Ecliptek EH1100ETTS-70.000M-CL Oscillator Datasheet

EH11 Series
EH11
• RoHS Compliant (Pb-free)
• HCMOS/TTL output
• 5.0V supply voltage
• 14 pin DIP package
• Stability to 20ppm
• Custom lead length,
gull wing options available
H 5.08
W 20.8
L 13.2
OSCILLATOR
ELECTRICAL SPECIFICATIONS
Frequency Range
1.000MHz to 155.520MHz
Operating Temperature Range
0°C to 70°C or -40°C to 85°C
Storage Temperature Range
-55°C to 125°C
Supply Voltage (VDD)
5.0VDC ±10%
Input Current
50mA Maximum (Unloaded)
Frequency Tolerance / Stability
Inclusive of all conditions: Calibration Tolerance at 25°C,
±100ppm, ±50ppm, ±25ppm, or
Frequency Stability over the Operating Temperature Range,
±20ppm Maximum
Supply Voltage Change, Output Load Change, First Year
Aging at 25°C, Shock, and Vibration
2.4VDC Minimum
IOH =-16mA
VDD-0.4VDC Minimum
IOH =-16mA
w/TTL Load
0.4VDC Maximum
IOL =+16mA
w/HCMOS Load
0.5VDC Maximum
IOL =+16mA
at 1.4VDC w/TTL Load; at 50% of waveform w/HCMOS
50 ±10(%) (Standard)
Output Voltage Logic High (VOH) w/TTL Load
w/HCMOS Load
Output Voltage Logic Low (VOL)
Duty Cycle (VDD=5.0VDC)
Load (≤70.000MHz)
50 ±10(%) (Standard)
at 50% of waveform w/ TTL Load or w/HCMOS
Load (>70.000MHz)
Rise Time / Fall Time
at 50% of waveform w/TTL Load or w/HCMOS Load
50 ±5(%) (Optional)
0.8VDC to 2.0VDC w/TTL Load or 20% to 80%
6 nSeconds Maximum
of Waveform w/HCMOS Load (≤70.000MHz)
4 nSeconds Maximum
0.8VDC to 2.0VDC w/TTL Load or 20% to 80%
of Waveform w/HCMOS Load (>70.000MHz)
Tri-State Input Voltage
VIH :No Connection
Enables Output
VIH :≥2.2VDC
Enables Output
VIL :≤0.8VDC
Disables Output: High Impedance
Aging (at 25°C)
±5ppm / year Maximum
Start Up Time
10 mSeconds Maximum
Load Drive Capability
≤70.000MHz
10TTL Load or 50pF HCMOS Load Maximum
>70.000MHz
5TTL Load or 15pF HCMOS Load Maximum
Period Jitter: Absolute
±250pSec Maximum, ±100pSec Typical
Period Jitter: One Sigma
±50pSec Maximum, ±30pSec Typical
MANUFACTURER
CATEGORY
ECLIPTEK CORP.
OSCILLATOR
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
EH11
14 Pin DIP
5.0V
OS44
12/05
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
PART NUMBERING GUIDE
EH11 00 ET T TS - 70.000M - G
FREQUENCY TOLERANCE / STABILITY
00=±100ppm Max.(Standard), 45=±50ppm Max.
25=±25ppm Max., 20=±20ppm Max.
AVAILABLE OPTIONS
Blank=None (Standard)
CLXXX=Custom Lead Length (See Page 133)
G=Full Size Gull Wing (See Page 132)
OPERATING TEMP. RANGE
Blank=0°C to 70°C (Standard), ET=-40°C to 85°C
FREQUENCY
DUTY CYCLE
Blank=50 ±10(%) (Standard), T=50 ±5(%)
OUTPUT CONTROL FUNCTION
TS=Tri-State Enable High
NOTES
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
MECHANICAL DIMENSIONS
MARKING SPECIFICATIONS
ALL DIMENSIONS IN MILLIMETERS
Line 1: ECLIPTEK
Line 2: EH11 TS
Ø
Series Designator
Line 3: XX.XXX M
Frequency in MHz (5 Digits Maximum + Decimal)
Line 4: XX Y ZZ
Pin 1: Tri-State
Pin 7: Case Ground
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
Pin 8: Output
Pin 14: Supply Voltage
Note: Pin 1 shall be designated with a dot
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
Characteristic
Fine Leak Test
Gross Leak Test
Mechanical Shock
Vibration
Lead Integrity
Specification
MIL-STD-883, Method 1014, Condition A
MIL-STD-883, Method 1014, Condition C
MIL-STD-202, Method 213, Condition C
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 2004
Characteristic
Solderability
Temperature Cycling
Resistance to Soldering Heat
Resistance to Solvents
Specification
MIL-STD-883, Method 2002
MIL-STD-883, Method 1010
MIL-STD-883, Method 210
MIL-STD-883, Method 215
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EH11
14 Pin DIP
5.0V
OS44
12/05
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
EH11 Series
EH11
• RoHS Compliant (Pb-free)
• HCMOS/TTL Output
• 5.0V Supply Voltage
• 8 Pin DIP Package
• Stability to 20ppm
• Custom Lead Length and
Gull Wing Options Available
H 5.6
L 13.2
W 13.2
OSCILLATOR
ELECTRICAL SPECIFICATIONS
Frequency Range
1.000MHz to 155.520MHz
Operating Temperature Range
0°C to 70°C or -40°C to 85°C
Storage Temperature Range
-55°C to 125°C
Supply Voltage (VDD)
5.0VDC ±10%
Input Current
50mA Maximum (Unloaded)
Frequency Tolerance / Stability
Inclusive of all conditions: Calibration Tolerance at 25°C,
±100ppm, ±50ppm, ±25ppm, or
Frequency Stability over the Operating Temperature Range,
±20ppm Maximum
Supply Voltage Change, Output Load Change, First Year
Aging at 25°C, Shock, and Vibration
2.4VDC Minimum
IOH =-16mA
VDD-0.4VDC Minimum
IOH =-16mA
w/TTL Load
0.4VDC Maximum
IOL =+16mA
w/HCMOS Load
0.5VDC Maximum
IOL =+16mA
at 1.4VDC w/TTL Load; at 50% of waveform w/HCMOS
50 ±10(%) (Standard)
Output Voltage Logic High (VOH) w/TTL Load
w/HCMOS Load
Output Voltage Logic Low (VOL)
Duty Cycle (VDD=5.0VDC)
Load (≤70.000MHz)
50 ±10(%) (Standard)
at 50% of waveform w/ TTL Load or w/HCMOS
Load (>70.000MHz)
Rise Time / Fall Time
at 50% of waveform w/TTL Load or w/HCMOS Load
50 ±5(%) (Optional)
0.8VDC to 2.0VDC w/TTL Load or 20% to 80%
6 nSeconds Maximum
of Waveform w/HCMOS Load (≤70.000MHz)
4 nSeconds Maximum
0.8VDC to 2.0VDC w/TTL Load or 20% to 80%
of Waveform w/HCMOS Load (>70.000MHz)
Tri-State Input Voltage
VIH :No Connection
Enables Output
VIH :≥2.2VDC
Enables Output
VIL :≤0.8VDC
Disables Output: High Impedance
Aging (at 25°C)
±5ppm / year Maximum
Start Up Time
10 mSeconds Maximum
Load Drive Capability
≤70.000MHz
10TTL Load or 50pF HCMOS Load Maximum
>70.000MHz
5TTL Load or 15pF HCMOS Load Maximum
Period Jitter: Absolute
±250pSec Maximum, ±100pSec Typical
Period Jitter: One Sigma
±50pSec Maximum, ±30pSec Typical
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EH11
8 Pin DIP
5.0V
OS45
08/05
800-ECLIPTEK www.ecliptek.com for latest revision
62
Specifications subject to change without notice.
PART NUMBERING GUIDE
EH11 00 HS ET T TS - 70.000M - G TR
PACKAGING OPTIONS
Blank=Bulk (Standard),
TR= Tape & Reel (only offered with
Half Size G and Half Size G2 Options)
FREQUENCY TOLERANCE / STABILITY
00=±100ppm Max.(Standard), 45=±50ppm Max.
25=±25ppm Max., 20=±20ppm Max.
PACKAGE
HS=Half Size 8 Pin DIP
AVAILABLE OPTIONS
Blank=None (Standard)
CLXXX=Custom Lead Length (See Page 133)
G=Half Size Gull Wing (See Page 132)
G2=Half Size Gull Wing (See Page 132)
OPERATING TEMP. RANGE
Blank=0°C to 70°C (Standard), ET=-40°C to 85°C
DUTY CYCLE
Blank=50 ±10(%) (Standard), T=50 ±5(%)
FREQUENCY
OUTPUT CONTROL FUNCTION
TS=Tri-State Enable High
MECHANICAL DIMENSIONS
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
ALL DIMENSIONS IN MILLIMETERS
Pin 1 Locator for Gull Wing
(1) For “G” Option
Ø
Pin 1: Tri-State
Pin 4: Case Ground
Pin 5: Output
Pin 8: Supply Voltage
MARKING SPECIFICATIONS
Line 1: ECLIPTEK
Line 2: EH11 TS
Series Designator
700 Pieces Per Reel
Compliant to EIA-481A
Line 3: XX.XXX M
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
Frequency in MHz
(5 Digits Maximum + Decimal)
Line 4: XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
Note: Pin 1 shall be designated with a dot
Characteristic
Specification
Fine Leak Test
Gross Leak Test
Mechanical Shock
Vibration
Lead Integrity
Solderability
Temperature Cycling
Resistance to Soldering Heat
Resistance to Solvents
MIL-STD-883, Method 1014, Condition A
MIL-STD-883, Method 1014, Condition C
MIL-STD-202, Method 213, Condition C
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 2004
MIL-STD-883, Method 2002
MIL-STD-883, Method 1010
MIL-STD-883, Method 210
MIL-STD-883, Method 215
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EH11
8 pin DIP
5.0V
OS45
08/05
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
Similar pages