01751 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT01820 PC(TR2) -- PC(TR1) 1.0 Collector Dissipation, PC(TR2) -- W 1.2 s s 0μ 50 3 2 PC -- Ta 1.4 s 1m Collector Current, IC -- A --10 7 5 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 When mounted on ceramic substrate (600mm2×0.8mm) 1unit 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Collector Dissipation, PC(TR1) -- W 0.9 1.0 IT01821 No.6479-4/6 CPH5505 Outline Drawing CPH5505-TL-E Land Pattern Example Mass (g) Unit 0.02 mm * For reference Unit: mm 2.4 1.4 0.6 0.95 0.95 No.6479-5/6 CPH5505 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.6479-6/6