GSI GS74104AGP-8I 1m x 4 4mb asynchronous sram Datasheet

GS74104ATP/J
SOJ, TSOP
Commercial Temp
Industrial Temp
8, 10, 12 ns
3.3 V VDD
Center VDD and VSS
1M x 4
4Mb Asynchronous SRAM
Features
SOJ 1M x 4-Pin Configuraton
• Fast access time: 8, 10, 12 ns
• CMOS low power operation: 120/95/85 mA at minimum
cycle time
• Single 3.3 V power supply
• All inputs and outputs are TTL-compatible
• Fully static operation
• Industrial Temperature Option: –40° to 85°C
• Package line up
J: 400 mil, 32-pin SOJ package
GJ:RoHS-compliant 400 mil, 32-pin SOJ package
TP: 400 mil, 44-pin TSOP Type II package
GP:RoHS-compliant 400 mil, 44-pin TSOP Type II
package
Description
The GS74104A is a high speed CMOS Static RAM organized
as 1,048,576 words by 4 bits. Static design eliminates the need
for external clocks or timing strobes. The GS operates on a
single 3.3 V power supply and all inputs and outputs are TTLcompatible. The GS74104A is available in 400 mil SOJ and
400 mil TSOP Type-II packages.
Pin Descriptions
A4
A3
A2
A1
A0
CE
DQ1
VDD
VSS
DQ2
WE
A19
A18
A17
A16
A15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
32-pin
400 mil SOJ
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
A5
A6
A7
A8
A9
OE
DQ4
VSS
VDD
DQ3
A10
A11
A12
A13
A14
NC
TSOP-II 1M x 4-Pin Configuration
NC
1
44
NC
NC
NC
2
3
43
42
NC
NC
A4
4
41
A5
A3
5
40
A6
A2
6
39
A7
7
38
A8
Symbol
Description
A1
A0
8
37
A9
A0–A19
Address input
CE
9
36
OE
DQ1–DQ4
Data input/output
DQ1
10
35
CE
Chip enable input
11
44-pin
DQ4
VDD
34
12
WE
Write enable input
400 mil TSOP II
33
VSS
VSS
DQ2
13
32
VDD
DQ3
OE
Output enable input
WE
14
31
A10
VDD
+3.3 V power supply
A19
15
30
A11
A18
16
29
A12
VSS
Ground
A17
17
28
A13
NC
No connect
A16
18
27
A15
19
26
A14
NC
Rev: 1.06 6/2006
NC
20
25
NC
NC
21
24
NC
NC
22
23
NC
1/11
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2001, GSI Technology
GS74104ATP/J
Block Diagram
A0
Address
Input
Buffer
Row
Decoder
Memory Array
Column
Decoder
A19
CE
WE
OE
I/O Buffer
Control
DQ1
DQ4
Truth Table
CE
OE
WE
DQ1 to DQ8
VDD Current
H
X
X
Not Selected
ISB1, ISB2
L
L
H
Read
L
X
L
Write
L
H
H
High Z
IDD
Note:
X: “H” or “L”
Rev: 1.06 6/2006
2/11
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2001, GSI Technology
GS74104ATP/J
Absolute Maximum Ratings
Parameter
Symbol
Rating
Unit
Supply Voltage
VDD
–0.5 to +4.6
V
Input Voltage
VIN
–0.5 to VDD +0.5
(≤ 4.6 V max.)
V
Output Voltage
VOUT
–0.5 to VDD +0.5
(≤ 4.6 V max.)
V
Allowable power dissipation
PD
0.7
W
Storage temperature
TSTG
–55 to 150
o
C
Note:
Permanent device damage may occur if Absolute Maximum Ratings are exceeded. Functional operation shall be restricted to Recommended
Operating Conditions. Exposure to higher than recommended voltages for extended periods of time could affect device reliability.
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Unit
Supply Voltage for -8/-10/-12
VDD
3.0
3.3
3.6
V
Input High Voltage
VIH
2.0
—
VDD +0.3
V
Input Low Voltage
VIL
–0.3
—
0.8
V
Ambient Temperature,
Commercial Range
TAc
0
—
70
oC
Ambient Temperature,
Industrial Range
TAI
–40
—
85
o
C
Notes:
1. Input overshoot voltage should be less than VDD +2 V and not exceed 20 ns.
2. Input undershoot voltage should be greater than –2 V and not exceed 20 ns.
Capacitance
Parameter
Symbol
Test Condition
Max
Unit
Input Capacitance
CIN
VIN = 0 V
5
pF
Output Capacitance
COUT
VOUT = 0 V
7
pF
Notes:
1. Tested at TA = 25°C, f = 1 MHz
2. These parameters are sampled and are not 100% tested.
Rev: 1.06 6/2006
3/11
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2001, GSI Technology
GS74104ATP/J
DC I/O Pin Characteristics
Parameter
Symbol
Test Conditions
Min
Max
Input Leakage
Current
IIL
VIN = 0 to VDD
– 1 uA
1 uA
Output Leakage
Current
ILO
Output High Z
VOUT = 0 to VDD
–1 uA
1 uA
Output High Voltage
VOH
IOH = –4mA
2.4
—
Output Low Voltage
VOL
ILO = +4mA
—
0.4 V
Power Supply Currents
Parameter
Symbol
Test Conditions
0 to 70°C
–40 to 85°C
8 ns
10 ns
12 ns
8 ns
10 ns
12 ns
IDD
CE ≤ VIL
All other inputs
≥ VIH or ≤ VIL
Min. cycle time
IOUT = 0 mA
120 mA
95 mA
85 mA
130 mA
105 mA
95 mA
Standby
Current
ISB1
CE ≥ VIH
All other inputs
≥ VIH or ≤VIL
Min. cycle time
30 mA
25 mA
22 mA
40 mA
35 mA
32 mA
Standby
Current
ISB2
CE ≥ VDD - 0.2V
All other inputs
≥ VDD - 0.2V or ≤ 0.2V
Operating
Supply
Current
Rev: 1.06 6/2006
10 mA
4/11
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
20 mA
© 2001, GSI Technology
GS74104ATP/J
AC Test Conditions
Output Load 1
Parameter
Conditions
Input high level
VIH = 2.4 V
Input low level
VIL = 0.4 V
50Ω
Input rise time
tr = 1 V/ns
VT = 1.4 V
Input fall time
tf = 1 V/ns
Input reference level
1.4 V
Output Load 2
Output reference level
1.4 V
3.3 V
Output load
Fig. 1& 2
DQ
589Ω
DQ
Notes:
1. Include scope and jig capacitance.
2. Test conditions as specified with output loading as shown in Fig. 1
unless otherwise noted.
3. Output load 2 for tLZ, tHZ, tOLZ and tOHZ
30pF1
5pF1
434Ω
AC Characteristics
Read Cycle
Parameter
Symbol
Read cycle time
-8
-10
-12
Unit
Min
Max
Min
Max
Min
Max
tRC
8
—
10
—
12
—
ns
Address access time
tAA
—
8
—
10
—
12
ns
Chip enable access time (CE)
tAC
—
8
—
10
—
12
ns
Output enable to output valid (OE)
tOE
—
3.5
—
4
—
5
ns
Output hold from address change
tOH
3
—
3
—
3
—
ns
Chip enable to output in low Z (CE)
tLZ*
3
—
3
—
3
—
ns
Output enable to output in low Z (OE)
tOLZ*
0
—
0
—
0
—
ns
Chip disable to output in High Z (CE)
tHZ*
—
4
—
5
—
6
ns
Output disable to output in High Z (OE)
tOHZ*
—
3.5
—
4
—
5
ns
* These parameters are sampled and are not 100% tested.
Rev: 1.06 6/2006
5/11
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2001, GSI Technology
GS74104ATP/J
Read Cycle 1: CE = OE = VIL, WE = VIH
tRC
Address
tAA
tOH
Data Out
Previous Data
Data valid
Read Cycle 2: WE = VIH
tRC
Address
tAA
CE
tAC
tHZ
tLZ
OE
tOE
Data Out
Rev: 1.06 6/2006
tOLZ
High impedance
tOHZ
DATA VALID
6/11
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2001, GSI Technology
GS74104ATP/J
Write Cycle
Parameter
Symbol
Write cycle time
-8
-10
-12
Unit
Min
Max
Min
Max
Min
Max
tWC
8
—
10
—
12
—
ns
Address valid to end of write
tAW
5.5
—
7
—
8
—
ns
Chip enable to end of write
tCW
5.5
—
7
—
8
—
ns
Data set up time
tDW
4
—
5
—
6
—
ns
Data hold time
tDH
0
—
0
—
0
—
ns
Write pulse width
tWP
5.5
—
7
—
8
—
ns
Address set up time
tAS
0
—
0
—
0
—
ns
Write recovery time (WE)
tWR
0
—
0
—
0
—
ns
Write recovery time (CE)
tWR1
0
—
0
—
0
—
ns
Output Low Z from end of write
tWLZ*
3
—
3
—
3
—
ns
Write to output in High Z
tWHZ*
—
3.5
—
4
—
5
ns
* These parameters are sampled and are not 100% tested.
Write Cycle 1: WE control
tWC
Address
tAW
tWR
OE
tCW
CE
tAS
tWP
WE
tDW
Data In
DATA VALID
tWHZ
Data Out
Rev: 1.06 6/2006
tDH
tWLZ
HIGH IMPEDANCE
7/11
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2001, GSI Technology
GS74104ATP/J
Write Cycle 2: CE control
tWC
Address
tAW
tWR1
OE
tAS
tCW
CE
tWP
WE
tDW
Data In
tDH
DATA VALID
Data Out
HIGH IMPEDANCE
32-Pin SOJ, 400 mil
Dimension in inch
L
D
e
A
A1
A
A2
1
GE
E
HE
c
y
B
B1
Detail A
Q
Dimension in mm
Symbol
min
nom
max
min
nom
max
A
—
—
0.146
—
—
3.70
A1
0.026
—
—
0.66
—
—
A2
0.105
0.110
0.115
2.67
2.80
2.92
B
0.013
0.017
0.021
0.33
0.43
0.53
B1
0.024
0.028
0.032
0.61
0.71
0.81
c
0.006
0.008
0.012
0.15
0.20
0.30
D
0.820
0.824
0.829
20.83
20.93
21.06
E
0.395
0.400
0.405
10.04
10.16
10.28
e
—
0.05
—
—
1.27
—
HE
0.430
0.435
0.440
10.93
11.05
11.17
GE
0.354
0.366
0.378
9.00
9.30
9.60
L
0.082
—
—
2.08
—
—
y
—
—
0.004
—
—
0.10
Q
0o
—
10o
0o
—
10o
Notes:
1. Dimension D& E do not include interlead flash.
2. Dimension B1 does not include dambar protrusion/intrusion.
3. Controlling dimension: inches
Rev: 1.06 6/2006
8/11
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2001, GSI Technology
GS74104ATP/J
44-Pin, 400 mil TSOP-II
Dimension in inch
D
c
22
e
B
y
L
L1
A1
A
A2
1
A
HE
23
E
44
Detail A
Rev: 1.06 6/2006
Q
Dimension in mm
Symbol
min
nom
max
min
nom
max
A
—
—
0.047
—
—
1.20
A1
0.002
—
—
0.05
—
—
A2
0.037
0.039
0.041
0.95
1.00
1.05
B
0.01
0.014
0.018
0.25
0.35
0.45
c
—
0.006
—
—
0.15
—
D
0.721
0.725
0.729
18.31
18.41
18.51
E
0.396
0.400
0.404
10.06
10.16
10.26
e
—
0.031
—
—
0.80
—
HE
0.455
0.463
0.471
11.56
11.76
11.96
L
0.016
0.020
0.024
0.40
0.50
0.60
L1
—
0.031
—
—
0.80
—
y
—
—
0.004
—
—
0.10
Q
0o
—
5o
0o
—
5o
Notes:
1. Dimension D& E do not include interlead flash.
2. Dimension B does not include dambar protrusion/intrusion.
3. Controlling dimension: mm
9/11
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2001, GSI Technology
GS74104ATP/J
Ordering Information
Part Number*
Package
Access Time
Temp. Range
Status
GS74104ATP-8
400 mil TSOP-II
8 ns
Commercial
MP
GS74104ATP-10
400 mil TSOP-II
10 ns
Commercial
MP
GS74104ATP-12
400 mil TSOP-II
12 ns
Commercial
MP
GS74104ATP-8I
400 mil TSOP-II
8 ns
Industrial
MP
GS74104ATP-10I
400 mil TSOP-II
10 ns
Industrial
MP
GS74104ATP-12I
400 mil TSOP-II
12 ns
Industrial
MP
GS74104AGP-8
RoHS-compliant 400 mil TSOP-II
8 ns
Commercial
PQ
GS74104AGP-10
RoHS-compliant 400 mil TSOP-II
10 ns
Commercial
PQ
GS74104AGP-12
RoHS-compliant 400 mil TSOP-II
12 ns
Commercial
PQ
GS74104AGP-8I
RoHS-compliant 400 mil TSOP-II
8 ns
Industrial
PQ
GS74104AGP-10I
RoHS-compliant 400 mil TSOP-II
10 ns
Industrial
PQ
GS74104AGP-12I
RoHS-compliant 400 mil TSOP-II
12 ns
Industrial
PQ
GS74104AJ-8
400 mil SOJ
8 ns
Commercial
MP
GS74104AJ-10
400 mil SOJ
10 ns
Commercial
MP
GS74104AJ-12
400 mil SOJ
12 ns
Commercial
MP
GS74104AJ-8I
400 mil SOJ
8 ns
Industrial
MP
GS74104AJ-10I
400 mil SOJ
10 ns
Industrial
MP
GS74104AJ-12I
400 mil SOJ
12 ns
Industrial
MP
GS74104AGJ-8
RoHS-compliant 400 mil SOJ
8 ns
Commercial
PQ
GS74104AGJ-10
RoHS-compliant 400 mil SOJ
10 ns
Commercial
PQ
GS74104AGJ-12
RoHS-compliant 400 mil SOJ
12 ns
Commercial
PQ
GS74104AGJ-8I
RoHS-compliant 400 mil SOJ
8 ns
Industrial
PQ
GS74104AGJ-10I
RoHS-compliant 400 mil SOJ
10 ns
Industrial
PQ
GS74104AGJ-12I
RoHS-compliant 400 mil SOJ
12 ns
Industrial
PQ
Notes:
1. Customers requiring delivery in Tape and Reel should add the character “T” to the end of the part number. For example: GS74104TP-8T.
2. MP = Mass Production. PQ = Pre-Qualification.
Rev: 1.06 6/2006
10/11
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2001, GSI Technology
GS74104ATP/J
4Mb Asynchronous Datasheet Revision History
Rev. Code: Old;
New
74104A_r1
Types of Changes
Format or Content
Content/Format
Page #/Revisions/Reason
• Created new datasheet
74104A_r1; 74104A_r1_01
Content
• Added 6 ns speed bin
• Updated all power numbers
74104A_r1_01; 74104A_r1_02
Content
• Updated Recommended Operating Currents on page 3
• Added 7 ns bin to entire document
• Add X package
74104A_r1_02; 74104A_r1_03
Content
• Removed 6 ns speed bin from entire document
• Removed all references to “X” package
74104A_r1_03; 74104A_r1_04
Content
• Removed 7 ns speed bin from entire document
74104A_r1_04; 74104A_r1_05
Content/Format
74104A_r1_05; 74104A_r1_06
Content6
Rev: 1.06 6/2006
• Updated format
• Added RoHS-compliant information for TSOP-II package
• Added RoHS-compliant 400 mil, 32-pin SOJ
11/11
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2001, GSI Technology
Similar pages