4 ITEM 3 CONNECTOR PART NO. 2 IPI CHECK DESCRIPTION 1 See Table 1 KR CONNECTOR 2 UL1061, 26 AWG BLUE 1 EOR CHECK Applicable Tooling BCD TABLE 1 ITEM 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 D C NUMBER OF CIRCUITS 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 CONNECTOR PART NO. 02KR-6S-P 03KR-6S-P 04KR-6S-P 05KR-6S-P 06KR-6S-P 07KR-6S-P 08KR-6S-P 09KR-6S-P 10KR-6S-P 11KR-6S-P 12KR-6S-P 13KR-6S-P 14KR-6S-P 15KR-6S-P 16KR-6S-P ASSEMBLY PART NUMBER A02KR02KR26E305A A03KR03KR26E305A A04KR04KR26E305A A05KR05KR26E305A A06KR06KR26E305A A07KR07KR26E305A A08KR08KR26E305A A09KR09KR26E305A A10KR10KR26E305A A11KR11KR26E305A A12KR12KR26E305A A13KR13KR26E305A A14KR14KR26E305A A15KR15KR26E305A A16KR16KR26E305A TOTAL WIRE REQUIRED 609.6 914.4 1,219.2 1,524.0 1,828.8 2,133.6 2,438.4 2,743.2 3,048.0 3,352.8 3,657.6 3,962.4 4,267.2 4,572.0 4,876.8 C (315.1 +/- 3.0) 304.8 +/- 3.0 1 D 1 PIN 1 2.0 PIN 1 2 B B SCALE 1: 1 DIMENSIONS CUSTOMER NAME All dimensions are in MM with a tolerance of +/- 3.0 unless otherwise specified. A DRAWN BY A DESCRIPTION 2.0 mm Pitch KR Stand ard Catalog Assembly - 12" Overall Len gth – Pin out: 1 to 1 ASSEMBLY PART NO. STEVEN PILKINGTON REV. DESCRIPTION 4 DATE 3 BY CUSTOMER PART NO. CHECK ED BY SEE TABLE 1 DRAWING NO. & REVISION JUSTIN BAKER 2 REVISED GAM-024 3/3/2016 1