RoHS Compliant USB-Disk ModuleⅡPlus Specification May 24, 2011 Version 1.1 Apacer Technology Inc. th 4 Fl., 75 Hsin Tai Wu Rd., Sec.1, Hsichih, New Taipei City, Taiwan 221 Tel: +886-2-2698-2888 www.apacer.com Fax: +886-2-2698-2889 USB-Disk ModuleⅡPlus AP-UMxxxxXXXXX-XXXXX FEATURES: • USB2.0 High-Speed and USB1.1 FullSpeed compatible interface • Capacity 256, 512 MB 1, 2, 4, 8 GB • – – – Fast sustained read performance Sustained read: 30 MB/s – Fast sustained write performance Sustained write: 25 MB/s • • • • – • Support Ready Boost for Windows Vista • – – – Support boot-up function for OS Windows XP Embedded Windows CE Linux – – – Temperature ranges 0°C to 70°C for operation (standard) 1 -40°C to 85°C for operation (ET ) -40°C to 100°C for storage – – Power consumption (typical) Active mode: 181 mA Sleep mode: 402 μA – Connector 10-pin (2x5) female header • Intelligent USB Module Implements dynamic wear-leveling algorithms to substantially increase longevity of flash media – BCH (24 bit) Error Detection Code/Error Correction Code (EDC/ECC) – Intrinsic data integrity after power loss – Wear leveling algorithm that provides more reliable data storage over an extended period – • • Extended Data Protection (Optional) – Write protection setting by jumper for prevention of data overwrites. Zero Power Data Retention Batteries not required for data storage • RoHS Compliant • Support Non-Removable Setting 2 1. Extended Temperature 2. Standard Temperature Exclusive 1 © 2011 Apacer Technology, Inc. Rev. 1.1 USB-Disk ModuleⅡPlus AP-UMxxxxXXXXX-XXXXX TABLE OF CONTENTS 1. General Description ..............................................................................3 1.1 Performance-optimized Controller....................................................................................................... 3 1.1.1 Power Management Unit (PMU) ...................................................................................................................3 1.1.2 SRAM Buffer .................................................................................................................................................3 1.1.3 Error Correction Code (ECC) ........................................................................................................................3 1.1.4 Wear-Leveling ...............................................................................................................................................3 1.1.5 Write Protection Mode (Optional) ..................................................................................................................3 2. Functional Block Diagram.....................................................................4 3. Pin Assignment......................................................................................5 3.1 Type A, Type B, Type C, and Type E.................................................................................................. 5 3.2 Type D﹙STD﹚................................................................................................................................... 6 3.3 Type D﹙LP﹚ ..................................................................................................................................... 7 4. Capacity Specifications ........................................................................8 4.1 Functional Specifications..................................................................................................................... 8 4.2 Environmental Specifications .............................................................................................................. 8 5. Electrical Specification ........................................................................9 5.1 AC Characteristics............................................................................................................................... 9 6. Physical Dimension .............................................................................10 6.1 Horizontal Design .............................................................................................................................. 10 6.1.1 Type A (STD 90D)......................................................................................................................................10 6.1.2 Type B (STD 90D-MH) ...............................................................................................................................11 6.1.3 Type C (STD 90D-MS) ...............................................................................................................................12 6.2 Vertical Design .................................................................................................................................. 13 6.2.1 Type D (STD 180D)....................................................................................................................................13 6.3 Low Profile Design............................................................................................................................. 14 6.3.1 Type D (LP 180D) .......................................................................................................................................14 6.3.2 Type E (LP 90D-MS) ...................................................................................................................................15 7. Product Ordering Information.............................................................16 7.1 Product Code Designation ................................................................................................................ 16 7.2 Valid Combinations............................................................................................................................ 17 7.2.1 Type A 7.2.2 Type B 7.2.3 Type C 7.2.4 Type D 7.2.5 Type D 7.2.6 Type E (STD 90D)......................................................................................................................................17 (STD 90D-MH) ...............................................................................................................................17 (STD 90D-MS) ...............................................................................................................................17 (STD 180D)....................................................................................................................................18 (LP 180D) ......................................................................................................................................18 (LP 90D-MS) ..................................................................................................................................18 2 © 2011 Apacer Technology, Inc. Rev. 1.1 USB-Disk ModuleⅡPlus AP-UMxxxxXXXXX-XXXXX 1. General Description Apacer’s USB-Disk Module (UDM) is a high performance, embedded solid state drive (SSD) designed to replace a conventional IDE hard disk drive. UDM SSD can be plugged into a standard Embedded USB connector commonly found in desktops, portable PC systems and industrial PC systems. This product is well suited for embedded flash storage applications offering new and expanded functionality as well as more cost-effective designs, better performance and increased reliability. 1.1 Performance-optimized Controller The heart of an UDM is the USB controller, which translates standard USB signals into the data and controls of the flash media. This proprietary USB controller is specifically designed to attain high data throughput from host to flash. 1.1.1 Power Management Unit (PMU) The power management unit (PMU) controls the power consumption of the UDM. It can dramatically extend product battery life by leaving the idle part of the circuitry into sleep mode. The PMU has zero wake-up latency. 1.1.2 SRAM Buffer The SRAM buffer is a key contributor to the USB controller performance. It optimizes data writes to the flash. 1.1.3 Error Correction Code (ECC) The UDM uses BCH Error Detection Code (EDC) and Error Correction Code (ECC) algorithms which correct up to 24 random single-bit errors for each 1024-byte block of data depending on spare area of flash memory. High performance is achieved through hardware-based error detection and correction. 1.1.4 Wear-Leveling Flash memory can be erased a limited number of times, This number is called the erase cycle limit, or write endurance limit, The erase cycle limit applies to each individual erase block in the flash device. In a typical application, and especially if a file system is used, specific pages are constantly updated (e.g., the page that contains the FAT, registry, etc.). Without any special handling, these pages would wear out more rapidly than other pages, reducing the lifetime of the entire flash. To overcome this inherent deficiency, Apacer’s USB-Disk Module (UDM) uses wear-leveling algorithm. This wear-leveling algorithm ensures that consecutive writes of a specific sector are not written physically to the same page in the flash. This spreads flash media usage evenly across all pages, thereby maximizing flash lifetime. The wear-leveling mechanism provides more than 100,000 write/erase cycles for reliable data storage over an extended period. 1.1.5 Write Protection Mode (Optional) When the device is configured to the Write-Protection mode, it enhances the data security and protection. This feature prevents the stored data from inadvertent system writes or erases, and viruses. 3 © 2011 Apacer Technology, Inc. Rev. 1.1 USB-Disk ModuleⅡPlus AP-UMxxxxXXXXX-XXXXX 2. Functional Block Diagram The USB-Disk Module (UDM) contains a controller, embedded firmware, and Flash Media with a female connector. The UDM interfaces with the host system allowing data to be written to and read from the Flash Media. Flash Media Host USB Interface Flash Management Controller Flash Media Figure 2-1: Functional block diagram 4 © 2011 Apacer Technology, Inc. Rev. 1.1 USB-Disk ModuleⅡPlus AP-UMxxxxXXXXX-XXXXX 3. Pin Assignment This chapter provides the information on the pin assignments and signal descriptions. 3.1 Type A, Type B, Type C, and Type E Table 3-1: Pin Assignment of the 10-pin configuration in Type A, Type B, Type C, and Type E Pin Signal Pin Signal 1 +5V 2 N.C 3 USB D- 4 N.C 5 USB D+ 6 N.C 7 GND 8 N.C 9 Key (Blocked) 10 N.C 5 © 2011 Apacer Technology, Inc. Rev. 1.1 USB-Disk ModuleⅡPlus AP-UMxxxxXXXXX-XXXXX 3.2 Type D﹙ ﹙STD﹚ ﹚ Table 3-2: Pin Assignment of the 10-pin configuration in Type D (STD) Pin Signal Pin Signal 1 +5V 2 +5V 3 USB D- 4 N.C 5 USB D+ 6 N.C 7 GND 8 GND 9 Key (Blocked) 10 GND 6 © 2011 Apacer Technology, Inc. Rev. 1.1 USB-Disk ModuleⅡPlus AP-UMxxxxXXXXX-XXXXX 3.3 Type D﹙ ﹙LP﹚ ﹚ Table 3-3: Pin Assignment of the 10-pin configuration in Type D (LP) Pin Signal Pin Signal 1 +5V 2 N.C 3 USB D- 4 N.C 5 USB D+ 6 N.C 7 GND 8 N.C 9 Key (Blocked) 10 N.C 7 © 2011 Apacer Technology, Inc. Rev. 1.1 USB-Disk ModuleⅡPlus AP-UMxxxxXXXXX-XXXXX 4. Capacity Specifications The USB-Disk Module product family is available as below table matrix. Table 4-1: Capacity Specification Density Total Bytes 256MB 254,509,056 512 MB 512,458,752 1GB 1,028,358,144 2GB 2,060,156,928 4GB 4,120,920,064 8GB 8,248,131,584 4.1 Functional Specifications Table 4-2: Performance Specifications Capacity 256 MB 512 MB / 1 GB 2 GB 4 GB 8 GB Sustained read (MB/s) 15 25 25 30 25 Sustained write (MB/s) 9 10 15 25 20 Performance 4.2 Environmental Specifications Environmental specification of the USB-Disk Module (UDM) product family which follows the MIL-STD810F standards is available as shown in Table 4-2. Table 4-2: Environmental Specifications Temperature Operation Storage 0°C to 70°C (Std.); -40°C to 85°C (Ext. Temp.) -40°C to 100°C Vibration 10 Hz to 500 Hz, 15G, 3 axes, 30 minutes (IEC 68-2-6) Shock Duration: 11 ms, 50G, 3 axes, 18 times (IEC 68-2-27) EMC FCC, CE 8 © 2011 Apacer Technology, Inc. Rev. 1.1 USB-Disk ModuleⅡPlus AP-UMxxxxXXXXX-XXXXX 5. Electrical Specification Caution: Absolute Maximum Stress Ratings – Applied conditions greater than those listed under “Absolute Maximum Stress Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these conditions or conditions greater than those defined in the operational sections of this data sheet is not implied. Exposure to absolute maximum stress rating conditions may affect device reliability. Table 5-1: Operating Range Range Ambient Temperature Voltage Standard Extended Temperature 0°C to 70°C -40°C to 85°C 4.5-5.5V Table 5-2: Absolute maximum power pin stress ratings Parameter Power Supply Input Voltage on any pin except VDD with respect to GND Symbol Min Max Unit VDD- VSS VIN -0.3 –ss - 0.3 5.5 VDD +0.3 V V 5.1 AC Characteristics Table 5-3: AC Characteristics Full Speed Parameter Symbol Min Typ Max Unit Rise Time TFR 4 ─ 20 ns Fall Time TFF 4 ─ 20 ns Differential Rise and Fall Time Matching TFRFM 90 111.11 % Driver Output Resistance ZDRV 28 44 Ω ─ Table 5-4: AC Characteristics High Speed Parameter Symbol Min Typ Max Unit Rise Time (10%~90%) THSR 500 ─ ─ ps Fall Time (10%~90%) THSF 500 ─ ─ ps Driver Output Resistance ZHSDRV 40.5 ─ 49.5 Ω 9 © 2011 Apacer Technology, Inc. Rev. 1.1 USB-Disk ModuleⅡPlus AP-UMxxxxXXXXX-XXXXX 6. Physical Dimension 6.1 Horizontal Design 6.1.1 Type A (STD 90D) Standard 90 degree Length 28.8mm Width 26.65mm Height (Max) 10.5 mm Unit: mm Tolerance: ±0.2 10 © 2011 Apacer Technology, Inc. Rev. 1.1 USB-Disk ModuleⅡPlus AP-UMxxxxXXXXX-XXXXX 6.1.2 Type B (STD 90D-MH) Standard 90 Degree Mounting Header Length 37.8mm Width 26.65mm Height (Max) 10.5 mm Unit: mm Tolerance: ±0.2 11 © 2011 Apacer Technology, Inc. Rev. 1.1 USB-Disk ModuleⅡPlus AP-UMxxxxXXXXX-XXXXX 6.1.3 Type C (STD 90D-MS) Standard 90 Degree Mounting Screw Length 37.8mm Width 26.65mm Height (Max) 10.5 mm Unit: mm Tolerance: ±0.2 12 © 2011 Apacer Technology, Inc. Rev. 1.1 USB-Disk ModuleⅡPlus AP-UMxxxxXXXXX-XXXXX 6.2 Vertical Design 6.2.1 Type D (STD 180D) Standard 180 Degree Length 37.3mm Width 26.65mm Height (Max) 8.5 mm Unit: mm Tolerance: ±0.2 13 © 2011 Apacer Technology, Inc. Rev. 1.1 USB-Disk ModuleⅡPlus AP-UMxxxxXXXXX-XXXXX 6.3 Low Profile Design 6.3.1 Type D (LP 180D) Low Profile 180 Degree Length 31.95mm Width 24mm Height (Max) 5 mm Unit: mm Tolerance: ±0.2 14 © 2011 Apacer Technology, Inc. Rev. 1.1 USB-Disk ModuleⅡPlus AP-UMxxxxXXXXX-XXXXX 6.3.2 Type E (LP 90D-MS) Low Profile 90 Degree Mounting Screw Length Write Protect 36.8mm Width 26.5mm Height (Max) 7.5 mm Read/Write Unit: mm Tolerance: ±0.2 15 © 2011 Apacer Technology, Inc. Rev. 1.1 USB-Disk ModuleⅡPlus AP-UMxxxxXXXXX-XXXXX 7. Product Ordering Information 7.1 Product Code Designation AP – UM xxxx X X X X X – XX XX X Flash Type: Blank: SA SLC T: Toshiba SLC Option: RB: Ready Boost WP: Write Protection NR: Non-Removable MS: Mounting Screw MH: Mounting Header S: Halogen-free Compliant R: RoHS Compliant Temperature: C: Commercial Temperature E: Extended Temperature PCB version Dimension 1 = 90D STD 2 = 180D STD 3 = 90D Low Profile 4 = 180D Low Profile Solution version Capacities: 256M = 256MB 512M = 512MB 001G = 1GB 002G = 2GB 004G = 4GB 008G = 8GB Model Name Apacer Product Code 16 © 2011 Apacer Technology, Inc. Rev. 1.1 USB-Disk ModuleⅡPlus AP-UMxxxxXXXXX-XXXXX 7.2 Valid Combinations 7.2.1 Type A (STD 90D) Standard 90 degree Capacity Standard Extended Temperature 256MB AP-UM256MN10CS AP-UM256MQ10ES 512MB AP-UM512MN10CS AP-UM512MQ10ES 1GB AP-UM001GN10CS AP-UM001GQ10ES 2GB AP-UM002GN10CS AP-UM002GQ10ES 4GB AP-UM004GN10CS AP-UM004GQ10ES 8GB AP-UM008GN10CS-T AP-UM008GQ10ES-T 7.2.2 Type B (STD 90D-MH) Standard 90 Degree Mounting Header Capacity Standard Extended Temperature 256MB AP-UM256MN10CS-MH AP-UM256MQ10ES-MH 512MB AP-UM512MN10CS-MH AP-UM512MQ10ES-MH 1GB AP-UM001GN10CS-MH AP-UM001GQ10ES-MH 2GB AP-UM002GN10CS-MH AP-UM002GQ10ES-MH 4GB AP-UM004GN10CS-MH AP-UM004GQ10ES-MH 8GB AP-UM008GN10CS-MHT AP-UM008GQ10ES-MHT 7.2.3 Type C (STD 90D-MS) Standard 90 Degree Mounting Screw Capacity Standard Extended Temperature 256MB AP-UM256MN10CS-MS AP-UM256MQ10ES-MS 512MB AP-UM512MN10CS-MS AP-UM512MQ10ES-MS 1GB AP-UM001GN10CS-MS AP-UM001GQ10ES-MS 2GB AP-UM002GN10CS-MS AP-UM002GQ10ES-MS 4GB AP-UM004GN10CS-MS AP-UM004GQ10ES-MS 8GB AP-UM008GN10CS-MST AP-UM008GQ10ES-MST 17 © 2011 Apacer Technology, Inc. Rev. 1.1 USB-Disk ModuleⅡPlus AP-UMxxxxXXXXX-XXXXX 7.2.4 Type D (STD 180D) Standard 180 Degree Capacity Standard Extended Temperature 256MB AP-UM256MN20CS AP-UM256MQ20ES 512MB AP-UM512MN20CS AP-UM512MQ20ES 1GB AP-UM001GN20CS AP-UM001GQ20ES 2GB AP-UM002GN20CS AP-UM002GQ20ES 4GB AP-UM004GN20CS AP-UM004GQ20ES 8GB AP-UM008GN20CS-T AP-UM008GQ20ES-T 7.2.5 Type D (LP 180D) Low Profile 180 Degree Capacity Standard Extended Temperature 256MB AP-UM256MN40CG AP-UM256MQ40EG 512MB AP-UM512MN40CG AP-UM512MQ40EG 1GB AP-UM001GN40CG AP-UM001GQ40EG 2GB AP-UM002GN40CG AP-UM002GQ40EG 4GB AP-UM004GN40CG AP-UM004GQ40EG 8GB AP-UM008GN40CG-T AP-UM008GQ40EG-T 7.2.6 Type E (LP 90D-MS) Low Profile 90 Degree Mounting Screw Capacity Standard Extended Temperature 256MB AP-UM256MN31CG-MS AP-UM256MQ31EG-MS 512MB AP-UM512MN31CG-MS AP-UM512MQ31EG-MS 1GB AP-UM001GN31CG-MS AP-UM001GQ31EG-MS 2GB AP-UM002GN31CG-MS AP-UM002GQ31EG-MS 4GB AP-UM004GN31CG-MS AP-UM004GQ31EG-MS 8GB AP-UM008GN31CG-MST AP-UM008GQ31EG-MST Note: Valid combinations are those products in mass production or will be in mass production. Consult your Apacer sales representative to confirm availability of valid combinations and to determine availability of new combinations. 18 © 2011 Apacer Technology, Inc. Rev. 1.1 USB-Disk ModuleⅡPlus AP-UMxxxxXXXXX-XXXXX Revision History Revision Description Date 1.0 Official Release May 16, 2011 1.1 Revised Capacity Specifications May 24, 2011 19 © 2011 Apacer Technology, Inc. Rev. 1.1 USB-Disk ModuleⅡPlus AP-UMxxxxXXXXX-XXXXX Global Presence Taiwan (Headquarters) Apacer Technology Inc. th th 4 Fl., 75 Xintai 5 Rd., Sec.1 Hsichih, New Taipei City Taiwan 221 R.O.C. Tel: +886-2-2698-2888 Fax: +886-2-2698-2889 [email protected] U.S.A. Apacer Memory America, Inc. 386 Fairview Way, Suite102, Milpitas, CA 95035 Tel: 1-408-586-1291 Fax: 1-408-935-9611 [email protected] Japan Apacer Technology Corp. 5F, Matsura Bldg., Shiba, Minato-Ku Tokyo, 105-0014, Japan Tel: 81-3-5419-2668 Fax: 81-3-5419-0018 [email protected] Europe Apacer Technology B.V. Europalaan 89 5232 BC 'S-Hertogenbosch The Netherlands Tel: 31-73-645-9620 Fax: 31-73-645-9629 [email protected] China Apacer Electronic (Shanghai) Co., Ltd 1301, No.251,Xiaomuqiao Road, Shanghai, 200032, China Tel: 86-21-5529-0222 Fax: 86-21-5206-6939 [email protected] India Apacer Technologies Pvt. Ltd. #143, 1st Floor, Raheja Arcade, 5th Block Kormangala Industrial Layout, Bangalore - 560095, India Tel: 91-80-4152-9061 [email protected] 20 © 2011 Apacer Technology, Inc. Rev. 1.1 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Apacer: AP-UM256MN10CS AP-UM256MN10CS-MH AP-UM256MN10CS-MS AP-UM256MN20CS AP-UM256MN40CG AP-UM256MN31CG-MS AP-UM256MQ10ES AP-UM256MQ10ES-MH AP-UM256MQ10ES-MS AP-UM256MQ20ES AP-UM256MQ40EG AP-UM256MQ31EG-MS AP-UM512MN10CS AP-UM512MN10CS-MH AP-UM512MN10CS-MS AP-UM512MN20CS AP-UM512MN40CG AP-UM512MN31CG-MS AP-UM512MQ10ES AP-UM512MQ10ES-MH APUM512MQ10ES-MS AP-UM512MQ20ES AP-UM512MQ40EG AP-UM512MQ31EG-MS AP-UM001GN10CS APUM001GN10CS-MH AP-UM001GN10CS-MS AP-UM001GN20CS AP-UM001GN40CG AP-UM001GN31CG-MS APUM001GQ10ES AP-UM001GQ10ES-MH AP-UM001GQ10ES-MS AP-UM001GQ20ES AP-UM001GQ40EG APUM001GQ31EG-MS AP-UM002GN10CS AP-UM002GN10CS-MH AP-UM002GN10CS-MS AP-UM002GN20CS APUM002GN40CG AP-UM002GN31CG-MS AP-UM002GQ10ES AP-UM002GQ10ES-MH AP-UM002GQ10ES-MS APUM002GQ20ES AP-UM002GQ40EG AP-UM002GQ31EG-MS AP-UM004GN10CS AP-UM004GN10CS-MH APUM004GN10CS-MS AP-UM004GN20CS AP-UM004GN40CG AP-UM004GN31CG-MS AP-UM004GQ10ES APUM004GQ10ES-MH AP-UM004GQ10ES-MS AP-UM004GQ20ES AP-UM004GQ40EG AP-UM004GQ31EG-MS APUM008GN10CS-T AP-UM008GN10CS-MHT AP-UM008GN10CS-MST AP-UM008GN20CS-T AP-UM008GN40CG-T AP-UM008GN31CG-MST AP-UM008GQ10ES-T AP-UM008GQ10ES-MHT AP-UM008GQ10ES-MST APUM008GQ20ES-T AP-UM008GQ40EG-T AP-UM008GQ31EG-MST