IPC PSU FSP600-60MRA(S) DESCRIPTION FSP600-60MRA(S) is an industrial level of switching power supply. The power supply comes to offer the total power capacity up to 600 Watts, and uses unique active PFC (Power Factor C orrection) circuit design with its high-load electrical components, makes it to be perfectly used in an industrial environment. In addition, with its full range of input and output electrical features, the power supply is ideally the best choice for server, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide. SAFETY STANDARD APPAOVAL APPLICATION OUTPUT SPECIFICATION For standard, advanced server and storage power system. Hold up Time: FEATURES Remarkable power density Excellent redundant PSU efficiency Well working performance at 50℃ (24 house running) Low ripple and noise Support OTP, OVP, OC P and SC P circuit protection C omply with FC C , C B, TUV, C E and C C C certification or declearation requirement Ouput Voltage Regulation: W ATTAGE Wattage: 600W Output Rise Time: DIMENSION Dimension: 190mm(L) x 150mm(W) x 84mm(H) Ripple & Noise: PRODUCT HIGHLIGHT Efficiency Level: Altitude: PMBus: 80 Plus Gold 5000M For standard, advanced server and storage power system. 115V/60Hz 16mSec. Minimum@85% Load, 230V/50Hz 16mSec. Minimum,@85% Load +3.3Vdc output : +3.9 Vdc minimum, + 4.8Vdc maximum +5Vdc output : +5.7 Vdc minimum, + 6.5Vdc maximum +12Vdc output : +13.3 Vdc minimum, + 16.7Vdc maximum 115V-rms/230V-rms 5V 20ms Maximum 115V-rms/230V-rms 12V 20ms Maximum 3.3V:50mV p-p 5V:50mV p-p 12V1:120mV p-p -12V:200mV p-p 5Vsb:50mV p-p -5V:200mV p-p INPUT SPECIFICATION ENVIRONMENTAL SPECIFICATION Input Range: Input Frequency: Input Current: TEMP.Range: 90-264 Vac 47-63 Hz 115V@ 10.0 Amps-rms maximum, 230V@ 5.0Amps-rms maximum MTBF: GENERAL SPECIFICATION Effciency: Voltage Regulation: 92% 230VAC +3.3V, +12V, +5V, +5SB: ±5% -12V, -5V: ±10% *Output Voltage and C urrent Rating +3.3V Ripple-Noise(R-P) mV 50mV Regulation Load % ±5% Output Max.(A) 20A Output Min.(A) 0.1A +5V 50mV ±5% 20A 0.1A +12V1 120mV ±5% 49A 1A -12V 200mV ±10% 0.5A 0A NOTES 5V, 3.3V, 12V, -12V Will gave the regulation to 10% when all load take off. Maximum combined current for the 12V outputs shall be 49A The +3.3V and +5V total output shall not exceed 130 watts. The total output shall not exceed 600 watts *-5V is optional MECHANICAL SPECIFICATION This content is subject to change, please refer to specification for m ore detail. FSP reserve the right to change the content without prior notice Storage Temperature: 20°C to + 80℃ The power supply have a minimum predicted MTBF(MIL-HDBK-217) of 100,000 hours of continuous operation at 25℃, maximum-output load, and nominal AC inout voltage -5V 200mV ±10% 0.3A 0A +5Vsb 50mV ±5% 3A 0A